Comportamento mecânico de cerâmica produzida a partir de reciclagem de para-brisa de automóvel

É crescente o interesse nos materiais cerâmicos, devido as suas características como baixa massa específica e maior resistência a ambientes agressivos do que a maioria das ligas metálicas. Este trabalho tem o objetivo de produzir a partir de material descartado, cerâmicas em diferentes temperaturas de sinterização e avaliar a sua tensão de ruptura em ensaio de flexão de três pontos e a confiança desta medida. Devido ao custo de produzir pó de vidro, tanto pelo alto gasto de energia para fundir a matéria-prima como pelo consumo de minerais industriais, foi proposto utilizar vidro de para-brisa obsoleto reduzindo despesas operacionais e definindo um destino econômico e ambiental viável para estes rejeitos. A metodologia consistiu-se na obtenção do pó de vidro com características adequadas para ser conformado e sinterizado. Foram usadas duas composições e quatro tratamentos térmicos para obter oito materiais. Uma composição com apenas o pó oriundo da moagem de para-brisa e outra com este pó mais 4% de óxido de nióbio. A resistência à flexão dos produtos obtidos foi avaliada. Utilizou-se a estatística de Weibull para caracterizar estes resultados. Os resultados obtidos indicam que o material de composição pó de vidro e temperatura final de sinterização de 650C obteve a maior resistência mecânica entre os materiais sintetizados. A adição do óxido de nióbio provoca um decréscimo na resistência mecânica se comparada com o material sem a adição deste óxido. Entretanto, comparando as duas composições na mesma temperatura final de sinterização, a adição de óxido de nióbio provocou um aumento no módulo de Weibull, excetuando-se dois de oito materiais obtidos. As diferentes composições e temperaturas de sinterização afetaram as propriedades mecânicas dos materiais obtidos.

A ferrovia e o automóvel: ícones da modernidade na cidade de Bauru (1917-1939)

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Fadiga de molas helicoidais de suspensão de automóveis

Pós-graduação em Engenharia Mecânica - FEG

Avaliação da comunicação cartográfica de sistema de navegação e guia de rota em automóvel

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

O designer e a prática profissional na indústria automobilística no Brasil

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Fatores críticos de sucesso à adoção de práticas de green supply chain management: estudo de casos no setor de baterias automotivas

Pós-graduação em Engenharia de Produção - FEB

Desenvolvimento de um computador de bordo para veículo Baja-SAE

The objective of this paper is show the development of an Eletronic Control Unit (ECU) for Baja-SAE vehicles from its requirements to final implementation. An ECU for Baja-SAE vehicles is made of electric and electronic circuits (appropriated to the hostile situations of an off-road competition) able to make important measurements for the running or stand-by vehicle performance. For this development, some concepts were studied: embedded electronics concepts (mainly microcontrollers and data acquisition circuits) and sensoring. Both the studies were made considering the off-road environment. After these initial studies, the elaboration of the basics hardware and software (under simulations) has begun, and this elaboration objectives maximum performance and low implementation cost. After the theorical studies, basic definition of the hardware and software’s architectures and simulations, the printed circuit boards (PCB) were made, as exhaustive tests in these boards for debugging and verify if the boards work well. Once the system was tested in the university, it ran into a regional Southeast competition in 2010, that definitely proved the efficiency of the whole system

Dimensionamento de suspensões veiculares para isolamento de vibrações excitadas pela via

This work intends to perform the dimensioning of the Guaratinguetá’s Engineering College Baja SAE vehicle suspension system. To do so, concepts of suspension systems, human comfort limits to vibrations and automotive models for suspension vibration analyses are reviewed. On the development of this work descriptions of considerations specific for the vehicle object of this work are made as well as descriptions of the experiment made to determine the stiffness of the tire used. These concepts are applied through a computational routine that allows the dimensioning of springs and shock absorbers of both front and rear axles of a vehicle in a way to respect all the criteria showed during this work and visualize the system’s behavior when excited on different frequencies

Otimização do braço inferior da suspensão dianteira do veículo Baja utilizando o método dos elementos finitos

Mass reduction coupled with the mechanical performance in service has been the goal of many projects related to the transport area, considering the advantages that mass reduction can bring. However, make a simple material substitution without design a new geometry to corroborate for the best component performance, often makes the replacement unviable. In this study, it was investigated the advantages of replacing the prototype BAJA SAE front suspension lower arm of Equipe Piratas do Vale de BAJA SAE - Universidade Paulista, Campus Guaratinguetá, actually produced with steel, for a new component made of carbon fiber composite. The new geometry has been developed to provide the best possible performance for this component and your easy manufacturing. The study was done using the 3D modeling tools and computer simulations via finite element method. The first stage of this work consisted on calculation of the estimated maximum contact force tire / soil in a prototype landing after jump at one meter high, drop test in the laboratory with the current vehicle, current front suspension lower arm 3D modeling, finite element simulation and analysis of critical regions. After all current component analysis, a new geometry for the part in study was designed and simulated in order to reduce the component mass and provide a technological innovation using composite materials. With this work it was possible to obtain a theoretical component mass reduction of 25,15% maintaining the mechanical strength necessary for the appropriated component performance when incited

Análise cinemática e dinâmica para conversão de um VW saveiro em veículo elétrico

This work aims to kinematic and dynamic analysis of a VW Saveiro in order to estimate the power requested to the engine with the imposed movement conditions. Thus, the study will be the basis to the specification of the electric engine, on the conversion of the internal combustion vehicle into electric one. First of all, a literature review was done in order to understand the state of the art for this issue and come up with the technical features of the vehicle in question. The next step is the identification and calculation of all forces acting on the prototype in motion, from 0 to 120 km/h, in intervals of 10 km/h, under the defined conditions of path and time. Then, were determined the values of the torque and rotation of the components from the transmission system, as well as the engine power, for each speed range. The results show the most influential forces on the resistence of the movement in each speed range, and the behavior of the torque curve is verified. Finally, it was also analyzed the implementation of pinwheels on the frontal area of the vehicle, in order to convert wind energy into electrical energy to supply the lighting subsystem of the vehicle and the proposal was validated. Limiting the maximum speed of the vehicle to 90 km/h, it was finally concluded that the power of the electric engine should be 40 HP

Análise dos efeitos das deformações estruturais sobre a transferência transversal de carga em um veículo do tipo fórmula SAE submetido a uma aceleração lateral constante

This paper studies the frame deformations on a formula SAE vehicle in steady-state cornering and its influence on the lateral load transfers and, consequently, on the tires normal loads due to the applied lateral load. For a vehicle with a perfect rigid frame, the vehicle mass, the position of the center of gravity and the suspensions are the only factors responsible for the load distribution between the tires. When the frame deformations are no longer negligible, the frame deformations affect the loaddistribution between the tires. The frame flexibility turns it able to behave as an additional set of springs to the suspension system, thus changing the behavior of the set. This paper describes howit happens and suggests ways to minimize this phenomenon

Prospecção de novos negócios numa indústria de autopeças: diagnóstico de falhas e sugestões de ferramentas para melhoria

The growth and expansion in auto parts market are directly related to the ability of a company to innovate and gain new customers, increasing its portfolio of customers and products. For this purpose the process of prospecting for new business has become a key process in companies seeking this goal, which requires teams and structures dedicated to it. Besides counting on available resources to carry out prospecting, it is necessary to properly manage the process as a whole, whose main result is a business proposal, which may lead to closer relations with the potential client and the activation of a new business. Process failures and difficulties to formulate a commercial proposal lead to documents produced without the quality needed that makes it harder to obtain new business. The objective of this study is to evaluate the process of new businesses quotation in the auto parts industry and indicate opportunities for improving this process. This goal is achieved by mapping the current process, from the diagnosis of problems and the indication of tools that can prevent or minimize the problems diagnosed. The information supporting this study were obtained by the bibliographical research, participant observation of the process, unstructured interviews with some of the involved people in the process and prospecting tools that can improve it. It results the mapping of new business quotation process, the points indicated as failures and difficulties in the process and the appointment of project management tools that can bring improvements to the new business proposals and pointing the moment for your application in the process

Procedimentos para análise de lucratividade de produtos no setor de autopeças metálicas

In a globalized world, organizations face an increasingly dynamic, innovative and competitive environment, so that this condition requires continuous adaptation to market developments. Intense competition requires organizations to further improve their performance, making productive efficiency a key factor for survival. A methodology that has added value to the product through a reconfiguration of the production method is the implementation of a management philosophy called Lean Six Sigma. The main objective of this work is, in the light of the Lean Six Sigma philosophy, intervene in a critical-collaborative way to develop procedures for analyzing the profitability of products in a company specializing in steel processing. To achieve this goal, were applied the method of action-research to intervene in a group of professionals for the study of the profitability of products in a auto parts industry. The interaction of practical and theoretical knowledge provided by the action-research allowed the business program was enhanced. The procedures proposed in this study were able to identify the current profitability of the product, the main causes of inefficiency and productive for solutions to reduce production inefficiencies, when the productive systems planned and actual production system were compared. The results indicate that current profitability of -3%, while the parameter provided during budget was 10%. Thus, it is concluded that the low profitability of the products may compromise the company's financial results and affect their competitiveness in the market. To address this problem, the Lean Six Sigma presents itself as a versatile and high applicability philosophy, providing relevant results for characterization and troubleshooting. It was also observed that the evidence presented in this paper can be adapted to other companies in the metal auto parts segment to identify and recover the profitability of products

Modelagem e simulação do mecanismo biela manivela e análise estrutural de biela automotiva

Nowadays, the automotive industry is working to optimize the design of engines, in order to reduce the fuel consumption with acceptable efficiency ratio. This undergraduate thesis is aimed at perform a kinematic/dynamic analysis of a slider-crank mechanism that is part of a four stroke internal combustion engine, the same engine that was used in the analysis described by Montazersadhd and Fatemi (2007). Two algorithms were developed based on Kane’s method to calculate velocities and accelerations of the mechanism bodies, and provide the acting forces at connecting rod joints. A SimMechanics model was developed to simulate the engine, and monitoring the same parameters that were calculated with the algorithms. The results obtained with both approaches were satisfactory and showed good agreement with the values provided by Montazersadhd and Fatemi (2007). The obtained results showed that the axial component of the rod joint efforts was caused by the pressure exerted on the piston head,whereas the radial component was related with the action of inertia loads. Besides, this thesis presents a connecting rod assembly mesh that is going to be used for static and fatigue finite element analysis in the future

Estimativa das emissões de monóxido de carbono por veículos automotivos na cidade de Campinas/SP utilizando o modelo CAL3QHCR

Air pollution is an environmental issue worldwide and frequently cause negative effects on population health and ecosystems on cities. The relationship between climate and atmospheric pollution can be used as a surrogate to the intensity of air pollution. The present and quantity of some gases can be used as indicators to air quality: particulate matter (PM), sulfur dioxide (SO2), carbon monoxide (CO), ozone (O3), and nitrogen dioxide (NO2). Among those gases, CO has its major source within the cities, where automobiles are the main emitter. But measure pollutant concentration are challenging, sometimes because the lack of good equipments due to high costs and of the large variability of models that varies in precision, way of measure and distribution of sellers. Modeling are useful when there are an intend to evaluate air pollution, its sources and evaluate scenarios. This work aims to use CAL3QHCR model developed by the U.S Environmental Protection Agency (EPA) to generate predictive surfaces of CO concentration distribution on a site within Campinas city, located in São Paulo state, Brazil. CAL3QHCR model use data urban automobile circulation to generate spatial results for CO distribution. We observed that the pollution concentration was lower on our modeling than the concentrations measured by Companhia Ambiental do Estado de São Paulo (CETESB), the main environmental company on the São Paulo state. Also the correlation between average estimates of our model and the measure by CETESB was weak, indicating that the model used on this study need to be or better parameterized, or the scale we measured of CO emissions need to be rescaled. Although the model failed to correlate to CETESB data, maybe one that explore the estimated emissions distributed within the sites to understand spatial distributions of CO on the regions. Also, the generated information can also be used to other studies, and come to be useful to explain heat island