Study on Accuracy of Judgments by Chinese Fingerprint Examiners

The interpretation of fingerprint evidence depends on the judgments of fingerprint examiners. This study assessed the accuracy of different judgments made by fingerprint examiners following the Analysis, Comparison, and Evaluation (ACE) process. Each examiner was given five marks for analysis, comparison, and evaluation. We compared the experts' judgments against the ground truth and used an annotation platform to evaluate how Chinese fingerprint examiners document their comparisons during the identification process. The results showed that different examiners demonstrated different accuracy of judgments and different mechanisms to reach them.

Fingerprint identification: advances since the 2009 National Research Council report

"This paper will discuss the major developments in the area of fingerprint" "identification that followed the publication of the National Research Council (NRC, of the US National Academies of Sciences) report in 2009 entitled: Strengthening Forensic Science in the United States: A Path Forward. The report portrayed an image of a field of expertise used for decades without the necessary scientific research-based underpinning. The advances since the report and the needs in selected areas of fingerprinting will be detailed. It includes the measurement of the accuracy, reliability, repeatability and reproducibility of the conclusions offered by fingerprint experts. The paper will also pay attention to the development of statistical models allow- ing assessment of fingerprint comparisons. As a corollary of these developments, the next challenge is to reconcile a traditional practice domi- nated by deterministic conclusions with the probabilistic logic of any statistical model. There is a call for greater candour and fingerprint experts will need to communicate differently on the strengths and limitations of their findings. Their testimony will have to go beyond the blunt assertion" "of the uniqueness of fingerprints or the opinion delivered ispe dixit."

Evidence evaluation in fingerprint comparison and automated fingerprint identification systems: modeling between finger variability

In the context of the investigation of the use of automated fingerprint identification systems (AFIS) for the evaluation of fingerprint evidence, the current study presents investigations into the variability of scores from an AFIS system when fingermarks from a known donor are compared to fingerprints that are not from the same source. The ultimate goal is to propose a model, based on likelihood ratios, which allows the evaluation of mark-to-print comparisons. In particular, this model, through its use of AFIS technology, benefits from the possibility of using a large amount of data, as well as from an already built-in proximity measure, the AFIS score. More precisely, the numerator of the LR is obtained from scores issued from comparisons between impressions from the same source and showing the same minutia configuration. The denominator of the LR is obtained by extracting scores from comparisons of the questioned mark with a database of non-matching sources. This paper focuses solely on the assignment of the denominator of the LR. We refer to it by the generic term of between-finger variability. The issues addressed in this paper in relation to between-finger variability are the required sample size, the influence of the finger number and general pattern, as well as that of the number of minutiae included and their configuration on a given finger. Results show that reliable estimation of between-finger variability is feasible with 10,000 scores. These scores should come from the appropriate finger number/general pattern combination as defined by the mark. Furthermore, strategies of obtaining between-finger variability when these elements cannot be conclusively seen on the mark (and its position with respect to other marks for finger number) have been presented. These results immediately allow case-by-case estimation of the between-finger variability in an operational setting.

New perspectives in the use of ink evidence in forensic science: Part III: Operational applications and evaluation.

The research reported in this series of article aimed at (1) automating the search of questioned ink specimens in ink reference collections and (2) at evaluating the strength of ink evidence in a transparent and balanced manner. These aims require that ink samples are analysed in an accurate and reproducible way and that they are compared in an objective and automated way. This latter requirement is due to the large number of comparisons that are necessary in both scenarios. A research programme was designed to (a) develop a standard methodology for analysing ink samples in a reproducible way, (b) comparing automatically and objectively ink samples and (c) evaluate the proposed methodology in forensic contexts. This report focuses on the last of the three stages of the research programme. The calibration and acquisition process and the mathematical comparison algorithms were described in previous papers [C. Neumann, P. Margot, New perspectives in the use of ink evidence in forensic science-Part I: Development of a quality assurance process for forensic ink analysis by HPTLC, Forensic Sci. Int. 185 (2009) 29-37; C. Neumann, P. Margot, New perspectives in the use of ink evidence in forensic science-Part II: Development and testing of mathematical algorithms for the automatic comparison of ink samples analysed by HPTLC, Forensic Sci. Int. 185 (2009) 38-50]. In this paper, the benefits and challenges of the proposed concepts are tested in two forensic contexts: (1) ink identification and (2) ink evidential value assessment. The results show that different algorithms are better suited for different tasks. This research shows that it is possible to build digital ink libraries using the most commonly used ink analytical technique, i.e. high-performance thin layer chromatography, despite its reputation of lacking reproducibility. More importantly, it is possible to assign evidential value to ink evidence in a transparent way using a probabilistic model. It is therefore possible to move away from the traditional subjective approach, which is entirely based on experts' opinion, and which is usually not very informative. While there is room for the improvement, this report demonstrates the significant gains obtained over the traditional subjective approach for the search of ink specimens in ink databases, and the interpretation of their evidential value.

Multifinger Feature Level Fusion Based Fingerprint Identification

Fingerprint based authentication systems are one of the cost-effective biometric authentication techniques employed for personal identification. As the data base population increases, fast identification/recognition algorithms are required with high accuracy. Accuracy can be increased using multimodal evidences collected by multiple biometric traits. In this work, consecutive fingerprint images are taken, global singularities are located using directional field strength and their local orientation vector is formulated with respect to the base line of the finger. Feature level fusion is carried out and a 32 element feature template is obtained. A matching score is formulated for the identification and 100% accuracy was obtained for a database of 300 persons. The polygonal feature vector helps to reduce the size of the feature database from the present 70-100 minutiae features to just 32 features and also a lower matching threshold can be fixed compared to single finger based identification

New perspectives in the use of ink evidence in forensic science: Part I. Development of a quality assurance process for forensic ink analysis by HPTLC

The level of information provided by ink evidence to the criminal and civil justice system is limited. The limitations arise from the weakness of the interpretative framework currently used, as proposed in the ASTM 1422-05 and 1789-04 on ink analysis. It is proposed to use the likelihood ratio from the Bayes theorem to interpret ink evidence. Unfortunately, when considering the analytical practices, as defined in the ASTM standards on ink analysis, it appears that current ink analytical practices do not allow for the level of reproducibility and accuracy required by a probabilistic framework. Such framework relies on the evaluation of the statistics of the ink characteristics using an ink reference database and the objective measurement of similarities between ink samples. A complete research programme was designed to (a) develop a standard methodology for analysing ink samples in a more reproducible way, (b) comparing automatically and objectively ink samples and (c) evaluate the proposed methodology in a forensic context. This report focuses on the first of the three stages. A calibration process, based on a standard dye ladder, is proposed to improve the reproducibility of ink analysis by HPTLC, when these inks are analysed at different times and/or by different examiners. The impact of this process on the variability between the repetitive analyses of ink samples in various conditions is studied. The results show significant improvements in the reproducibility of ink analysis compared to traditional calibration methods.

The relationship between forensic science and judicial error: a study covering error sources, bias, and remedies

Summary : Forensic science - both as a source of and as a remedy for error potentially leading to judicial error - has been studied empirically in this research. A comprehensive literature review, experimental tests on the influence of observational biases in fingermark comparison, and semistructured interviews with heads of forensic science laboratories/units in Switzerland and abroad were the tools used. For the literature review, some of the areas studied are: the quality of forensic science work in general, the complex interaction between science and law, and specific propositions as to error sources not directly related to the interaction between law and science. A list of potential error sources all the way from the crime scene to the writing of the report has been established as well. For the empirical tests, the ACE-V (Analysis, Comparison, Evaluation, and Verification) process of fingermark comparison was selected as an area of special interest for the study of observational biases, due to its heavy reliance on visual observation and recent cases of misidentifications. Results of the tests performed with forensic science students tend to show that decision-making stages are the most vulnerable to stimuli inducing observational biases. For the semi-structured interviews, eleven senior forensic scientists answered questions on several subjects, for example on potential and existing error sources in their work, of the limitations of what can be done with forensic science, and of the possibilities and tools to minimise errors. Training and education to augment the quality of forensic science have been discussed together with possible solutions to minimise the risk of errors in forensic science. In addition, the time that samples of physical evidence are kept has been determined as well. Results tend to show considerable agreement on most subjects among the international participants. Their opinions on possible explanations for the occurrence of such problems and the relative weight of such errors in the three stages of crime scene, laboratory, and report writing, disagree, however, with opinions widely represented in existing literature. Through the present research it was therefore possible to obtain a better view of the interaction of forensic science and judicial error to propose practical recommendations to minimise their occurrence. Résumé : Les sciences forensiques - considérés aussi bien comme source de que comme remède à l'erreur judiciaire - ont été étudiées empiriquement dans cette recherche. Une revue complète de littérature, des tests expérimentaux sur l'influence du biais de l'observation dans l'individualisation de traces digitales et des entretiens semi-directifs avec des responsables de laboratoires et unités de sciences forensiques en Suisse et à l'étranger étaient les outils utilisés. Pour la revue de littérature, quelques éléments étudies comprennent: la qualité du travail en sciences forensiques en général, l'interaction complexe entre la science et le droit, et des propositions spécifiques quant aux sources d'erreur pas directement liées à l'interaction entre droit et science. Une liste des sources potentielles d'erreur tout le long du processus de la scène de crime à la rédaction du rapport a également été établie. Pour les tests empiriques, le processus d'ACE-V (analyse, comparaison, évaluation et vérification) de l'individualisation de traces digitales a été choisi comme un sujet d'intérêt spécial pour l'étude des effets d'observation, due à son fort recours à l'observation visuelle et dû à des cas récents d'identification erronée. Les résultats des tests avec des étudiants tendent à prouver que les étapes de prise de décision sont les plus vulnérables aux stimuli induisant des biais d'observation. Pour les entretiens semi-structurés, onze forensiciens ont répondu à des questions sur des sujets variés, par exemple sur des sources potentielles et existantes d'erreur dans leur travail, des limitations de ce qui peut être fait en sciences forensiques, et des possibilités et des outils pour réduire au minimum ses erreurs. La formation et l'éducation pour augmenter la qualité des sciences forensiques ont été discutées ainsi que les solutions possibles pour réduire au minimum le risque d'erreurs en sciences forensiques. Le temps que des échantillons sont gardés a été également déterminé. En général, les résultats tendent à montrer un grand accord sur la plupart des sujets abordés pour les divers participants internationaux. Leur avis sur des explications possibles pour l'occurrence de tels problèmes et sur le poids relatif de telles erreurs dans les trois étapes scène de crime;', laboratoire et rédaction de rapports est cependant en désaccord avec les avis largement représentés dans la littérature existante. Par cette recherche il était donc possible d'obtenir une meilleure vue de l'interaction des sciences forensiques et de l'erreur judiciaire afin de proposer des recommandations pratiques pour réduire au minimum leur occurrence. Zusammenfassung : Forensische Wissenschaften - als Ursache und als Hilfsmittel gegen Fehler, die möglicherweise zu Justizirrtümern führen könnten - sind hier empirisch erforscht worden. Die eingestzten Methoden waren eine Literaturübersicht, experimentelle Tests über den Einfluss von Beobachtungseffekten (observer bias) in der Individualisierung von Fingerabdrücken und halbstandardisierte Interviews mit Verantwortlichen von kriminalistischen Labors/Diensten in der Schweiz und im Ausland. Der Literaturüberblick umfasst unter anderem: die Qualität der kriminalistischen Arbeit im Allgemeinen, die komplizierte Interaktion zwischen Wissenschaft und Recht und spezifische Fehlerquellen, welche nicht direkt auf der Interaktion von Recht und Wissenschaft beruhen. Eine Liste möglicher Fehlerquellen vom Tatort zum Rapportschreiben ist zudem erstellt worden. Für die empirischen Tests wurde der ACE-V (Analyse, Vergleich, Auswertung und Überprüfung) Prozess in der Fingerabdruck-Individualisierung als speziell interessantes Fachgebiet für die Studie von Beobachtungseffekten gewählt. Gründe sind die Wichtigkeit von visuellen Beobachtungen und kürzliche Fälle von Fehlidentifizierungen. Resultate der Tests, die mit Studenten durchgeführt wurden, neigen dazu Entscheidungsphasen als die anfälligsten für Stimuli aufzuzeigen, die Beobachtungseffekte anregen könnten. Für die halbstandardisierten Interviews beantworteten elf Forensiker Fragen über Themen wie zum Beispiel mögliche und vorhandene Fehlerquellen in ihrer Arbeit, Grenzen der forensischen Wissenschaften und Möglichkeiten und Mittel um Fehler zu verringern. Wie Training und Ausbildung die Qualität der forensischen Wissenschaften verbessern können ist zusammen mit möglichen Lösungen zur Fehlervermeidung im selben Bereich diskutiert worden. Wie lange Beweismitten aufbewahrt werden wurde auch festgehalten. Resultate neigen dazu, für die meisten Themen eine grosse Übereinstimmung zwischen den verschiedenen internationalen Teilnehmern zu zeigen. Ihre Meinungen über mögliche Erklärungen für das Auftreten solcher Probleme und des relativen Gewichts solcher Fehler in den drei Phasen Tatort, Labor und Rapportschreiben gehen jedoch mit den Meinungen, welche in der Literatur vertreten werden auseinander. Durch diese Forschungsarbeit war es folglich möglich, ein besseres Verständnis der Interaktion von forensischen Wissenschaften und Justizirrtümer zu erhalten, um somit praktische Empfehlungen vorzuschlagen, welche diese verringern. Resumen : Esta investigación ha analizado de manera empírica el rol de las ciencias forenses como fuente y como remedio de potenciales errores judiciales. La metodología empleada consistió en una revisión integral de la literatura, en una serie de experimentos sobre la influencia de los sesgos de observación en la individualización de huellas dactilares y en una serie de entrevistas semiestructuradas con jefes de laboratorios o unidades de ciencias forenses en Suiza y en el extranjero. En la revisión de la literatura, algunas de las áreas estudiadas fueron: la calidad del trabajo en ciencias forenses en general, la interacción compleja entre la ciencia y el derecho, así como otras fuentes de error no relacionadas directamente con la interacción entre derecho y ciencia. También se ha establecido una lista exhaustiva de las fuentes potenciales de error desde la llegada a la escena del crimen a la redacción del informe. En el marco de los tests empíricos, al analizar los sesgos de observación dedicamos especial interés al proceso de ACE-V (análisis, comparación, evaluación y verificación) para la individualización de huellas dactilares puesto que este reposa sobre la observación visual y ha originado varios casos recientes de identificaciones erróneas. Los resultados de las experimentaciones realizadas con estudiantes sugieren que las etapas en las que deben tornarse decisiones son las más vulnerables a lös factores que pueden generar sesgos de observación. En el contexto de las entrevistas semi-estructuradas, once científicos forenses de diversos países contestaron preguntas sobre varios temas, incluyendo las fuentes potenciales y existehtes de error en su trabajo, las limitaciones propias a las ciencias forenses, las posibilidades de reducir al mínimo los errores y las herramientas que podrían ser utilizadas para ello. Se han sugerido diversas soluciones para alcanzar este objetivo, incluyendo el entrenamiento y la educación para aumentar la calidad de las ciencias forenses. Además, se ha establecido el periodo de conservación de las muestras judiciales. Los resultados apuntan a un elevado grado de consenso entre los entrevistados en la mayoría de los temas. Sin embargo, sus opiniones sobre las posibles causas de estos errores y su importancia relativa en las tres etapas de la investigación -la escena del crimen, el laboratorio y la redacción de informe- discrepan con las que predominan ampliamente en la literatura actual. De este modo, esta investigación nos ha permitido obtener una mejor imagen de la interacción entre ciencias forenses y errores judiciales, y comenzar a formular una serie de recomendaciones prácticas para reducirlos al minimo.

New perspectives in the use of ink evidence in forensic science: Part III: Operational applications and evaluation

The research reported in this series of article aimed at (1) automating the search of questioned ink specimens in ink reference collections and (2) at evaluating the strength of ink evidence in a transparent and balanced manner. These aims require that ink samples are analysed in an accurate and reproducible way and that they are compared in an objective and automated way. This latter requirement is due to the large number of comparisons that are necessary in both scenarios. A research programme was designed to (a) develop a standard methodology for analysing ink samples in a reproducible way, (b) comparing automatically and objectively ink samples and (c) evaluate the proposed methodology in forensic contexts. This report focuses on the last of the three stages of the research programme. The calibration and acquisition process and the mathematical comparison algorithms were described in previous papers [C. Neumann, P. Margot, New perspectives in the use of ink evidence in forensic science-Part I: Development of a quality assurance process for forensic ink analysis by HPTLC, Forensic Sci. Int. 185 (2009) 29-37; C. Neumann, P. Margot, New perspectives in the use of ink evidence in forensic science- Part II: Development and testing of mathematical algorithms for the automatic comparison of ink samples analysed by HPTLC, Forensic Sci. Int. 185 (2009) 38-50]. In this paper, the benefits and challenges of the proposed concepts are tested in two forensic contexts: (1) ink identification and (2) ink evidential value assessment. The results show that different algorithms are better suited for different tasks. This research shows that it is possible to build digital ink libraries using the most commonly used ink analytical technique, i.e. high-performance thin layer chromatography, despite its reputation of lacking reproducibility. More importantly, it is possible to assign evidential value to ink evidence in a transparent way using a probabilistic model. It is therefore possible to move away from the traditional subjective approach, which is entirely based on experts' opinion, and which is usually not very informative. While there is room for the improvement, this report demonstrates the significant gains obtained over the traditional subjective approach for the search of ink specimens in ink databases, and the interpretation of their evidential value.

New perspectives in the use of ink evidence in forensic science : part III : operational applications and evaluation

The research reported in this series of article aimed at (1) automating the search of questioned ink specimens in ink reference collections and (2) at evaluating the strength of ink evidence in a transparent and balanced manner. These aims require that ink samples are analysed in an accurate and reproducible way and that they are compared in an objective and automated way. This latter requirement is due to the large number of comparisons that are necessary in both scenarios. A research programme was designed to (a) develop a standard methodology for analysing ink samples in a reproducible way, (b) comparing automatically and objectively ink samples and (c) evaluate the proposed methodology in forensic contexts. This report focuses on the last of the three stages of the research programme. The calibration and acquisition process and the mathematical comparison algorithms were described in previous papers [C. Neumann, P. Margot, New perspectives in the use of ink evidence in forensic science-Part I: Development of a quality assurance process for forensic ink analysis by HPTLC, Forensic Sci. Int. 185 (2009) 29-37; C. Neumann, P. Margot, New perspectives in the use of ink evidence in forensic science-Part II: Development and testing of mathematical algorithms for the automatic comparison of ink samples analysed by HPTLC, Forensic Sci. Int. 185 (2009) 38-50]. In this paper, the benefits and challenges of the proposed concepts are tested in two forensic contexts: (1) ink identification and (2) ink evidential value assessment. The results show that different algorithms are better suited for different tasks. This research shows that it is possible to build digital ink libraries using the most commonly used ink analytical technique, i.e. high-performance thin layer chromatography, despite its reputation of lacking reproducibility. More importantly, it is possible to assign evidential value to ink evidence in a transparent way using a probabilistic model. It is therefore possible to move away from the traditional subjective approach, which is entirely based on experts' opinion, and which is usually not very informative. While there is room for the improvement, this report demonstrates the significant gains obtained over the traditional subjective approach for the search of ink specimens in ink databases, and the interpretation of their evidential value.

Study of isotopic variations in black powder: reflections on the use of stable isotopes in forensic science for source inference.

Isotope ratio mass spectrometry (IRMS) has recently made its appearance in the forensic community. This high-precision technology has already been applied to a broad range of forensic fields such as illicit drugs, explosives and flammable liquids, where current, routinely used techniques have limited powers of discrimination. The conclusions drawn from the majority of these IRMS studies appear to be very promising. Used in a comparative process, as in food or drug authentication, the measurement of stable isotope ratios is a new and remarkable analytical tool for the discrimination or the identification of a substance with a definite source or origin. However, the research consists mostly of preliminary studies. The significance of this 'new' piece of information needs to be evaluated in light of a forensic framework to assess the actual potential and validity of IRMS, considering the characteristics of each field. Through the isotopic study of black powder, this paper aims at illustrating the potential of the method and the limitations of current knowledge in stable isotopes when facing forensic problems.

Haptics in forensics: the possibilities and advantages in using the haptic device for reconstruction approaches in forensic science

Non-invasive documentation methods such as surface scanning and radiological imaging are gaining in importance in the forensic field. These three-dimensional technologies provide digital 3D data, which are processed and handled in the computer. However, the sense of touch gets lost using the virtual approach. The haptic device enables the use of the sense of touch to handle and feel digital 3D data. The multifunctional application of a haptic device for forensic approaches is evaluated and illustrated in three different cases: the representation of bone fractures of the lower extremities, by traffic accidents, in a non-invasive manner; the comparison of bone injuries with the presumed injury-inflicting instrument; and in a gunshot case, the identification of the gun by the muzzle imprint, and the reconstruction of the holding position of the gun. The 3D models of the bones are generated from the Computed Tomography (CT) images. The 3D models of the exterior injuries, the injury-inflicting tools and the bone injuries, where a higher resolution is necessary, are created by the optical surface scan. The haptic device is used in combination with the software FreeForm Modelling Plus for touching the surface of the 3D models to feel the minute injuries and the surface of tools, to reposition displaced bone parts and to compare an injury-causing instrument with an injury. The repositioning of 3D models in a reconstruction is easier, faster and more precisely executed by means of using the sense of touch and with the user-friendly movement in the 3D space. For representation purposes, the fracture lines of bones are coloured. This work demonstrates that the haptic device is a suitable and efficient application in forensic science. The haptic device offers a new way in the handling of digital data in the virtual 3D space.

Bayesian Networks for Probabilistic Inference and Decision Analysis in Forensic Science

Continuing developments in science and technology mean that the amounts of information forensic scientists are able to provide for criminal investigations is ever increasing. The commensurate increase in complexity creates difficulties for scientists and lawyers with regard to evaluation and interpretation, notably with respect to issues of inference and decision. Probability theory, implemented through graphical methods, and specifically Bayesian networks, provides powerful methods to deal with this complexity. Extensions of these methods to elements of decision theory provide further support and assistance to the judicial system. Bayesian Networks for Probabilistic Inference and Decision Analysis in Forensic Science provides a unique and comprehensive introduction to the use of Bayesian decision networks for the evaluation and interpretation of scientific findings in forensic science, and for the support of decision-makers in their scientific and legal tasks. Includes self-contained introductions to probability and decision theory. Develops the characteristics of Bayesian networks, object-oriented Bayesian networks and their extension to decision models. Features implementation of the methodology with reference to commercial and academically available software. Presents standard networks and their extensions that can be easily implemented and that can assist in the reader's own analysis of real cases. Provides a technique for structuring problems and organizing data based on methods and principles of scientific reasoning. Contains a method for the construction of coherent and defensible arguments for the analysis and evaluation of scientific findings and for decisions based on them. Is written in a lucid style, suitable for forensic scientists and lawyers with minimal mathematical background. Includes a foreword by Ian Evett. The clear and accessible style of this second edition makes this book ideal for all forensic scientists, applied statisticians and graduate students wishing to evaluate forensic findings from the perspective of probability and decision analysis. It will also appeal to lawyers and other scientists and professionals interested in the evaluation and interpretation of forensic findings, including decision making based on scientific information.

On the use of IRMS in forensic science: proposals for a methodological approach.

The flourishing number of publications on the use of isotope ratio mass spectrometry (IRMS) in forensicscience denotes the enthusiasm and the attraction generated by this technology. IRMS has demonstratedits potential to distinguish chemically identical compounds coming from different sources. Despite thenumerous applications of IRMS to a wide range of forensic materials, its implementation in a forensicframework is less straightforward than it appears. In addition, each laboratory has developed its ownstrategy of analysis on calibration, sequence design, standards utilisation and data treatment without aclear consensus.Through the experience acquired from research undertaken in different forensic fields, we propose amethodological framework of the whole process using IRMS methods. We emphasize the importance ofconsidering isotopic results as part of a whole approach, when applying this technology to a particularforensic issue. The process is divided into six different steps, which should be considered for a thoughtfuland relevant application. The dissection of this process into fundamental steps, further detailed, enablesa better understanding of the essential, though not exhaustive, factors that have to be considered in orderto obtain results of quality and sufficiently robust to proceed to retrospective analyses or interlaboratorycomparisons.