Notes on analog-digital conversion techniques,

Mode of access: Internet.

Pipelined analog-to-digital conversion using current-mode reference shifting

Dissertação para obtenção do grau de Mestre em Engenharia Electrotécnica e de Computadores

An Analog-to-digital conversion supervision for the IBM 1800,

"Supported in part by National Science Foundation Grant No. NSF-GP-7634."

Use of chart readers for analog to digital conversion of hydrologic data /

Mode of access: Internet.

Mixed-signal analog-digital circuits design on the pre-diffused digital array using trapezoidal association of transistors

The mixed-signal and analog design on a pre-diffused array is a challenging task, given that the digital array is a linear matrix arrangement of minimum-length transistors. To surmount this drawback a specific discipline for designing analog circuits over such array is required. An important novel technique proposed is the use of TAT (Trapezoidal Associations of Transistors) composite transistors on the semi-custom Sea-Of-Transistors (SOT) array. The analysis and advantages of TAT arrangement are extensively analyzed and demonstrated, with simulation and measurement comparisons to equivalent single transistors. Basic analog cells were also designed as well in full-custom and TAT versions in 1.0mm and 0.5mm digital CMOS technologies. Most of the circuits were prototyped in full-custom and TAT-based on pre-diffused SOT arrays. An innovative demonstration of the TAT technique is shown with the design and implementation of a mixed-signal analog system, i. e., a fully differential 2nd order Sigma-Delta Analog-to-Digital (A/D) modulator, fabricated in both full-custom and SOT array methodologies in 0.5mm CMOS technology from MOSIS foundry. Three test-chips were designed and fabricated in 0.5mm. Two of them are IC chips containing the full-custom and SOT array versions of a 2nd-Order Sigma-Delta A/D modulator. The third IC contains a transistors-structure (TAT and single) and analog cells placed side-by-side, block components (Comparator and Folded-cascode OTA) of the Sigma-Delta modulator.

Frequency synthesizer using a hybrid analog/digital loop filter: A low complexity approach

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Ach, analog, digital - Quanten! Blitzkurs für alle Feinde des Digitalen und Technologieverächter

Die Natur integriert digitale und analoge Systeme umstandslos, man muss nur auf die Welt der Quantenmechanik schauen. Warum also diese Dauerproduktion gesellschaftlicher und kultureller Endzeitszenarien? Warum die Dauerbeschwörung der digitalen Bedrohung? Warum lassen wir uns nicht einfach auf das ein, was unsere physikalische Existenz grundlegend determiniert — die Koexistenz.

Graphical processing using hybrid analog-digital circuitry,

Bibliography: p. 74.

Digital Conversion and Media Reformatting: Management and Production of Digital Collections

The Digital Conversion and Media Reformatting plan was written in 2012 and revised 2013-2014, as a five-year plan for the newly established department at the University of Maryland Libraries under the Digital Systems and Stewardship Division. The plan focuses on increasing digitization production, both in-house and through vendors, and creates a model for the management of this production.

Comparação dos tempos de geração e digitação de laudos radiológicos entre um sistema eletrônico baseado em voz sobre IP (VoIP) e um sistema tradicional baseado em papel

OBJETIVO: Comparar os tempos de geração e digitação de laudos radiológicos entre um sistema eletrônico baseado na tecnologia de voz sobre o protocolo de internet (VoIP) e o sistema tradicional, em que o radiologista escreve o laudo à mão. MATERIAIS E MÉTODOS: Foi necessário modelar, construir e implantar o sistema eletrônico proposto, capaz de gravar o laudo em formato de áudio digital, e compará-lo com o tradicional já existente. Por meio de formulários, radiologistas e digitadores anotaram os tempos de geração e digitação dos laudos nos dois sistemas. RESULTADOS: Comparadas as médias dos tempos entre os sistemas, o eletrônico apresentou redução de 20% (p = 0,0410) do tempo médio de geração do laudo em comparação com o sistema tradicional. O tradicional foi mais eficiente em relação ao tempo de digitação, uma vez que a média de tempo do eletrônico foi três vezes maior (p < 0,0001). CONCLUSÃO: Os resultados mostraram diferença estatisticamente significante entre os sistemas comparados, sendo que o eletrônico foi mais eficiente do que o tradicional em relação ao tempo de geração dos laudos, porém, em relação ao tempo de digitação, o tradicional apresentou melhores resultados.

Multipurpose portable system for environmental, industrial, and medical applications

This dissertation is about the research carried on developing an MPS (Multipurpose Portable System) which consists of an instrument and many accessories. The instrument is portable, hand-held, and rechargeable battery operated, and it measures temperature, absorbance, and concentration of samples by using optical principles. The system also performs auxiliary functions like incubation and mixing. This system can be used in environmental, industrial, and medical applications. ^ Research emphasis is on system modularity, easy configuration, accuracy of measurements, power management schemes, reliability, low cost, computer interface, and networking. The instrument can send the data to a computer for data analysis and presentation, or to a printer. ^ This dissertation includes the presentation of a full working system. This involved integration of hardware and firmware for the micro-controller in assembly language, software in C and other application modules. ^ The instrument contains the Optics, Transimpedance Amplifiers, Voltage-to-Frequency Converters, LCD display, Lamp Driver, Battery Charger, Battery Manager, Timer, Interface Port, and Micro-controller. ^ The accessories are a Printer, Data Acquisition Adapter (to transfer the measurements to a computer via the Printer Port and expand the Analog/Digital conversion capability), Car Plug Adapter, and AC Transformer. This system has been fully evaluated for fault tolerance and the schemes will also be presented. ^

Analog eller digital summering vid mixning av ljud : Blir det någon skillnad i slutresultatet?

I denna uppsats undersöks huruvida en lyssnare kan skilja på två ljudmixar som är mixade på samma sätt men summerade på olika sätt. Den ena summeras analogt och den andra digitalt. Om så är fallet, hur tycker lyssnaren att dessa skillnader yttrar sig? Som metod fick en testpanel i ett blindtest lyssna på två olika mixar, en rocklåt och en jazzlåt, som båda fanns i både analogt och digitalt summerade versioner. Dessa fick testsubjekten sedan besvara några frågor kring och tycka till om dessa olika versioner i en kvalitativ enkätundersökning Det visade sig att skillnader uppfattades av merparten av lyssnarna. Den vanligast förekommande beskrivningen var att det var skillnad på stereobredd, djup och dynamik i mixarna beroende på hur de summerats. Även ord som klarhet, värme och tydlighet förekom. Testpanelen var överlag även väldigt bra på att gissa vilken version som var summerad på vilket sätt. Dessa gissningar verkar i på många fall vara baserad på den förutfattade meningen att analogt borde vara bättre. Det är ganska tydligt att detta forskningsarbete i mångt och mycket är en fallstudie för just de variabler som förekom (märke på den analoga summeraren, ljudkvalité på de inspelade ljudet, programmaterial med mera). Fler tester och undersökningar behövs för att kunna dra generella slutsatser.

Noise reduction in speech signals using a TMS320C31 digital signal processor

This paper describes a speech enhancement system (SES) based on a TMS320C31 digital signal processor (DSP) for real-time application. The SES algorithm is based on a modified spectral subtraction method and a new speech activity detector (SAD) is used. The system presents a medium computational load and a sampling rate up to 18 kHz can be used. The goal is load and a sampling rate up to 18 kHz can be used. The goal is to use it to reduce noise in an analog telephone line.

LMI-based digital redesign of linear time-invariant systems with state-derivative feedback

A simple method for designing a digital state-derivative feedback gain and a feedforward gain such that the control law is equivalent to a known and adequate state feedback and feedforward control law of a digital redesigned system is presented. It is assumed that the plant is a linear controllable, time-invariant, Single-Input (SI) or Multiple-Input (MI) system. This procedure allows the use of well-known continuous-time state feedback design methods to directly design discrete-time state-derivative feedback control systems. The state-derivative feedback can be useful, for instance, in the vibration control of mechanical systems, where the main sensors are accelerometers. One example considering the digital redesign with state-derivative feedback of a helicopter illustrates the proposed method. © 2009 IEEE.

Sistema de aquisição e comunicação para sensores magnetoelétricos

Dissertação de mestrado integrado em Engenharia Eletrónica Industrial e Computadores