Architecture at RISD: An Exhibition of Work, Woods-Gerry Gallery, Providence, Rhode Island, February 5-21, 1999

Postcards advertising a show of student architecture work at Woods-Gerry.

The Great Woods, Bristol County, Massachusetts: A Design with Nature

A poster of the front cover for the publication prepared by the RISD Department of Landscape Architecture.

URANS calculations for smooth circular cylinder flow in a wide range of Reynolds Numbers: solution verification and validation

The flow around circular smooth fixed cylinder in a large range of Reynolds numbers is considered in this paper. In order to investigate this canonical case, we perform CFD calculations and apply verification & validation (V&V) procedures to draw conclusions regarding numerical error and, afterwards, assess the modeling errors and capabilities of this (U)RANS method to solve the problem. Eight Reynolds numbers between Re = 10 and Re 5 x 10(5) will be presented with, at least, four geometrically similar grids and five discretization in time for each case (when unsteady), together with strict control of iterative and round-off errors, allowing a consistent verification analysis with uncertainty estimation. Two-dimensional RANS, steady or unsteady, laminar or turbulent calculations are performed. The original 1994 k - omega SST turbulence model by Menter is used to model turbulence. The validation procedure is performed by comparing the numerical results with an extensive set of experimental results compiled from the literature. [DOI: 10.1115/1.4007571]

Fernando García Mercadal y el Movimiento Moderno

La tesis plantea el estudio de la figura de Fernando García Mercadal (1896- 1985) y su obra, en el contexto del proyecto moderno perteneciente a la racionalidad teórica colectiva de la segunda generación del Movimiento Moderno en Europa, y explora la vida y circunstancias de un arquitecto que aunque nacido en el XIX, trajo la modernidad a España. El Movimiento Moderno en España, se articula en las décadas de los años 20 y 30 a través del GATEPAC y un grupo de arquitectos racionalistas en Madrid que Carlos Flores denomina Generación del 1925. Fernando García Mercadal, primero de su promoción en 1921 y pensionado en Roma, pertenece a ambos y pronto se convierte junto con Josep Lluis Sert, en una de las figuras más relevantes del panorama moderno español. Único miembro fundador del GATEPAC que había nacido en el siglo XIX, publica habitualmente en la revista AC (1931-1937), y en la revista Arquitectura desde 1920. Organiza en la Residencia de Estudiantes, entre 1928 y 1932, un famoso ciclo de Conferencias que imparten Le Corbusier, Mendelsohn, Van Doesburg, Gropius y Giedion. También asiste a la reunión constituyente de los CIAM en La Sarraz en 1928, al CIAM II en Frankfurt en 1929 y al CIAM III en Bruselas en 1930. Fue profesor en la Escuela de Arquitectura de Madrid y Arquitecto Jefe de la Oficina de Urbanismo y de Parques y Jardines del Ayuntamiento de Madrid, cargo al que accede por oposición en 1932. Tras la guerra fue depurado e inhabilitado profesionalmente, hasta que en 1946 comienza a trabajar en el Departamento de Arquitectura del I.N.P. donde continúa hasta los años 70. En 1979 es nombrado Académico de número de la Real Academia de Bellas Artes de San Fernando y muere en Madrid en 1985. Estos son los datos conocidos y aunque en la tesis se aportan nuevos datos inéditos, es en las premisas para su interpretación donde este trabajo de investigación pone el acento. En la historiografía de nuestra arquitectura moderna, pervive una tendencia a suponer una desconexión entre la vanguardia arquitectónica en los años 20 y 30 y el movimiento moderno internacional. El manto de silencio que cayó sobre la generación anterior a la guerra, una vez terminada esta, contribuye a reforzar la idea, cuyo origen y causas exceden el ámbito de trabajo, aunque se tratarán tangencialmente por ser ineludible hacerlo. La tesis pone en cuestión ese planteamiento desde el convencimiento fundamentado en los datos y en la consulta de fuentes originales, que la arquitectura española anterior a la guerra, aun con las circunstancias particulares del país, estuvo en sintonía con la europea, siendo esta la hipótesis de partida de la investigación. Las aportaciones más significativas que, a mi entender, presenta la tesis doctoral, y tienen mayor originalidad, son las siguientes; 1.Puesta en valor de la arquitectura de FGM, antes y después de la guerra, abandonando la idea de su supuesta renuncia a las ideas modernas a partir de los 30; 2. Puesta en valor, con aportación de datos concretos, de la Intensa relación mantenida por FGM y otros arquitectos españoles del Movimiento Moderno con los arquitectos de igual tendencia en el resto de Europa, a través de contactos recíprocos y continuos; 3. Estudio de la obra de FGM en el marco del Movimiento Moderno como una nueva arquitectura basada no tanto en la epidermis, como en una forma de hacer y encarar los problemas donde el proceso es tan importante como el resultado; con el Urbanismo como una nueva ciencia, y con el desarrollo de nuevos programas funcionales acordes a las necesidades de la sociedad contemporánea como el Rincón de Goya y el Hospital de Zaragoza. Se manejan tres métodos de trabajo. Los dos primeros aportan un nuevo enfoque al análisis crítico de FGM y su obra, situándole en el contexto internacional, además del español. El tercero, de carácter instrumental, permite el manejo y sistematización de la documentación. El primer método, consiste en aplicar el criterio generacional de Pevsner o Giedion entre otros, al Movimiento Moderno en España, situando a Fernando García Mercadal como arquitecto de la segunda generación, para hacer un análisis crítico comparativo de su trayectoria con otros arquitectos europeos de la misma, que permita establecer semejanzas y diferencias. El segundo método, complementario al anterior, consiste en estudiar las relaciones internacionales de FGM con las figuras más próximas a él y sus posibles influencias. Por último, y en relación con la documentación de obras y proyectos, se manejan a su vez dos criterios. Para la obra completa, y debido a la inexistencia de originales del Legado García Mercadal, se utiliza con carácter general el material ya publicado, disperso en libros y revistas. En el caso de las cinco obras seleccionadas, se completa con búsqueda en archivos, toma de datos in situ actualizados cuando es posible, y una recopilación de su repercusión en prensa escrita de su momento. ABSTRACT This research study focuses on Fernando Garcia Mercadal (1896-1985) and his work in the context of the Modern project as part of the collective theoretical rationality of the second generation of European Modern architecture. It explores the life and circumstances of the architect, who even though born in 19th century introduced Modern architecture in Spain. Modern architecture (Modern Movement) in Spain covered two decades between 20's and 30's through GATEPAC and a group of rationalists in Madrid that Carlos Flores named “generation of '25”. Fernando Garcia Mercadal, top of his class in 1921 and granted with the scholarship in Rome, belonged to both groups and early in his career he became, along with Josep Lluis Sert, one of the most relevant figures of Modern Architecture in Spain. He was the only member of GATEPAC who was born in 19th century. He frequently published on the magazine “AC” (1931-1937) and on “Arquitecture” magazine since 1920. He organized a series of famous lectures at “Residencia de Estudiantes” (Madrid) between 1928 and 1932 in which Le Corbusier, Mendelsohn, Van Doesburg, Gropius or Giedion took part. He was a member of the constituent meeting of CIAM in La Sarraz in 1928, CIAM II in Frankfurt in 1929 and CIAM III in Brussels in 1930. Mercadal was a teacher at Escuela de Arquitectura de Madrid and the Chief of the Urban Planning, Parks and Gardens Office of the Council of Madrid. He earned his position by public examination in 1932. After the civil war he was disqualified professionally until 1946, when he started working at the Architecture Department at INP until 70's. In 1979 he was elected as an academic member of “Real Academia de Bellas Artes de San Fernando” and later died in 1985. These are the well-known facts and even though this research study provides unpublished facts, it focuses on the premises to interpret them. Throughout the historiographical discourse of Spanish Modern architecture there is a tendency to assume a disconnection between the Avant-garde architecture movements in 20's and 30's and International Modern architecture (Modern Movement). The generation preceding the war remained silent in regard to this issue and once the war was over, they contributed to support the disconnection. The origin and cause exceed the frame of this work, even though they are incidentally commented due to its importance. This research study questions the approach explained above, based on the facts and the original sources. Its first hypothesis states that Spanish architecture before the civil war was, under its own circumstances, in tune with European architecture. The most important and original contributions of this research study are the following under my point of view: 1. To highlight the architecture of FGM, before and after the war, leaving behind his reputed withdrawal of Modernity after 30's; 2. To highlight the intense relationship between FGM and other Modern Spanish architects and other European architects sharing the same ideas, providing detailed facts; 3. Study of FGM's work in the context of Modern architecture as a new architecture based on its know-how and the way problems are faced. The process is as important as the result, not so much based on the dermis; with urban planning as the new science and with the development of the new functional programs based on the needs of contemporary society as in Rincón de Goya or Hospital de Zaragoza. Three work methods are used. The first two add a new vision of the critical analysis related to FGM and his work, positioning him in the international context in addition to Spain. The third is used as an instrument to manage and systematize the documentation. The first method applies the generational criteria of Pevsner or Giedion (among others) to Modern architecture in Spain, positioning Fernando Garcia Mercadal as a second generation architect. A critical-comparative analysis of his career and contemporary European architects is made to establish similarities and differences. The second method is complementary to the previous one and studies the international relationships of FGM with other recognised architects that were close to him and their possible influences. At last, in relation to his works and projects, two methods are used. For the complete works, due to the lack of originals, published material found on magazines and books is used as the source. In the case of the five selected buildings, it is complemented with archive search, onsite data collection when possible and the impact on the press at that moment.

Defense Finance and Accounting Service : accounting systems strategic plan for the Department of Defense : target architecture.

Shipping list no.: 97-0197-P.

The ... report of the Residential Planning Project of the Department of Architecture, University of Illinois in cooperation with Bituminous Coal Research Inc., American Coke and Coal Chemicals Institute, Anthracite Institute.

Mode of access: Internet.

Hometown architecture : changes in Central Iowa towns and farms,1981.

This book is a product of a two year project, the extensive surveys CIRALG and the Division of Historic Preservation undertook to identify culturally significant structures in central Iowa. It discloses the aspirations, tastes, building abilities and needs of earlier Iowans.

Potential of twenty exotic germplasms to improve Brazilian maize architecture

Temperate and temperate x tropical germplasms were introduced into the maize breeding of the Department of Genetics (ESALQ-USP). Twenty populations designated as P-1 to P-20 and a check population were evaluated in a randomized complete block design with two replications at Piracicaba, SP, Brazil. Plots were 2.0 m long, spaced 1.0 m apart, with 10 plants per plot after thinning. The following traits were evaluated: PH, plant height; EH, ear height; TB, tassel branch number; KW, 100 kernels weight; EL, ear length; ED, ear diameter; KR, kernels per row, and RN, number of rows of kernels. The means of the exotic populations showed a variation in performance for all traits. The population means were greater than check means for KW, EL, and KR. Populations P-9, P-10, P-12, and P-13 showed low relative ear placement values (EH/PH index), indicating that these materials could contribute to lower ear placement in local populations. P-1 and P-9 showed a high potential to reduce TB. The phenotypic correlation coefficients among populations were positive for most combinations, except for RN with PH, EH, TB, and KW. Predictions of 19 composite means were obtained for all traits.

Continental margin architecture : the palynological signature of glacioeustasy /

Palynomorphs from two siliciclastic margins were examined to gain insights into continental margin architecture. Sea level change is thought to be one of the primary controls on continental margin architecture. Because Late Neogene glacioeustasy has been well studied marine sediments deposited during the Late Neogene were examined to test this concept. Cores from the outer shelf and upper slope were taken from the New Jersey margin in the western North Atlantic Ocean and from the Sunda Shelf margin in the South China Sea. Continental margin architecture is often described in a sequence stratigraphic context. One of the main goals of both coring projects was to test the theoretical sequence stratigraphic models developed by a research group at Exxon (e.g. Wilgus et al., 1988). Palynomorphs provide one of the few methods of inferring continental margin architecture in monotonous, siliciclastic marine sediments where calcareous sediments are rare (e.g. New Jersey margin). In this study theoretical models of the palynological signature expected in sediment packages deposited during the various increments of a glacioeustatic cycle were designed. These models were based on the modem palynomorph trends and taphonomic factors thought to control palynomorph distribution. Both terrestrial (pollen and spores) and marine (dinocysts) palynomorphs were examined. The palynological model was then compared with New Jersey margin and Sunda Shelf margin sediments. The predicted palynological trends provided a means of identifying a complete cycle of glacioeustatic change (Oxygen Isotope Stage 5e to present) in the uppermost 80 meters of sediment on the slope at the New Jersey margin. Sediment availability, not sea meters of sediment on the slope at the New Jersey margin. Sediment availability, not sea level change, is thought to be the major factor controlling margin architecture during the late Pleistocene here at the upper slope. This is likely a function of the glacial scouring of the continents which significantly increases sediment availability during glacial stages. The subaerially exposed continental shelf during the lowstand periods would have been subject to significant amounts of erosion fi:om the proglacial rivers flowing fi-om the southern regions of the ice-sheet. The slope site is non-depositional today and was also non-depositional during the last full interglacial period. The palynomorph data obtained fi-om the South China Sea indicate that the major difference between the New Jersey Margin sites and the Sunda Shelf margin sites is the variation in sediment supply and the rate of sediment accumulation. There was significantly less variation in sediment supply between glacial and interglacial periods and less overall sediment accumulation at the Sunda Shelf margin. The data presented here indicate that under certain conditions the theoretical palynological models allow the identification of individual sequence stratigraphic units and therefore, allow inferences regarding continental margin architecture. The major condition required in this approach is that a complete and reliable database of the contemporaneous palynomorphs be available.

Spin labile conducting metallopolymers : a new architecture for hybrid multifunctional materials

The synthesis of 3-ethynylthienyl- (2.07), 3-ethynylterthienyl- (2.19) substituted qsal [qsalH = N-(8-quinolyl)salicylaldimine] and 3,3' -diethynyl-2,2' -bithienyl bridging bisqsal (5.06) ligands are described along with the preparation and characterization of eight cationic iron(III) complexes containing these ligands with a selection of counteranions [(2.07) with: SCN- (2.08), PF6- (2.09), and CI04- (2.10); (2.19) with PF6 - (2.20); (5.06) with: cr (5.07), SeN- (5.08), PF6- (5.09), and CI04- (5.10)]. Spin-crossover is observed in the solid state for (2.08) - (2.10) and (5.07) - (5.10), including a ve ry rare S = 5/2 to 3/2 spin-crossover in complex (2.09). The unusal reduction of complex (2.10) produces a high-spin iron(I1) complex (2.12). Six iron(II) complexes that are derived from thienyl analogues of bispicen [bispicen = bis(2-pyridylmethyl)-diamine] [2,5-thienyl substituents = H- (3.11), Phenyl- (3.12), 2- thienyl (3.13) or N-phenyl-2-pyridinalimine ligands [2,5-phenyl substituents = diphenyl (3.23), di(2-thienyl) (3.24), 4-phenyl substituent = 3-thienyl (3.25)] are reported Complexes (3.11), (3.23) and (3.25) display thermal spin-crossover in the solid state and (3.12) remains high-spin at all temperatures. Complex (3.13) rearranges to form an iron(II) complex (3.14) with temperature dependent magnetic properties be s t described as a one-dimensional ferromagnetic chain, with interchain antiferromagnetic interactions and/or ZFS dominant at low temperatures. Magnetic succeptibility and Mossbauer data for complex (3.24) display a temperature dependent mixture of spin isomers. The preparation and characterization of two cobalt(II) complexes containing 3- ethynylthienyl- (4.04) and 3-ethynylterhienyl- (4.06) substituted bipyridine ligands [(4.05): [Co(dbsqh(4.04)]; (4.07): [Co(dbsq)2(4.06)]] [dbsq = 3,5-dbsq=3,5-di-tert-butylI ,2-semiquinonate] are reported. Complexes (4.05) and (4.07) exhibit thermal valence tautomerism in the solid state and in solution. Self assembly of complex (2.10) into polymeric spheres (6.11) afforded the first spincrossover, polydisperse, micro- to nanoscale material of its kind. . Complexes (2.20), (3.24) and (4.07) also form polymers through electrochemical synthesis to produce hybrid metaUopolymer films (6.12), (6.15) and (6.16), respectively. The films have been characterized by EDX, FT-IR and UV-Vis spectroscopy. Variable-temperature magnetic susceptibility measurements demonstrate that spin lability is operative in the polymers and conductivity measurements confirm the electron transport properties. Polymer (6.15) has a persistent oxidized state that shows a significant decrease in electrical resistance.

Enabling and Measuring Complexity in Evolving Designs using Generative Representations for Artificial Architecture

As the complexity of evolutionary design problems grow, so too must the quality of solutions scale to that complexity. In this research, we develop a genetic programming system with individuals encoded as tree-based generative representations to address scalability. This system is capable of multi-objective evaluation using a ranked sum scoring strategy. We examine Hornby's features and measures of modularity, reuse and hierarchy in evolutionary design problems. Experiments are carried out, using the system to generate three-dimensional forms, and analyses of feature characteristics such as modularity, reuse and hierarchy were performed. This work expands on that of Hornby's, by examining a new and more difficult problem domain. The results from these experiments show that individuals encoded with those three features performed best overall. It is also seen, that the measures of complexity conform to the results of Hornby. Moving forward with only this best performing encoding, the system was applied to the generation of three-dimensional external building architecture. One objective considered was passive solar performance, in which the system was challenged with generating forms that optimize exposure to the Sun. The results from these and other experiments satisfied the requirements. The system was shown to scale well to the architectural problems studied.

Indian Mathematics Related to Architecture and Other Areas With Special Reference to Kerala

Department of Mathematics, Cochin University of Science and Technology

An Error-Localization, Validation and Optimization Tool for Embedded Code Augmentation: an Architecture Oriented Approach

Embedded systems are usually designed for a single or a specified set of tasks. This specificity means the system design as well as its hardware/software development can be highly optimized. Embedded software must meet the requirements such as high reliability operation on resource-constrained platforms, real time constraints and rapid development. This necessitates the adoption of static machine codes analysis tools running on a host machine for the validation and optimization of embedded system codes, which can help meet all of these goals. This could significantly augment the software quality and is still a challenging field.Embedded systems are usually designed for a single or a specified set of tasks. This specificity means the system design as well as its hardware/software development can be highly optimized. Embedded software must meet the requirements such as high reliability operation on resource-constrained platforms, real time constraints and rapid development. This necessitates the adoption of static machine codes analysis tools running on a host machine for the validation and optimization of embedded system codes, which can help meet all of these goals. This could significantly augment the software quality and is still a challenging field.Embedded systems are usually designed for a single or a specified set of tasks. This specificity means the system design as well as its hardware/software development can be highly optimized. Embedded software must meet the requirements such as high reliability operation on resource-constrained platforms, real time constraints and rapid development. This necessitates the adoption of static machine codes analysis tools running on a host machine for the validation and optimization of embedded system codes, which can help meet all of these goals. This could significantly augment the software quality and is still a challenging field.Embedded systems are usually designed for a single or a specified set of tasks. This specificity means the system design as well as its hardware/software development can be highly optimized. Embedded software must meet the requirements such as high reliability operation on resource-constrained platforms, real time constraints and rapid development. This necessitates the adoption of static machine codes analysis tools running on a host machine for the validation and optimization of embedded system codes, which can help meet all of these goals. This could significantly augment the software quality and is still a challenging field.This dissertation contributes to an architecture oriented code validation, error localization and optimization technique assisting the embedded system designer in software debugging, to make it more effective at early detection of software bugs that are otherwise hard to detect, using the static analysis of machine codes. The focus of this work is to develop methods that automatically localize faults as well as optimize the code and thus improve the debugging process as well as quality of the code.Validation is done with the help of rules of inferences formulated for the target processor. The rules govern the occurrence of illegitimate/out of place instructions and code sequences for executing the computational and integrated peripheral functions. The stipulated rules are encoded in propositional logic formulae and their compliance is tested individually in all possible execution paths of the application programs. An incorrect sequence of machine code pattern is identified using slicing techniques on the control flow graph generated from the machine code.An algorithm to assist the compiler to eliminate the redundant bank switching codes and decide on optimum data allocation to banked memory resulting in minimum number of bank switching codes in embedded system software is proposed. A relation matrix and a state transition diagram formed for the active memory bank state transition corresponding to each bank selection instruction is used for the detection of redundant codes. Instances of code redundancy based on the stipulated rules for the target processor are identified.This validation and optimization tool can be integrated to the system development environment. It is a novel approach independent of compiler/assembler, applicable to a wide range of processors once appropriate rules are formulated. Program states are identified mainly with machine code pattern, which drastically reduces the state space creation contributing to an improved state-of-the-art model checking. Though the technique described is general, the implementation is architecture oriented, and hence the feasibility study is conducted on PIC16F87X microcontrollers. The proposed tool will be very useful in steering novices towards correct use of difficult microcontroller features in developing embedded systems.