Effects Of High Pressure Homogenization On The Activity, Stability, Kinetics And Three-dimensional Conformation Of A Glucose Oxidase Produced By Aspergillus Niger.

High pressure homogenization (HPH) is a non-thermal method, which has been employed to change the activity and stability of biotechnologically relevant enzymes. This work investigated how HPH affects the structural and functional characteristics of a glucose oxidase (GO) from Aspergillus niger. The enzyme was homogenized at 75 and 150 MPa and the effects were evaluated with respect to the enzyme activity, stability, kinetic parameters and molecular structure. The enzyme showed a pH-dependent response to the HPH treatment, with reduction or maintenance of activity at pH 4.5-6.0 and a remarkable activity increase (30-300%) at pH 6.5 in all tested temperatures (15, 50 and 75°C). The enzyme thermal tolerance was reduced due to HPH treatment and the storage for 24 h at high temperatures (50 and 75°C) also caused a reduction of activity. Interestingly, at lower temperatures (15°C) the activity levels were slightly higher than that observed for native enzyme or at least maintained. These effects of HPH treatment on function and stability of GO were further investigated by spectroscopic methods. Both fluorescence and circular dichroism revealed conformational changes in the molecular structure of the enzyme that might be associated with the distinct functional and stability behavior of GO.

Adsorption of amyloglucosidase from Aspergillus niger NRRL 3122 using ion exchange resin

Amyloglucosidase enzyme was produced by Aspergillus niger NRRL 3122 from solid-state fermentation, using deffated rice bran as substrate. The effects of process parameters (pH, temperature) in the equilibrium partition coefficient for the system amyloglucosidase - resin DEAE-cellulose were investigated, aiming at obtaining the optimum conditions for a subsequent purification process. The highest partition coefficients were obtained using 0.025M Tris-HCl buffer, pH 8.0 and 25ºC. The conditions that supplied the highest partition coefficient were specified, the isotherm that better described the amyloglucosidase process of adsorption obtained. It was observed that the adsorption could be well described by Langmuir equation and the values of Qm and Kd estimated at 133.0 U mL-1 and 15.4 U mL-1, respectively. From the adjustment of the kinetic curves using the fourth-order Runge-Kutta algorithm, the adsorption (k1) and desorption (k2) constants were obtained through optimization by the least square procedure, and the values calculated were 2.4x10-3 mL U-1 min-1 for k1 and 0.037 min-1 for k2 .

Xylanases from Aspergillus niger, Aspergillus niveus and Aspergillus ochraceus produced under solid-state fermentation and their application in cellulose pulp bleaching

This study describes the production of xylanases from Aspergillus niveus, A. niger, and A. ochraceus under solid-state fermentation using agro-industrial residues as substrates. Enzyme production was improved using a mixture of wheat bran and yeast extract or peptone. When a mixture of corncob and wheat bran was used, xylanase production from A. niger and A. ochraceus increased by 18%. All cultures were incubated at 30 A degrees C at 70-80% relative humidity for 96 h. For biobleaching assays, 10 or 35 U of xylanase/g dry cellulose pulp were incubated at pH 5.5 for 1 or 2 h, at 55 A degrees C. The delignification efficiency was 20%, the brightness (percentage of ISO) increased two to three points and the viscosity was maintained confirming the absence of cellulolytic activity. These results indicated that the use of xylanases could help to reduce the amount of chlorine compounds used in cellulose pulp treatment.

Pectinase production by solid fermentation from Aspergillus niger by a new prescription experiment

The Ordos Plateau in China is covered with up to 300,000 ha of peashrub (Caragana) which is the dominant natural vegetation and ideal for fodder production. To exploit peashrub fodder, it is crucially important to optimize the culture conditions, especially culture substrate to produce pectinase complex. In this study, a new prescription process was developed. The process, based on a uniform experimental design, first optimizes the solid substrate and second, after incubation, applies two different temperature treatments (30 degrees C for the first 30 h and 23 degrees C for the second 42 h) in the fermentation process. A multivariate regression analysis is applied to a number of independent variables (water, wheat bran, rice dextrose, ammonium sulfate, and Tween 80) to develop a predictive model of pectinase activity. A second-degree polynomial model is developed which accounts for an excellent proportion of the explained variation (R-2 = 97.7%). Using unconstrained mathematical programming, an optimized substrate prescription for pectinase production is subsequently developed. The mathematical analysis revealed that the optimal formula for pectinase production from Aspergillus niger by solid fermentation under the conditions of natural aeration, natural substrate pH (about 6.5), and environmental humidity of 60% is rice dextrose 8%, wheat bran 24%, ammonium sulfate ((NH4)(2)SO4) 6%, and water 61%. Tween 80 was found to have a negative effect on the production of pectinase in solid substrate. With this substrate prescription, pectinase produced by solid fermentation of A. niger reached 36.3IU/(gDM). Goats fed on the pectinase complex obtain an incremental increase of 0.47 kg day(-1) during the initial 25 days of feeding, which is a very promising new feeding prospect for the local peashrub. It is concluded that the new formula may be very useful for the sustainable development of and and semiarid pastures such as those of the Ordos Plateau. (c) 2005 Elsevier Inc. All rights reserved.

Activity of Tri-N-Butyl Tin maleate in carpets against Staphylococcus aureus and Aspergillus niger, verified through two methodologies: Inhibition Halo (HZ) and Inhibition Surface (Print)

The aim of the present study was to verify the activity of the Tri-N-Butyl Tin maleate compound against Staphylococcus aureus and Aspergillus niger, after its industrial application in 40 samples of carpets of different materials (polypropylene, polyester, polyamide and wool). The qualitative assays were performed through two methodologies: Inhibition Halo (HZ) and Inhibition of Surface (Print). The carpet with the product inhibited 100% of bacterial (Staphylococcus aureus) and fungi (Aspergillus niger) growth, under the conditions of this study. The microbial inhibition was higher in upper portion of carpets. The methodologies employed appear to be adequate to test the bactericide and fungicide activities of the Tri-N-Butyl Tin maleate. The print methodology confirmed the results obtained by the inhibition zone assay. Further studies using the same methodologies are needed to confirm our results.

Aspergillus niger causing tracheobronchitis and invasive pulmonary aspergillosis in a lung transplant recipient: case report

A case of invasive aspergillosis caused by Aspergillus niger in a lung transplant recipient is described. The patient presented hyperglycemia starting postoperatively, with other complications such as cytomegalovirus infection. The associated predisposing factors and other implications are discussed. Aspergillus niger seems to be a fungal species of low virulence that requires the presence of a severely immunosuppressed host to cause invasive disease.

Estudo da partição de fitase produzida por Aspergillus niger var. phoenicis utilizando bioconversão extrativa em sistemas de duas fases aquosas PEG/citrato

Existem diversos métodos tradicionais que são utilizados para extratir biomoléculas produzidas por fermentação convencional. Um método alternativo é o sistema de duas fases aquosas, o qual foi desenvolvido para a extração de bioprodutos. A bioconversão extrativa trata-se de um sistema de duas fases aquosas que integra cultivo microbiológico à produção e recuperação do bioproduto. Fitases são fosfatases específicas que estão envolvidas na catálise do ácido fitico. O objetivo deste trabalho foi estudar a partição da fitase produzida por A. niger var. phoenicis por bioconversão extrativa utilizando PEG/citrato. Realizou-se um planejamento fatorial completo 25, estudando as seguintes variáveis: massa molar do PEG, concentração do PEG, concentração de citrato, pH e agitação, onde obteve-se como variável-resposta o coeficiente de partição em atividade (KATIV). Neste trabalho conseguiu-se um coeficiente de partição de 25,77 utilizando MPEG (8000 g/mol), CPEG, (26,0% m/m), CCIT (20,0% m/m), pH (6,0) e agitação (100 rpm). Através dos resultados obtivos, pode-se concluir que a fitase utilizada no presente estudo apresenta uma tendência de particionar para a fase superior do sistema (K>1). A técnica de fermentação extrativa utilizando SDFA PEG/citrato demonstrou ser promissora para extração de fitase produzida por A. niger var. phoenicis, podendo ser aplicada na composição de rações comerciais.

Atividade antibacteriana do Aspergillus niger van Tieghem, 1867; pesquisas em 14 amostras da National Collection of Type Cultures (M. R. C.)

1. Pesquisamos a atividade antibacteriana em 14 amostras de Aspergillus niger da National Collection of Type Cultures. 2. Em meio de Raulin e Mosseray, sete amostras apresentaram atividade total, nunca superior a 1:10, contra Staphylococcus aureus nº 553, sendo que as amostras 1.161 e 2.390 permaneceram ativas por mais de 40 dias. 3. A utilização do meio de Czapek-Dox com 5% de "corn-steep" não melhorou os resultados obtidos com o meio de Raulin e Mosseray. 4. No meio de levedo peptonado, todas as amostras apresentaram-se inativas.

Produção de celulases por Aspergillus niger por fermentação em estado sólido

O objetivo deste trabalho foi avaliar a produção enzimática de celulases pelo fungo filamentoso Aspergillus niger por fermentação em estado sólido de diferentes substratos. Foram avaliados os substratos sólidos bagaço de cana-de-açúcar, farelo de soja, farelo de trigo e misturas entre os substratos. Em substrato com 90% de bagaço e 10% de farelo de soja, avaliaram-se os efeitos do conteúdo de umidade (60, 70 e 80%, base úmida) e da suplementação com os meios indutores da atividade enzimática: sacarose, Mandels & Weber básico, Mandels & Weber modificado, com acréscimo de carboximetilcelulose, e Czapeck Dox. As maiores atividades de celulase total e endoglucanase, em farelo de trigo, foram obtidas após 72 horas de cultivo: 0,4 e 21,0 UI g-1, respectivamente. Observou-se expressivo aumento nas atividades enzimáticas na medida em que se aumentou a proporção de farelos no substrato, em comparação à fermentação com bagaço de cana apenas. O conteúdo de umidade de 50% foi insuficiente para conseguir completa hidratação do bagaço de cana, e a umidade ideal varia de acordo com o meio utilizado para suplementação e encontra-se entre 70 e 80%. O meio de Mandels & Weber modificado apresenta o melhor resultado como indutor da atividade enzimática.

Esterification of oleic acid catalayzed by an Aspergillus niger strain. Influence of water activity and alcohol concentration

Effects of water activity and 1-propanol concentration on synthesis of propyl oleate from oleic acid using Aspergillus niger cell-bound lipases in isooctane are described. A. niger produces lipases (EC 3.1.1.3) which partly bind to the mycelium during growth. Ester production was monitored for 72 hours at different 1-propanol concentrations and water activities. Aliquots were sequentially withdrawn and propyl esters were quantified using GC and methyl palmitate as an internal standard. In all assayed conditions A. niger cell-bound lipases catalysed propyl oleate synthesis, but at different degrees.

Remoção de corante por uso de Aspergillus niger AN400 em reator em bateladas sequenciais

A sequential batch reactor (4 L) inoculated with Aspergillus niger was operated in order to remove congo red dye (10 mg L-1). The feeding of the reactor was done to each 7 days. The glucose was added in the concentration of 1 g.L-1 (Stage I) and 0.5 g L-1 (Stage II). The Stage III occurred without glucose addition. The Stage I was great to process, because the system reached the greater dye removal (95%) as well as the kinetic parameters ware the best - K M (0.7 g L-1) and k1 (0.025 h-1).

Caracterización de la biomasa inactiva de Aspergillus niger O-5 como sorbente de Pb (II)

The inactive biomass of fungus Aspergillus niger O-5 obtained in Cuba was characterized as sorbent of Pb2+ by several structural analysis and others techniques. In addition, the biomass was studied for the separation / preconcentration of Pb2+ from aqueous solution. The maximum biosorption capacity was obtained for the contact time of 30 min and pH 5. The kinetic of sorption process occurred according to the model of Ho. The Freundlich or Langmuir models suitably described the experimental adsorption isotherms. The biomass can be used as sorbent for Pb2+ with a maximum capacity of 4.7 - 6.2 mg g-1. The pretreatment with NaOH solution improved its sorption capacity.