Revelando o processo de recriação do banho no leito no cenário da terapia intensiva: produto da sustentabilidade da enfermagem em incorporar o conhecimento êmico a sua práxis

Pós-graduação em Enfermagem (mestrado profissional) - FMB

Tecnologia para banho no leito de idosos e usuários acamados: uma contribuição para o cuidar humanizado

This study aimed to validate the technology at Bed Bath System, in view of bedridden elderly and their caregivers, with a view to transforming the conventional paradigm regarding the practice of bodily hygiene held in bath chairs adapted in long-stay institutions for the elderly. This is an experimental study involving 51 (fifty one) elderly and 17 (seventeen) caregivers of three long-stay institutions for the elderly of the city of João Pessoa. For data collection, applied initially to cognitive assessment scale Mini Mental State Examination, with the aim of tracking the subject group of elderly cognitively able to participate in the study. In the second phase, to measure the percentage of agreement and disagreement about the attributes of the subjects of the shower chair and adapted the system for bed bath, used a questionnaire with closed questions, Likert scale model of four (4) points, with a good reliability index (0.728), estimated by alpha conbrach, evidenced by the Wilcoxon test a significant difference (P<0.05) between the responses of seniors and caregivers about the attributes involving technology system in bath bed and bath chair adapted, confirming the perspective of the subjects that the two systems differ significantly. However, the system bed bath got greater degree of agreement for their use, characterizing this system is a technology that makes the differential bed bath pleasurable action, quality and humanized

Compreendendo a lacuna entre a prática e a evolução técnico-científica do banho no leito

Trata-se de estudo qualitativo, realizado com pacientes acamados, visando compreender a experiência da pessoa dependente da enfermagem para o banho no leito e desenvolver um modelo teórico representativo dessa experiência. Utilizou-se como referencial teórico o Interacionismo Simbólico e, como referencial metodológico, a Grounded Theory. Dos resultados emergiu o fenômeno - aprendendo a avaliar a vida e a enfermagem, ao tornar-se dependente de seus cuidados para o banho no leito. Isso possibilitou identificar a categoria central - propondo um modelo assistencial de enfermagem para o banho no leito, na perspectiva do processo avaliativo do paciente, que contrapõe a evolução técnico-científica relativa ao procedimento.

Banho no leito convencional e descartável: estudo microbiológico e de custo

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

A comunicação não verbal da equipe de enfermagem contribuindo para o cuidado do idoso em internação hospitalar

Pós-graduação em Enfermagem (mestrado profissional) - FMB

The Limits of Rational Choice: New Institutionalism in the Test Bed of Central Banking Politics in Australia

This paper tests the explanatory capacities of different versions of new institutionalism by examining the Australian case of a general transition in central banking practice and monetary politics: namely, the increased emphasis on low inflation and central bank independence. Standard versions of rational choice institutionalism largely dominate the literature on the politics of central banking, but this approach (here termed RC1) fails to account for Australian empirics. RC1 has a tendency to establish actor preferences exogenously to the analysis; actors' motives are also assumed a priori; actor's preferences are depicted in relatively static, ahistorical terms. And there is the tendency, even a methodological requirement, to assume relatively simple motives and preference sets among actors, in part because of the game theoretic nature of RC1 reasoning. It is possible to build a more accurate rational choice model by re-specifying and essentially updating the context, incentives and choice sets that have driven rational choice in this case. Enter RC2. However, this move subtly introduces methodological shifts and new theoretical challenges. By contrast, historical institutionalism uses an inductive methodology. Compared with deduction, it is arguably better able to deal with complexity and nuance. It also utilises a dynamic, historical approach, and specifies (dynamically) endogenous preference formation by interpretive actors. Historical institutionalism is also able to more easily incorporate a wider set of key explanatory variables and incorporate wider social aggregates. Hence, it is argued that historical institutionalism is the preferred explanatory theory and methodology in this case.

Impact of clinical practice guidelines on priorisation for intensive care beds allocation in high-risk acute coronary syndrome patients: does age play a role?

QUESTION UNDER STUDY: To assess which high-risk acute coronary syndrome (ACS) patient characteristics played a role in prioritising access to intensive care unit (ICU), and whether introducing clinical practice guidelines (CPG) explicitly stating ICU admission criteria altered this practice. PATIENTS AND METHODS: All consecutive patients with ACS admitted to our medical emergency centre over 3 months before and after CPG implementation were prospectively assessed. The impact of demographic and clinical characteristics (age, gender, cardiovascular risk factors, and clinical parameters upon admission) on ICU hospitalisation of high-risk patients (defined as retrosternal pain of prolonged duration with ECG changes and/or positive troponin blood level) was studied by logistic regression. RESULTS: Before and after CPG implementation, 328 and 364 patients, respectively, were assessed for suspicion of ACS. Before CPG implementation, 36 of the 81 high-risk patients (44.4%) were admitted to ICU. After CPG implementation, 35 of the 90 high-risk patients (38.9%) were admitted to ICU. Male patients were more frequently admitted to ICU before CPG implementation (OR=7.45, 95% CI 2.10-26.44), but not after (OR=0.73, 95% CI 0.20-2.66). Age played a significant role in both periods (OR=1.57, 95% CI 1.24-1.99), both young and advanced ages significantly reducing ICU admission, but to a lesser extent after CPG implementation. CONCLUSION: Prioritisation of access to ICU for high-risk ACS patients was age-dependent, but focused on the cardiovascular risk factor profile. CPG implementation explicitly stating ICU admission criteria decreased discrimination against women, but other factors are likely to play a role in bed allocation.

From evidence to clinical practice: effective implementation of therapeutic hypothermia to improve patient outcome after cardiac arrest.

OBJECTIVES: Therapeutic hypothermia has been recommended for postcardiac arrest coma due to ventricular fibrillation. However, no studies have evaluated whether therapeutic hypothermia could be effectively implemented in intensive care practice and whether it would improve the outcome of all comatose patients with cardiac arrest, including those with shock or with cardiac arrest due to nonventricular fibrillation rhythms. DESIGN: Retrospective study. SETTING: Fourteen-bed medical intensive care unit in a university hospital. PATIENTS: Patients were 109 comatose patients with out-of-hospital cardiac arrest due to ventricular fibrillation and nonventricular fibrillation rhythms (asystole/pulseless electrical activity). INTERVENTIONS: We analyzed 55 consecutive patients (June 2002 to December 2004) treated with therapeutic hypothermia (to a central target temperature of 33 degrees C, using external cooling). Fifty-four consecutive patients (June 1999 to May 2002) treated with standard resuscitation served as controls. Efficacy, safety, and outcome at hospital discharge were assessed. Good outcome was defined as Glasgow-Pittsburgh Cerebral Performance category 1 or 2. MEASUREMENTS AND MAIN RESULTS: In patients treated with therapeutic hypothermia, the median time to reach the target temperature was 5 hrs, with a progressive reduction over the 18 months of data collection. Therapeutic hypothermia had a major positive impact on the outcome of patients with cardiac arrest due to ventricular fibrillation (good outcome in 24 of 43 patients [55.8%] of the therapeutic hypothermia group vs. 11 of 43 patients [25.6%] of the standard resuscitation group, p = .004). The benefit of therapeutic hypothermia was also maintained in patients with shock (good outcome in five of 17 patients of the therapeutic hypothermia group vs. zero of 14 of the standard resuscitation group, p = .027). The outcome after cardiac arrest due to nonventricular fibrillation rhythms was poor and did not differ significantly between the two groups. Therapeutic hypothermia was of particular benefit in patients with short duration of cardiac arrest (<30 mins). CONCLUSIONS: Therapeutic hypothermia for the treatment of postcardiac arrest coma can be successfully implemented in intensive care practice with a major benefit on patient outcome, which appeared to be related to the type and the duration of initial cardiac arrest and seemed maintained in patients with shock.

Air blast freezing of fruit pulp models in commercial boxes: influence of preferential channels in the bed on freezing times estimating

The freezing times of fruit pulp models packed and conditioned in multi-layered boxes were evaluated under conditions similar to those employed commercially. Estimating the freezing time is a difficult practice due to the presence of significant voids in the boxes, whose influence may be analyzed by means of various methods. In this study, a procedure for estimating freezing time by using the models described in the literature was compared with experimental measurements by collecting time/temperature data. The following results show that the airflow through packages is a significant parameter for freezing time estimation. When the presence of preferential channels was considered, the predicted freezing time in the models could be 10% lower than the experimental values, depending on the method. The isotherms traced as a function of the location of the samples inside the boxes showed the displacement of the thermal center in relation to the geometric center of the product.

Flexural strength of acrylic resin repairs processed by different methods: water bath, microwave energy and chemical polymerization

Denture fractures are common in daily practice, causing inconvenience to the patient and to the dentists. Denture repairs should have adequate strength, dimensional stability and color match, and should be easily and quickly performed as well as relatively inexpensive. Objective: The aim of this study was to evaluate the flexural strength of acrylic resin repairs processed by different methods: warm water-bath, microwave energy, and chemical polymerization. Material and methods: Sixty rectangular specimens (31x10x2.5 mm) were made with warm water-bath acrylic resin (Lucitone 550) and grouped (15 specimens per group) according to the resin type used to make repair procedure: 1) specimens of warm water-bath resin (Lucitone 550) without repair (control group); 2) specimens of warm water-bath resin repaired with warm water-bath; 3) specimens of warm water-bath resin repaired with microwave resin (Acron MC); 4) specimens of warm water-bath resin repaired with autopolymerized acrylic resin (Simplex). Flexural strength was measured with the three-point bending in a universal testing machine (MTS 810 Material Test System) with load cell of 100 kgf under constant speed of 5 mm/min. Data were analyzed statistically by Kruskal-Wallis test (p<0.05). Results: The control group showed the best result (156.04 +/- 1.82 MPa). Significant differences were found among repaired specimens and the results were decreasing as follows: group 3 (43.02 +/- 2.25 MPa), group 2 (36.21 +/- 1.20 MPa) and group 4 (6.74 +/- 0.85 MPa). Conclusion: All repaired specimens demonstrated lower flexural strength than the control group. Repairs with autopolymerized acrylic resin showed the lowest flexural strength.

STRUCTURAL CONTROL OF A SMALL-SCALE TEST-BED SHAKER STRUCTURE USING A SPONGE-TYPE MAGNETO-RHEOLOGICAL FLUID DAMPER

Semi-active damping devices have been shown to be effective in mitigating unwanted vibrations in civil structures. These devices impart force indirectly through real-time alterations to structural properties. Simulating the complex behavior of these devices for laboratory-scale experiments is a major challenge. Commercial devices for seismic applications typically operate in the 2-10 kN range; this force is too high for small-scale testing applications where requirements typically range from 0-10 N. Several challenges must be overcome to produce damping forces at this level. In this study, a small-scale magneto-rheological (MR) damper utilizing a fluid absorbent metal foam matrix is developed and tested to accomplish this goal. This matrix allows magneto-rheological (MR) fluid to be extracted upon magnetic excitation in order to produce MR-fluid shear stresses and viscosity effects between an electromagnetic piston, the foam, and the damper housing. Dampers for uniaxial seismic excitation are traditionally positioned in the horizontal orientation allowing MR-fluid to gather in the lower part of the damper housing when partially filled. Thus, the absorbent matrix is placed in the bottom of the housing relieving the need to fill the entire device with MR-fluid, a practice that requires seals that add significant unwanted friction to the desired low-force device. The damper, once constructed, can be used in feedback control applications to reduce seismic vibrations and to test structural control algorithms and wireless command devices. To validate this device, a parametric study was performed utilizing force and acceleration measurements to characterize damper performance and controllability for this actuator. A discussion of the results is presented to demonstrate the attainment of the damper design objectives.

Fixed bed downdraft gasification of paper industry wastes

The two main wastes generated from secondary fibre paper mills are rejects (composed mainly of plastics and fibres) and de-inking sludge, both of which are evolved from the pulping process during paper manufacture. The current practice for the disposal of these wastes is either by land-spreading or land-filling. This work explores the gasification of blends of pre-conditioned rejects and de-inking sludge pellets with mixed wood chips in an Imbert type fixed bed downdraft gasifier with a maximum feeding capacity of 10kg/h. The producer gases evolved would generate combined heat and power (CHP) in an internal combustion engine. The results show that as much as 80wt.% of a brown paper mill's rejects (consisting of 20wt.% mixed plastics and 80wt.% paper fibres) could be successfully gasified in a blend with 20wt.% mixed wood chips. The producer gas composition was 16.24% H, 23.34% CO, 12.71% CO 5.21% CH and 42.49% N (v/v%) with a higher heating value of 7.3MJ/Nm. After the removal of tar and water condensate the producer gas was of sufficient calorific value and flow rate to power a 10kWe gas engine. Some blends using rejects from other mill types were not successful, and the limiting factor was usually the agglomeration of plastics present within the fuel.

Optimising plant bed performance through adaptive research with the Australian sweetpotato industry

A key driver of Australian sweetpotato productivity improvements and consumer demand has been industry adoption of disease-free planting material systems. On a farm isolated from main Australian sweetpotato areas, virus-free germplasm is annually multiplied, with subsequent 'pathogen-tested' (PT) sweetpotato roots shipped to commercial Australian sweetpotato growers. They in turn plant their PT roots into specially designated plant beds, commencing in late winter. From these beds, they cut sprouts as the basis for their commercial fields. Along with other intense agronomic practices, this system enables Australian producers to achieve worldRSQUOs highest commercial yields (per hectare) of premium sweetpotatoes. Their industry organisation, ASPG (Australian Sweetpotato Growers Inc.), has identified productivity of mother plant beds as a key driver of crop performance. Growers and scientists are currently collaborating to investigate issues such as catastrophic plant beds losses; optimisation of irrigation and nutrient addition; rapidity and uniformity of initial plant bed harvests; optimal plant bed harvest techniques; virus re-infection of plant beds; and practical longevity of plant beds. A survey of 50 sweetpotato growers in Queensland and New South Wales identified a substantial diversity in current plant bed systems, apparently influenced by growing district, scale of operation, time of planting, and machinery/labour availability. Growers identified key areas for plant bed research as: optimising the size and grading specifications of PT roots supplied for the plant beds; change in sprout density, vigour and performance through sequential cuttings of the plant bed; optimal height above ground level to cut sprouts to maximise commercial crop and plant bed performance; and use of structures and soil amendments in plant bed systems. Our ongoing multi-disciplinary research program integrates detailed agronomic experiments, grower adaptive learning sites, product quality and consumer research, to enhance industry capacity for inspired innovation and commercial, sustainable practice change.

Good laboratory practice: preventing introduction of bias at the bench

Background and Purpose—As a research community, we have failed to demonstrate that drugs which show substantial efficacy in animal models of cerebral ischemia can also improve outcome in human stroke. Summary of Review—Accumulating evidence suggests this may be due, at least in part, to problems in the design, conduct and reporting of animal experiments which create a systematic bias resulting in the overstatement of neuroprotective efficacy. Conclusions—Here, we set out a series of measures to reduce bias in the design, conduct and reporting of animal experiments modeling human stroke.