Prebiotics in foods

A wealth of information has been gathered over the past 15 years on prebiotics through experimental, animal and human studies, with the aim to understand the mechanism of actions and elucidate their beneficial health effects to the human host. Significant amount of evidence exists for their ability to increase the bioavailability of minerals and stimulate the immune system, although there is less clear evidence so far for their prophylactic or therapeutic role in gastrointestinal infections. Moreover, the effect of the food delivery vehicle on the efficacy of prebiotics is an area that has been hardly investigated. Besides their beneficial effects, prebiotics influence the textural and organoleptic properties of the food products, such as dairy and baked products. To do this however, they need to be stable during food processing, in particular under conditions of high temperature and low pH.

1987 census of manufactures.

Mode of access: Internet.

1992 census of manufactures.

Mode of access: Internet.

Seventy-five receipts for pastry, cakes, and sweetmeats /

Appendix: Miscellaneous receipts.

Control of final moisture content of food products baked in continuous tunnel ovens

There are well-known difficulties in making measurements of the moisture content of baked goods (such as bread, buns, biscuits, crackers and cake) during baking or at the oven exit; in this paper several sensing methods are discussed, but none of them are able to provide direct measurement with sufficient precision. An alternative is to use indirect inferential methods. Some of these methods involve dynamic modelling, with incorporation of thermal properties and using techniques familiar in computational fluid dynamics (CFD); a method of this class that has been used for the modelling of heat and mass transfer in one direction during baking is summarized, which may be extended to model transport of moisture within the product and also within the surrounding atmosphere. The concept of injecting heat during the baking process proportional to the calculated heat load on the oven has been implemented in a control scheme based on heat balance zone by zone through a continuous baking oven, taking advantage of the high latent heat of evaporation of water. Tests on biscuit production ovens are reported, with results that support a claim that the scheme gives more reproducible water distribution in the final product than conventional closed loop control of zone ambient temperatures, thus enabling water content to be held more closely within tolerance.

Flavour components of some processed. fish and fishery products of Japan

A study was conducted to examine the flavour components of some processed fish and fishery products of Japan by gas chromatography-mass spectrometry (GC-MS). In brief the method was to absorb the headspace volatiles at 70°C into the fused silica fibre of needle of the solid phase micro extraction fibre. The absorbed components were injected to the GC-MS. The components were identified by computer matching with library database as well as by authentic standard components. In general the number of flavour components were higher in the processed fish and fishery products (except frozen prawn) than that of the raw fish and prawn. The concentration (quantity) of the f1avour components in processed fish and fishery products was much higher than that of the raw fish and prawn. Smoked salmon and baked salmon possessed double number of flavour components than that of the raw salmon. Smoking resulted the highest number of flavour components followed by baking (grilling) and canning, surimi products (kamaboko and chikuwa), drying and lastly salting. However, freezing and frozen storage resulted loss of flavour components in prawn.

Mathematical modelling and optimisation of the formulation and manufacture of aggregate food products

In this PhD study, mathematical modelling and optimisation of granola production has been carried out. Granola is an aggregated food product used in breakfast cereals and cereal bars. It is a baked crispy food product typically incorporating oats, other cereals and nuts bound together with a binder, such as honey, water and oil, to form a structured unit aggregate. In this work, the design and operation of two parallel processes to produce aggregate granola products were incorporated: i) a high shear mixing granulation stage (in a designated granulator) followed by drying/toasting in an oven. ii) a continuous fluidised bed followed by drying/toasting in an oven. In addition, the particle breakage of granola during pneumatic conveying produced by both a high shear granulator (HSG) and fluidised bed granulator (FBG) process were examined. Products were pneumatically conveyed in a purpose built conveying rig designed to mimic product conveying and packaging. Three different conveying rig configurations were employed; a straight pipe, a rig consisting two 45° bends and one with 90° bend. It was observed that the least amount of breakage occurred in the straight pipe while the most breakage occurred at 90° bend pipe. Moreover, lower levels of breakage were observed in two 45° bend pipe than the 90° bend vi pipe configuration. In general, increasing the impact angle increases the degree of breakage. Additionally for the granules produced in the HSG, those produced at 300 rpm have the lowest breakage rates while the granules produced at 150 rpm have the highest breakage rates. This effect clearly the importance of shear history (during granule production) on breakage rates during subsequent processing. In terms of the FBG there was no single operating parameter that was deemed to have a significant effect on breakage during subsequent conveying. A population balance model was developed to analyse the particle breakage occurring during pneumatic conveying. The population balance equations that govern this breakage process are solved using discretization. The Markov chain method was used for the solution of PBEs for this process. This study found that increasing the air velocity (by increasing the air pressure to the rig), results in increased breakage among granola aggregates. Furthermore, the analysis carried out in this work provides that a greater degree of breakage of granola aggregates occur in line with an increase in bend angle.

Sensory profiles and consumer acceptability of a range of sugar-reduced products on the UK market

Current UK intake of non-milk extrinsic sugars (NMES) is above recommendations. Reducing the sugar content of processed high sugar foods through reformulation is one option for reducing consumption of NMES at a population level. However, reformulation can alter the sensory attributes of food products and influence consumer liking. This study evaluated consumer acceptance of a selection of products that are commercially-available in the UK; these included regular and sugar-reduced baked beans, strawberry jam, milk chocolate, cola and cranberry & raspberry juice. Sweeteners were present in the reformulated chocolate (maltitol), cola (aspartame and acesulfame-K) and juice (sucralose) samples. Healthy, non-smoking consumers (n = 116; 55 men, 61 women, age: 33 ± 9 years; BMI: 25.7 ± 4.6 kg/m2) rated the products for overall liking and on liking of appearance, flavor and texture using a nine-point hedonic scale. There were significant differences between standard and reduced sugar products in consumers’ overall liking and on liking of each modality (appearance, flavor and texture; all P < 0.0001). For overall liking, only the regular beans and cola were significantly more liked than their reformulated counterparts (P < 0.0001). Cluster analysis identified three consumer clusters that were representative of different patterns of consumer liking. For the largest cluster (cluster 3: 45%), there was a significant difference in mean liking scores across all products, except jam. Differences in liking were predominantly driven by sweet taste in 2 out of 3 clusters. The current research has demonstrated that a high proportion of consumers prefer conventional products over sugar-reduced products across a wide range of product types (45%) or across selected products (27%), when tasted unbranded, and so there is room for further optimization of commercial reduced sugar products that were evaluated in the current study. Future work should evaluate strategies to facilitate compliance to dietary recommendations on NMES and free sugars, such as the impact of sugar-reduced food exposure on their acceptance.

Possibilities for the healthy and nutritional improvement of confectionery and sweet products.

The overall objective of this PhD was to investigate the possibility to increase the nutritional value of confectionary products by the use of natural ingredients with healthy functions. The first part of the thesis focused on the possible substitution of the most characteristic component of confectionary products, i.e. refined sugar. Many natural whole sweetening alternatives are available, though not widely used; the use of molasses, the byproduct of sugar beet and cane production, still rich in healthy components as minerals and phytochemicals is hereby discussed; after having verified molasses effectiveness in oxidative stress counteraction on liver cultured cells, the higher antioxidant capacity of a sweet food prepared with molasses instead of refined sugar was confirmed. A second step of the project dealt with another main ingredient of various sweet products, namely wheat. Particularly, the exploitation of soft and durum wheat byproducts could be another sustainable strategy to improve the healthy value of confectionery. The isolation of oligosaccharides with bioactive functions form different fractions of the wheat milling stream was studied and the new ingredients were shown to have a high dietary fiber and antioxidants content. As valid alternative, product developers should consider the appealing and healthy addition of ancient grains flour to sweet baked goods. The possibility of substituting the modern whole durum wheat with the ancient Kamut® khorasan was considered, and the antioxidant and anti-inflammatory effects of these grains were evaluated and compared both in vitro and in vivo on rats. Finally, since high consumption of confectionery is a risk factor for obesity, a possible strategy for the counteraction of this disease was investigated. The ability of three bioactives in inhibiting adipocytes differentiation was investigated. In fact, theoretically, compounds able to influence adipogenesis could be used in the formulation of functional sweet products and contribute to prevent obesity.

The effect of consumer risk perceptions and information search on willingness to buy GM food products: A cross cultural analysis

This paper seeks to address the widespread call in the literature for the cross-cultural examination ( and validation) of accepted concepts within consumer behaviour, such as consumer risk perceptions and information search. The findings of the study provide support for a number of accepted relationships, whilst identifying distinct cross cultural differences in external information search and willingness to buy genetically modified (GM) food products by consumers.

Cooperation using a robotic ad hoc network made from Bluetooth, JXTA, OSGi and other commercial off the shelf (COTS) products

Abstract - Mobile devices in the near future will need to collaborate to fulfill their function. Collaboration will be done by communication. We use a real world example of robotic soccer to come up with the necessary structures required for robotic communication. A review of related work is done and it is found no examples come close to providing a RANET. The robotic ad hoc network (RANET) we suggest uses existing structures pulled from the areas of wireless networks, peer to peer and software life-cycle management. Gaps are found in the existing structures so we describe how to extend some structures to satisfy the design. The RANET design supports robot cooperation by exchanging messages, discovering needed skills that other robots on the network may possess and the transfer of these skills. The network is built on top of a Bluetooth wireless network and uses JXTA to communicate and transfer skills. OSGi bundles form the skills that can be transferred. To test the nal design a reference implementation is done. Deficiencies in some third party software is found, specifically JXTA and JamVM and GNU Classpath. Lastly we look at how to fix the deciencies by porting the JXTA C implementation to the target robotic platform and potentially eliminating the TCP/IP layer, using UDP instead of TCP or using an adaptive TCP/IP stack. We also propose a future areas of investigation; how to seed the configuration for the Personal area network (PAN) Bluetooth protocol extension so a Bluetooth TCP/IP link is more quickly formed and using the STP to allow multi-hop messaging and transfer of skills.

The S.T.A.B. Trial - Standardised Testing of Artificial Blood. A comparative study of various products that may be used as artificial blood for high fidelity simulation training in the critical care setting

Aim: In the current climate of medical education, there is an ever-increasing demand for and emphasis on simulation as both a teaching and training tool. The objective of our study was to compare the realism and practicality of a number of artificial blood products that could be used for high-fidelity simulation. Method: A literature and internet search was performed and 15 artificial blood products were identified from a variety of sources. One product was excluded due to its potential toxicity risks. Five observers, blinded to the products, performed two assessments on each product using an evaluation tool with 14 predefined criteria including color, consistency, clotting, and staining potential to manikin skin and clothing. Each criterion was rated using a five-point Likert scale. The products were left for 24 hours, both refrigerated and at room temperature, and then reassessed. Statistical analysis was performed to identify the most suitable products, and both inter- and intra-rater variability were examined. Results: Three products scored consistently well with all five assessors, with one product in particular scoring well in almost every criterion. This highest-rated product had a mean rating of 3.6 of 5.0 (95% posterior Interval 3.4-3.7). Inter-rater variability was minor with average ratings varying from 3.0 to 3.4 between the highest and lowest scorer. Intrarater variability was negligible with good agreement between first and second rating as per weighted kappa scores (K = 0.67). Conclusion: The most realistic and practical form of artificial blood identified was a commercial product called KD151 Flowing Blood Syrup. It was found to be not only realistic in appearance but practical in terms of storage and stain removal.