Application of forecasting structural cracks technique of 3D move in Chengdao buried hill

3DMove software, based on the three-dimension structural model of geologic interpretation, can forecast reservoir cracks from the point of view of formation of the structural geology, and analyze the characteristics of the cracks. 3DMove software dominates in forecasting cracks. We forecast the developments and directions of the cracks in Chengbei buried hill with the application of forecasting technique in 3DMove software, and obtain the chart about strain distributing on top in buried hill and the chart about relative density and orientation and the chart about the analysis of crack unsealing. In Chengbei 30 buried hill zone, north-west and north-east and approximately east-west cracks in Cenozoic are very rich and the main directions in every fault block are different. Forecasting results that are also verified by those of drilling approximately accord with the data from well logging, the case of which shows that the technique has the better ability in forecasting cracks, and takes more effects on exploration and exploitation of crack reservoir beds in ancient buried hill reservoirs.

In vitro study of the efficacy of acrylic bone cement loaded with supplementary amounts of gentamicin: Effect on mechanical properties, antibiotic release, and biofilm formation

Background: Infection remains a severe complication following a total hip replacement. If infection is suspected when revision surgery is being performed, additional gentamicin is often added to the cement on an ad hoc basis in an attempt to reduce the risk of recurrent infection.

Methods and results: In this in vitro study, we determined the effect of incorporating additional gentamicin on the mechanical properties of cement. We also determined the degree of gentamicin release from cement, and also the extent to which biofilms of clinical Staphylococcus spp. isolates form on cement in vitro. When gentamicin was added to unloaded cement (1–4 g), there was a significant reduction in the mechanical performance of the loaded cements compared to unloaded cement. A significant increase in gentamicin release from the cement over 72 h was apparent, with the amount of gentamicin released increasing significantly with each additional 1 g of gentamicin added. When overt infection was modeled, the incorporation of additional gentamicin did result in an initial reduction in bacterial colonization, but this beneficial effect was no longer apparent by 72 h, with the clinical strains forming biofilms on the cements despite the release of high levels of gentamicin.

Interpretation: Our findings indicate that the addition of large amounts of gentamicin to cement is unlikely to eradicate bacteria present as a result of an overt infection of an existing implant, and could result in failure of the prosthetic joint because of a reduction in mechanical performance of the bone cement.

Aproximaciones comparativas sobre los talleres metalúrgicos para la vitivinicultura moderna. Los pioneros Antonio Baldé, Gil Miret y Carlos Berri en Mendoza

Este trabajo propone una comparación entre las características principales de los dos talleres metalúrgicos pioneros en la producción de instrumentos y equipamiento para bodegas y destilerías industriales, en los comienzos de la vitivinicultura moderna en Mendoza. Los socios catalanes Antonio Baldé y Gil Miret comenzaron en 1885 y el italiano Carlos Berri en 1888. Se presenta un panorama general sobre el equipamiento de los talleres y los objetos que producían, las características de la mano de obra, la formación metalúrgica de los propietarios, la inserción de las dos firmas en la región, una referencia a otras actividades económicas desarrolladas por los empresarios y algunas cuestiones complementarias.

Aproximaciones comparativas sobre los talleres metalúrgicos para la vitivinicultura moderna. Los pioneros Antonio Baldé, Gil Miret y Carlos Berri en Mendoza

Este trabajo propone una comparación entre las características principales de los dos talleres metalúrgicos pioneros en la producción de instrumentos y equipamiento para bodegas y destilerías industriales, en los comienzos de la vitivinicultura moderna en Mendoza. Los socios catalanes Antonio Baldé y Gil Miret comenzaron en 1885 y el italiano Carlos Berri en 1888. Se presenta un panorama general sobre el equipamiento de los talleres y los objetos que producían, las características de la mano de obra, la formación metalúrgica de los propietarios, la inserción de las dos firmas en la región, una referencia a otras actividades económicas desarrolladas por los empresarios y algunas cuestiones complementarias.

Aproximaciones comparativas sobre los talleres metalúrgicos para la vitivinicultura moderna. Los pioneros Antonio Baldé, Gil Miret y Carlos Berri en Mendoza

Este trabajo propone una comparación entre las características principales de los dos talleres metalúrgicos pioneros en la producción de instrumentos y equipamiento para bodegas y destilerías industriales, en los comienzos de la vitivinicultura moderna en Mendoza. Los socios catalanes Antonio Baldé y Gil Miret comenzaron en 1885 y el italiano Carlos Berri en 1888. Se presenta un panorama general sobre el equipamiento de los talleres y los objetos que producían, las características de la mano de obra, la formación metalúrgica de los propietarios, la inserción de las dos firmas en la región, una referencia a otras actividades económicas desarrolladas por los empresarios y algunas cuestiones complementarias.

Identification of a thiamin-dependent synthase in Escherichia coli required for the formation of the 1-deoxy-d-xylulose 5-phosphate precursor to isoprenoids, thiamin, and pyridoxol

In Escherichia coli, 1-deoxy-d-xylulose (or its 5-phosphate, DXP) is the biosynthetic precursor to isopentenyl diphosphate [Broers, S. T. J. (1994) Dissertation (Eidgenössische Technische Hochschule, Zürich)], thiamin, and pyridoxol [Himmeldirk, K., Kennedy, I. A., Hill, R. E., Sayer, B. G. & Spenser, I. D. (1996) Chem. Commun. 1187–1188]. Here we show that an open reading frame at 9 min on the chromosomal map of E. coli encodes an enzyme (deoxyxylulose-5-phosphate synthase, DXP synthase) that catalyzes a thiamin diphosphate-dependent acyloin condensation reaction between C atoms 2 and 3 of pyruvate and glyceraldehyde 3-phosphate to yield DXP. We have cloned and overexpressed the gene (dxs), and the enzyme was purified 17-fold to a specific activity of 0.85 unit/mg of protein. The reaction catalyzed by DXP synthase yielded exclusively DXP, which was characterized by 1H and 31P NMR spectroscopy. Although DXP synthase of E. coli shows sequence similarity to both transketolases and the E1 subunit of pyruvate dehydrogenase, it is a member of a distinct protein family, and putative DXP synthase sequences appear to be widespread in bacteria and plant chloroplasts.

Early Pleistocene 40Ar/39Ar ages for Bapang Formation hominins, Central Jawa, Indonesia

The Sangiran dome is the primary stratigraphic window for the Plio-Pleistocene deposits of the Solo basin of Central Jawa. The dome has yielded nearly 80 Homo erectus fossils, around 50 of which have known findspots. With a hornblende 40Ar/39Ar plateau age of 1.66 ± 0.04 mega-annum (Ma) reportedly associated with two fossils [Swisher, C.C., III, Curtis, G. H., Jacob, T., Getty, A. G., Suprijo, A. & Widiasmoro (1994) Science 263, 1118–1121), the dome offers evidence that early Homo dispersed to East Asia during the earliest Pleistocene. Unfortunately, the hornblende pumice was sampled at Jokotingkir Hill, a central locality with complex lithostratigraphic deformation and dubious specimen provenance. To address the antiquity of Sangiran H. erectus more systematically, we investigate the sedimentary framework and hornblende 40Ar/39Ar age for volcanic deposits in the southeast quadrant of the dome. In this sector, Bapang (Kabuh) sediments have their largest exposure, least deformation, and most complete tephrostratigraphy. At five locations, we identify a sequence of sedimentary cycles in which H. erectus fossils are associated with epiclastic pumice. From sampled pumice, eight hornblende separates produced 40Ar/39Ar plateau ages ranging from 1.51 ± 0.08 Ma at the Bapang/Sangiran Formation contact, to 1.02 ± 0.06 Ma, at a point above the hominin-bearing sequence. The chronological sequence of 40Ar/39Ar ages follows stratigraphic order across the southeast quadrant. An intermediate level yielding four nearly complete crania has an age of about 1.25 Ma.

The vegetable system : or, a series of experiments, and observations tending to explain the internal structure, and the life of plants; their growth, and propagation; the number, proportion, and desposition of their constituent parts; with the true course of their juices; the formation of the embryo, the construction of the seed, and the encrease from that state to perfection /

Vol. 1 is dated 1759, vols. 2-3 1761, vol. 4 1762, and vol. 5 1763.

Investigation of spontaneous microemulsion formation in supercritical carbon dioxide using high-pressure NMR

NMR spectroscopy and relaxometry were used to investigate microemulsion formation in supercritical CO2. The droplets were stabilised by the salt of a perfluorinated polyether. Spontaneous microemulsion formation was observed over a period of 5 h in the absence of applied sheer. Time-resolved relaxation times of the surfactant tail showed a stepwise increase in mobility of the tail over this period. Conversely, the translational mobility of water confined within the droplet decreased over the same interval. This data is consistent with the gradual decrease in droplet size as time progressed. Indeed, NMR self-diffusion coefficients were used to show that droplets with a radius of approximately 5 nm were formed at equilibrium.