Análisis de la producción científica colombiana en medicina social y medicina básica Base de datos Thomson ISI (1975-2005)

En este documento se realiza una descripción de la producción científica colombiana en las disciplinas de medicina social y medicina básica para la base de datos Thompson ISI en el periodo comprendido entre 1975 y 2005. La caracterización de medicina social permite observar una baja producción de artículos internacionales de alto impacto propios de la disciplina, pues los artículos más citados siempre se encontraban clasificados en más de una disciplina; caso contrario al de medicina básica. De otra parte, se observa una alta concentración de los artículos de medicina social en publicaciones relacionadas con salud pública, siendo éstas una mayoría significativa dentro de la disciplina. A su vez, en las dos disciplinas es posible identificar una alta concentración de las citaciones en pocos artículos, siendo mayor en medicina social, reflejando un menor impacto promedio de las publicaciones en esta disciplina. Por último, los documentos más citados en medicina social se caracterizan por su interdisciplinariedad, colaboración internacional, interacción entre instituciones públicas y privadas, al igual que métodos no convencionales.

Tendencias de publicación en salud pública en Colombia: Una comparación internacional

El siguiente documento muestra las diferencias temáticas y metodológicas de la publicación internacional en salud pública con respecto a la producción científica de las revistas colombianas. Se seleccionaron 5 revistas, de alto impacto y con indización internacional de carácter general de salud pública en el período de 1991-2005, y se compararon por la complejidad de la metodologías utilizadas para el análisis de los datos y por los temas publicados en cada revista. Se revisaron un total de 2511 artículos de las revistas: European Journal of Public Health, American Journal of Public Health, Cadernos de Saúde Pública, Revista Nacional de Saud Pública, Revista de la Facultad Nacional de Saud Pública. En las metodologías se encontró: mayor presencia de estudios cuantitativos en revistas internacionales que en las nacionales, mayor porcentaje de revisiones en la publicación nacional, mayor utilización de metodologías cuantitativas innovadoras en las revistas internacionales, incluyendo Cuadernos de Saúde Pública. Las revistas internacionales, estandarizan la metodología de sus artículos en análisis bivariado y multivariado. Todas las publicaciones presentan un gran énfasis en lo local. En temas, la publicación nacional se centra en temas de salud infantil, salud mental, enfermedades transmisibles y zoonosis, salud sanitaria y ambiental y sistemas y políticas en salud.La publicación internacional en temas de determinantes socioeconómicos enfermedades crónicas no transmisibles y cáncer. Conclusiones: La publicación nacional se encuentra rezagada en el uso de metodologías cuantitativas complejas para el análisis de los problemas de salud. La brecha muestra que para las publicaciones nacionales existen barreras de entrada, relacionadas no solo con idioma sino con la complejidad de métodos cuantitativos empleados y para

Análise bibliométrica da produção tecnológica em biodiesel: contribuições para uma política em CT&I

This paper analyzes the international technological production on biodiesel using bibliometric indicators of patents. The data were gathered from Derwent Innovations Index, from 2000 to 2007. The evolution of patent registration by organizations and individuals was analyzed as well as the classification of inventions. The results are useful to visualize the dynamics of technological production on biodiesel and lay grounds for reflections on use of bibliometric indicators and for ST&I policy in the biodiesel field.

Brucite Microbialites in Living Coral Skeletons: Indicators of Extreme Microenvironments in Shallow-Marine Settings

Brucite [Mg(OH)2] microbialites occur in vacated interseptal spaces of living scleractinian coral colonies (Acropora, Pocillopora, Porites) from subtidal and intertidal settings in the Great Barrier Reef, Australia, and subtidal Montastraea from the Florida Keys, United States. Brucite encrusts microbial filaments of endobionts (i.e., fungi, green algae, cyanobacteria) growing under organic biofilms; the brucite distribution is patchy both within interseptal spaces and within coralla. Although brucite is undersaturated in seawater, its precipitation was apparently induced in the corals by lowered pCO2 and increased pH within microenvironments protected by microbial biofilms. The occurrence of brucite in shallow-marine settings highlights the importance of microenvironments in the formation and early diagenesis of marine carbonates. Significantly, the brucite precipitates discovered in microenvironments in these corals show that early diagenetic products do not necessarily reflect ambient seawater chemistry. Errors in environmental interpretation may arise where unidentified precipitates occur in microenvironments in skeletal carbonates that are subsequently utilized as geochemical seawater proxies.

Key performance indicators for measuring construction success

The construction industry is dynamic in nature. The concept of project success has remained ambiguously defined in the construction industry. Project success is almost the ultimate goal for every project. However, it means different things to different people. While some writers consider time, cost and quality as predominant criteria, others suggest that success is something more complex. The aim of this paper is to develop a framework for measuring success of construction projects. In this paper, a set of key performance indicators (KPIs), measured both objectively and subjectively are developed through a comprehensive literature review. The validity of the proposed KPIs is also tested by three case studies. Then, the limitations of the suggested KPIs are discussed. With the development of KPIs, a benchmark for measuring the performance of a construction project can be set. It also provides significant insights into developing a general and comprehensive base for further research.

Safety culture research, lead indicators, and the development of safety effectiveness indicators in the construction sector

Construction sector application of Lead Indicators generally and Positive Performance Indicators (PPIs) particularly, are largely seen by the sector as not providing generalizable indicators of safety effectiveness. Similarly, safety culture is often cited as an essential factor in improving safety performance, yet there is no known reliable way of measuring safety culture. This paper proposes that the accurate measurement of safety effectiveness and safety culture is a requirement for assessing safe behaviours, safety knowledge, effective communication and safety performance. Currently there are no standard national or international safety effectiveness indicators (SEIs) that are accepted by the construction industry. The challenge is that quantitative survey instruments developed for measuring safety culture and/ or safety climate are inherently flawed methodologically and do not produce reliable and representative data concerning attitudes to safety. Measures that combine quantitative and qualitative components are needed to provide a clear utility for safety effectiveness indicators.

Final report : feasibility study linking best value procurement assessment to outcome performance indicators

This feasibility study was established to investigate the application of the concept of ‘best value’ in construction procurement in Australia. In the case of ‘best value’ in the business enterprise, ‘best value’ is that which returns greatest value to the business enterprise’s shareholders. However, in the case of the public sector, ‘best value’ is more complex. For that reason, this research project focuses mainly on public sector construction project procurement.

Measuring behavioural indicators of self-esteem in the classroom

This study aimed to develop and validate an instrument to be used by teachers to measure the frequency of behaviors indicative of self-esteem and then to evaluate the instruments' reliability and concurrent validity. The Behavioral Indicators of Self-Esteem (BIOS) Scale proved to be a reliable and valid measure.

Firm social, cultural and intellectual capital : strategic indicators of international client satisfaction

Despite the increasing significance of the construction industry as an emerging sector of the Australian economy, there is inadequate research performed on construction design firms in terms of theoretical and empirical foundations. Although past research has identified the barriers and success factors for firm market entry, evidence suggests that to date no research has explicitly explored the sustainability of construction design firms in international markets. SMEs and their approach to firm internationalisation differ significantly from large manufacturing firms and a vast majority of construction design firms operate as SMEs. This paper develops a sustainable business model for construction design SMEs, which rely upon the development of clear Client Following (CF) versus Market Seeking (MS) strategies to support internal firm strategic and operational management. The understanding of these strategies is vital as the application of either will shape the design management approach of firms, which would in turn impact on the sustainability of these firms in foreign markets. Long-term sustainability of firms in international markets relies heavily upon client satisfaction. Client and project team participants’ communication during various design processes has often been problematic and the added difficulty of communicating across international boundaries further compounds the problem of capturing and maintaining client’s requirements. Therefore this paper develops a model for economic sustainability of Australian construction design firms working in international markets by exploring factors that affect client satisfaction across international boundaries, through the development of business performance indicators. These include not only the critical financial capital but also other ‘softer’ indicators, namely: social, cultural and intellectual capital. These act as a firm’s measure of success and the acquisition of this type of capital will provide significant advantages to firms’ success, hence sustainability in international markets.

Safety effectiveness indicators project workbook

The Safety Effectiveness Indicators (SEI) Project has used extensive research to determine what safety effectiveness measures can be developed by industry, for industry use to improve its safety performance. These indicators can measure how effectively the 13 safety management tasks1 (SMTs) selected for this workbook are undertaken. Currently, positive performance indicators (PPIs) are only able to measure the number of activities undertaken. They do not provide information on whether each activity is being undertaken effectively, and therefore do not provide data which can be used by industry to target areas of focus and improvement. The initial workbook contained six SMTs, and was piloted on various construction sites during August 2008. The workbook was refined through feedback from the pilot, and 13 SMTs were used in a field trial during the months of October, November and December 2008. The project team also carried out 12 focus groups in Brisbane, Canberra, Sydney and Melbourne during April, May and June 2008, and developed an initial format of this workbook through these groups and team workshops. Simplification of the language was a recurring theme, and we have attempted to do this throughout the project. The challenge has been to ensure we keep the descriptions short, to the point and relevant to all companies, without making them too specific. The majority of the construction industry participants also requested an alteration to the scale used, so a ‘Yes’/‘No’/’Not applicable’ format is used in this workbook. This workbook, based on industry feedback, is for use on site by various construction companies and contains 13 SMTs. However, you are invited to personalise the SEI tools to better suit your individual company and workplaces.