Armourstone revetments : will standard design criteria prevent failure? /

Bank stabilization structures are used to prevent the loss of valuable land within the urban environment and the decision for the type of structure used depends on the properties of the stream. In the urban areas of Southern Ontario there is a preference for the use of armourstone blocks as bank stabilization. The armourstone revetment is a free standing stone structure with large blocks of stone layered vertically and offset from one another. During fieldwork at Forty Mile Creek in Grimsby, Ontario armourstone failure was identified by the removal of two stones within one column from the wall. Since the footer stones were still in place, toe scour was eliminated as a cause of failure. Through theoretical, field, and experimental work the process of suction has been identified as a mode of failure for the armourstone wall and the process of suction works similarly to quarrying large blocks of rock off bedrock streambeds. The theory of lateral suction has previously not been taken into consideration for the design of these walls. The physical and hydraulic evidence found in the field and studied during experimental work indicate that the armourstone wall is vulnerable to the process of suction. The forces exerted by the flow and the resistance of the block determine the stability of the armourstone block within the wall. The design of the armourstone wall, high surface velocities, and short pulses of faster flowing water within the profile could contribute to armourstone failure by providing the forces needed for suction to occur, therefore adjustments to the design of the wall should be made in order to limit the effect.

Integrated coastal geoengineering approach for maritime environments

This dissertation introduces several methodological approaches which integrate a proposed coastal management model in an interdisciplinary perspective. The research presented herein is displayed as a set of publications comprising different thematic outlooks. The thesis develops an integrated coastal geoengineering approach which is intrinsically linked to the studied maritime environments. From sandy coasts and marine works to rocky platforms and sea cliffs, this study includes field work between Caminha – Figueira da Foz (NW Portugal) and Galicia (NW Spain). The research also involves an analysis and geological-geotechnical characterisation of natural rock (armourstone) and artificial units (concrete blocks) applied to coastal structures. The main goal is to contribute to the characterisation and re-evaluation of georesources and to determine armourstone suitability and availability from its source (quarry). It was also important to diagnose the geomaterials in situ concerning their degradation/deterioration level on the basis of the current status of the coastal protection works in order to facilitate more efficient monitoring and maintenance, with economic benefits. In the rocky coast approach the coastal blocks were studied along the platform, but also the geoforms were studied from a coastal morphodynamics point of view. A shoreline evolution analysis was developed for sandy coasts through Digital Shoreline Analysis System (DSAS) extension. In addition, the spatial and statistical analysis applied to sea cliffs allowed the establishment of susceptibility zones to erosion and hazardous areas. All of these studies have different purposes and results however, there is a common denominator – GIS mapping. Hence, apart from the studied coastal environment, there is an integrated system which includes a sequence of procedures and methodologies that persisted during the research period. This is a step forward in the study of different coastal environments by using almost the same methodologies. This will allow the characterisation, monitoring and assessment of coastal protection works, rocky coasts, and shore platforms. With such data, it is possible to propose or recommend strategies for coastal and shoreline management based on several justifications in terms of social, economic, and environmental questions, or even provide a GIS-based planning support system reinforced by geocartographic decisions. Overall the development of the applied cartography embraces six stages which will allow the production of detailed maps of the maritime environment: (1) high-resolution aerial imagery surveys; (2) visual inspection and systematic monitoring; (3) applied field datasheet; (4) in situ evaluation; (5) scanline surveying; and (6) GIS mapping. This thesis covers fundamental matters that were developed over the course of scientific publication and as a consequence they represent the results obtained and discussed. The subjects directly related to the thesis architecture are: (i) cartography applied to coastal dynamics (including an art historical analysis as a tool to comprehend the coastal evolution and the littoral zone); (ii) georesources assessment (the role of cartography in georesources zoning, assessment and armourstone durability); (iii) coastal geoengineering applications and monitoring (Espinho pilot site in NW Portugal as an experimental field); (iv) rocky coast and shore platform studies and characterisation; (v) sandy and mixed environment approaches; (vi) coastal geosciences GIS mapping and photogrammetric surveying (coastal geoengineering); and (vii) shoreline change mapping and coastal management strategies (the CartGalicia Project as an example – NW Spain). Finally, all of these thematic areas were crucial to generate the conceptual models proposed and to shape the future of integrated coastal coastal geoengineering management.

Inspections of previously monitored coastal structures /

Includes bibliographical references: (p. 54-55).

Periodic inspection of jetties at Manasquan Inlet, New Jersey : armor unit monitoring for period 1994-1998 /

Includes bibliographical references: (p. 60).