Timing of fungicide applications for control of husk spot caused by Pseudocercospora macadamiae in macadamia

Pseudocercospora macadamiae is an important pathogen of macadamia in Australia, causing a disease known as husk spot. Growers strive to control the disease with a number of carbendazim and copper treatments. The aim of this study was to consider the macadamia fruit developmental stage at which fungicide application is most effective against husk spot, and whether application of copper-only applications at full-size fruit developmental stage toward the end of the season contributed to effective disease control. Fungicides were applied to macadamia trees at four developmental stages in three orchards in two subsequent production seasons. The effects of the treatments on disease incidence and severity were quantified using area under disease progress curve (AUDPC) and logistic regression models. Although disease incidence varied between cultivars, incidence and severity on cv. A16 showed consistent differences between the treatments. Most significant reduction in husk spot incidence occurred when spraying commenced at match-head sized-fruit developmental stage. All treatments significantly reduced husk spot incidence and severity compared with the untreated controls, and a significant positive linear relationship (R2 = 73%) between AUDPC and severity showed that timing of the first fungicide application is important for effective disease control. Application of fungicide at full-size fruit stage reduced disease incidence but had no impact on premature fruit drop.

Reduced fungicide use on a new Australian peanut cultivar, highly resistant to the late leaf spot and rust pathogens

Rust (caused by Puccinia arachidis) and late leaf spot (LLS, caused by Mycosphaerella berkeleyi) can cause significant yield losses in Australian peanut crops. Until recently, all commercial peanut varieties were highly susceptible to these pathogens, but the new Australian cultivar Sutherland has significantly higher levels of resistance than the older cultivars. Field trials were conducted at two sites in Queensland to (a) confirm the improved resistance of cv. Sutherland over another commercial cultivar, Menzies, (b) study the effects of timing of first spray, spray interval and cultivar on disease severity and yield, and (c) develop a suitable fungicide management program for cv. Sutherland. In the 2006 and 2007 trials, rust and LLS developed slower and had lower final disease ratings and AUDPC values on unsprayed plots of cv. Sutherland than on cv. Menzies. The timing of the first spray is critical in managing both rust and late leaf spot, with the results demonstrating that the first fungicide spray on cv. Sutherland should be applied as soon as rust and LLS are first seen on cv. Menzies. In most trials spray intervals of 14 days or 21 days were suitable to effectively control rust and LLS. In years with low disease pressure, few, if any, fungicide applications will be needed to manage the diseases, but in other years up to four sprays may be necessary. © Australasian Plant Pathology Society Inc. 2012.

Yield losses in grain sorghum due to rust infection

Although rust (caused by Puccinia purpurea) is a common disease in Australian grain sorghum crops, particularly late in the growing season (April onwards), its potential to reduce yield has not been quantified. Field trials were conducted in Queensland between 2003 and 2005 to evaluate the effect of sorghum rust on grain yield of two susceptible sorghum hybrids (Tx610 and Pride). Rust was managed from 28-35 days after sowing until physiological maturity by applying oxycarboxin (1 kg active ingredient/100 L of water/ha) every 10 days. When data were combined for the hybrids, yield losses ranged from 13.1% in 2005 to 3.2% in 2003 but differences in yield the between sprayed and unsprayed treatments were statistically significant (P a parts per thousand currency signaEuro parts per thousand 0.05) only in 2005. Final area under the disease progress curve (AUDPC) values reflected the yield losses in each year. The higher yield loss in 2005 can be attributed primarily to the early development of the rust epidemic and the higher inoculum levels in spreader plots at the time of planting of the trials.

Severidade de mancha de alternaria em genótipos de girassol no Cerrado do Distrito Federal.

RESUMO: Este trabalho teve como objetivo comparar a severidade da mancha de Alternaria de genótipos de girassol em ambientes do Cerrado do Distrito Federal. Três experimentos foram avaliados, dois na Embrapa Cerrados (Planaltina, DF) e um localizado na Embrapa Produtos e Mercado (Recanto das Emas, DF). Foram feitas análises ao longo do ciclo da cultura com um intervalo de 15 dias, sendo a primeira aos 35 dias após emergência. Cada planta foi analisada em três partes: terço inferior, terço médio e terço superior. Ao final de cada experimento, a área abaixo da curva de progresso da doença (AACPD) foi calculada para cada genótipo. De acordo com os resultados observados, o ambiente de sequeiro na Embrapa Cerrados, que deteve a maior média da severidade da doença, entre os ambientes avaliados. Dentre os genótipos avaliados, MG 360 mostrou menor severidade da doença no sequeiro e AGUARA 06 no irrigado da Embrapa Cerrados. O genótipo BSG 42 na Embrapa Produtos e Mercado, se destacou pela menor severidade do fungo. Houve influência significativa do ambiente nos resultados de severidade da doença, que está estreitamente relacionada com os fatores climáticos como temperatura e umidade relativa do ar. A compreensão dessas condições favoráveis ao desenvolvimento do fungo é essencial quando se avalia a resistência em genótipos de girassol. ABSTRACT: This study had the purpose of comparing the severity of Alternaria leaf spot on genotypes of sunflower in the Brazilian Cerrado. Three field trials were established, two at Embrapa Cerrados (Planaltina, DF) and one at Embrapa Produtos e Mercados (Recanto das Emas, DF). Evaluations were made during the crop cycle every 15 days, the first one happening 35 days after crop emergency. Each plant was analyzed in three parts: lower, middle and upper thirds. At the end of each trial the average area under the disease progress curve (AUDPC), for each third, was calculated for all genotypes. According to the observed results, the dryland environment at Embrapa Cerrados had the highest mean disease severity, among the studied environments. Between the evaluated genotypes, MG360 showed less severity in dryland and AGUARA 06 in the irrigated environment at Embrapa Cerrados. At Embrapa Produtos e Mercado the genotype that presented the best performance was BRS G42. Environmental conditions deeply affected the trials, mainly temperature and relative humidity. Their influence on Alternaria leaf spot epidemics in the Cerrado region must be studied in more detail, to avoid misinterpreting data when evaluating sunflower genotypes for resistance to this important fungal disease.

Progresso da ferrugem tropical do milho (Zea mays L.), sob diferentes tratamentos fungicidas

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Controle da ferrugem asiática e produtividade da soja após pulverizações de piraclostrobina + epoxiconazole em diferentes estádios fenológicos da cultura

Foi avaliado o desenvolvimento da ferrugem asiática e da produtividade da cultura da soja em razão de pulverizações fungicidas realizadas em diferentes estádios fenológicos da cultura. Os tratamentos consistiram na pulverização da mistura fungicida piraclostrobina + epoxiconazole no estádio fenológico V10 e R2; R2 e R5.2; apenas em R2; sem pulverização (testemunha). Os valores da AACPD total (área abaixo da curva de progresso da doença) e da produtividade da cultura da soja nos tratamentos com pulverização fungicida foram superiores ao tratamento testemunha. Até o 117º dia após a emergência das plantas, a aplicação de fungicida em V10 e R2 promoveu maior controle da ferrugem. Os resultados evidenciaram que a pulverização fungicida contra P. pachyrhizi é indispensável para diminuir as perdas na produtividade provocadas pela doença e que, em algumas situações, apenas uma pulverização fungicida no estádio R2 pode reduzir perdas significativas na produtividade.

Adjuvantes e assistência de ar em pulverizador de barras sobre a deposição da calda e controle de Phakopsora pachyrhizi (Sydow & Sydow)

Com o intuito de melhorar a cobertura da pulverização e diminuir as perdas na produtividade da cultura da soja, o estudo objetivou avaliar o efeito da adição de adjuvantes à calda combinado ou não ao uso da assistência de ar sobre a deposição da pulverização, controle de Phakopsora pachyrhizi H. Sydow & P. Sydow, perdas de produção (peso de 1000 grãos) e produtividade da cultura (kg ha-1). Dois experimentos a campo foram conduzidos na cultura da soja, variedade Conquista, safra agrícola 2008/09. Um deles no delineamento em blocos ao acaso com três doses de adjuvantes associados a um marcador cúprico combinadas a dois níveis de ar na barra de pulverização (0 e 29 km h-1), totalizando 6 tratamentos e 4 repetições. Outro experimento foi instalado no mesmo local do anterior. O delineamento experimental utilizado foi o de blocos ao acaso com 7 tratamentos: fungicida e dois adjuvantes associados ao fungicida, combinados a dois níveis de ar na barra de pulverização (0 e 29 km h-1), mais testemunha, e 4 repetições. Após a pulverização do fungicida piraclostrobina + epoxiconazole com diferentes tecnologias, procedeu-se a avaliação da severidade da doença através da estimativa da área abaixo da curva de progresso da doença (AACPD) e da produtividade da cultura da soja. A assistência de ar na velocidade máxima gerada pelo ventilador (29 km h-1), combinada ao fungicida piraclostrobina + epoxiconazole mais o adjuvante organosiliconado Silwet L-77 contribuiu para melhor controle da ferrugem asiática, proporcionando incremento na produtividade e no peso de 1000 grãos.

Evaluation of pyraclostrobin and acibenzolar-S-methyl on common bacterial blight of snap bean

Assays were done under greenhouse conditions in order to evaluate the effect of pyraclostrobin (0.0375, 0.0750 and 0.150 mL.L-1) and acibenzolar-S-methyl (ASM) (0.025 g.L-1) in common bacterial blight on leaves of snap beans cultivar Braganca. These chemicals were sprayed at three different times: five days before; five days before + five days after; and five days after leaf inoculation with an isolate of Xanthomonas axonopodis pv. phaseoli. They were determinate the levels of polyphenoloxidase, peroxidase and total soluble proteins on inoculated and non-inoculated leaves of snap beans sprayed with pyraclostrobin (0.075 g.L-1) and ASM (0.025 g.L-1). All concentration of pyraclostrobin and ASM reduced the area under the disease progress curve (AUDPC) on leaves of snap beans, and the least AUDPC value was observed when this products were sprayed five days before + five days after inoculation. Higher levels of polyphenoloxidase, peroxidase and the total soluble proteins were observed on leaves sprayed with pyraclostrobin or ASM.

Fungigação no controle do mofo branco e produtividade do feijoeiro em condições de cerrado brasileiro

The aim of this research was to evaluate the white mold severity (Sclerotinia sclerotiorum (Lib.) of Bary), bean production components and yield (Phaseolus vulgaris L.), variety Perola, according to the application of procimidone fungicide (Sialex 500), through fungigation (center pivot) and automotive sprayer (Uniport). The study was carried under field production commercial conditions, in Primavera do Leste - MT - Brazil. The experiment consisted of 5 treatments (with 4 repetitions of 4 ha each), all with two procimidone applications (1.2 kg ha-1 each application, same as, 0.6 kg a.i. per hectare) to the 42 and 52 days after seeding. The water depths of 5.5 and 11.0 mm were tested in the application through central pivot (this had your checked uniformity), providing volumes of 55.000 and 110.000 L ha-1, respectively, and the volumes of 120 and 200 L ha-1 in the automotive sprayer. The severity of disease was evaluated by the percentage of the area affected by plant damage using diagramatic grade scale of white mold severity, as described by Azevedo (1998). The values were used to calculate the area under the disease progress curve (AUDPC). They were also analyzed, the number of the fungus apothecia during the crop cycle and the residual sclerotias weight in harvest. On this occasion, it was also evaluated the crop yield parameters: number of plants per plot (final stand), pods per plant, grains per pod, medium weight of 200 grains and productivity of grains. The AUDPC values, apothecia to 42, 49 and 56 days after seeding, sclerotias in 2 soil kg and the crop productivity parameters were submitted to the variance analysis and Tukey Test at 0.05 of probability. This test was also applied in the comparison among the different fungicide application methods, independent of spray volumes in each one. The statistical processing was accomplished by STAT program. The results showed that weren't differences among application techniques studied in relation to productivity parameters, however, best white mold control, smaller apothecia number to 49 and 56 days after seeding and smaller weight of residual sclerotias in the harvest were obtained with the fungigation, independently of the spray volume used.

Efeito de produtos químicos sobre a mancha bacteriana (xanthomonas perforans) e na ativação de proteínas relacionadas à patogênese em tomateiro

The present study aims to evaluate the effect of fungicides and antibiotics to control bacterial spot (Xanthomonas perforans) in tomato, and the activation of pathogenesis-related proteins. Hybrid tomato AP 529 was used to assess the severity of disease. The treatments consisted of spraying with acibenzolar-S-methyl, fluazinam, pyraclostrobin, pyraclostrobin + methiran, copper oxychloride, copper oxychloride and mancozeb + oxytetracycline, and inoculated and non-inoculated controls. After three days of treatment, all plants were inoculated with X. perforans (10 6 CFU / mL). Leaf discs were collected for assessment of peroxidase, polyphenol oxidase, β-1,3 glucanase, phenylalanine ammonia lyase and protease. The area under the disease progress curve (AUDPC) was calculated with the data of severity. All treatments had reduced AUDPC compared to the inoculated control. Fungicides acibenzolar-S-methyl, pyraclostrobin, and pyraclostrobin + methiran had more satisfactory results in reducing the severity of bacterial spot on tomato. The products based on pyraclostrobin together with acibenzolar-S-methyl induced enzymatic activities of peroxidase, polyphenoloxidase and β-1,3 glucanase, indicating that these products may be related to the induction of resistance to bacterial spot on tomato plants.

Avaliação da indução de resistência no controle do vira cabeça do tomateiro

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Epidemiologia da mancha de phaeosphaeria e da cercosporiose em milho

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Curvas de progresso de doenças foliares do milho, sob diferentes tratamentos fungicidas

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Resposta de cultivares de milho a Colletotrichum graminicola

Pós-graduação em Agronomia (Produção Vegetal) - FCAV

Controle em pós-colheita de bolor verde em laranja pêra com microrganismos e tratamento térmico

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)