Cost Allocation Model for Distribution Networks Considering High Penetration of Distributed Energy Resources

The high penetration of distributed energy resources (DER) in distribution networks and the competitiveenvironment of electricity markets impose the use of new approaches in several domains. The networkcost allocation, traditionally used in transmission networks, should be adapted and used in the distribu-tion networks considering the specifications of the connected resources. The main goal is to develop afairer methodology trying to distribute the distribution network use costs to all players which are usingthe network in each period. In this paper, a model considering different type of costs (fixed, losses, andcongestion costs) is proposed comprising the use of a large set of DER, namely distributed generation(DG), demand response (DR) of direct load control type, energy storage systems (ESS), and electric vehi-cles with capability of discharging energy to the network, which is known as vehicle-to-grid (V2G). Theproposed model includes three distinct phases of operation. The first phase of the model consists in aneconomic dispatch based on an AC optimal power flow (AC-OPF); in the second phase Kirschen’s andBialek’s tracing algorithms are used and compared to evaluate the impact of each resource in the net-work. Finally, the MW-mile method is used in the third phase of the proposed model. A distributionnetwork of 33 buses with large penetration of DER is used to illustrate the application of the proposedmodel.

Volume estimation from multiplanar 2D ultrasound images using a remote electromagnetic position and orientation sensor

A system is described for calculating volume from a sequence of multiplanar 2D ultrasound images. Ultrasound images are captured using a video digitising card (Hauppauge Win/TV card) installed in a personal computer, and regions of interest transformed into 3D space using position and orientation data obtained from an electromagnetic device (Polbemus, Fastrak). The accuracy of the system was assessed by scanning 10 water filled balloons (13-141 ml), 10 kidneys (147  200 ml) and 16 fetal livers (8  37 ml) in water using an Acuson 128XP/10 (5 MHz curvilinear probe). Volume was calculated using the ellipsoid, planimetry, tetrahedral and ray tracing methods and compared with the actual volume measured by weighing (balloons) and water displacement (kidneys and livers). The mean percentage error for the ray tracing method was 0.9 ± 2.4%, 2.7 ± 2.3%, 6.6 ± 5.4% for balloons, kidneys and livers, respectively. So far the system has been used clinically to scan fetal livers and lungs, neonate brain ventricles and adult prostate glands.

Identifying weak linear features with the "coalescing shortest path image transform"

The detection of line-like features in images finds many applications in microanalysis. Actin fibers, microtubules, neurites, pilis, DNA, and other biological structures all come up as tenuous curved lines in microscopy images. A reliable tracing method that preserves the integrity and details of these structures is particularly important for quantitative analyses. We have developed a new image transform called the "Coalescing Shortest Path Image Transform" with very encouraging properties. Our scheme efficiently combines information from an extensive collection of shortest paths in the image to delineate even very weak linear features. © Copyright Microscopy Society of America 2011.

Spherical aberration and its correction using Lie algebraic methods

We discuss three methods to correct spherical aberration for a point to point imaging system. First, results obtained using Fermat's principle and the ray tracing method are described briefly. Next, we obtain solutions using Lie algebraic techniques. Even though one cannot always obtain analytical results using this method, it is often more powerful than the first method. The result obtained with this approach is compared and found to agree with the exact result of the first method.

宽光束进入展宽器提高输出脉冲对比度分析

根据分析啁啾脉冲对比度模型,通过光线追迹法详细分析了展宽器对输出脉冲对比度的影响.发现当扩大进入展宽器的入射光束口径,从2mm扩大到40mm时,输出脉冲的对比度提高了近两个数量级;同时发现在相同条件下,当输入脉冲为双曲正割函数时,其输出脉冲的对比度明显好于输入脉冲为高斯脉冲和矩形脉冲的情形。

LD侧面泵浦固体激光器泵浦光分布模拟

利用Gauss光束通过光学系统的变换规律,将激光二极管阵列发出的光作为Gauss光束处理.应用矩阵光学方法,解析分析与数值模拟相结合,给出了激光二极管阵列侧面泵浦棒状固体激光介质内泵浦光的强度分布.比较了侧面环绕激光二极管阵列数量不同时泵浦光分布的均匀性;以及考虑准直系统后,不同准直透镜焦距时,晶体内泵浦光半径的大小;同时针对泵浦光在晶体内聚焦时的情况进行了简单讨论.将半解析法与光线追迹法所得结果进行了比较,二者十分相近,但前者计算要简单得多.

Numerical research of heat generation in flashlamp-pumped Nd : glass disk amplifiers

The heat generation in a flashlamp-pumped Nd:glass disk amplifier is studied by the simulation of the whole pumping process, which is based on the ray-tracing method. The results of temperature rise distribution as well as gain distribution are presented. The evolution of heat generation in disk during the pumping process is discussed in detail. Some main factors related with the thermal effect, such as the quantum efficiency, fluorescence lifetime, and pulse duration, are investigated through studying the ratio of the heat generation to energy storage in the gain medium. The influence of each parameter on heat generation is studied carefully, and the results provide ways to decrease the heat generation during the pumping process. (c) 2005 Society of Photo-Optical Instrumentation Engineers.

锯齿形板条抽运结构的热效应数值比较

激光二极管抽运的全固态激光器中,除了激光介质的温度分布和热透镜效应以外,抽运、冷却结构对获得高光束质量、高功率激光输出至关重要。基于热传导方程,在相同的抽运功率和传导冷却边界条件下,对单侧面抽运锯齿形(zigzag)板条、单侧面键合锯齿形板条、部分抽运板条三种不同抽运结构的温度分布、热致应力、温度导致的折射率变化进行了详细的分析,并通过光线追迹方法,比较了光束在锯齿形面内和垂直于锯齿形面内的光程差,由光程差曲线分析了激光束的热透镜效应。对三种抽运结构的端面温度、端面变形和端面变形导致的光程差也进行了对比分

Velocity profiles in a cylindrical liquid jet by reconstructed velocimetry

An experimental setup and a simple reconstruction method are presented to measure velocity fields inside slightly tapering cylindrical liquid jets traveling through still air. Particle image velocimetry algorithms are used to calculate velocity fields from high speed images of jets of transparent liquid containing seed particles. An inner central plane is illuminated by a laser sheet pointed at the center of the jet and visualized through the jet by a high speed camera. Optical distortions produced by the shape of the jet and the difference between the refractive index of the fluid and the surrounding air are corrected by using a ray tracing method. The effect of the jet speed on the velocity fields is investigated at four jet speeds. The relaxation rate for the velocity profile downstream of the nozzle exit is reasonably consistent with theoretical expectations for the low Reynolds numbers and the fluid used, although the velocity profiles are considerably flatter than expected. © 2012 American Society of Mechanical Engineers.

Analysis of the lateral displacement and optical path difference in wide-field-of-view polarization interference imaging spectrometer

The mechanism of beam splitting and principle of wide-field-of-view compensation of modified Savart polariscope in the wide-field-of-view polarization interference imaging spectrometer (WPIIS) are analyzed and discussed. Formulas for the lateral displacement and optical path difference (OPD) produced by the modified Savart polariscope are derived by ray-tracing method. The theoretical and practical guidance is thereby provided for the study, design, modulation, experiment and engineering of the polarization interference imaging spectrometers and other birefringent Fourier-transform spectrometers based on Savart polariscopes. (c) 2006 Elsevier B.V. All rights reserved.

Design of side-pumped Nd : YAG lasers

Design of the typical laser diode side-pumped Nd:YAG rod system has been discussed using the conventional ray tracing method in this paper. Firstly introduce two basic matrices, refractional and translational matrix, described the transmission of nonparaxial light ray in the medium without concerning the absorption of light. And then, using those matrices, analyze the distribution of pump light in the crystal respectively under the condition of directly pumped system and indirectly pumped system with a cylindrical quartz rod as focusing lens. From the result of simulation, we compare the advantage and disadvantage of the two pumped method, and mainly consider how to select the diameter of the focus lens and cooling tube, indicate the effect of deionized water and cooling tube have on the pump light distribution in the active material. At last, make some conclusions about the side-pumped Nd:YAG laser system.

链霉菌S227抗耐药菌活性成分的研究

本论文以从四川峨嵋山森林土壤中分离筛选获得的一株产抗耐药性活性化合物的链霉菌S227为材料，对发酵液中活性物质的分离纯化及抗耐药性活性进行了研究。 建立了抗耐药性活性的定性、定量检测方法。建立的管蝶法活性定量检测的标准回归方程为：D=4.8229Ln(C)+3.6326 R=0.9972 ；纸片法活性定量检测的标准回归方程为：D=5.5Ln(C)-12.794 R=0.999。 根据建立的样品活性的检测方法，测定了发酵液的初始活性。实验证明活性物质的温度、pH稳定性好。 通过活性的定性、定量追踪方法，分别利用等体积的石油醚、乙酸乙酯、正丁醇在不同的pH梯度下萃取，确定了pH3条件下正丁醇能最大程度的萃取活性物质，说明活性物质极性很大。对正丁醇萃取相经过两次硅胶柱层析及薄层层析分离得到具有抗耐药菌活性的纯化样品S227-4。 经过核磁共振氢谱、碳谱数据分析初步确定S227-4为四聚糖，通过糖的水解实验初步确定S227-4由葡萄糖和半乳糖组成。 纸片法活性检测表明S227-4具有抗耐药菌活性。采用MIC测定法对该样品抗耐药活性进行研究。在证明该样品本身不具有抗菌活性的基础上，以临床分离的耐药性金黄色葡萄球菌为指示菌，考察了该样品与抗生素联合使用时对耐药菌抗生素MIC（最小抑菌浓度）值的影响，结果表明在不影响菌体生长的浓度条件下，该样品能明显降低多株耐药菌对多种抗生素的MIC值，不同程度地恢复所测试耐药菌对相应抗生素的敏感性。如S227-4与青霉素钠联用可以使S. aureus 12352的MIC降低8倍，而与红霉素联用可以使S. aureus 12334的MIC降低128倍。 The purification process and the activity of the anti bacterial drug resistance compounds produced by Streptomyces S227 isolated from the forest soil sample of the Mountain E’MEI in Sichuan Province were studied in this thesis. Quantitative and qualitative activity assay methods of the active compounds were established. The regression equation of the tube method was D=4.8229Ln(C)+3.6326, R=0.9972. The regression equation of the paper method was D=5.5Ln(C)-12.794, R=0.999. According to the established activity assay method, the incipient activity of the broth was evaluated. And it was proved that the stability of the active compounds was good. By quantitative and qualitative activity tracing method, petroleum ether, ethyl acetate and butanol were used to extract the active compounds at different pH. The result showed that butanol was the most effective agent for active component recovery at pH3. From the butanol extraction a purified sample, S227-4, was isolated by silica gel column chromatography and thin-layer chromatography . S227-4 was proved to be a tetra- saccharide by 1H-NMR and 13C-NMR. And its monosaccharides include glucose and galactose by hydrolysate analysis. The anti-drug resistant activity of S227-4 was tested in vitro by MICs assay using different drug resistant Staphylococcus aureus strains isolated clinically. The sample itself showed no anti-microbial activity in growth inhibitory experiment, but when it was used together with different antibiotics, it could remarkably decrease the MICs of different clinically isolated drug-resistant bacterial strains to these antibiotics. For example, when S227-4 was used with penicillin, the MIC of S. aureus 12352 decreased 8 times compared with that when penicillin was used alone. Meanwhile when it was used with erythromycin the MIC of S. aureus 12334 deceased 128 times compared with erythromycin alone.

井间地震速度层析成像方法与软件系统

Crosshole Seismic tomography has been broadly studied and applied in the fields of resource exploration and engineering exploration because of its special observing manner and better resolution than normal seismic exploration. This thesis will state the theory and method of Crosshole Seismic tomography. Basing on the previous studies，the thesis studied the initial velocity model，ray-tracing method, and developed the three-dimension tomography software. All the cells that a ray passes through are of the same velocities if the paths from transmitters to receivers are straight. The cells that the each ray passes through are recorded, and rays that pass through each cell are calculated. The ray average velocity which passes through a cell is set as the cell velocity. Analogously we can make a initial node velocity model because the velocity sum is calculated on the all cells which own to a certain node, and the cell number is summed about each nodes，the ratio of the velocity sum to the all cells number is set as the node velocity. The inversion result from the initial node velocity model is better than that of the average velocity model. Ray-bending and Shortest Path for Rays (SPR) have shortcomings and limitations respectively. Using crooked rays obtained from SPR rather than straight lines as the starting point can not only avoid ray bending converging to the local minimum travel time path, but also settle the no smooth ray problem obtained by SPR. The hybrid method costs much computation time, which is roughly equal to the time that SPR expends. The Delphi development tool based on the Object Pascal language standard has an advantage of object-oriented. TDTOM (Three Dimensions Tomography) was developed by using Delphi from the DOS version. Improvement on the part of inversion was made, which bring faster convergence velocity. TDTOM can be used to do velocity tomography from the first arrival travel time of the seismic wave, and it has the good qualities of friendly user interface and convenient operation. TDTOM is used to reconstruct the velocity image for a set of crosshole data from Karamay Oil Field. The geological explanation is then given by comparing the inversion effects of different ray-tracing methods. High velocity zones mean the cover of oil reservoir, and low velocity zones correspond to the reservoir or the steam flooding layer.

旋转轴对称弱各向异性介质模型的射线追踪方法

Ray tracing is a rapid and effective method for wave field calculation. Not only in the field of seismic-wave theory, but also in the field of seismic inversion and migration imaging,the seismic ray tracing method has become one of the most important methods. In anisotropic media, group velocity and phase velocity have different propagation directions. The seismic wave propagates along the direction of group velocity , it does not depend on the direction of phase velocity. Ray angle is a complex function with respect to phase angle, it is difficult to measure and calculate. But most rocks are weak anisotropic, so the expression of phase velocity can be simplified greatly. Based on the approximate expression of phase velocity this thesis for rotating axisymmetric weak anisotropic media deduces an expression of the partial derivative of phase velocity and an expression of group velocity with the method of linear approximation. This paper uses the fourth order Runge-Kutta method together with the two-dimensional interpolation and linear interpolation to obtain the parameters of the physical locations. At last the paths of seismic wave in rotating axisymmetric weak anisotropic media are computed. According to the analysis of the computational results, it indicates that the method developed in this paper has strong adaptability, high computational efficiency and high accuracy for rotating axisymmetric weak anisotropic media.