Characterization Of Anfo Explosive By High Accuracy Esi(±)-ftms With Forensic Identification On Real Samples By Easi(-)-ms.

Ammonium nitrate fuel oil (ANFO) is an explosive used in many civil applications. In Brazil, ANFO has unfortunately also been used in criminal attacks, mainly in automated teller machine (ATM) explosions. In this paper, we describe a detailed characterization of the ANFO composition and its two main constituents (diesel and a nitrate explosive) using high resolution and accuracy mass spectrometry performed on an FT-ICR-mass spectrometer with electrospray ionization (ESI(±)-FTMS) in both the positive and negative ion modes. Via ESI(-)-MS, an ion marker for ANFO was characterized. Using a direct and simple ambient desorption/ionization technique, i.e., easy ambient sonic-spray ionization mass spectrometry (EASI-MS), in a simpler, lower accuracy but robust single quadrupole mass spectrometer, the ANFO ion marker was directly detected from the surface of banknotes collected from ATM explosion theft.

Desmonte com explosivo em lavra subterrânea de carvão : avaliação do desempenho e utilização de ANFO

O desmonte com explosivos é uma das mais relevantes operações unitárias na lavra subterrânea de carvão no Brasil. Esta operação tem como objetivo a obtenção de ROM com uma distribuição granulométrica adequada, de tal forma que o impacto final na combinação com os custos de perfuração, limpeza e transporte sejam minimizados. A implantação de um controle de desempenho do desmonte, amparado em dados de geometria, análise de imagens e no monitoramento de vibrações, é uma ferramenta que permite avaliar as operações de desmonte. O controle de desempenho do desmonte deve englobar os seguintes parâmetros: geometria, desempenho do sistema de iniciação, desempenho da detonação, caracterização das propriedades do maciço rochoso e sua influência no processo de detonação, fragmentação e danos causados pelo desmonte às áreas adjacentes. Essa dissertação propõe métodos de diagnóstico para o desmonte com explosivos em subsolo amparados em dados de geometria, na análise de imagens e no monitoramento de vibrações. Investigou-se, também, a exeqüibilidade do uso de ANFO em perfuração de pequeno diâmetro com o objetivo de reduzir os custos globais de desmonte. Testes de desempenho foram realizados em superfície e subsolo, com um agente explosivo à base de nitrato de amônio e óleo combustível embalados em cartuchos plásticos. Complementando o controle de desempenho do desmonte e o estudo de viabilidade do emprego de ANFO, foi proposta a aplicação de metodologia para o controle de qualidade do sistema de iniciação das cargas explosivas com tubo de choque A adoção da metodologia desenvolvida mostrou-se apropriada para a elaboração de diagnósticos do desmonte com explosivos, tornando a tomada de decisão mais segura na introdução de melhorias nos sistemas de desmonte com explosivos possibilitando visualizar a necessidade de agregar qualidade à mão-de-obra com o desenvolvimento de programas de treinamento. Os estudos de adequação do ANFO apresentaram resultados positivos na sua aplicação em cenários particulares de desmonte subterrâneo, assim como a adoção da metodologia para o controle de qualidade dos sistemas de retardos demonstrou ser uma técnica eficiente e segura.

Determination of the JWL constants for ANFO and emulsion explosives from cylinder test data

The Jones-Wilkins-Lee (JWL) equation of state parameters for ANFO and emulsion-type explosives have been obtained from cylinder test expansion measurements. The calculation method comprises a new radial expansion function, with a non-zero initial velocity at the onset of the expansion in order to comply with a positive Gurney energy at unit relative volume, as the isentropic expansion from the CJ state predicts. The equations reflecting the CJ state conditions and the measured expansion energy were solved for the JWL parameters by a non-linear least squares scheme. The JWL parameters of thirteen ANFO and emulsion type explosives have been determined in this way from their cylinder test expansion data. The results were evaluated through numerical modelling of the tests with the LS-DYNA hydrocode; the expansion histories from the modelling were compared with the measured ones, and excellent agreement was found.

Study of Monoethanolamine Nitrate Content Reduction in Explosive Slurries

The reduction of the fuel content of a monoethanolamine nitrate (MEAN) fueled explosive slurry was investigated. The work was performed in three phases. The first one involved the MEAN content reduction in a reference slurry from its initial value of 36 down to 24% by weight, the balance being filled with ammonium nitrate, the least expensive item in the slurry composition. This proved to be successful, leading to an overall cost reduction of 17%, while keeping the overall performance quite satisfactory. The second phase consisted in trying to bring the MEAN content down from 24 to 17%. Although this led to further cost reduction, the formulations, obtained by substituting part of the MEAN content by ammonium nitrate/fuel oil (ANFO), produced unsatisfactory results regarding ignition and densities. In the third phase, the Design of Experiments Technique was used to find formulations displaying not only lower cost, but also acceptable overall performance. This led to a raw material cost reduction ranging from 23 to 26% relative to the initial reference slurry formulation.

On loader productivity, rock strength and explosive energy in metal mining

Twenty production blasts in two open pit mines were monitored, in rocks with medium to very high strength. Three different blasting agents (ANFO, watergel and emulsion blend) were used, with powder factors ranging between 0.88 and 1.45 kg/m3. Excavators were front loaders and rope shovels. Mechanical properties of the rock, blasting characteristics and mucking rates were carefully measured. A model for the calculation of the productivity of excavators is developed thereof, in which the production rate results as a product of an ideal, maximum, productivity rate times an operating efficiency. The maximum rate is a function of the dipper capacity and the efficiency is a function of rock density, strength, and explosive energy concentration in the rock. The model is statistically significant and explains up to 92 % of the variance of the production rate measurements.

Estudio de vibraciones en una cantera de caliza con empleo de detonadores electrónicos

El proyecto refleja el estudio de vibraciones entre dos voladuras, una iniciada con detonadores no eléctricos y otra iniciada con detonadores electrónicos, con aproximadamente la misma cantidad de explosivos y situadas en el mismo punto, en una explotación ubicada al sureste de la Comunidad de Madrid en el término municipal de Morata de Tajuña. Es una explotación en la que se extrae caliza mediante arranque por voladura utilizando como carga base una emulsión y como carga columna anfo. En la cantera suelen realizarse dos voladuras cada mes. El estudio de vibraciones se realizó debido a las quejas de los vecinos ante la onda aérea que producían las voladuras y las posibles grietas en estructuras cercanas a la explotación. ABSTRACT The project reflects the study of vibrations between two blasts, one started with nonelectric detonators and other with electronic detonators, with approximately the same amount of explosives placed in the same spot, on a quarry located at southeast of the Community of Madrid the town of Morata de Tajuña. It is a quarry where limestone is extracted by blasting using as base charge an emulsion, and ANFO as column charge. The quarry do two blast per month. The study of vibrations it´s did to the complains of the neighbors to the aerial wave that it´s produce by the blasts and possible cracks in the structures near at the quarry.

La productividad en la carga, la resistencia de la roca y la energía del explosivo

Twenty production blasts in two open pit mines were monitored, in rocks with medium to very high strength. Three different blasting agents (ANFO, watergel and emulsion blend) were used, with powder factors ranging between 0.88 and 1.45 kg/m3 . Excavators were front loaders and rope shovels. Mechanical properties of the rock, blasting characteristics and mucking rates were carefully measured. A model for the calculation of the productivity of excavators is developed thereof, in which the production rate results as a product of an ideal, maximum, productivity rate times an operating efficiency. The maximum rate is a function of the dipper capacity and the efficiency is a function of rock density, strength, and explosive energy concentration in the rock. The model is statistically significant and explains up to 92 % of the variance of the production rate measurements. RESUMEN Se han analizado veinte voladuras de producción en dos minas a cielo abierto, en rocas con resistencia entre media y muy alta. Se usaron tres agentes de voladura diferentes (ANFO, hidrogel y emulsión mezcla), con consumos específicos entre 0.88 y 1.45 kg/m3 . Las excavadoras eran cargadoras frontales y palas de cables. Se midió cuidadosamente las propiedades de la roca, las características de las voladuras y las velocidades de carga, a partir de las cuales se desarrolla un modelo para el cálculo de la productividad de las excavadoras en el que ésta es función de una productividad máxima o ideal multiplicada por una eficacia operativa. La producción máxima es función de la capacidad del cazo y la eficiencia es función de la densidad y resistencia de la roca, y de la concentración energética del explosivo en la roca. El modelo tiene significación estadística y explica un 92 % de la varianza de las medidas de velocidad.