COMPARISON BETWEEN WOOD DRYING DEFECT SCORES: SPECIMEN TESTING X ANALYSIS OF KILN-DRIED BOARDS

It is important to develop drying technologies for Eucalyptus grandis lumber, which is one of the most planted species of this genus in Brazil and plays an important role as raw material for the wood industry. The general aim of this work was to assess the conventional kiln drying of juvenile wood of three clones of Eucalyptus grandis. The specific aims were to compare the behavior between: i) drying defects indicated by tests with wood specimens and conventional kiln-dried boards; and ii) physical properties and the drying quality. Five 11-year-old trees of each clone were felled, and only flatsawn boards of the first log were used. Basic density and total shrinkage were determined, and the drying test with wood specimens at 100 °C was carried out. Kiln drying of boards was performed, and initial and final moisture content, moisture gradient in thickness, drying stresses and drying defects were assessed. The defect scoring method was used to verify the behavior between the defects detected by specimen testing and the defects detected in kiln-dried boards. As main results, the drying schedule was too severe for the wood, resulting in a high level of boards with defects. The behavior between the defects in the drying test with specimens and the defects of kiln-dried boards was different, there was no correspondence, according to the defect scoring method.

Solar drying of jack fruit almonds

Dryers heated by solar energy have been constructed and used in drying whole and half jack fruit almonds. The samples were dried during the day in direct sun and in the conventional solar dryer prepared for this purpose. Another piece of equipment was built for reception and accumulation of sun energy in a body of water, which was used as a heat source for night drying. The drying with the sun energy was compared with artificial drying. The jack fruit almonds were dried whole, half, with pellicle and without it. The storage of solar energy in water was technically viable for use in night drying. The drying by combining solar dryers in the day and night periods were completed in approximately 35 hours, and were equivalent to artificial drying between 40ºC and 70ºC. Almond cut in half and the pellicle removed reduced the drying time.

Mathematical simulation parameters for drying of cassava starch pellets

Based on experimental tests, it was obtained the equations for drying, equilibrium moisture content, latent heat of vaporization of water contained in the product and the equation of specific heat of cassava starch pellets, essential parameters for realizing modeling and mathematical simulation of mechanical drying of cassava starch for a new technique proposed, consisting of preformed by pelleting and subsequent artificial drying of starch pellets. Drying tests were conducted in an experimental chamber by varying the air temperature, relative humidity, air velocity and product load. The specific heat of starch was determined by differential scanning calorimetry. The generated equations were validated through regression analysis, finding an appropriate correlation of the data, which indicates that by using these equations, can accurately model and simulate the drying process of cassava starch pellets.

Perda de matéria seca em grãos de milho submetidos a sistemas de secagem natural e artificial

Pós-graduação em Agronomia (Energia na Agricultura) - FCA

Perda de matéria seca em grãos de milho submetidos a sistemas de secagem natural e artificial.

The permanence of the corn grain in the field, after physiological maturity, is an important cause of crop losses, both in quantitative and qualitative aspect. By ceasing the supply of assimilated substances to grains, due to physiological maturity, the synthesis reactions are overcome by breathing, responsible for the maintenance of the living tissues of the grains, which occur at the expense of reserves accumulated during grain formation. In addition, there are losses from fungus and insects attack due to adverse weather conditions. Technological advances in recent decades, the develop of grain dryers with different capacities and efficiencies, has led to the early withdrawal of the product from the field, still damp, reducing spoilage. Moreover, the use of artificial drying systems can represent a significant cost to the producer. Thus, the present work aimed to study the effect of natural and artificial methods of drying on maize dry matter losses, for Botucatu, city of Sao Paulo state, Brazil. The cornfield production was conducted at the Experimental Farm “Lageado” and the experimental treatments were conducted in the Laboratory of Agricultural Products Processing, in the Department of Rural Engineering, where the drying systems were tested. The treatments were: shade (control), artificial with heated air, artificial unheated air and, drying attached to the plant. The following analyzes for quality monitoring were performed: weight test, thousand-grain weight test and, grain dry weight. The results showed significant loss in quality of drying beans attached to the plant, by assessing the dry matter loss and by the variation of the grain weight. The weight test showed that the worst performance was the artificial with heated air treatment. We used mathematical modeling techniques to describe the dry matter loss and adjusted the mathematical model to the experimental data analyzed. From the experimental data obtained during drying the grain attached to the plant, it was still possible to fit a regression model that estimates the loss of grain dry matter under the climate from Botucatu during the 2011/2012 harvest period.

Qualidade de sementes de crambe submetidas a métodos de secagem e períodos de armazenamento

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Efeito do sistema de secagem de crambe (Crambe abyssinica Hochst) na qualidade dos grãos e do óleo para produção de biodiesel

Pós-graduação em Agronomia (Energia na Agricultura) - FCA

Aplicação de biofungicidas no controle do fungo Aspergillus flavus L. em amendoim (Arachis hypogaea)

Pós-graduação em Engenharia e Ciência de Alimentos - IBILCE

Efeito imediato do método de secagem na qualidade de sementes de crambe

Crambe (Crambe abyssinica Hochst) seeds have high oil contents and its growth in Brazil aims to produce bio diesel. The crambe seeds production and commercialization began a few years ago. Research in technology production is essential and it is also important to use high quality seeds regardless of the technological level employed in the crop production. One of the factors that affect seed quality there is the drying process. Seed drying performed properly can reduce seed moisture content for storage without decrease in its qualitative characteristics. The aim of this study was to evaluate the immediate effect of natural and artificial drying methods (using heated and unheated air) on crambe seeds quality. The seeds were produced at Fazenda Lageado, Faculdade de Ciências Agronômicas, UNESP, Botucatu/SP, on April 2009. Seeds were submitted to the following drying methods: a) seed drying in the shade with natural ventilation; b) artificial drying method using heated air; c) artificial drying method using unheated air; d) drying on ceramic patio; e) drying on the mother plant. The seeds were evaluated immediately after drying. The following tests were performed: seed moisture content; standard germination; first count of germination; seedling emergence; emergence speed index and electrical conductivity. The experimental design was randomized blocks and the data obtained was subjected to analysis of variance, worth means being compared by Tukey test at 5% probability. There was no significant difference among drying treatments in relation to: germination rate, first count of germination, electrical conductivity, seedling emergence and emergence speed index. The highest percentage of abnormal seedlings was obtained on treatment with heated air drying. The drying on the mother plant method showed the lower percentage of dead seeds. The drying methods studied did not cause an immediate effect on crambe seeds quality, which showed high percentage of dormant seeds post-harvest.

Alteration of blue pigment in artificial iris in ocular prosthesis: Effect of paint, drying method and artificial aging

The artificial iris is the structure responsible for the dissimulation and aesthetics of ocular prosthesis. The objective of the present study was to evaluate the color stability of artificial iris of microwaveable polymerized ocular prosthesis, as a function of paint type, drying method and accelerated aging. A total of 40 discs of microwaveable polymerized acrylic resin were fabricated, and divided according to the blue paint type ( n = 5): hydrosoluble acrylic, nitrocellulose automotive, hydrosoluble gouache and oil paints. Paints where dried either at natural or at infrared light bulb method. Each specimen was constituted of one disc in colorless acrylic resin and another colored with a basic sclera pigment. Painting was performed in one surface of one of the discs. The specimens were submitted to an artificial aging chamber under ultraviolet light, during 1008 h. A reflective spectrophotometer was used to evaluate color changes. Data were evaluated by 3-way repeated-measures ANOVA and the Tukey HSD test (alpha = 0.05). All paints suffered color alteration. The oil paint presented the highest color resistance to artificial aging regardless of drying method. (C) 2010 British Contact Lens Association. Published by Elsevier Ltd. All rights reserved.

Effect of drying on the reproducibility of DIAGNOdent to detect caries-like lesions

The aim of this study was to verify the drying effect on the reproducibility of DIAGNOdent (Dd) devices to detect caries-like lesions. Three areas were created in each of the 34 bovine incisors: sound (S), demineralized (DE) and remineralized (RE). One examiner measured each area with two Dd devices (denominated X and Y), twice under humid, and twice under dry condition. Intra-rater agreement according each device and inter-device agreement were estimated by kappa statistics (k). Intra-rater agreement for device Y was substantial under humid (k DE=0.68 and k RE+S=0.68) and dry condition (k DE=0.64 and k RE+S=0.67). For device X, it was substantial under humid condition (k DE=0.57 and k RE+S=0.49), and it was almost perfect after air drying (k DE=1.0 and kRE+S=1.0). Inter-device agreement was slight (k =0.17) under humid condition, and it was substantial under dry condition (k =0.62). As reproducibility increased under dry condition, drying is advised to detect caries-like lesions on free smooth surfaces when different devices are used.

Electrochemical impedance spectroscopy investigation of the electrochemical behaviour of copper coated with artificial patina layers and submitted to wet and dry cycles

Due to rain events historical monuments exposed to the atmosphere are frequently submitted to wet and dry cycles. During drying periods wetness is maintained in some confined regions and the corrosion product layer, generally denominated patinas, builds up and gets thicker. The aim of this study is to use electrochemical impedance spectroscopy (EIS) to investigate the electrochemical behaviour of pure copper coated with two artificial patina layers and submitted either to continuous or to intermittent immersion tests, this latter aiming to simulate wet and dry cycles. The experiments were performed in 0.1 mol dm(-3) NaCl solution and in artificial rainwater containing the most significant pollutants of the city of Sao Paulo. The results of the continuous immersion tests in the NaCl solution have shown that the coated samples behave like a porous electrode with finite pore length. On the other hand, in the intermittent tests a porous electrode response with semi-infinite pore length can be developed. The results were interpreted based on the model of de Levie and a critical comparison with previous interpretations reported in the literature for similar systems is presented. (C) 2011 Elsevier Ltd. All rights reserved.

An artificial neural network model for prediction of quality characteristics of apples during convective dehydration

In this study, the effects of hot-air drying conditions on color, water holding capacity, and total phenolic content of dried apple were investigated using artificial neural network as an intelligent modeling system. After that, a genetic algorithm was used to optimize the drying conditions. Apples were dried at different temperatures (40, 60, and 80 °C) and at three air flow-rates (0.5, 1, and 1.5 m/s). Applying the leave-one-out cross validation methodology, simulated and experimental data were in good agreement presenting an error < 2.4 %. Quality index optimal values were found at 62.9 °C and 1.0 m/s using genetic algorithm.

Performance of different drying methods and their effects on the physiological quality of grain sorghum seeds (S. bicolor (L.) Moench)

This experiment viewed to evaluate the physiological quality of grain sorghum seeds as well as to determine the respective drying curve of each of three drying methods. The seeds harvested at 18.9%, 18.1%, and 18.2% of moisture content were submitted to the following drying methods : a) under natural conditions, b) an intermittent dryer in which the combustion of firewood was the source of caloric energy, and c) a stationary dryer in which the source of caloric energy was the burning of liquefied petroleum gas. The experimental design was a completely randomized one with 25 repetitions of one hundred seeds each. The water contents and weight of one thousand seeds were evaluated. Seeds physiological quality was evaluated by germination and vigor tests. Seed drying rates were of 0.11, 1.25, and 0.55 percent points per hour (pph -1) for the natural, intermittent and stationary drying methods, respectively. The intermittent treatment permits the highest loss of water in the shortest period of time, and germination and vigor remaining unchanged.

Influence of artificial accelerated ageing on the colour stability of paints used for ocular prosthesis iris painting

Objectives: To evaluate the colour stability of paints used for ocular prosthesis iris painting submitted for accelerated artificial ageing (AAA). Materials and methods: Forty specimens of acrylic resin for sclera (16 x 2 mm) were made and separated into eight groups (n = 10) according to the type of paint (gouache, GP; oil, OP; acrylic AP; and composite resin for characterisation, CR) and the colours used (blue/brown). After drying (72 h), a new layer of colourless acrylic resin was applied and the initial colour readout was performed (Spectrophotometer PCB 6807). New colour readouts were performed after AAA, and Delta E was calculated. Results: Statistical analysis (two-way ANOVA-Bonferroni, p < 0.05) demonstrated that the brown colour showed lower Delta E means in comparison with the blue colour, with statistically significant difference for AP only. Blue colour showed no statistically significant difference with regard to the type of paint used. Brown AP showed lower Delta E than the other groups, with significant difference for OP and GP. GP showed greater alteration in Delta E for the brown colour, being statistically similar only to OP. Conclusions: Only the AP group for brown pigment shows clinically acceptable values for colour stability after AAA.