Xilanase de Penicillium chrysogenum: produção em um resíduo agroindustrial, purificação e propriedades bioquímicas

Pós-graduação em Ciências Biológicas (Microbiologia Aplicada) - IBRC

Bioactive compounds of the lipid fractions of agro-industrial waste

This study aimed at evaluating the oils extracted from seeds originating from agro-industrial waste, in order to identify the presence of bioactive compounds. Therefore, determinations of fatty acid profile, triacylglycerols, tocopherol composition, phytosterols, phenolic compounds, total carotenoids, and antioxidant capacity were performed in the oils of grape, guava, melon, passion fruit, pumpkin, soursop, and tomato seeds. Antioxidant capacity analysis was performed by the methods DPPH• , ABTS•+, FRAP, and β-carotene/linoleic acid, besides measure of oxidative stability in the oils. The oils showed to be predominantly unsaturated with high percentage of linoleic essential fatty acid (38.8 to 79.4%), besides presenting significant quantities of tocopherols, phytosterols, and phenolic compounds. Tomato and guava oils showed better results in the antioxidant capacity tests and pumpkin oil had higher induction period in the oxidative stability test (65.3 h). The results obtained in this study collect information that enables the use of new alternative sources of vegetable oils, obtained from agroindustrial waste, which may serve as raw material for food, chemical, and pharmaceutical industries.

Compostagem de resíduos sólidos de frigorífico

Composting has been a viable and efficient alternative treatment to agroindustrial waste. This experiment was installed with the objective of analyzing the process of composting for slaughterhouse waste. Twelve piles of composting were prepared, using slaughterhouse waste, wheat straw and wood sawdust. The process was evaluated by daily temperature monitoring, observations of the occurrence of undesirable parameters (bad smell and/or ammoniacal smell, grease formation and presence of grubs and flies), as well as the capacity of recycling nutrients. The undesirable parameters were observed, on average, for the first five days after pile building; the temperatures increased, reaching 70 °C; chemical composition of compost showed relevant contents of macro and micronutrients, a high recycling potential. Utilization of impermeable floor and roof are recommended during the composting. The turning frequency used (15 days after pile building followed by turning) was adequate. The best relation of weight was 7.2 kg of waste for each kg of straw and 16.6 kg of waste for each kg of sawdust.

Avaliação de dois diferentes meios de cultura para o desenvolvimento de biopesticidas à base de Bacillus thuringiensis e sua aplicação em larvas de Aedes aegypti

The bacteria Bacillus thuringiensis var. israelensis (Bti) generates certain toxins with pesticide action, which can be used on the control of transmissible diseases by culicides, specially Aedes aegypti, the dengue vector. This biopesticide has been produced by submerged fermentation and, in Brazil, this production has been made by very little research centers and, more recently, by a unique small enterprise. For the implementation of a viable vectors control program through biopesticides, some studies about culture media are essential in order to join efficiency and low costs. In this way, agroindustrial wastes or by-products have been used as a nutrient source for the culture media production. In this study, corn steep liquor, a corn industrial processing by-product and tryptose, both with/without sugar addition, were compared as culture media. Cellular growth was evaluated by optical density at 620 nm, spore production by total viable cell count and LC50 by bioassays against 4th instar larvae. Among the four examined substrates, the medium composed by glucose plus corn steep liquor presented the best spore production and bioassay results.

Production, purification, and characterization of a major penicillium glabrum xylanase using brewer's spent grain as substrate

In recent decades, xylanases have been used in many processing industries. This study describes the xylanase production by Penicillium glabrum using brewer's spent grain as substrate. Additionally, this is the first work that reports the purification and characterization of a xylanase using this agroindustrial waste. Optimal production was obtained when P. glabrum was grown in liquid medium in pH 5.5, at 25 °C, under stationary condition for six days. The xylanase from P. glabrum was purified to homogeneity by a rapid and inexpensive procedure, using ammonium sulfate fractionation and molecular exclusion chromatography. SDS-PAGE analysis revealed one band with estimated molecular mass of 18.36 kDa. The optimum activity was observed at 60 °C, in pH 3.0. The enzyme was very stable at 50 °C, and high pH stability was verified from pH 2.5 to 5.0. The ion Mn2+ and the reducing agents β-mercaptoethanol and DTT enhanced xylanase activity, while the ions Hg2+, Zn2+, and Cu2+ as well as the detergent SDS were strong inhibitors of the enzyme. The use of brewer's spent grain as substrate for xylanase production cannot only add value and decrease the amount of this waste but also reduce the xylanase production cost. © 2013 Adriana Knob et al.

Isolamento de leveduras de um consórcio especializado e avaliação de seu potencial na produção de biossurfactantes em fontes alternativas de carbono

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Condicionamento de um subsolo exposto no cerrado por meio de resíduos e da revegetação

Pós-graduação em Agronomia - FEIS

Produção de amilases de Rhizopus microsporus var. oligosporus e hidrólise enzimática do bagaço de mandioca visando a produção de etanol por Saccharomyces cerevisiae

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Produção de amilases de Rhizopus microsporus var. oligosporus e hidrólise enzimática do bagaço de mandioca visando a produção de etanol por Saccharomyces cerevisiae

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Efeito da aplicação de composto orgânico sobre a qualidade do solo cultivado com cana-de-açúcar (Saccharum spp.)

A dinâmica ambiental possui capacidade limitada de reciclagem e a crescente utilização resíduos agroindustriais, especialmente na agricultura, pode levar a situações de poluição do solo e demais componentes ambientais. A manutenção da produtividade de ecossistemas agrícolas e naturais depende do processo de transformação da matéria orgânica e, por conseguinte, da biomassa microbiana do solo, e que é responsável pela decomposição e mineralização de resíduos no mesmo. A dinâmica natural dos microrganismos do solo, em constante mudança e adaptação, os torna um indicador sensível às mudanças resultantes de diferentes práticas de manejo agrícola. Sendo assim, conhecer essas alterações e suas interferências é fundamental para identificar estratégias adequadas de manejo, apontando técnicas de utilização adequadas. O objetivo deste trabalho foi avaliar a qualidade de um solo agrícola, cultivado com três variedades de cana-de-açúcar (Saccharum spp.), comparando a utilização de adubação mineral frente à utilização de fertilizante orgânico composto no período final de formação dos perfilhos (120 dias após o plantio). Foi implantado, em condições de campo, o cultivo de cana-de-açúcar (cana planta), utilizando as variedades RB 867515, RB 962869 e RB 855453, onde cada variedade foi cultivada de três formas distintas, sendo elas: plantio controle (CT) sem aplicação de insumos para adubação; plantio orgânico (OG) com aplicação de fertilizante orgânico; e plantio convencional (CV) com aplicação de adubação mineral, seguindo recomendações de adubação após análise química inicial do solo local. Cada parcela possuía 37 m2, com 5 sulcos de 5,0 m de comprimento e espaçamento de 1,5 m entrelinhas, sendo os três sulcos centrais formando a área útil. De acordo com a variedade e o tipo de adubação, foram formados nove tratamentos: T1 86CT, T2 96CT, T3 85CT, T4 6OG, T5 96OG, T6 85OG, T7 86CV, T8 96CV e T9 85CV, com delineamento estatístico de blocos ao acaso e quatro repetições. Os parâmetros químicos do solo analisados foram macronutrientes e micronutrientes; os parâmetros microbiológicos foram carbono da biomassa microbiana (CBM), respiração basal do solo (RBS), quociente metabólico (qCO2), número mais provável de fungos e bactérias do solo (NMP); e, por fim, a produtividade agrícola (t/ha). Os resultados foram submetidos a análise de variância (ANOVA) e à comparação das médias através do teste de Tukey (10%). Também foi realizada a análise de variância dos dados e correlação cofenética de Pearson para formação de dendogramas. Com base no período estudado, considerado como fase crítica da formação do canavial, concluiu-se que os parâmetros químicos que evidenciaram alterações no solo foram pH e os macronutrientes Mg, Al e SB, sendo os tratamentos orgânicos equivalentes e/ou melhores que os tratamentos convencionais. Para os parâmetros microbiológicos, o NMP de fungos apresentou os maiores valores nos tratamentos convencionais e controle. A produtividade agrícola não foi influenciada pelos diferentes tratamentos e insumos utilizados, independente da variedade de cana-de-açúcar utilizada. Por fim, foram observadas correlações positivas entre as variáveis CTC e quociente metabólico (qCO2) apontando potencial melhoria da qualidade do solo, com o emprego de insumos orgânicos

Avaliação da influência de surfactantes químico e biológico na hidrólise enzimática de casca de coco verde após pré-tratamento ácido/alcalino e com peróxido de hidrogênio alcalino

In Brazil many types of bioproducts and agroindustrial waste are generated currently, such as cacashew apple bagasse and coconut husk, for example. The final disposal of these wastes causes serious environmental issues. In this sense, waste lignocellulosic content, as the shell of the coconut is a renewable and abundant raw material in which its use has an increased interest mainly for the 2nd generation ethanol production. The hydrolysis of cellulose to reducing sugars such as glucose and xylose is catalysed by a group of enzymes called cellulases. However, the main bottleneck in the enzymatic hydrolysis of cellulose is the significant deactivation of the enzyme that shows irreversible adsorption mechanism leading to reduction of the cellulose adsorption onto cellulose. Studies have shown that the use of surfactants can modify the surface property of the cellulose therefore minimizing the irreversible binding. The main objective of the present study was to evaluate the influence of chemical and biological surfactants during the hydrolysis of coconut husk which was subjected to two pre-treatment in order to improve the accessibility of the enzymes to the cellulose, removing this way, part of the lignin and hemicellulose present in the structure of the material. The pre-treatments applied to coconut bagasse were: Acid/Alkaline using 0.6M H2SO4 followed by 1M NaOH, and the one with Alkaline Hydrogen Peroxide at a concentration of 7.35% (v/v) and pH 11.5. Both the material no treatment and pretreated were characterized using analysis of diffraction X-ray (XRD), Scanning Electron Microscopy (SEM) and methods established by NREL. The influence of both surfactants, chemical and biological, was used at concentrations below the critical micelle concentration (CMC), and the concentrations equal to the CMC. The application of pre-treatment with coconut residue was efficient for the conversion to glucose, as well as for the production of total reducing sugars, it was possible to observe that the pretreatment fragmented the structure as well as disordered the fibers. Regarding XRD analysis, a significant increase in crystallinity index was observed for pretreated bagasse acid/alkali (51.1%) compared to the no treatment (31.7%), while that for that treated with PHA, the crystallinity index was slightly lower, around 29%. In terms of total reducing sugars it was not possible to observe a significant difference between the hydrolysis carried out without the use of surfactant compared to the addition of Triton and rhamnolipid. However, by observing the conversions achieved during the hydrolysis, it was noted that the best conversion was using the rhamnolipíd for the husk pretreated with acid/alkali, reaching a value of 33%, whereas using Triton the higher conversion was 23.8%. The coconut husk is a residue which can present a high potential to the 2nd generation ethanol production, being the rhamonolipid a very efficient biosurfactant for use as an adjuvant in the enzymatic process in order to act on the material structure reducing its recalcitrance and therefore improving the conditions of access for enzymes to the substrate increasing thus the conversion of cellulose to glucose.

Avaliação da influência de surfactantes químico e biológico na hidrólise enzimática de casca de coco verde após pré-tratamento ácido/alcalino e com peróxido de hidrogênio alcalino

In Brazil many types of bioproducts and agroindustrial waste are generated currently, such as cacashew apple bagasse and coconut husk, for example. The final disposal of these wastes causes serious environmental issues. In this sense, waste lignocellulosic content, as the shell of the coconut is a renewable and abundant raw material in which its use has an increased interest mainly for the 2nd generation ethanol production. The hydrolysis of cellulose to reducing sugars such as glucose and xylose is catalysed by a group of enzymes called cellulases. However, the main bottleneck in the enzymatic hydrolysis of cellulose is the significant deactivation of the enzyme that shows irreversible adsorption mechanism leading to reduction of the cellulose adsorption onto cellulose. Studies have shown that the use of surfactants can modify the surface property of the cellulose therefore minimizing the irreversible binding. The main objective of the present study was to evaluate the influence of chemical and biological surfactants during the hydrolysis of coconut husk which was subjected to two pre-treatment in order to improve the accessibility of the enzymes to the cellulose, removing this way, part of the lignin and hemicellulose present in the structure of the material. The pre-treatments applied to coconut bagasse were: Acid/Alkaline using 0.6M H2SO4 followed by 1M NaOH, and the one with Alkaline Hydrogen Peroxide at a concentration of 7.35% (v/v) and pH 11.5. Both the material no treatment and pretreated were characterized using analysis of diffraction X-ray (XRD), Scanning Electron Microscopy (SEM) and methods established by NREL. The influence of both surfactants, chemical and biological, was used at concentrations below the critical micelle concentration (CMC), and the concentrations equal to the CMC. The application of pre-treatment with coconut residue was efficient for the conversion to glucose, as well as for the production of total reducing sugars, it was possible to observe that the pretreatment fragmented the structure as well as disordered the fibers. Regarding XRD analysis, a significant increase in crystallinity index was observed for pretreated bagasse acid/alkali (51.1%) compared to the no treatment (31.7%), while that for that treated with PHA, the crystallinity index was slightly lower, around 29%. In terms of total reducing sugars it was not possible to observe a significant difference between the hydrolysis carried out without the use of surfactant compared to the addition of Triton and rhamnolipid. However, by observing the conversions achieved during the hydrolysis, it was noted that the best conversion was using the rhamnolipíd for the husk pretreated with acid/alkali, reaching a value of 33%, whereas using Triton the higher conversion was 23.8%. The coconut husk is a residue which can present a high potential to the 2nd generation ethanol production, being the rhamonolipid a very efficient biosurfactant for use as an adjuvant in the enzymatic process in order to act on the material structure reducing its recalcitrance and therefore improving the conditions of access for enzymes to the substrate increasing thus the conversion of cellulose to glucose.

Eliminação/valorização de resíduos de frutas (kiwi) por digestão anaeróbia

Este estudo tem como objetivo a valorização económica de resíduos agroindustriais, nomeadamente resíduos de kiwi, por digestão anaeróbia de forma a otimizar a produção de biogás e a sua qualidade (% CH4). Trata-se de uma pesquisa experimental que consistiu na avaliação da produção de biogás usando diferentes proporções de substrato e inóculo, quatro valores distintos para a razão C:N, inóculo de diferentes digestores e colheita do inóculo em épocas distintas do ano. Os ensaios foram desenvolvidos num reator batch em condições mesofílicas, sendo o processo acompanhado por monitorização dos parâmetros: pH, Alcalinidade, Ácidos Gordos Voláteis (AGV), Sólidos Totais (ST), Sólidos Voláteis (SV), Carência Química de Oxigénio (CQO) e Carbono. Para a totalidade dos ensaios, o valor de pH no reator praticamente não apresentou variação, mantendo-se em torno de 7,0; a alcalinidade do meio, 1500 mg CaCO3/L, revelou-se adequada uma vez que no final do processo de DA a concentração de AGV (400-600 mg/L), nunca excede os valores considerados críticos. Os resultados obtidos apresentam valores interessantes para um número considerável de ensaios. Das 10 experiências realizadas, em duas foram obtidos resultados muito significativos em relação à literatura; o ensaio com 1% de substrato (experiência 2) registou uma produção de biogás de 1628 L/kg SV com uma %CH4 de 57% e o biogás de maior qualidade, 85% de metano, foi obtido no ensaio com 5% de resíduo de kiwi (experiência 10). As experiências em que se avaliou o efeito da razão C:N foram as menos produtivas, possivelmente devido à inibição da atividade da população microbiana pelo KNO3. A qualidade do inóculo revelou-se determinante num conjunto de ensaios, nomeadamente quando a sua colheita foi realizada no inverno, com o digestor a apresentar temperaturas bastante baixas. De acordo com os valores mais favoráveis para a produção de biogás, por tonelada de resíduo de kiwi poderá ser obtido um valor monetário bruto de 102 €, resolvendo-se um problema de eliminação deste resíduo, com valorização energética simultaneamente.

Administración en la cadena de suministro y su relación con el desempeño de las PYME del sector agroindustrial

En la actualidad las organizaciones están en búsqueda de una mejora continua, esto lleva a que las empresas hagan una revisión de estrategias que permitan alcanzar una posición de líderes en los diferentes sectores en los que se desempeñan. Una de las estrategias para lograr un alto posicionamiento en las nuevas empresas es la adecuada gestión que hacen de la cadena de suministro. El sector agroindustrial tiene un amplia cadena de suministro desde la obtención de materias primas hasta la llegada al cliente final, por su gran magnitud requiere de una adecuada administración de procesos que permitan ser eficaces y eficientes para alcanzar logros propuestos, aprovechar los recursos limitados con los que cuentan para su cumplimiento y, por último, la capacidad propia para la transformación de sus recursos. Para lograr que las empresas obtengan ventajas competitivas, es necesario que los distintos eslabones de la cadena de suministros cuenten con una capacidad de interacción que les permita, tanto agilizar como asegurar el éxito durante la incorporación de los nuevos productos en el mercado. Por medio de esta investigación se busca esclarecer y analizar la importancia de la administración en la cadena de suministro y la relación con el desempeño, basándose en las Pymes del sector agroindustrial. La intención es evaluar la información de diversos autores quienes han hablado de la relación que existe entre la cadena de suministro y su desempeño, teniendo en cuenta variables como el sector agroindustrial y las Pymes.

Rhamnolipid produced from agroindustrial wastes enhances hydrocarbon biodegradation in contaminated soil

A crude biosurfactant solution was produced by Pseudomonas aeruginosa growing on agroindustrial wastes as the substrate and used to study its effect on hydrocarbon biodegradation by the indigenous soil microflora under laboratory conditions. Two concentrations were studied at first and 1 mg of biosurfactant/g of soil showed to be the most efficient for the total petroleum hydrocarbon reduction, which reached 85% at the first 20 days in soil microcosms. Respirometric and microbial analyses showed that the biosurfactant added did not have toxic effects over the microbial population. The use of a biosurfactant for bioremediation has been limited because of its high cost production. Biosurfactants produced from cost-free by-products combines waste minimization with economic potential bioremediation process.