Latest progress of the RFQ cooler and buncher RFQ1L

The RFQ cooler and buncher RFQ1L is a key device of the SHANS (Spectrometer for Heavy Atoms and Nucleax Structure). The status of the machining and assembly of the central part is introduced, and the structure of the whole RFQ1L system and the preliminary plan for the testing are discussed also.

Experimental study of the high-voltage breakdown and simulations for the RFQ cooler and buncher RFQ1L

The RFQ cooler and buncher RFQ1L is one of the key parts of the being-built super-heavy nuclide research spectrometer. In order to understand the high-voltage breakdown phenomenon, the voltages between electrodes have been measured. In addition, more extensive simulations have been performed for better understanding and optimizing the RFQ1L work points.

Study of buncher efficiency in axial injection system of SFC

In order to reduce the influence of the stray electric field of the buncher in the axial injection system of SFC and to improve the injection efficiency of SFC, the existing buncher electrode is investigated and a new electrode is designed. The influences of the electric field to the beams for the both cases are simulated. The simulation results show that the bunching efficiency is improved from 55% to 74% with the new electrode. At the same time, the influence of the space charge is computed and according to the results, the location of the buncher is readjusted too.

高电压锯齿波聚束器的设计研制；Theoretical Calculation of Sawtooth Wave Buncher with High Voltage

近些年来,使用锯齿波直接形成的方法建造非谐振型聚束器在国内及国际均得到了广泛的应用。由于电子技术及机械加工工艺的飞速发展和更高功率电子管的出现,可以设计出更高指标的聚束器,进而可以有效提高束线的匹配效率及运行稳定度。对兰州重离子加速器源束线新的高电压锯齿波聚束器的研制进行了详细阐述,由于该聚束器具有目前国际同类型设备中最高的电压、频率以及相对苛刻的现场条件限制,故还对设计中所涉及的工程实施方案进行了有效补充和完善。

Avaliação técnica e econômica do corte de eucalipto com feller-buncher em diferentes condições operacionais

This study aimed to technically and economically evaluate the Feller-buncher in different conditions of harvest in eucalypt forests of second cut. The technical analysis included a study of time and movements by the method of continuous time, and operational performance was determined by volume in cubic meters of harvested wood. The economic analysis included the parameters of operational cost, harvest cost and energy consumption. The analysis of the data showed that the composition of main line harvesting and the arrangement of bundles of trees influenced operational performance. The average operational cost was US$ 86.26 per hour of actual work, which resulted in an average cost of forest harvesting of US$ 1.09 m(-3).

Productivity and costs of Beller-Buncher and forest processor in stands of eucalypts in first cut

The rationalization of forest harvesting and minimization costs is a constant search by the managers involved in this process, making them decide practices which are economically viable to optimize that operation. This study aimed to evaluate technically and economically the performance of feller-buncher and the forest processor in stands of eucalypts in first cut. The technique analysis included time and movements, productivity, efficiency operational and mechanical availability. The economic analysis included the parameters operational cost, harvesting cost and energy consumption. Aiming the optimization the cost of forest harvesting, the system composed by feller-buncher and processor forest presented itself as a technically and economically viable alternative to harvesting eucalypt in first cut or stands that do not have bifurcated trees.

Efeito do ângulo de derrubada no rendimento do Feller Buncher em floresta de Eucalyptus spp

Pós-graduação em Agronomia (Energia na Agricultura) - FCA

A new axial injection beam line of the SFC

A new axial beam injection system is designed and being constructed at the HIRFL. It consists of 2 GLASSER lenses, 1 dipole, 5 quadrupoles and 3 solenoids. There are two beam line branches for 14.5GHz ECR ion source and 18.5GHz super conducting ECR ion source. Both transverse and longitudinal beam optics are improved in contrast with the old one. The layout, beam optics calculation results and further improved design are given.

Beam match and preparation of SFC-CSR

In order to match the beam from the injection machine SFC of the HIRFL to the main ring of HIRFL-CSR, both beam emittance confining method and beam energy spread reducing method are proposed. The beam preparation principles and calculation results are presented

Progress on the RFQ1L and LPT

The SHANS spectrometer is under construction in the Institute of Modern Physics, Chinese Academy of Science. The RFQ cooler and buncher RFQ1L is one of the key devices in the SHANS. To perform direct mass measurement, the Lanzhou Penning Trap LPT is also under construction. In this symposium, the principle of the SHANS, the status of RFQ1L and LPT and some primary test results will be reported.

超重谱仪中冷却聚束器RFQ1L的模拟研究

对超重核和超重元素越来越多的探索和研究，以及对远离β稳定线奇异核的精细研究，都迫切地需要低能量、高品质的放射性束流。然而，由原子核反应产生的放射性束流普遍具有能量分散大、发射度大以及束流斑点大的缺点，因此，对放射性次级束流进行进一步的操控成为深入研究的必需条件。充有缓冲气体的RFQ冷却聚束器是适合这项任务的最佳选择。它不但可以高速度、高效率地提高束流的品质，而且适用于所有的核素。这项技术在上世纪末蓬勃地发展起来，现在已经成为世界各主要实验室进行放射性次级束流操控的必备实验装置。在中国科学院近代物理研究所，一台正在研制的专用于研究长寿命核素的超重核研究谱仪中就使用了RFQ冷却聚束器来冷却、约束和储存离子。论文首先简单介绍了近代物理研究所超重谱仪的情况和国际上RFQ冷却聚束器的研究情况，其次阐述了RFQ冷却聚束器相关原理，然后重点论述了用SIMION程序进行模拟的方法和对RFQ1L冷却段的模拟情况，并对模拟结果进行了讨论，接着，讨论了计算机无法模拟的一些因素，重点讨论了气体击穿问题，最后，对本论文的工作进行了总结，并对下一步工作进行了展望望。对RFQ1L冷却段的模拟和气体击穿问题是本论文的两个重点。冷却段的模拟是以为例进行的。通过改变缓冲气体压强、入射离子能量以及轴向电场梯度，得到了离子在RFQ冷却聚束器中不同的运动情况，得到了一些有意义的结论，有助于设备的设计和工作点的选择。另外，RFQ冷却聚束器的工作区域，正好位于缓冲气体最容易被击穿的范围，再加上射频的影响，因此气体击穿问题成为制约工作点选择的一个非常重要的因素。本文对此也作了详细的讨论