Complexe d'épaule dans un contexte d'analyse tridimentionnel - Modélisation et mise en garde

L'épaule est un complexe articulaire formé par le thorax, la clavicule, la scapula et l'humérus. Alors que les orientation et position de ces derniers la rendent difficile à étudier, la compréhension approfondie de l'interrelation de ces segments demeure cliniquement importante. Ainsi, un nouveau modèle du membre supérieur est développé et présenté. La cinématique articulaire de 15 sujets sains est collectée et reconstruite à l'aide du modèle. Celle-ci s'avère être généralement moins variable et plus facilement interprétable que le modèle de référence. Parallèlement, l'utilisation de simplifications, issues de la 2D, sur le calcul d'amplitude de mouvement en 3D est critiquée. Cependant, des cas d'exception où ces simplifications s'appliquent sont dégagés et prouvés. Ainsi, ils sont une éventuelle avenue d'amélioration supplémentaire des modèles sans compromission de leur validé.

Euler angles, Bryant angles and Euler parameters

This chapter deals with the different approaches for describing the rotational coordinates in spatial multibody systems. In this process, Euler angles and Bryant angles are briefly characterized. Particular emphasis is given to Euler parameters, which are utilized to describe the rotational coordinates in the present work. In addition, for all the types of coordinates considered in this chapter, a characterization of the transformation matrix is fully described.

Non compact euclidean cone 3-manifolds with cone angles less than 2∏

We study of noncompact Euclidean cone manifolds with cone angles less than c&2π and singular locus a submanifold. More precisely, we describe its structure outside a compact set. As a corol lary we classify those with cone angles & 2π/3 and those with cone angles = 2π/3.

A new approach to accurate measurement of uniaxial joint angles based on a combination of accelerometers and gyroscopes.

A new method of measuring joint angle using a combination of accelerometers and gyroscopes is presented. The method proposes a minimal sensor configuration with one sensor module mounted on each segment. The model is based on estimating the acceleration of the joint center of rotation by placing a pair of virtual sensors on the adjacent segments at the center of rotation. In the proposed technique, joint angles are found without the need for integration, so absolute angles can be obtained which are free from any source of drift. The model considers anatomical aspects and is personalized for each subject prior to each measurement. The method was validated by measuring knee flexion-extension angles of eight subjects, walking at three different speeds, and comparing the results with a reference motion measurement system. The results are very close to those of the reference system presenting very small errors (rms = 1.3, mean = 0.2, SD = 1.1 deg) and excellent correlation coefficients (0.997). The algorithm is able to provide joint angles in real-time, and ready for use in gait analysis. Technically, the system is portable, easily mountable, and can be used for long term monitoring without hindrance to natural activities.

Measurement of multi-segment foot joint angles during gait using a wearable system.

Usually the measurement of multi-segment foot and ankle complex kinematics is done with stationary motion capture devices which are limited to use in a gait laboratory. This study aimed to propose and validate a wearable system to measure the foot and ankle complex joint angles during gait in daily conditions, and then to investigate its suitability for clinical evaluations. The foot and ankle complex consisted of four segments (shank, hindfoot, forefoot, and toes), with an inertial measurement unit (3D gyroscopes and 3D accelerometers) attached to each segment. The angles between the four segments were calculated in the sagittal, coronal, and transverse planes using a new algorithm combining strap-down integration and detection of low-acceleration instants. To validate the joint angles measured by the wearable system, three subjects walked on a treadmill for five minutes at three different speeds. A camera-based stationary system that used a cluster of markers on each segment was used as a reference. To test the suitability of the system for clinical evaluation, the joint angle ranges were compared between a group of 10 healthy subjects and a group of 12 patients with ankle osteoarthritis, during two 50-m walking trials where the wearable system was attached to each subject. On average, over all joints and walking speeds, the RMS differences and correlation coefficients between the angular curves obtained using the wearable system and the stationary system were 1 deg and 0.93, respectively. Moreover, this system was able to detect significant alteration of foot and ankle function between the group of patients with ankle osteoarthritis and the group of healthy subjects. In conclusion, this wearable system was accurate and suitable for clinical evaluation when used to measure the multi-segment foot and ankle complex kinematics during long-distance walks in daily life conditions.

Cardan Gear Mechanism versus Slider-Crank Mechanism in Pumps and Engines

In machine design we always want to save space, save energy and produce as much power as possible. We can often reduce accelerations, inertial loads and energy consumption by changing construction. In this study the old cardan gear mechanism (hypocycloid mechanism) has been compared with the conventional slider-crank mechanism in air pumps and four-stroke engines. Comprehensive Newtonian dynamics has been derived for the both mechanisms. First the slidercrank and the cardan gear machines have been studied as lossless systems. Then the friction losses have been added to the calculations. The calculation results show that the cardan gear machines can be more efficient than the slider-crank machines. The smooth running, low mass inertia, high pressures and small frictional power losses make the cardan gear machines clearly better than the slider-crank machines. The dynamic tooth loads of the original cardan gear construction do not rise very high when the tooth clearances are kept tight. On the other hand the half-size crank length causes high bearing forces in the cardan gear machines. The friction losses of the cardan gear machines are generally quite small. The mechanical efficiencies are much higher in the cardan gear machines than in the slider-crank machines in normal use. Crankshaft torques and power needs are smaller in the cardan gear air pumps than in the equal slider-crank air pumps. The mean crankshaft torque and the mean output power are higher in the cardan gear four-stroke engines than in the slider-crank four-stroke engines in normal use. The cardan gear mechanism is at its best, when we want to build a pump or an engine with a long connecting rod (≈ 5⋅crank length) and a thin piston (≈ 1.5⋅crank length) rotating at high angular velocity and intermittently high angular acceleration. The cardan gear machines can be designed also as slide constructions without gears. Suitable applications of the cardan gear machines are three-cylinder half-radial engines for motorcycles, sixcylinder radial engines for airplanes and six-cylinder double half-radial engines for sport cars. The applied equations of Newtonian dynamics, comparative calculations, calculation results (tables, curves and surface plots) and recommendations presented in this study hold novelty value and are unpublished before. They have been made and written by the author first time in this study.

Calibration of angles of nozzles and deposition of an axial-flow sprayer on dwarf cashew

The study aimed to determine an optimum angle for the nozzles axial-flow sprayers a deposition for better vertical distribution focused on cashew. In laboratory tests were conducted adjusting the angle of the nozzle axial-flow sprayers. The experimental design was randomized blocks in a 2x3 factorial with four replications. The treatment for this test were two settings (with and without the adjustment of the angles of the nozzles ) and tree application volumes 273, 699 and 954 L ha-¹.The study was conducted in an orchard of dwarf cashew, with eight years of age. It was concluded that the volumetric distribution profile showed better vertical distribution uniformity when the angles of the nozzles were regulated for the canopy, the adjustment of the angles of the nozzles for the canopy provided greater deposition of droplets, the increased volume of application resulted in higher depositions in the leaves of the crop.

Will Kymlicka et les angles morts du libéralisme - Vers une théorie non-libérale du droit des minorités?

Will Kymlicka a formulé une théorie libérale du droit des minorités en arguant que l'on doit protéger les cultures minoritaires des influences extérieures, car, selon lui, ces cultures fournissent aux individus un contexte de choix significatif qui permet la prise de décision autonome. Il limite donc la portée de sa théorie aux minorités « culturelles », c'est-à-dire les minorités nationales et immigrantes, qui peuvent fournir ce contexte de choix significatif aux individus. Évidemment, les injustices vécues par ces deux types de minorités, aussi sévères soient-elles, n'épuisent pas les expériences d'injustices vécues par les membres de groupes minoritaires et minorisés (i.e. minorités sexuelles, femmes, Afro-Américains, etc.). On pourrait donc être tenté d'élargir la portée de la théorie du droit des minorités pour rendre compte de toutes les injustices vécues en tant que minorité. Toutefois, je défends la thèse selon laquelle cette extension est impossible dans le cadre d'une théorie libérale, car une de ses méthodes typiques, la « théorie idéale », limite la portée critique des thèses de Kymlicka et parce que l'autonomie individuelle a un caractère si fondamental pour les libéraux, qu'ils ne peuvent rendre compte du fait que certaines décisions individuelles autonomes peuvent contribuer à perpétuer des systèmes et des normes injustes.

Àngels i angles : un breu apunt sobre la recerca psicològica de les emocions a través de les aportacions de Nancy Eisemberg, Sarah Hapson, Paul Harris i Adolf Perinat. 'Ángeles y ángulos : un breve apunte sobre la investigación psicológica de las emociones a través de las aportaciones de Nancy Eisenberg, Sarah Hapson, Paul Harris y Adolf Perinat'.

Resumen de la revista en catalán

Energy separation of neutrons scattered at small angles from silicon using time-of-flight techniques

The time-of-flight technique is used on a small-angle neutron scattering instrument to separate the energies of the scattered neutrons, in order to determine the origin of the temperature-dependent scattering observed from silicon at Q > similar to 0.1 angstrom(-1). A quantitative analysis of the results in comparison with the phonon dispersion curves, determined by Dolling using a triple-axis neutron spectrometer, shows that the temperature-dependent scattering can be understood in terms of Umklapp processes whereby neutrons gain energy from phonons.