高Jc Ag-Bi-Pb-Sr-Ca-Cu-O超导材料

Bi_2Sr_2Ca_2Cu_3O_y-Ag_x、Bi_(1.7)Pb_(0.3)Sr_2Ca_2Cu_3O_y-Ag_x和Bi_(1.7)Pb_(0.3)Sr_2Ca_2Cu_(3.2)O_y-Ag_x系列的超导材料是用固相反应的方法合成的。原料为分析纯AgNO_3、PbO、Bi_2O_3、CaCO_3、SrCO~3和CuO。把试剂按所需配比混和研磨后,在800℃烧12h,研磨压片,片子在850℃烧结200h,破碎、研磨后,按配比加入AgNO_3·800℃灼烧12h,再次研磨、压片,850℃再烧结200h,炉冷至室温。

组成和制备条件对Bi-Pb-Sr-Ca-Cu-O材料超导电性的影响

制备了一系列 Bi—Pb—Sr—Ca—Cu—O 超导材料。在一定范围内,不同组分的 Bi—Pb—Sr—Ca—Cu—O 样品都能得到接近单110K 相的材料,但样品性能差别极大.性能的好坏极大地依赖着组成条件。烧结温度过高或过低都不利于提高样品的临界电流密度,850℃的烧结温度是较合适的,长时间烧结有利于110K 相的形成。样品烧结完成后,应缓慢降温退火,以保证材料充分吸氧。

Bi-Sr-Ca-Cu-O体系中可能存在一个新的高T_c超导相

最近,Pb能加强BiSrCaCuO超导体中高T_c相(即2223相,其c(?)37,T_c(?)110K)的出现和掺入sb形成BiPbSbSrCaCuO的T_c可以达到132 K已见报道,我们希望通过其它元素的掺杂取代也出现类似的结果。我们做了大量掺Sb、Ba、In的实验,通过改变

Reaction products between Bi-Sr-Ca-Cu-oxide thick films and alumina substrates

The structure and composition of reaction products between Bi-Sr-Ca-Cu-oxide (BSCCO) thick films and alumina substrates have been characterized using a combination of electron diffraction, scanning electron microscopy and energy dispersive X-ray spectrometry (EDX). Sr and Ca are found to be the most reactive cations with alumina. Sr4Al6O12SO4 is formed between the alumina substrates and BSCCO thick films prepared from paste with composition close to Bi-2212 (and Bi-2212 + 10 wt.% Ag). For paste with composition close to Bi(Pb)-2223 + 20 wt.% Ag, a new phase with f.c.c. structure, lattice parameter about a = 24.5 A and approximate composition Al3Sr2CaBi2CuOx has been identified in the interface region. Understanding and control of these reactions is essential for growth of high quality BSCCO thick films on alumina. (C) 1997 Elsevier Science S.A.

Partial melt processing and electrical properties of Bi-Sr-Ca-Cu-o superconducting thick films on (100) MgO substrates

Superconducting thick films of Bi2Sr2CaCu2Oy (Bi-2212) on single-crystalline (100) MgO substrates have been prepared using a doctor-blade technique and a partial-melt process. It is found that the phase composition and the amount of Ag addition to the paste affect the structure and superconducting properties of the partially melted thick films. The optimum heat treatment schedule for obtaining high Jc has been determined for each paste. The heat treatment ensures attainment of high purity for the crystalline Bi-2212 phase and high orientation of Bi-2212 crystals, in which the c-axis is perpendicular to the substrate. The highest Tc, obtained by resistivity measurement, is 92.2 K. The best value for Jct (transport) of these thick films, measured at 77 K in self-field, is 8 × 10 3 Acm -2.

Microstructural investigation of Bi-Sr-Ca-Cu-oxide thick films on alumina substrates

The microstructure of Bi-Sr-Ca-Cu-oxide (BSCCO) thick films on alumina substrates has been characterized using a combination of X-ray diffractometry, scanning electron microscopy, transmission electron microscopy of sections across the film/substrate interface and energy-dispersive X-ray spectrometry. A reaction layer formed between the BSCCO films and the alumina substrates. This chemical interaction is largely responsible for off-stoichiometry of the films and is more significant after partial melting of the films. A new phase with fee structure, lattice parameter a = 2.45 nm and approximate composition Al3Sr2CaBi2CuOx has been identified as reaction product between BSCCO and Al2O3.

Oxygen mobility in Bi:Sr:Ca:Cu:O ceramic measured using anelastic relaxation methods

Since the discovery of YBaCuO, experiments have shown that its superconducting properties are strongly affected by the oxygen content. More recently, anelastic relaxation measurements in La2CuO4+δ, showed that the decrease in the oxygen content can be related to two events. One is the decrease in mobility between two adjacent CuO planes, and the other is the increase in the number of tilting patterns of the CuO6 octahedra. In the case of the bismuth-based ceramic, it is known that the oxygen content, within some limits, does not affect its superconducting properties. In order to evaluate the mobility and the effect of the oxygen content on this material we have prepared BSCCO ceramic and tested regarding its internal friction and electrical resistivity as a function of the temperature while the oxygen content was being reduced by a sequence of vacuum annelaing at 620 K. The samples were prepared in the Bi:Sr:Ca:Cu = 2212 and 2223 proportion, using powder obtained by the sol-gel route and conventional solid state reaction. The anelastic relaxation measurements were performed using a torsion pendulum operating with frequency about 15-35 Hz between 77 to 700 K. The diffraction pattern of the as sintered and the vacuum annealed material were also presented. The results have shown complex anelastic relaxation structures that were associated to the jump of interstitial oxygen atoms between two adjacent CuO planes. The vacuum annealing showed to be deleterious to the critical temperature of the superconducting ceramic.

Magnetic and electric properties of Bi(La)Sr(Ca)Mn2O6

Bi1-xLaxSrMn2O6 and BiSr1-xCaxMn2O6 are prepared by solid state reaction. They are n-type semiconductors with ferromagnetism at room temperture. When Bi is substituted partly by rare earth, a negative magnetoresistance effect is observed in the pellet of Bi1-xLaxSrMn2O6. There are semiconductor-metal transitions at 820 K in BiSrMn2O6. The transitions are attributed to the magnetic transition at high temperature. The substitution of Ca for Sr makes the transition temperature increase. However, when Bi is partly substituted by La, the solid solution does not change into metal. (C) 1996 Academic Press, Inc.

SUPERCONDUCTIVITY IN BI1.5PB0.4SBXSR2CA2CU2OY SYSTEM (X=0-0.32)

The effect of doping with various amount of Sb (0.06-0.32) to (Bi,Pb):Sr:Ca:Cu = 1:1:1:1 system were studied with XRD and Tc measurements. The presence of Sb promotes the conversion of low Tc phase (2212 phase) to high Tc phase (2223 phase) and at around Sb = 0.18 the 2212 phase nearly completely disappears; but at the same time a new phase of unknown structure appears even with Sb = 0.06 showing that the incorporation of Sb into the Bi-based superconducting phase is of very low concentration. Tc measurements show that the optimum concentration of Sb-doping is around 0.10 and that unknown phase has an adverse effect to the superconducting properties; a composition disproportion at the surface of pellet was observed.

Estudo de filmes supercondutores para aplicações em dispositivos eletrônicos

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Investigations of superconducting bismuth cuprates of the general formula Bi2-xPbx(Ca,Sr,Y)n 1 Cun O2n 4 δ

In the (Bi,Pb)-Sr-Cu-O system we have examined many compositions which are either metallic or semiconducting. In the Bi2-xPbx(Ca, Sr)n+1 Cun O2n+4+δ system, we have established the superconducting properties of the n = 1 to 4 members. The Tc increases from n = 1 to 3 and does not increase further when n = 4. In Bi2Ca1-x,YxSr2Cu2Oy, the Tc decreases with increase in x.

M_2RSbO_6:R~(3+)复合氧化物的合成组成结构和性能的研究(M = Ba、Sr、Ca, R = La、Gd、Y、Bi, R' = Sm、Eu、Dy、Ho、Er、Tm)

对于稀土与非稀土所组成的二元复合氧化物的研究国外已有较多的报导。但是，对于稀土和锑的复合氧化物只是近年来才开始有些研究工作。含锑与稀土的多元复合氧化物的报导就更少。本文在我们实验室张静筠等人三元复合氧化物研究的基础上，开展Mo—Sb_2O_5—R_2O_3—R'_2O_3—Bi_2O_3多元体系的研究工作，这对于我国丰产元素稀土和锑的应用以及利用Bi~(3+)的激活与敏化将是有益的。本文按Thornton等人的方法合成了Ba_2BiSbO_6，Ba_2GdSbO_6，按EγΦECEHKO等人的方法合成了M_2RSbO_6 (M = Ba、Sr、Ca, R = La Y)。并以M_2RSbO_6为基质，掺Sm~(3+)、Eu~(3+)、Dy~(3+)、Ho~(3+)、Er~(3+)、Tm~(3+)和Bi~(3+)，研究它们的化学组成，晶体结构与发光性能的关系及规律，Bi~(3+)的荧光和敏作用。同时研究了它们的磁学和热学性能。化学组成的分析结果表明，计算的含量与实验测得的含量符合较好，说明化学反应是按化学计量比进行的。通过X-射线粉沫物相分析和晶胞参数的理论计算确定M_2RSbO_6(M = Ba、Sr、R = La、Y、Gd、Bi)复合氧化物是属于立方钙钛太型化合物。空间群为Fm3m，点群为Oh。用计算机计算了Ca_2YSbO_6的晶胞参数并结合荧光光谱分析确定它属于畸变的单斜钙钛矿，空间群为P_(21)。用磁天平测量了样品M_2RSbO_6 (M = Ba、Sr、Ca; R = Gd、Y、Bi)的磁化率。除Ba_2GdSbO_6是顺磁性物质外共余的都是反磁性的物质。按所用原料Sb_2O_5计算的磁化率与测量值符合较好，表明在所研究的M_2RSbO_6化合物中锑是正五价的。用热重热差分析仪测量了样品在反应中的热性能，观察到在化合物形成的过程中所用原料Sb_2O_3大约在520 ℃左右氧化变为Sb_2O_5。除所用原料碳酸盐分解外没有挥发性的物质，这就进一步证明化学组成分析和磁化率测量的结果是正确的。光学测量的结果表明，所有的磷光体随着激活离子浓度的不同其光谱都发生规律性的变化。对于不同Eu~(3+)浓度的Ba_2YSbO_6:Eu~(3+)和Br_2YSbO_6:Eu~(3+), Bi~(3+)体系用254nm激发时均能观察到Eu~(3+)于595nm的尖峰发射。用基质和Bi~(3+)的激发峰325nm激发时，明显地看到敏化剂Bi~(3+)到Eu~(3+)的能量传递，使Eu~(3+)于595nm的发射大大增强，我们认为Bi~(3+)对Eu~(3+)的敏化作用是由于基质和Bi~(3+)的~1S。→ 3P_1的跃迁吸收了激发的能量，然后无辐射弛豫到Eu~(3+)的激发态~5D_0，产生~5D_0 → 7F_1的磁偶极跃迁。对于不同Eu~(3+)浓度的Sr_2YSbO_6:Eu~(3+)和Sr_2YSbO_6:Eu~(3+), Bi~(3+)体系用245nm激发时均能观察到Eu~(3+)于595nm的尖峰发射。用基质和Bi~(3+)的激发峰335nm激发时，观察到基质和Bi~(3+)对Eu~(3+)具有某种能量传递。敏化作用机理与上述的Ba_2YSbO_6:Eu~(3+)和Ba_2YSbO_6:Eu~(3+), Bi~(3+)体系相同。对于不同Eu~(3+)浓度的Ca_2YSbO_6:Eu~(3+)和Ca_2YSbO_6:Eu~(3+), Bi~(3+)体系用396nm激发时，均能观察到Eu~(3+)于613nm很强的尖峰发射。用基质和Bi~(3+)的激发峰313nm激发时，见到Bi~(3+)和基质对Eu~(3+)具有某种能量传递，这种敏化作用主要是由于基质和Bi~(3+)的3P_1 → ~1S_0的400nm的宽带发射和Eu~(3+)的~7F_0 → ~5L_6的396nm的吸收相匹配产生~5L_6→~5D_0→~7F_2的跃迁。通过对激发光谱和荧光光谱的分析给出了Ca_2Y_(0.96)Eu_(0.04)SbO_6的能级图，从实验上可见，Eu~(3+)的发光强烈地依赖于钙钛矿的结构，当Eu~(3+)在空间群为Fm3m 的Ba_2YSbO_6和Sr_2YSbO_6中处于Oh点对称性时，主要是~5D_0 → ~7F_1的磁偶极跃迁。当Eu~(3+)在空间群为P_(21)的单斜钙钛矿中时，主要是~5D_0 → ~7F_2的电偶极跃迁。对于不同掺杂浓度M_2YSbO_6:R~(13+)(M = Ba、Ca; R' = Sm、Dy、Ho、Er、Tm)体系，通过激发和荧光光谱的研究，合理地确定了谱项。发现基质对Sm~(3+)、Dy~(3+)、Ho~(3+)具有敏化作用。对不同Bi~(3+)浓度的Ca_2YSbO_6:Bi~(3+)，由激发和荧光光谱可见Bi~(3+)具有二个激发带，第一激发带位于240nm处相当于~1S_0 → ~1P_1的跃迁，第二激发带位于315nm处相当于~1S_0 → ~3P_1的跃迁。有一个很强的兰紫色发射位于400nm处相当于~3P_1 →~1S_0的跃迁。

Simultaneous and Direct Determination of As, Bi, Pb, Sb, and Se and Co, Cr, Cu, Fe, and Mn in Milk by Electrothermal Atomic Absorption Spectrometry

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)