Max Dupain and the photography of Australian architecture

This thesis considers Max Dupain (1911-1992) and his contribution to the development of architectural photography in Australia. Through his continuous and prolific output over six decades of professional photography Dupain greatly stimulated awareness of and interest in Australian architecture. Before Dupain began specialising in the field, little consistent professional architectural photography had been practised in Australia. He and some of his close associates subsequently developed architectural photography as both a specialised branch of photography and - perhaps more significantly - as a necessary adjunct to architectural practice. In achieving these dual accomplishments, Dupain and like-minded practitioners succeeded in elevating architectural photography to the status of a discipline in its own right. They also gave Australians generally a deeper understanding of the heritage represented by the nation's built environment. At the same time, some of the photographic images he created became firmly fixed in the public imagination as historical icons within the development of a distinctive Australian tradition in the visual arts. Within his chosen field Dupain was the dominant Australian figure of his time. He was instrumental in breaking the link with Pictorialism by bringing Modernist and Documentary perspectives to Australian architectural photography. He was an innovator in the earlier decades of his professional career, however, his photographic techniques and practice did not develop beyond that. By the end of the 1980s he had largely lost touch with the technology and techniques of contemporary practice. Dupain's reputation, which has continued growing since his death in 1992, therefore arises from reasons other than his photographic images alone. It reflects his accomplishment in raising his fellow citizens' awareness of a worthwhile home-grown artistic tradition.

American Palestine Exploration Society Photograph Collection, 1875

This file contains a finding aid for the American Palestine Exploration Society Photograph Collection. To access the collection, please contact the archivist (asorarch@bu.edu) at the American Schools of Oriental Research, located at Boston University.

Recuperación y difusión de los archivos fotográficos de la arquitectura moderna en el Ecuador para el desarrollo de un patrimonio visual

Los arquitectos de la época moderna en el Ecuador consideraron a la fotografía como un elemento importante para registrar y difundir sus obras. El presente trabajo se basa en esta importancia, centrándose en la documentación fotográfica de la arquitectura moderna ecuatoriana. Para la realización de esta tesis se partió de la contextualización del tema, dando a conocer cómo se desarrolló la fotografía y cómo ésta se ligó a la arquitectura en diferentes países de América y Europa. A continuación se realizó una investigación acerca de la fotografía de arquitectura moderna del país, de los diferentes archivos fotográficos, las publicaciones y los fotógrafos de la época en Cuenca, Guayaquil y Quito. Luego del proceso investigativo, se seleccionaron dos fotógrafos principales: RolfBlomberg y Christoph Hirtz. Se analizaron sus obras fotográficas, basándose en criterios de valor de la buena fotografía de arquitectura. Posteriormente, por medio de las imágenes se analizaron las modificaciones que han sufrido, hasta la actualidad, las obras arquitectónicas y su entorno. El trabajo permitió recopilar información que se encontraba dispersa. Para su difusión se creó una base de datos, que está a disposición como medio de consulta para futuras investigaciones. Esta base consta de toda la información recopilada de los fotógrafos ecuatorianos de arquitectura moderna que se pudo encontrar en los diferentes archivos.

Estudio de las formas de aplicación de la fotografía sobre los materiales pétreos para la arquitectura = Study of photography application methods over architectural stony materials

Desde que el Hombre era morador de las cavernas ha sido manifiesto su deseo innato por grabar y reproducir "instantáneas con las que perpetuarse o sobre las que mirarse ". La aparición y desarrollo de la fotografía como medio para poder captar y fijar "la imagen directa de la realidad circundante " pronto se convierte en un nuevo lenguaje estético y poético que permite al artista la interpretación y reflexión de lo observado. Se imprime a la imagen el carácter de la mirada del fotógrafo, estableciendo un diálogo conceptual con el juego de luces. La presente Tesis plantea la creación de una nueva piel de arquitectura mediante la impresión fotográfica sobre materiales pétreos. La búsqueda de la expresividad de los materiales como soporte de expresión artística implica un cambio de escala al trasladar la instantánea fotográfica a la arquitectura y la aplicación de un nuevo soporte al imprimir la fotografía sobre materiales arquitectónicos. Se justifica la elección del dispositivo láser CO2 como sistema de impresión fotográfica sobre los materiales pétreos arquitectónicos, como la técnica que permite la unión física de la imagen y el proyecto arquitectónico, generando un valor añadido a través del arte de la fotografía. Se justifica la elección de los materiales investigados, Silestone® Blanco Zeus y GRC® con TX Active® Aria, de forma que la investigación de esta nueva piel de arquitectura abarca tanto la envolvente del edificio como su volumen interior, permitiendo cerrar el círculo arquitectónico "in&out" y dota al proyecto arquitectónico de un valor añadido al introducir conceptos sostenibles de carácter estético y medioambiental. Se realiza una consulta a las empresas del sector arquitectónico relacionadas directamente con la producción y distribución de los materiales Silestone® y GRC®, así como a las empresas especializadas en sistemas de impresión fotográfica sobre materiales, acerca del estado del arte. Se recorre la Historia de la fotografía desde sus orígenes hasta el desarrollo de la era digital y se analiza su condición artística. Se recopilan los sistemas de impresión fotográfica que han evolucionado en paralelo con los dispositivos de captura de la instantánea fotográfica y se describe en profundidad el sistema de impresión fotográfica mediante dispositivo láser CO2. Se describen los procesos de fabricación, las características técnicas, cualidades y aplicaciones de los materiales pétreos arquitectónicos Silestone® Blanco Zeus y GRC® con TX Active® Aria. Se explica la técnica utilizada para la captación de la imagen fotográfica, su justificación artística y su proceso de impresión mediante dispositivo láser CO2 bajo diferentes parámetros sobre muestras de los materiales arquitectónicos investigados. Se comprueba la viabilidad de desarrollo de la nueva piel de arquitectura sobre Silestone® Blanco Zeus y GRC® con TX Active® Aria sometiendo a las piezas impresas bajo diferentes parámetros a tres ensayos de laboratorio. En cada uno de ellos se concreta el objetivo y procedimiento del ensayo, la enumeración de las muestras ensayadas y los parámetros bajo los que han sido impresas, el análisis de los resultados del ensayo y las conclusiones del ensayo. Ensayo de amplitud térmica. Se determina el grado de afectación de las imágenes impresas bajo la acción de contrastes térmicos. Series de muestras de Silestone® Blanco Zeus y GRC® con TX Active® Aria impresas con láser CO2 se someten a ciclos de contraste frío-calor de 12 horas de duración para una amplitud térmica total de 102°C. Se realiza una toma sistemática de fotografías microscópicas con lupa de aumento de cada pieza antes y después de los ciclos frío-calor y la observación de las transformaciones que experimentan los materiales bajo la acción del láser CO2. Ensayo de exposición a la acción de la radiación ultravioleta (UV). Se determina el grado de afectación de las imágenes impresas al activar la capacidad autolimpiante de partículas orgánicas. Una serie de muestras de GRC® con TX Active® Aria impresa con láser CO2 se someten a ciclos de exposición de radiación ultravioleta de 26 horas de duración. Se somete la serie a un procedimiento de activación del aditivo TX Active®. Se simula la contaminación orgánica mediante la aplicación controlada de Rodamina B, tinte orgánico, y se simula la radiación UV mediante el empleo de una bombilla de emisión de rayos ultravioleta. Se realiza una toma sistemática de fotografías macroscópicas de la serie de muestras ensayadas: antes de aplicación de la Rodamina B, momento 00:00h, momento 04:00h y momento 26:00h del ensayo. Se procede a la descarga y análisis del histograma de las fotografías como registro de la actividad fotocatalítica. Ensayo de la capacidad autodescontaminante del GRC® con TX Active® impreso con láser CO2. Se comprueba si la capacidad autodescontaminante del GRC® con TX Active® se ve alterada como consecuencia de la impresión de la imagen fotográfica impresa con láser CO2. Serie de muestras de GRC® con TX Active® Aria impresa con láser CO2 se someten a test de capacidad autodescontaminante: atmósfera controlada y contaminada con óxidos de nitrógeno en los que se coloca cada pieza ensayada bajo la acción de una lámpara de emisión de radiación ultravioleta (UV). Se registra la actividad fotocatalítica en base a la variación de concentración de óxido de nitrógeno. Se recopila el análisis e interpretación de los resultados de los ensayos de laboratorio y se elaboran las conclusiones generales de la investigación. Se sintetizan las futuras líneas de investigación que, a partir de las investigaciones realizadas y de sus conclusiones generales, podrían desarrollarse en el ámbito de la impresión fotográfica sobre materiales arquitectónicos. Se describe el rendimiento tecnológico y artístico generado por las investigaciones previas que han dado origen y desarrollo a la Tesis Doctoral. ABSTRACT Since ancient time, humanity has been driven by an innate wish to reproduce and engrave "snapshots that could help to perpetúate or to look at one self". Photography's birth and its development as a mean to capture and fix "the direct image of the surrounding reality" quickly becomes a new aesthetical and poetical language allowing the artist to interpret and think over what has been observed. The photographer's eye is imprinted onto the image, and so the conceptual dialogue between the artist and the light beams begins. The current thesis suggests the creation of a new architectural skin through photography imprinting over stony materials. The search for material's expressiveness as a medium of artistic expression involves a change of scale as it transfers photographic snapshot into architecture and the use of a new photographic printing support over architectural materials. CO2 laser is the chosen printing system for this technique as it allows the physical union of the image and the architectonic project, generating an added value through the art of photography. The researched materials selected were Silestone®, Blanco Zeus and GRC® with TX Active® Aria. This new architectural skin contains the building surrounding as well as its interior volume, closing the architectonic "in & out" circle and adding a value to the project by introducing aesthetical and environmental sustainable concepts. Architecture companies related to the production and distribution of materials like Silestone® and GRC®, as well as companies specialized in photography printing over materials were consulted to obtain a State of the Art. A thorough analysis of photography's History from its origins to the digital era development was made and its artistic condition was studied in this thesis. In this study the author also makes a compilation of several photographic printing systems that evolved together with photographic snapshot devices. The CO2 laser-based photographic printing system is also described in depth. Regarding stony materials of architecture like Silestone®, Blanco Zeus and GRC® with TX Active® Aria, the present study also describes their manufacture processes as well as technical features, quality and application. There is also an explanation about the technique to capture the photographic image, its artistic justification and its CO2 laser-based printing system over the researched materials under different parameters. We also tested the feasibility of this new architectural skin over Silestone® Blanco Zeus and GRC® with TX Active® Aria. The pieces were tested under different parameters in three laboratory trials. Each trial comprises of an explanation of its objective and its process, the samples were numbered and the printing parameters were specified. Finally, with the analysis of the results some conclusions were drawn. In the thermal amplitude trial we tried to determine how printed images were affected as a result of the action of thermal contrasts. Series of samples of Silestone® Blanco Zeus and GRC® with TX Active® Aria printed with CO2 laser were subjected to several 12h warm-cold cycles for thermal total amplitude of 102oc. Each sample was captured systematically with microscopic enhanced lenses before and after cold-warm cycles. The changes experienced by these materials under the effect of CO2 laser were observed and recorded. Trial regarding the Ultraviolet Radiation (UR) effect on images. We determined to which extent printed images were affected once the self-cleaning organic particles were activated. This time GRC® with TX Active® Aria samples printed with CO2 laser were exposed to a 26h UR cycle. The samples were subjected to the activation of TX Active® additive. Through the controlled application of Rodamine B and organic dye we were able to simulate the organic contamination process. UR was simulated using an ultraviolet beam emission bulb. A systematic capture of macroscopic pictures of the tested sample series was performed at different time points: before Rodamine B application, at moment 00:00h, moment 04:00h and moment 26:00h of the trial. Picture's histogram was downloaded and analyzed as a log of photocatalytic activity. Trial regarding the self-decontaminating ability of GRC® with TX Active® printed with CO2 laser. We tested if this self-decontaminating ability is altered as a result of CO2 laser printed image. GRC® with TX Active® Aria samples printed with CO2 laser, were subject to self-decontaminating ability tests with controlled and nitrogen oxide contaminated atmosphere. Each piece was put under the action of an UR emission lamp. Photocatalytic activity was recorded according to the variation in nitrogen oxide concentration. The results of the trial and their interpretation as well as the general conclusions of the research are also compiled in the present study. Study conclusions enable to draw future research lines of potential applications of photographic printing over architecture materials. Previous research generated an artistic and technological outcome that led to the development of this doctoral thesis.

Reality bites: Documentary photography and architectural realism = Fragmentos de realidad: Fotografía documental y realismo en arquitectura

En el día de hoy nos enfrentamos a una serie de desafíos económicos, geopolíticos y ambientales que apuntan hacia una transformación profunda del mundo tal y como lo conocemos. La arquitectura esta – siempre lo ha estado – imbricada en todos estos problemas. En nuestra actual condición de recursos limitados e injusticia global surge la necesidad de superar la dicotomía entre progreso y tradición, entre innovación y preservación – la urgencia de redefinir incluso cada uno de estos términos. Los tipos de crisis que encaramos ahora no se resolverán con mas tecnología y más crecimiento – se necesita también una profunda reevaluación de nuestros sistemas de valores e incluso de nuestra sensibilidad. En este contexto, la humilde contribución de esta tesis consiste en proponer la idea de un realismo en arquitectura, entendido como una actitud progresista y atenta a lo que ya existe, dispuesta a abrir los ojos al presente, a las condiciones y los problemas reales que nos rodean. Pensando en esta idea, resulta evidente que si bien el realismo carece de una definición clara en el campo de la arquitectura hoy, cuenta sin embargo con numerosos precedentes parciales, entre ellos algunos de los más notorios episodios de la historia de la arquitectura reciente. Al intentar confeccionar una lista provisional de arquitectos realistas en el último siglo, otro hecho se nos presenta: muchos, por no decir todos estos arquitectos, comparten una fijación por la fotografía, bien apropiándose del trabajo de fotógrafos contemporáneos, bien tomando sus propias imágenes como una forma de mirar fuera de sus estudios e incorporar la realidad del medio construido a sus proyectos. Parece entonces lógico pensar que la arquitectura, como disciplina visual, ha acudido a otra disciplina visual en búsqueda de su propia respuesta al problema del realismo – dentro de este campo la fotografía reverbera con la arquitectura especialmente, ya que ambas son consideradas simultáneamente como practicas utilitarias y como parte de las bellas artes. Parece entonces lógico el organizar la investigación como una serie de casos, con la esperanza de que la acumulación de diversas instancias en las que la arquitectura ha acudido a la fotografía en su búsqueda de un realismo arrojara luz sobre las ideas más generales a debate. Por tanto, cada uno de los episodios en este texto se examina en sus propios términos, si bien una serie de interconexiones emergen a medida que el estudio procede con un suave orden cronológico. Hacia el final del texto cuestiones más grandes recobran protagonismo, a medida que las repercusiones políticas de nuestro estudio se hacen más patentes y comenzamos a interrogar las implicaciones contemporáneas y el potencial futuro de nuestra discusión sobre el realismo. ABSTRACT Today we are faced with a series of economic, geopolitical and environmental challenges that outline a deep transformation of the world as we know it. Architecture is – it has always been – ingrained in all of these problems. In our current condition of limited resources and global inequalities there is a necessity to overcome the dichotomy between progress and tradition, between innovation and preservation – an urgency to even redefine these terms altogether. The types of crises that we are facing will not be solved with more technology and more growth – a deep reevaluation of our systems of values and our sensibilities are also needed. In this context, the humble contribution of this text is to put forward the idea of an architectural realism, understood as an attitude that is both progressive and attentive to what is already in place, willing to open its eyes to the present and accept the real conditions and problems around us. In thinking about this prospect, it immediately becomes apparent that even if realism lacks a clear definition in the field of architecture today, there are numerous partial precedents for it, among them some of the most notorious episodes in the recent history of architecture. In crafting a tentative list of realist architects in the last century, another realization takes place: many, not to say all of these architects, have had a fixation with photography, either appropriating the work of contemporary photographers or taking photographs themselves as a way to look out their windows and bring the reality of the built environment into their practices. It seems then logical to think that architecture, as a visual discipline, has looked to other visual disciplines in search for its own take on the problem of realism – within this field, photography specially resonates with architecture, since both are regarded simultaneously as utilitarian practices and belonging to the fine arts. The idea then becomes to organize the research as a series of cases, with the hope that the accumulation of diverse instances in which architecture has approached photography in its realist drive will shed some light on the larger ideas at stake. Therefore, each of the episodes in this text is examined on its own terms, with a series of interconnections slowly emerging as our survey proceeds with a soft chronologic order. Towards the end of the study, larger issues regain relevance as the political repercussions of our inquiry become more pressing and we start to question the contemporary implications and future potentials of our discussion on realism.

Design and Practice in Architectural Theory Education

Benefiting from design in theory learning is not common in architecture schools. The general practice is to design in studio and to theorise in lectures. In the undergraduate module History and Theory in Architecture II at Queen’s University Belfast, students attend interactive lectures, participate in reading group discussions, design TextObjects, and write essays. TextObjects contain textual, audio and/or graphic representations that highlight a single concept or a complex set of issues derived from readings. Students experiment with diverse media, such as filmmaking, photography, and graphic design, some of which they experience for the first time. Lectures and readings revolve around theories of architectural representation, media and communication, which are practiced through TextObjects. This is a new way to link theory and practice in architectural education. Through action research, this study analyses this innovative teaching method called TextObject, which brings design and practice into architectural theory education to stimulate students towards critical thinking. The pedagogical research of architectural theoretician Necdet Teymur (1992, 1996, 2002) underlies the study.

Stereocopic Photography Encounters the Staircase

The staircase is presented as the architectural component that most potently embodies thresholds, boundaries and passages due to its diagonal orientation and essence as an intermediary zone. Connections then are made between the kinesthetic requirements of traversing a staircase and viewing a stereoscopic photograph. From this foundation, the haptic essence of stereoscopic photography is proposed as uniquely qualified medium through which to view a staircase and therefore thresholds, boundaries, and passages within architecture. Analyses of stereoviews of staircases in the Palais de Justice in Brussels, the Library of Congress in Washington, and the Palais Garnier (Opéra) in Paris close the essay.

Lady Nugent and Tom Cringle on the veranda : early nineteenth century observations on a Caribbean architectural feature

This study of the veranda as seen through the eyes of Lady Maria Nugent and Michael Scott, alias Tom Cringle, clearly demonstrates the important role that the piazza, as it was then more commonly known, played in the life of early nineteenth century Caribbean colonial society. The popularity of the veranda throughout the region, in places influenced by different European as well as African cultures, and among all classes of people, suggests that the appeal of this typical feature was based on something more than architectural fashion. A place of relative comfort in hot weather, the veranda is also a space at the interface of indoors and outdoors which allows for a wide variety of uses, for solitary or small or large group activities, many of which were noted by Nugent and Scott. Quintessentially, the veranda is a place in which to relax and take pleasure, not least of which is the enjoyment of the prospect, be it a panoramic view, a peaceful garden or a lively street scene. Despite the great changes in the nature of society, in the Caribbean and in many other parts of the world, the veranda and related structures such as the balcony continue to play at least as important a role in daily life as they did two centuries ago. The veranda of today’s Californian or Australian bungalow, and the balcony of the apartment block in the residential area of the modern city are among the contemporary equivalents of the lower and upper piazzas of Lady Nugent’s and Tom Cringle’s day.

An innovative learning model for teaching architectural technology using building information modelling : a Queensland University of Technology perspective

In architecture courses, instilling a wider understanding of the industry specific representations practiced in the Building Industry is normally done under the auspices of Technology and Science subjects. Traditionally, building industry professionals communicated their design intentions using industry specific representations. Originally these mainly two dimensional representations such as plans, sections, elevations, schedules, etc. were produced manually, using a drawing board. Currently, this manual process has been digitised in the form of Computer Aided Design and Drafting (CADD) or ubiquitously simply CAD. While CAD has significant productivity and accuracy advantages over the earlier manual method, it still only produces industry specific representations of the design intent. Essentially, CAD is a digital version of the drawing board. The tool used for the production of these representations in industry is still mainly CAD. This is also the approach taken in most traditional university courses and mirrors the reality of the situation in the building industry. A successor to CAD, in the form of Building Information Modelling (BIM), is presently evolving in the Construction Industry. CAD is mostly a technical tool that conforms to existing industry practices. BIM on the other hand is revolutionary both as a technical tool and as an industry practice. Rather than producing representations of design intent, BIM produces an exact Virtual Prototype of any building that in an ideal situation is centrally stored and freely exchanged between the project team. Essentially, BIM builds any building twice: once in the virtual world, where any faults are resolved, and finally, in the real world. There is, however, no established model for learning through the use of this technology in Architecture courses. Queensland University of Technology (QUT), a tertiary institution that maintains close links with industry, recognises the importance of equipping their graduates with skills that are relevant to industry. BIM skills are currently in increasing demand throughout the construction industry through the evolution of construction industry practices. As such, during the second half of 2008, QUT 4th year architectural students were formally introduced for the first time to BIM, as both a technology and as an industry practice. This paper will outline the teaching team’s experiences and methodologies in offering a BIM unit (Architectural Technology and Science IV) at QUT for the first time and provide a description of the learning model. The paper will present the results of a survey on the learners’ perspectives of both BIM and their learning experiences as they learn about and through this technology.

Remediating vernacular creativity : photography and cultural citizenship in the Flickr photosharing network

Read through a focus on the remediation of personal photography in the Flickr photosharing website, in this essay I treat vernacular creativity as a field of cultural practice; one that that does not operate inside the institutions or cultural value systems of high culture or the commercial popular media, and yet draws on and is periodically appropriated by these other systems in dynamic and productive ways. Because of its porosity to commercial culture and art practice, this conceptual model of ‘vernacular creativity’ implies a historicised account of ‘ordinary’ or everyday creative practice that accounts for both continuity and change and avoids creating a nostalgic desire for the recuperation of an authentic folk culture. Moving beyond individual creative practice, the essay concludes by considering the unintended consequences of vernacular creativity practiced in online social networks: in particular, the idea of cultural citizenship.