998 resultados para Antica Roma, materiali, tecnologie, edilizia


Relevância:

100.00% 100.00%

Publicador:

Resumo:

Materiali e metodologie utilizzati nell'edilizia nell'antica Roma

Relevância:

100.00% 100.00%

Publicador:

Resumo:

New concepts on porosity appraisal in ancient and modern construction materials. The role of Fractal Geometry on porosity characterization and transport phenomena. This work studied the potential of Fractal Geometry to the characterization of porous materials. Besides the descriptive aspects of the pore size distribution, the fractal dimensions have led to the development of rational relations for the prediction of permeability coefficients to fluid and heat transfer. The research considered natural materials used in historical buildings (rock and earth) as well as currently employed materials as hydraulic cement and technologically advanced materials such as silicon carbide or YSZ ceramics. The experimental results of porosity derived from the techniques of mercury intrusion and from the image analysis. Data elaboration was carried out according to established procedures of Fractal Geometry. It was found that certain classes of materials are clearly fractal and respond to simple patterns such as Sierpinski and Menger models. In several cases, however, the fractal character is not recognised because the microstructure of the material is based on different phases at different dimensional scales, and in consequence the “fractal dimensions” calculated from porosimetric data do not come within the standard range (less than 3). Using different type and numbers of fractal units is possible, however, to obtain “virtual” microstructures that have the fraction of voids and pore size distribution equivalent with the experimental ones for almost any material. Thus it was possible to take the expressions for the permeability and the thermal conduction which does not require empirical “constants”, these expressions have also provided values that are generally in agreement with the experimental available data. More problematic has been the fractal discussion of the geometry of the rupture of the material subjected to mechanical stress both external and internal applied. The results achieved on these issues are qualitative and prone to future studies. Keywords: Materials, Microstructure, Porosity, Fractal Geometry, Permeability, Thermal conduction, Mechanical strength.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Mode of access: Internet.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

"Estratto dagli Atti e memorie della R. Accademia di scienze, lettere ed arti di Padova, anno CCXCVII, nuova serie, vol. XII, pag. 119-149."

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Includes index, error and correction list.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

En la civilización de la antigua Roma, tres de los aspectos más importantes de la vida cotidiana estaban vinculados a la arquitectura: las termas, los acueductos y las tumbas. Esta investigación propone el estudio de la integración de sistemas avanzados para la documentación, gestión y valorización del patrimonio arquitectónico funerario de la Vie Latina y la Appia Antica, en estrecha relación con el tema del Paisaje Cultural. De hecho, el Parque de las Tumbas Latinas alberga uno de los complejos funerarios más importantes, que en la actualidad conserva el aspecto tradicional del antiguo paisaje romano. A lo largo de una vía empedrada, como todas las vías consulares, la Vía Latina (al igual que la Vía Appia Antica), que, como recordaba Tito Livio, conectaba en su día las ciudades de Roma con Capua, sigue manteniendo "congelado" el antiguo trazado urbano/paisajístico. El sistema multiforme del Ager Romanus y del sitio cultural Via Latina/Appia Antica estudiado en esta investigación es, por tanto, comparable a una estructura viva y dinámica y, como tal, debe ser analizada. Por lo tanto, para diseñar una herramienta de protección y gestión tan "potente" y adecuada para un sitio histórico de enorme importancia, fue necesario utilizar las técnicas de levantamiento arquitectónico más avanzadas que se utilizan actualmente (como el escaneo láser y la fotogrametría, junto con un software de análisis específico), acompañadas de un estudio en profundidad de las técnicas de construcción antiguas. El último aspecto clave que pretende abordar la investigación es la catalogación. De hecho, los sitios y monumentos históricos no se pueden mantener sólo mediante su uso y utilización pasiva, sino activando todas las operaciones de protección y conservación mediante intervenciones directas (mantenimiento/restauración) e indirectas, como la catalogación constante de las obras históricas y la consiguiente "catalogación dinámica".

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Bibliographical foot-notes.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Plate XXXI showing the raising of the Colonna Antonina is by Arnold Westerhout after Francesco Fontana.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Este artículo se propone analizar la escena del cresmólogo intruso en Aves, revalorizando la comedia aristofánica como fuente de conocimiento histórico. Este análisis se centra en la práctica oracular como una técnica de producción escrita vinculada a la autoridad religiosa. De esta manera, se exploran dos campos de estudios, como la comedia antigua y la adivinación griega, cuyo vínculo no ha sido explorado en profundidad. Para dar cuenta del momento crítico de la institución oracular durante la Guerra del Peloponeso, se reconstruyen perspectivas sobre dicho fenómeno en otras fuentes como Tucídides o Demóstenes. Esto no solo ofrece una mirada «cómica» sobre la adivinación, sino que también permite comprender la práctica oracular como técnica y, en consecuencia, qué elementos de su funcionamiento podían ser manipulados.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

First one of a two-part analysis on the influence of the Classical Tradition on a favourite theme along the Dutch painters of the Golden Age, The doctor’s visit or The lovesick maiden, especially in the Leiden artist’s production, Jan Steen (1626-1679).

Relevância:

40.00% 40.00%

Publicador:

Resumo:

This thesis wad aimed at the study and application of titanium dioxide photocatalytic activity on ceramic materials. As a matter of fact, photocatalysis is a very promising method to face most of the problems connected with the increasing environmental pollution. Furthermore, titanium dioxide, in its anatase crystallographic phase, is one of the most investigated photocatalytic material and results to be perfectly compatible with silicate body mixes. That goal was pursued by two different strategies: 1. the addition to a body mix used for heavy clay products of several titania powders, with different mean crystallite size, surface area, morphology and anatase/rutile ratio and a titania nanosuspension as well. The titania addition followed two procedures: bulk and spray addition over the ceramic samples surface. Titania was added in two different percentages: 2.5 and 7.5 wt.% in both of the methods. The ceramic samples were then fired at three maximum temperatures: 900, 950 and 1000 °C. Afterwards, the photocatalytic activity of the prepared ceramic samples was evaluated by following the degradation of an organic compound in aqueous medium, under UV radiation. The influence of titania morphological characteristics on the photoactivity of the fired materials was studied by means of XRD and SEM observations. The ceramic samples, sprayed with a slip containing 7.5 wt.% of titania powder and fired at 900 °C, have the best photoactivity, with a complete photo-decomposition of the organic compound. At 1000 °C no sample acted as a photocatalyst due to the anatase-to-rutile phase transformation and to the reaction between titania and calcium and iron oxides in the raw materials. 2. The second one foresaw the synthesis of TiO2-SiO2 solid solutions, using the following stoichiometry: Ti1-xSixO2 where x = 0, 0.1, 0.3 and 0.5 atoms per formula unit (apfu). The mixtures were then fired following two thermal cycles, each with three maximum temperatures. The effect of SiO2 addition into the TiO2 crystal structure and, consequently, on its photocatalytic activity when fired at high temperature, was thoroughly investigated by means of XRD, XPS, FE-SEM, TEM and BET analysis. The photoactivity of the prepared powders was assessed both in gas and liquid phase. Subsequently, the TiO2-SiO2 solid solutions, previously fired at 900 °C, were sprayed over the ceramic samples surface in the percentage of 7.5 wt.%. The prepared ceramic samples were fired at 900 and 1000 °C. The photocatalytic activity of the ceramic samples was evaluated in liquid phase. Unfortunately, that samples did not show any appreciable photoactivity. In fact, samples fired at 900 °C showed a pretty low photoactivity, while the one fired at 1000 °C showed no photoactivity at all. This was explained by the excessive coarsening of titania particles. To summarise, titania particle size, more than its crystalline phase, seems to have a relevant role in the photocatalytic activity of the ceramic samples.