Mechanical properties of sheet metal under forming conditions

In the bulge test, a sheet metal specimen is clamped over a circular hole in a die and formed into a bulge by the hydraulic pressure on one side of the specirnen. As the unsupported part of the specimen is deformed in this way, its area is increased, in other words, the material is generally stretched and its thickness generally decreased. The stresses causing this stretching action are the membrane stresses in the shell generated by the hydraulic pressure, in the same way as the rubber in a toy balloon is stretched by the membrane stresses caused by the air inside it. The bulge test is a widely used sheet metal test, to determine the "formability" of sheet materials. Research on this forming process (2)-(15)* has hitherto been almost exclusively confined to predicting the behaviour of the bulged specimen through the constitutive equations (stresses and strains in relation to displacements and shapes) and empirical work hardening characteristics of the material as determined in the tension test. In the present study the approach is reversed; the stresses and strains in the specimen are measured and determined from the geometry of the deformed shell. Thus, the bulge test can be used for determining the stress-strain relationship in the material under actual conditions in sheet metal forming processes. When sheet materials are formed by fluid pressure, the work-piece assumes an approximately spherical shape, The exact nature and magnitude of the deviation from the perfect sphere can be defined and measured by an index called prolateness. The distribution of prolateness throughout the workpiece at any particular stage of the forming process is of fundamental significance, because it determines the variation of the stress ratio on which the mode of deformation depends. It is found. that, before the process becomes unstable in sheet metal, the workpiece is exactly spherical only at the pole and at an annular ring. Between the pole and this annular ring the workpiece is more pointed than a sphere, and outside this ring, it is flatter than a sphere. In the forming of sheet materials, the stresses and hence the incremental strains, are closely related to the curvatures of the workpiece. This relationship between geometry and state of stress can be formulated quantitatively through prolateness. The determination of the magnitudes of prolateness, however, requires special techniques. The success of the experimental work is due to the technique of measuring the profile inclination of the meridional section very accurately. A travelling microscope, workshop protractor and surface plate are used for measurements of circumferential and meridional tangential strains. The curvatures can be calculated from geometry. If, however, the shape of the workpiece is expressed in terms of the current radial (r) and axial ( L) coordinates, it is very difficult to calculate the curvatures within an adequate degree of accuracy, owing to the double differentiation involved. In this project, a first differentiation is, in effect, by-passed by measuring the profile inclination directly and the second differentiation is performed in a round-about way, as explained in later chapters. The variations of the stresses in the workpiece thus observed have not, to the knowledge of the author, been reported experimentally. The static strength of shells to withstand fluid pressure and their buckling strength under concentrated loads, both depend on the distribution of the thickness. Thickness distribution can be controlled to a limited extent by changing the work hardening characteristics of the work material and by imposing constraints. A technique is provided in this thesis for determining accurately the stress distribution, on which the strains associated with thinning depend. Whether a problem of controlled thickness distribution is tackled by theory, or by experiments, or by both combined, the analysis in this thesis supplies the theoretical framework and some useful experimental techniques for the research applied to particular problems. The improvement of formability by allowing draw-in can also be analysed with the same theoretical and experimental techniques. Results on stress-strain relationships are usually represented by single stress-strain curves plotted either between one stress and one strain (as in the tension or compression tests) or between the effective stress and effective strain, as in tests on tubular specimens under combined tension, torsion and internal pressure. In this study, the triaxial stresses and strains are plotted simultaneously in triangular coordinates. Thus, both stress and strain are represented by vectors and the relationship between them by the relationship between two vector functions. From the results so obtained, conclusions are drawn on both the behaviour and the properties of the material in the bulge test. The stress ratios are generally equal to the strain-rate ratios (stress vectors collinear with incremental strain vectors) and the work-hardening characteristics, which apply only to the particular strain paths are deduced. Plastic instability of the material is generally considered to have been reached when the oil pressure has attained its maximum value so that further deformation occurs under a constant or lower pressure. It is found that the instability regime of deformation has already occurred long before the maximum pressure is attained. Thus, a new concept of instability is proposed, and for this criterion, instability can occur for any type of pressure growth curves.

Avaliação da qualidade do ar interior e estudos CFD em espaços do ISEP

Mestrado em Engenharia Química. Ramo Tecnologias de Protecção Ambiental.

Estudo laboratorial e em condições reais sobre o aglomerado de cortiça expandida aplicado como revestimento exterior

Trabalho Final de Mestrado elaborado no Laboratório de Engenharia Civil para obtenção do grau de Mestre em Engenharia Civil na Área de Especialização de Edificações no âmbito do protocolo de cooperação entre o ISEL e o LNEC

Methodology for real-time adaptation of tunnels support using the observational method

The observational method in tunnel engineering allows the evaluation in real time of the actual conditions of the ground and to take measures if its behavior deviates considerably from predictions. However, it lacks a consistent and structured methodology to use the monitoring data to adapt the support system in real time. The definition of limit criteria above which adaptation is required are not defined and complex inverse analysis procedures (Rechea et al. 2008, Levasseur et al. 2010, Zentar et al. 2001, Lecampion et al. 2002, Finno and Calvello 2005, Goh 1999, Cui and Pan 2012, Deng et al. 2010, Mathew and Lehane 2013, Sharifzadeh et al. 2012, 2013) may be needed to consistently analyze the problem. In this paper a methodology for the real time adaptation of the support systems during tunneling is presented. In a first step limit criteria for displacements and stresses are proposed. The methodology uses graphics that are constructed during the project stage based on parametric calculations to assist in the process and when these graphics are not available, since it is not possible to predict every possible scenario, inverse analysis calculations are carried out. The methodology is applied to the “Bois de Peu” tunnel which is composed by two tubes with over 500 m long. High uncertainty levels existed concerning the heterogeneity of the soil and consequently in the geomechanical design parameters. The methodology was applied in four sections and the results focus on two of them. It is shown that the methodology has potential to be applied in real cases contributing for a consistent approach of a real time adaptation of the support system and highlight the importance of the existence of good quality and specific monitoring data to improve the inverse analysis procedure.

O poder local em Timor em contexto multicultural

O trabalho que agora se apresenta é fruto, antes de mais, de uma relação especial com Timor. Não necessariamente pela dimensão histórica das várias presenças naquele território mas, e acima de tudo, pela relação pessoal e afectiva com alguns dos responsáveis políticos e religiosos daquele jovem país. Um convite, formulado em 2007 por Xanana Gusmão, levou-nos a calcorrear todo o território num curto espaço de três semanas, corria o Verão de 2008. O objectivo era a análise, no terreno, da viabilidade da instalação de um poder local num país recentemente tornado independente. Timor, fruto da sua história e, muito em especial, das características antropológicas do seu povo, é uma nação assumidamente multicultural. Das origens ancestrais das suas comunidades, dos reinos dispersos que pulverizam o pequeno território, das suas lideranças e dos vários dilectos, associados à longa e marcante presença portuguesa, bem como outras ocupações de países estrangeiros, com destaque para a Indonésia, resulta um caldo cultural, a todos os níveis peculiar. Aqui e acolá ouvimos o povo, entrevistámos e reunimos com os 432 chefes de suco existentes no país, entrevistámos chefes de aldeia e anciãos, reunimos com políticos, sacerdotes, professores e jornalistas. Interpretámos, ou tentámos interpretar, as condicionantes e os cuidados que se devem observar na preparação do quadro jurídico para reger a municipalidade em Timor: as suas vertentes electivas, funcionais, financeiras e fiscalizadoras. Revistámos a História de Timor e passámos por Cabo Verde, país de referência internacional ao nível da sua gestão pública, muito em especial a autárquica. Fizemos, também, óbvia referência à história do poder local em Portugal. Das consultas, do muito que observámos e estudámos, resulta um desinteressado contributo para a implementação do poder local em Timor, com as conclusões que incorporam alertas e sugestões.

O poder local em Timor em contexto multicultural

This study, now on presentation, comes as a result of a special relationship established with East Timor. Not necessarily through the several historical presences in that territory but, above all, through the emotional and personal relationships with some of the political and religious leaders of this young country. An invitation, made in 2007 by Xanana Gusmão, led us throughout the whole territory in a short time of three weeks, running the summer of 2008. Its purpose was the analysis, on the ground, of the possibility of installing local administration in a country which had recently became independent. Timor, as a result of its history, but mostly of the anthropological characteristics of its people, is an openly multicultural nation. The ancestral origins of their communities, its scattered kingdoms that spray along such a small territory, its leaders and many dialects, associated with the long portuguese presence, as well as other occupations made by foreign countries, especially Indonesia, became a cultural melting pot truly unique. Here and there we heard the people and interviewed and met the 432 local elected leaders of the country. We interviewed village elders and meet with politicians, priests, teachers and journalists. We have interpreted, or tried to, the actual conditions and cautions that must be observed in preparing the legal framework to govern the municipality in East Timor: its elective, functional, financial and oversight aspects. We have reviewed Timor’s history and took Cape Verde’s example as an international reference on its public administration, mostly its local authorities. We made also the obvious reference to the portuguese local government’s history. From search, and much of the observed and studied, remains a selfless contribution to the implementation of local government in East Timor, with alerts that incorporate conclusions and suggestions.

Quelle perception ont les médecins de famille en Suisse de leur rôle dans la prévention et la promotion de la santé? : comprendre les barrières à l'implémentation

Introduction: The importance of health promotion and prevention and the potential of general practitioners (GPs) to conduct individual prevention procedures have been demonstrated in several studies. Clinical recommendations for screening and prevention activities, an important condition for success, are published regularly, but their implementation into daily practice does not necessarily follow. Information is lacking about the actual conditions of how prevention is carried out on a daily basis by Swiss GPs, about their perceptions and needs, their attitudes and the present barriers they face. Such information is essential for the development of new tools and programs targeting better implementation of clinical recommendations for prevention in primary care in Switzerland. Objectives: The objectives of the study were to analyze how Swiss GPs perceive their role in prevention by obtaining information regarding the following issues: What do disease prevention and health promotion mean to them? What are the current incentives and barriers they face? What are their ideas and suggestions to deal with these barriers? What are their needs and expectations regarding prevention guidelines and tools? Methods: We conducted a qualitative research project using focus groups to examine the questions mentioned above. A total of 13 focus groups took place including GPs from eight cantons: five groups in German- speaking Switzerland and eight in French- speaking Switzerland. Each group was composed of 4-11 GPs, making in total 102 participants, who were paid expenses to cover their participation. The sessions were audio-recorded and transcribed verbatim. Data analysis: Content analysis of the transcriptions began by classifying the data according to a typology, the first level of which was developed in line with the structure of the interview guide. This typology was extended by successively regrouping similar statements. Synopsis and interpretation was then performed on each category thus obtained. This research report is based on the results from the French-speaking cantons. Results: Physicians perceive a change in their role as a consequence of changes in society and the health system. They emphasize the importance of a personalized and long lasting relationship between the family doctor and his/her patient; a privileged position allowing them to perform individualized prevention activities, considered to be more effective, as they are appropriate to the specific situation and needs of the patient. They point out their need for training and for better information concerning prevention and health promotion interventions, and stress difficulties arising from the lack of a clear political signal conferring them with a mandate for prevention. -- INTRODUCTION L'importance de la prévention et de la promotion de la santé et le potentiel des médecins de famillea à mettre en oeuvre des mesures individuelles de prévention, de dépistage et de conseils, a été démontrée dans plusieurs études. Régulièrement durant les dernières années, de nombreuses associations médicales ont publié des recommandations cliniques concernant les activités de dépistage et de prévention qui sont une condition essentielle pour le succès, mais ne sont pas forcément appliquées de manière systématique dans la pratique médicale quotidienne. Des contraintes spécifiques contribuent à l'écart entre le désir des médecins de pratiquer une médecine préventive et la réalité d'un cabinet médical. Nous n'avons que peu de données sur les conditions actuelles dans lesquelles la prévention et la promotion de la santé sont réalisées par les médecins de famille suisses dans leur travail quotidien. Des informations précises et représentatives sur leurs perceptions et leurs besoins, leurs attitudes et les contraintes auxquelles ils sont confrontés manquent. Or ces données sont essentielles dans le développement de nouveaux outils et programmes visant une meilleure implémentation des recommandations cliniques dans le domaine de la prévention et la promotion de la santé dans la médecine de famille en Suisse. OBJECTIFS Le développement de concepts pour une prévention systématique ainsi que d'outils adéquats, tout comme l'amélioration des conditions qui permettent une implémentation à grande échelle, implique, avant tout, l'analyse de la perception que les médecins de famille suisses ont de leur rôle dans la prévention. Par conséquent, cette étude a eu pour objectif d'obtenir des informations concernant les questions suivantes : ? Que signifient la prévention et la promotion de la santé pour les médecins de famille suisses ? ? Quelles sont leurs incitations et les barrières rencontrées ? ? Quelles sont leurs idées et leurs suggestions pour faire face à ces contraintes ? ? Quels sont leurs besoins et leurs attentes concernant les outils pour la prévention ? METHODES Nous avons mené un projet de recherche qualitative en utilisant la technique des focus groups pour examiner les questions mentionnées ci-dessus. Une telle technique de collecte de données est particulièrement adaptée à un domaine où l'on connaît mal les perceptions des parties prenantes. Nous avons mené 13 focus groups au total, comprenant des médecins issus de huit cantons: cinq groupes ont eu lieu en Suisse alémanique et huit groupes en Suisse romande. Chaque groupe était composé de 4 à 11 médecins de famille, avec au total 102 participants qui ont été défrayés pour leur participation. Les séances ont été audio-enregistrées et transcrites. ANALYSE DES DONNEES L'analyse du contenu des transcriptions a commencé par la classification des données selon une typologie dont le premier niveau a été développé à partir de la structure de la grille d'entretiens. Cette typologie a été affinée et élargie en regroupant successivement des propos similaires. Une synthèse a été effectuée pour chaque catégorie. Ce rapport est basé sur les résultats de l'analyse des données des cantons francophones. RESULTATS Les médecins perçoivent un changement de leur rôle dans une société et dans un système de santé qui évoluent. Ils soulignent l'importance de la relation personnalisée et durable du médecin de famille avec son patient, atout précieux, qui leur permet de réaliser des activités de prévention individualisées et adaptées à la situation et aux besoins du patient, considérées plus efficaces. Afin de surmonter leur doutes et découragement par rapport aux interventions de prévention, ils pointent la nécessité d'une formation aux nouvelles connaissances en prévention et promotion de la santé et d'une meilleure information aux médecins quant à leur efficacité et importance. Ils montrent le besoin d'un signal clair des politiques par rapport à l'attribution de ce mandat aux médecins de famille et de leur reconnaissance en tant qu'acteur de prévention dans le système de santé.

L'éthique théologique de la libération d'Enrique Dussel : une réponse à la morale dominatrice

Le sous-continent latino-américain vit dans une pauvreté endémique où la lutte pour la survie est au quotidien. Les peuples deviennent de plus en plus pauvres et la vie de la personne humaine est méprisée. Est-il question d’une carence de biens matériels ou d’une mauvaise répartition de la richesse? Nous affirmons qu’il s’agit d’une situation de domination, d’oppression et d’injustice institutionnalisée. Ce mémoire tend à faire une lecture de l’éthique théologique de la libération d’Enrique Dussel dans une perspective émancipatoire. Nous partons du principe que cette éthique matérielle de la vie peut donner une réponse à la morale dominatrice établie et peut contribuer à la transformation de la situation injuste. L’éthique théologique de la libération dusselienne analyse l’être latino-américain considéré comme autre par le système en vigueur et cherche à changer qualitativement les conditions réelles de vie de chaque personne en communauté. Pour ce faire, elle repense de façon critique la totalité des principes de la morale dominatrice à partir de la négation de la vie des victimes et propose une alternative qui doit se réaliser ici maintenant dans l’histoire : la libération des victimes dans n’importe quel système de domination. Ce projet tient compte de la dimension spirituelle du peuple latino-américain. Un sous-continent dit majoritairement chrétien se questionne sur la présence de Dieu et de son agir dans la lutte quotidienne pour la libération. Il se demande comment vivre la foi en Dieu dans une situation d’oppression et de lutte pour la libération. C’est à ce parcours que ce mémoire nous convie en nous rappelant constamment qu’un monde meilleur est possible et que le Dieu de la vie n’abandonne pas sa création.

Diagnostic de l'accessibilité aux soins de santé en Haïti

L’accessibilité aux soins de santé est une priorité de nombreux gouvernements à travers le monde. En Haïti, les gouvernements se sont succédés et ont tenté à travers les années des interventions dont les résultats ne sont souvent pas satisfaisants. Le programme d’assistance médicale cubain, actuellement appliqué dans le pays, est en œuvre dans plus d’une vingtaine de pays en développement, mais il existe très peu d’évaluations indépendantes qui permettent de l’appréhender. Cet ouvrage se donne pour objectif de vérifier le bien fondé de cette intervention en tenant compte du contexte, d’établir la plausibilité en fonction des moyens du pays et finalement, de proposer des solutions qui améliorent la situation. Pour répondre à ces objectifs, l’étude de cas a été adoptée comme stratégie de recherche. Cette technique permet de mieux analyser le contexte, et de comprendre ses effets sur le programme. Des entrevues semi-structurées ont été réalisées pour permettre de faire les analyses stratégique et logique nécessaires pour atteindre les objectifs sus-cités. Les entrevues ont visé successivement la compréhension du modèle théorique, la détermination des problèmes pertinents auxquels fait le système de santé, les causes de la difficulté de rétention des professionnels et finale l’analyse du modèle. L’évaluation a révélé que l’accessibilité aux soins de santé est complexe et qu’un grand nombre de facteurs l’influencent. En Haïti, ces facteurs ne sont pas différents de ceux recensés dans la littérature. Mais la composante géographique associée à l’aspect administratif du système de santé en général constituent les éléments qui auraient l’impact le plus important sur l’accessibilité du système de santé. Vu les conditions actuelles, la modernisation de la gestion représente l’avenue à privilégier en attendant que les moyens permettent d’agir sur les autres facteurs. La rétention des professionnels de santé est un facteur essentiel de l’accessibilité aux soins de santé. Pour être efficace, les mécanismes de rétention utilisés doivent s’accompagner de mesures comme l’amélioration des conditions de travail, ainsi qu’un salaire compétitif. Les conditions de vie dans le milieu rural haïtien ne peuvent en rien être comparées à celles des pays développés. On ne peut espérer les mêmes résultats avec les programmes de rétention utilisés par cette intervention. Tenant compte du contexte socioéconomique et du tableau épidémiologique haïtien, il serait peut-être plus efficient de créer de nouveaux corps de métier. Ces derniers devraient être en mesure de régler les problèmes de santé simples, et occasionneraient des coûts moins importants. Ce serait à court terme et même à moyen terme une solution viable dans le contexte actuel. Le programme actuel s’il semble respecter les données probantes en matière d’accessibilité aux soins, néglige d’incorporer les paramètres spécifiques au milieu haïtien, nécessaires à l’atteinte de ses objectifs. La politisation excessive est aussi un facteur qui à terme pourrait conduire à l’échec de ce programme. Si à court terme le programme parvient à augmenter le nombre de professionnels de santé dans le pays, il est peu probable que cela dure. Les moyens précaires du pays ne lui permettent pas de se payer des professionnels hautement qualifiés dans les milieux sous desservis. L’intervention pour réussir doit intégrer les caractéristiques particulières du milieu et mettre plus d’accent sur la gestion du système.

Synthesis And Reactions Of Pyrazoldouinoxalines

The present work reports the synthesis of 2-ary1—3—oxo-3—pyrazolino[3,4-b]quinoxalines for the first time. These compounds have been prepared by the reaction of ethyl 2-chloroquinoxaline—3—carboxylate with different phenylhydrazines. 2-Aryl—3-oxo—3—pyrazolino[3,4—b]quinoxalines are generally light yellow in either neutral or acid solutions but changed the colour to deep violet or green in basic media. The change in colour appears to be sharp and therefore these compounds may be used as acid base indicators. Their UV absorption maxima under acidic and basic media are also very different. However, the actual conditions under which these compounds may be used as indicators have not been worked out. The synthesis and reactions of a new heterocyclic system, lH—l,5—benzodiazepino[2,3—b]quinoxaline is also reported here. This novel nitrogen heterocycke was prepared by the condensation of ethyl 2-chloroquinoxaline-3—carboxylate with o-phenylene diamine and subsequent manipulationsa to give the parent compound. Several derivatives which are expected tx> have valuable biological properties have also beenlreported. The structures of all new compounds have been established by elemental analysis and also by analysing their spectral data smch as ultraviolet, infrared, nuclear magnetic resonance and mass spectrometry. Compounds obtained from this work will be submitted for screening their biological properties.

A Modeling Analysis of Changing Global Land Use as affected by Changing Demands for Wood Products

The 21st century has brought new challenges for forest management at a time when globalization in world trade is increasing and global climate change is becoming increasingly apparent. In addition to various goods and services like food, feed, timber or biofuels being provided to humans, forest ecosystems are a large store of terrestrial carbon and account for a major part of the carbon exchange between the atmosphere and the land surface. Depending on the stage of the ecosystems and/or management regimes, forests can be either sinks, or sources of carbon. At the global scale, rapid economic development and a growing world population have raised much concern over the use of natural resources, especially forest resources. The challenging question is how can the global demands for forest commodities be satisfied in an increasingly globalised economy, and where could they potentially be produced? For this purpose, wood demand estimates need to be integrated in a framework, which is able to adequately handle the competition for land between major land-use options such as residential land or agricultural land. This thesis is organised in accordance with the requirements to integrate the simulation of forest changes based on wood extraction in an existing framework for global land-use modelling called LandSHIFT. Accordingly, the following neuralgic points for research have been identified: (1) a review of existing global-scale economic forest sector models (2) simulation of global wood production under selected scenarios (3) simulation of global vegetation carbon yields and (4) the implementation of a land-use allocation procedure to simulate the impact of wood extraction on forest land-cover. Modelling the spatial dynamics of forests on the global scale requires two important inputs: (1) simulated long-term wood demand data to determine future roundwood harvests in each country and (2) the changes in the spatial distribution of woody biomass stocks to determine how much of the resource is available to satisfy the simulated wood demands. First, three global timber market models are reviewed and compared in order to select a suitable economic model to generate wood demand scenario data for the forest sector in LandSHIFT. The comparison indicates that the ‘Global Forest Products Model’ (GFPM) is most suitable for obtaining projections on future roundwood harvests for further study with the LandSHIFT forest sector. Accordingly, the GFPM is adapted and applied to simulate wood demands for the global forestry sector conditional on selected scenarios from the Millennium Ecosystem Assessment and the Global Environmental Outlook until 2050. Secondly, the Lund-Potsdam-Jena (LPJ) dynamic global vegetation model is utilized to simulate the change in potential vegetation carbon stocks for the forested locations in LandSHIFT. The LPJ data is used in collaboration with spatially explicit forest inventory data on aboveground biomass to allocate the demands for raw forest products and identify locations of deforestation. Using the previous results as an input, a methodology to simulate the spatial dynamics of forests based on wood extraction is developed within the LandSHIFT framework. The land-use allocation procedure specified in the module translates the country level demands for forest products into woody biomass requirements for forest areas, and allocates these on a five arc minute grid. In a first version, the model assumes only actual conditions through the entire study period and does not explicitly address forest age structure. Although the module is in a very preliminary stage of development, it already captures the effects of important drivers of land-use change like cropland and urban expansion. As a first plausibility test, the module performance is tested under three forest management scenarios. The module succeeds in responding to changing inputs in an expected and consistent manner. The entire methodology is applied in an exemplary scenario analysis for India. A couple of future research priorities need to be addressed, particularly the incorporation of plantation establishments; issue of age structure dynamics; as well as the implementation of a new technology change factor in the GFPM which can allow the specification of substituting raw wood products (especially fuelwood) by other non-wood products.

Organic consumers' attitudes and preferences regarding alternatives to piglet castration without anaesthesia and analgesia in organic farming - an explorative analysis

In Germany and other European countries piglets are routinely castrated in order to avoid the occurrence of boar taint, an off-flavour and off-odour of pork. Sensory perception of boar taint varies; however, it is regarded as very unpleasant by many people. Surgical castration which is an effective means against boar taint has commonly been performed without anaesthesia or analgesia within the piglets’ first seven days of life. Piglet castration without anaesthesia has been heavily criticised, as the assumption that young piglets perceive less pain than older animals cannot be supported by scientific evidence. Consequently, surgical castration is only allowed with anaesthesia and/or analgesia in organic farming throughout the European Union since January 2012. Abandoning piglet castration without pain relief requires the implementation of alternative methods which improve animal welfare while maintaining sensory meat quality. There are three relevant alternatives: castration with anaesthesia and/or analgesia to reduce pain, a vaccination against boar taint (immunocastration) and the fattening of uncastrated male pigs (fattening of boars) combined with measures to reduce and detect boar taint in meat. Consumers’ attitudes and opinions regarding the alternatives are an important factor with regard to the implementation of alternatives, as they are finally supposed to buy the meat. The objective of this dissertation was to explore organic consumers’ attitudes, preferences and willingness-to-pay regarding piglet castration without pain relief and the three alternatives. Important aspects for the evaluation of the alternatives and influencing factors (e.g. information, taste) on preferences and willingness-to-pay should also be identified. In autumn 2009 nine focus group discussions were conducted each followed by a Vickrey auction including a tasting of boar salami. Overall, 89 consumers of organic pork participated in the study. Information on piglet castration and alternatives (in three variants) was provided as a basis for discussion. The focus group data were analysed using qualitative content analysis. In order to compare the focus group results with those from the auctions, an innovative approach applying an adapted scoring model to further analyse the data set was used. The majority of participants were not aware that piglets are castrated without anaesthesia in organic farming. They reacted shocked and disappointed on learning about this practice which did not fit into their image of animal welfare standards in organic farming. Overall, the results show, that for consumers of organic pork castration with anaesthesia and analgesia as well as the fattening of boars may be acceptable alternatives in organic farming. Considering the strong food safety concerns regarding immunocastration, acceptance of this alternative may be questioned. Communication regarding alternatives to piglet castration without anaesthesia and analgesia should take into account that the relevance of the aspects animal welfare, food safety, taste and costs differs between alternatives. Furthermore, it seems advisable not to address an unappetizing topic like piglet castration directly at the point of sale so as not to deter consumers from buying organic pork. The issue of piglet castration demonstrates exemplarily that it is important for the organic sector to implement and maintain high animal welfare standards and communicate them in an appropriate way, thereby trying to prevent strong discrepancies between consumers’ expectations regarding animal husbandry in organic farming and actual conditions. So, disappointment of consumers and a loss of image due to negative reports about animal welfare issues can be avoided.

Programa Expo-USA para la empresa INBIMA SA

El siguiente proyecto se realizará, con el fin de determinar las mejores opciones de exportación que tiene la empresa Inbima SA. Inicialmente se trabajará una matriz para la selección del producto más adecuado para la exportación, a partir de la calificación de las características que tienen los productos que ofrece la empresa. Seguido de una investigación 6 países que se consideran compradores potenciales del producto que dará como resultado la pre-investigación de mercados; se procederá a indagar a fondo en los 3 principales países que se obtendrán como resultado de esta investigación. Después de la obtención de los resultados de los tres países, se hará la implementación de una nueva herramienta de costeo y mejoramiento de producto para seguir con la última fase en la cual se hallará el Análisis del Perfil Estratégico (APE) de la compañía, en donde se tendrá en cuenta el potencial del mercado bajo condiciones actuales, los principales competidores y las fortalezas y debilidades que presenta la empresa. Todo el desarrollo de este documento fue producto del arduo trabajo realizado por el Centro de Innovación y Desarrollo Empresarial de Universidad del Rosario, orientado principalmente por la directora del Área internacional Luz Sofía Méndez Álvarez.

On the evolution of the solar wind between 1 and 5 AU at the time of the Cassini Jupiter flyby: Multispacecraft observations of interplanetary coronal mass ejections including the formation of a merged interaction region

The Cassini flyby of Jupiter occurred at a time near solar maximum. Consequently, the pre-Jupiter data set reveals clear and numerous transient perturbations to the Parker Spiral solar wind structure. Limited plasma data are available at Cassini for this period due to pointing restrictions imposed on the instrument. This renders the identification of the nature of such structures ambiguous, as determinations based on the magnetic field data alone are unreliable. However, a fortuitous alignment of the planets during this encounter allowed us to trace these structures back to those observed previously by the Wind spacecraft near the Earth. Of the phenomena that we are satisfactorily able to trace back to their manifestation at 1 AU, two are identified as being due to interplanetary coronal mass ejections. One event at Cassini is shown to be a merged interaction region, which is formed from the compression of a magnetic cloud by two anomalously fast solar wind streams. The flux-rope structure associated with this magnetic cloud is not as apparent at Cassini and has most likely been compressed and deformed. Confirmation of the validity of the ballistic projections used here is provided by results obtained from a one-dimensional magnetohydrodynamic projection of solar wind parameters measured upstream near the Earth. It is found that when the Earth and Cassini are within a few tens of degrees in heliospheric longitude, the results of this one-dimensional model predict the actual conditions measured at 5 AU to an impressive degree. Finally, the validity of the use of such one-dimensional projections in obtaining quasi-solar wind parameters at the outer planets is discussed.

A framework for graphic description in book design

This project is concerned with the way that illustrations, photographs, diagrams and graphs, and typographic elements interact to convey ideas on the book page. A framework for graphic description is proposed to elucidate this graphic language of ‘complex texts’. The model is built up from three main areas of study, with reference to a corpus of contemporary children’s science books. First, a historical survey puts the subjects for study in context. Then a multidisciplinary discussion of graphic communication provides a theoretical underpinning for the model; this leads to various proposals, such as the central importance of ratios and relationships among parts in creating meaning in graphic communication. Lastly a series of trials in description contribute to the structure of the model itself. At the heart of the framework is an organising principle that integrates descriptive models from fields of design, literary criticism, art history, and linguistics, among others, as well as novel categories designed specifically for book design. Broadly, design features are described in terms of elemental component parts (micro-level), larger groupings of these (macro-level), and finally in terms of overarching, ‘whole book’ qualities (meta-level). Various features of book design emerge at different levels; for instance, the presence of nested discursive structures, a form of graphic recursion in editorial design, is proposed at the macro-level. Across these three levels are the intersecting categories of ‘rule’ and ‘context’, offering different perspectives with which to describe graphic characteristics. Contextbased features are contingent on social and cultural environment, the reader’s previous knowledge, and the actual conditions of reading; rule-based features relate to the systematic or codified aspects of graphic language. The model aims to be a frame of reference for graphic description, of use in different forms of qualitative or quantitative research and as a heuristic tool in practice and teaching.