974 resultados para ACHT(Artificial Cytomixis Hybridization Technique)
Resumo:
用ACHT处理黑麦萌动种子,对修复前后材料的观察和分析结果表明:1. ACHT操作引起染色体数目变化和染色体断裂损失。在一定 条件和范围内,不同处理引起的这种变化具有显著差异,条件越剧烈,染色体数目变化的范围和频率愈大,断片发生的数量和频率 也愈高,同时修复前后染色体数目的变化范围和频率与断片发生的数量和频率以及它们的修复频率均表现明显的相关性。2. ACHT 操作引起染色体畸变的多样性。经ACHT处理后,胚根细胞染色体有4种断裂方式,包括着丝粒断裂、次溢痕断裂、长臂断裂和短臂 断裂等,其中着丝断裂频率最高;产生6种断片类型,包括有着丝粒和端粒的、有着丝粒而无端粒的、有部分着丝粒和端粒的、有 部分着丝粒而无端粒的、只有端粒的、既无着丝粒也无端粒的断片等。3. ACHT操作引起遗传结构重建的多样性。经ACHT处理后, 对修复24-72小时材料进行核型比较(按Stebbins 和 Levan 标准)和随体分析,处理细胞在染色体数目、大小、形态、位置等方面 均发生显著变化,说明ACHT处理使这些细胞的染色体结构和染色体组型发生了深刻变化。进一步通过Giemsa C— 带分析,观察到 多种重建染色体类型,包括易位型染色体、附加型染色体、无着丝粒染色体、化染色体、增加的m染色体以及某些带型特异的染色 体等。4. RAPD 分析从分子水平上验证了ACHT能有效地引起遗传结构的改变。所用10种引物对处理和对照材料基因组DNA的扩增产 物在条带数目、条带位置及带型特征等方面均有明显差异,其中4种引物出现条带减少,6种引物出现条带增加,后者还包括一个带 位移动。这说明两种材料的基因组DNA具有明显的RAPD反应多态性差异。This paper descripes some results draw on the basis of the observation and analysis on the rye before and after repaired through treating its budding seeds by ACHT in contrast to without ACHT: 1. ACHT manipulation caused the number variation and breakage damage of rye chromosome. Within certain conditions and timits, this phenomenon caused by different treats had signifcant difference: the more the treatment condition is drastie, the more the chageable range and frequence of rye chromosomae number, and so is the produced fragments. Meanwhile, there existed striking relationship among the changeable range and frequence of rye chromosome, the produced number and frequence of fragments and repairing frequence. 2. ACHT manipulafion engendered the diversify of rye chromosomal aberration. Four breakage patterns and six sorts of fragment were observed by watching the chromosome of the rye radicle treated by ACHT, including centric breakage (occuring in the highest frequence), secondary constriction breakage, long arm breakage and short arm breakage to the former, Comprising that with both centromere and telomere, that with centromere and without telomere, that with partial centromere and with telomere, that with partfial ceetromere and without telomere, that only with telomere and that neither with centromere nor with telomere, etc. 3. ACHT manipulation engendered the diversify or rye genetic structs reconstruction. Karureotype analysis(according to Stebbins and Levan) and satellite anaeysis were carried out to rye radicle through 24-72-hour-long recoverage after ACHT manipulation, which showed remarkable change happened on the rye chromosomal number、shape、arm ration and pattern, etc. and also on the satellite number、size、shape and location etc. Those indicated that ACHT manipulation engendered violent changes to rye chromatin structure and chromosome type. Further Giemsa C-banding analysis showed many types of reconstructed chromosome, such as translocation、addition、without centromere、st and other chromosome. 4. RAPD analysis checked the validity of ACHT on changing genetic structure of rye on the level of molecular biology. The treated and recovered rye has different amplifying band pattern by using IO valid arbitary primers selected from 40 comparing with the control.
Resumo:
Viable F-1 hybrids were obtained from crosses of female Macrobrachium nipponense and male Macrobrachium hainanense involving spermatophore transfer and artificial insemination. This represents the first successful known case of hybridization of two Macrobrachium species by means of artificial insemination. The hatching rate was over 90%. About 20-60% of newly hatched larvae metamorphosed to postlarvae. The morphological characteristics of the hybrids resembled a combination of features of both parents. Malate dehydrogenase (MDH) and esterase (EST) isozyme electrophoresis indicated parents and F-1 hybrids showed co-dominant expression of the paternal and maternal alleles controlling the isozymes and confirmed the hybridization. (C) 2004 Elsevier B.V. All rights reserved.
Resumo:
The mathematical formulation of empirically developed formulas Jirr the calculation of the resonant frequency of a thick-substrate (h s 0.08151 A,,) microstrip antenna has been analyzed. With the use qt' tunnel-based artificial neural networks (ANNs), the resonant frequency of antennas with h satisfying the thick-substrate condition are calculated and compared with the existing experimental results and also with the simulation results obtained with the use of an IE3D software package. The artificial neural network results are in very good agreement with the experimental results
Resumo:
Introduction: The purpose of this randomized clinical study was to evaluate the presence of the periodontal pathogen Aggregatibacter actinomycetemcomitans on metallic brackets and the effectiveness of a 0.12% chlorhexidine digluconate mouthwash in inhibiting this microorganism. Methods: The study involved 35 patients of both sexes having orthodontic treatment with fixed appliances between the ages of 14 and 22 years, randomized into 2 groups: experimental (n = 17) and control (n = 18). Two new metallic brackets were placed on the patients' premolars, and the subjects rinsed with a solution of 0.12% chlorhexidine digluconate or a placebo solution twice a week for 30 days. After that, the brackets were removed and underwent microbiologic analysis with the checkerboard DNA-DNA hybridization technique. Data were analyzed by using the Student t, Fisher exact, and Mann-Whitney tests at the significance level of 5%. Results: The results showed that A actinomycetemcomitans was present in all brackets from the subjects in the control group vs 83% of the subjects who rinsed with chlorhexidine digluconate (P<0.0001). There were also significantly lower levels of this species in the chlorhexidine digluconate group compared with the control group (P = 0.0003). Conclusions: We concluded that 0.12% chlorhexidine digluconate rinsing, twice a week for 30 days during orthodontic treatment, is effective in reducing the presence and levels of A actinomycetemcomitans on metallic brackets. (Am J Orthod Dentofacial Orthop 2012;142:481-6)
Resumo:
Abstract Background Bacteria associated with insects can have a substantial impact on the biology and life cycle of their host. The checkerboard DNA-DNA hybridization technique is a semi-quantitative technique that has been previously employed in odontology to detect and quantify a variety of bacterial species in dental samples. Here we tested the applicability of the checkerboard DNA-DNA hybridization technique to detect the presence of Aedes aegypti-associated bacterial species in larvae, pupae and adults of A. aegypti. Findings Using the checkerboard DNA-DNA hybridization technique we could detect and estimate the number of four bacterial species in total DNA samples extracted from A. aegypti single whole individuals and midguts. A. aegypti associated bacterial species were also detected in the midgut of four other insect species, Lutzomyia longipalpis, Drosophila melanogaster, Bradysia hygida and Apis mellifera. Conclusions Our results demonstrate that the checkerboard DNA-DNA hybridization technique can be employed to study the microbiota composition of mosquitoes. The method has the sensitivity to detect bacteria in single individuals, as well as in a single organ, and therefore can be employed to evaluate the differences in bacterial counts amongst individuals in a given mosquito population. We suggest that the checkerboard DNA-DNA hybridization technique is a straightforward technique that can be widely used for the characterization of the microbiota in mosquito populations.
Resumo:
Ellipsometry is a well known optical technique used for the characterization of reflective surfaces in study and films between two media. It is based on measuring the change in the state of polarization that occurs as a beam of polarized light is reflected from or transmitted through the film. Measuring this change can be used to calculate parameters of a single layer film such as the thickness and the refractive index. However, extracting these parameters of interest requires significant numerical processing due to the noninvertible equations. Typically, this is done using least squares solving methods which are slow and adversely affected by local minima in the solvable surface. This thesis describes the development and implementation of a new technique using only Artificial Neural Networks (ANN) to calculate thin film parameters. The new method offers a speed in the orders of magnitude faster than preceding methods and convergence to local minima is completely eliminated.
Resumo:
Common carp Cyprinus carpio genomic DNA repetitive sequence CR1 has been DIG-labeled and hybridized in situ against chromosomes of red common carp (Cyprinus carpio L. Xingguo red var.). It is found that the repetitive sequence CR1 is mainly localized at the centromeric regions of chromosomes of the red common carp, The application of the chromosomal in situ hybridization technique on fish and the relationship between CR1 repetitive sequence distribution and its function have been discussed.
Resumo:
Nucleosides in human urine and serum have frequently been studied as a possible biomedical marker for cancer, acquired immune deficiency syndrome (AIDS) and the whole-body turnover of RNAs. Fifteen normal and modified nucleosides were determined in 69 urine and 42 serum samples using high-performance liquid chromatography (HPLC). Artificial neural networks have been used as a powerful pattern recognition tool to distinguish cancer patients from healthy persons. The recognition rate for the training set reached 100%. In the validating set, 95.8 and 92.9% of people were correctly classified into cancer patients and healthy persons when urine and serum were used as the sample for measuring the nucleosides. The results show that the artificial neural network technique is better than principal component analysis for the classification of healthy persons and cancer patients based on nucleoside data. (C) 2002 Elsevier Science B.V. All rights reserved.
Resumo:
To evaluate the checkerboard DNA-DNA hybridization method for detection and quantitation of bacteria from the internal parts of dental implants and to compare bacterial leakage from implants connected either to cast or to pre-machined abutments. Nine plastic abutments cast in a Ni-Cr alloy and nine pre-machined Co-Cr alloy abutments with plastic sleeves cast in Ni-Cr were connected to Branemark-compatible implants. A group of nine implants was used as control. The implants were inoculated with 3 mu l of a solution containing 10(8) cells/ml of Streptococcus sobrinus. Bacterial samples were immediately collected from the control implants while assemblies were completely immersed in 5 ml of sterile Tripty Soy Broth (TSB) medium. After 14 days of anaerobic incubation, occurrence of leakage at the implant-abutment interface was evaluated by assessing contamination of the TSB medium. Internal contamination of the implants was evaluated with the checkerboard DNA-DNA hybridization method. DNA-DNA hybridization was sensitive enough to detect and quantify the microorganism from the internal parts of the implants. No differences in leakage and in internal contamination were found between cast and pre-machined abutments. Bacterial scores in the control group were significantly higher than in the other groups (P < 0.05). Bacterial leakage through the implant-abutment interface does not significantly differ when cast or pre-machined abutments are used. The checkerboard DNA-DNA hybridization technique is suitable for the evaluation of the internal contamination of dental implants although further studies are necessary to validate the use of computational methods for the improvement of the test accuracy. To cite this article:do Nascimento C, Barbosa RES, Issa JPM, Watanabe E, Ito IY, Albuquerque Junior RF. Use of checkerboard DNA-DNA hybridization to evaluate the internal contamination of dental implants and comparison of bacterial leakage with cast or pre-machined abutments.Clin. Oral Impl. Res. 20, 2009; 571-577.doi: 10.1111/j.1600-0501.2008.01663.x.
Resumo:
Molecular methods that permit the simultaneous detection and quantification of a large number of microbial species are currently employed in the evaluation of complex ecosystems. The checkerboard DNA-DNA hybridization technique enables the simultaneous identification of distinct bacterial. species in a large number of dental samples. The original technique employed digoxigenin-labeled whole genomic DNA probes which were detected by chemiluminescence. In this study, we present an alternative protocol for labeling and detecting whole genomic DNA probes in the Checkerboard DNA-DNA hybridization method. Whole genomic DNA was extracted from five bacterial species and labeled with fluorescein. The fluorescein labeled whole genomic DNA probes were hybridized against whole genomic DNA or subgingival plaque samples in a checkerboard hybridization format, followed by chemiluminescent detection. Our results reveal that fluorescein is a viable and adequate alternative labeling reagent to be employed in the checkerboard DNA-DNA hybridization technique. (c) 2007 Elsevier GmbH. All rights reserved.
Resumo:
We report a female child with tetrasomy of the 15q11-q13 chromosomal region, and autistic disorder associated with mental retardation, developmental problems and behavioral disorders. Combining classical and molecular cytogenetic approaches by fluorescence in situ hybridization technique, the karyotype was demonstrated as 47,XX,+mar.ish der(15)(D15Z1++,D15S11++,GABRB3++,PML-). Duplication of the 15q proximal segment represents the most consistent chromosomal abnormality reported in association with autism. The contribution of the GABA receptor subunit genes, and other genes mapped to this region, to the clinical symptoms of the disease is discussed.
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
As traffic congestion exuberates and new roadway construction is severely constrained because of limited availability of land, high cost of land acquisition, and communities' opposition to the building of major roads, new solutions have to be sought to either make roadway use more efficient or reduce travel demand. There is a general agreement that travel demand is affected by land use patterns. However, traditional aggregate four-step models, which are the prevailing modeling approach presently, assume that traffic condition will not affect people's decision on whether to make a trip or not when trip generation is estimated. Existing survey data indicate, however, that differences exist in trip rates for different geographic areas. The reasons for such differences have not been carefully studied, and the success of quantifying the influence of land use on travel demand beyond employment, households, and their characteristics has been limited to be useful to the traditional four-step models. There may be a number of reasons, such as that the representation of influence of land use on travel demand is aggregated and is not explicit and that land use variables such as density and mix and accessibility as measured by travel time and congestion have not been adequately considered. This research employs the artificial neural network technique to investigate the potential effects of land use and accessibility on trip productions. Sixty two variables that may potentially influence trip production are studied. These variables include demographic, socioeconomic, land use and accessibility variables. Different architectures of ANN models are tested. Sensitivity analysis of the models shows that land use does have an effect on trip production, so does traffic condition. The ANN models are compared with linear regression models and cross-classification models using the same data. The results show that ANN models are better than the linear regression models and cross-classification models in terms of RMSE. Future work may focus on finding a representation of traffic condition with existing network data and population data which might be available when the variables are needed to in prediction.
Resumo:
This thesis investigated the viability of using Frequency Response Functions in combination with Artificial Neural Network technique in damage assessment of building structures. The proposed approach can help overcome some of limitations associated with previously developed vibration based methods and assist in delivering more accurate and robust damage identification results. Excellent results are obtained for damage identification of the case studies proving that the proposed approach has been developed successfully.