Electronic communication equipment.

"2nd increment to MIL-HDBK-161A, 12 March 1964."

COMMAD 04 proceedings

The following topics were dealt with: semiconductor growth (MBE, PECVD, MOCVD, MOVPE) and characterizations; high-electron mobility transistors (HEMTs); microcavity organic light emitting diode (MOLED); semiconductor superlattices; photodiode arrays; MEMS structures; lithography;semiconductor lasers; semiconductor optical amplifiers; surface treatment and annealing

Role of Management Decision Variables in Determining Technology Progress and Technical Efficiency in Indian Electronic Industry

This paper analyses the influence of management on Technical Efficiency Change (TEC) and Technological Progress (TP) in the communication equipment and consumer electronics sub-sectors of Indian hardware electronics industry. Each sub-sector comprises 13 sample firms for two time periods.The primary objective is to determine the relative contribution of TP and TEC to TFP Growth (TFPG) and to establish the influence of firm specific operational management decision variables on these two components. The study finds that both the sub-sectors have strived and achieved steady TP but not TEC in the period of economic liberalisation to cope with the intensifying competition. The management decisions with respect to asset and profit utilization, vertical integration, among others, improved TP and TE in the sub-sectors. However, R&D investments and technology imports proved costly for TFP indicating inadequate efforts and/or poor resource utilisation by the management. Management was found to be complacent in terms of improving or developing their own technology as indicated by their higher dependence on import of raw materials and no influence of R&D on TP.

Sandwich nanoarchitecture of LiV3O8/graphene multilayer nanomembranes via layer-by-layer self-assembly for long-cycle-life lithium-ion battery cathodes

A lack of suitable high-performance cathode materials has become the major barrier to their applications in future advanced communication equipment and electric vehicle power systems. In this paper, we have developed a layer-by-layer self-assembly approach for fabricating a novel sandwich nanoarchitecture of multilayered LiV₃O₈ nanoparticle/graphene nanosheet (M-nLVO/GN) hybrid electrodes for potential use in high performance lithium ion batteries by using a porous Ni foam as a substrate. The prepared sandwich nanoarchitecture of M-nLVO/GN hybrid electrodes exhibited high performance as a cathode material for lithium-ion batteries, such as high reversible specific capacity (235 mA h g^-1 at a current density of 0.3 A g^-1), high coulombic efficiency (over 98%), fast rate capability (up to a current density of 10 A g^-1), and superior capacity retention during cycling (90% capacity retention with a current density of 0.3 A g^-1 after 300 cycles). Very significantly, this novel insight into the design and synthesis of sandwich nanoarchitecture would extend their application to various electrochemical energy storage devices, such as fuel cells and supercapacitors.

Gestão verde de tecnologia da informação e comunicação: fatores que influenciam a sua adoção em grandes empresas usuárias no Brasil

A crescente utilização de recursos de informática e comunicação nas empresas, visando modernização, agilidade, redução de custos e outros, tem trazido diversos benefícios, mas tem também se tornado um enorme problema para o planeta. A quantidade de lixo eletrônico (e-waste) gerada pelos equipamentos de informática e comunicação tem dobrado a cada cinco anos, se tornando um dos principais focos de atenção nos últimos anos. O volume de lixo eletrônico gerado pelo descarte de equipamentos de informática e comunicação (TIC), já ultrapassa a marca de 50 milhões de toneladas por ano, o que equivale a oito vezes a produção total de resíduos da cidade de São Paulo. O mercado brasileiro total de eletrônicos é considerado o quinto do mundo, depois da China, Estados Unidos, Japão e Rússia. A produção total de lixo eletrônico no Brasil em 2011 foi de um milhão de toneladas e a parte referente a equipamentos de TIC foi estimada em 98 mil toneladas. Frente a este contexto este estudo visa contribuir para a expansão do conhecimento na gestão verde da cadeia de suprimentos (GSCM) aplicado à realidade empresarial brasileira de TIC. Especificamente pretende-se identificar quais fatores influenciam o processo de adoção e aplicação da gestão verde de TIC, em grandes empresas usuárias de TIC no Brasil, a partir dos modelos propostos por Molla (2008) e Molla e Coopers (2008). Desta forma buscou-se responder ao seguinte problema de pesquisa: quais fatores influenciam grandes empresas usuárias de tecnologia da informação e comunicação (TIC) no Brasil na adoção de conceitos de gestão de verde? Para isto, foi realizado estudo de caso em seis grandes empresas, todas lideres em seus setores, representando grandes áreas de serviços e manufatura. Como resultado final, foi proposto um novo modelo analítico, que pareceu mais adequado ao setor de serviços. O estudo também identificou que na gestão verde de TIC empresas manufatureiras tem prioridades diferentes das de serviço. Muitas vezes seus desafios operacionais são mais críticos em relação à sustentabilidade, que a gestão verde de TIC em si. Por outro lado, o estudo dos serviços prestados pelo setor público apesar dos grandes orçamentos anuais, apontou restrições quanto aos aspectos legais e deficiência de qualificação e capacitação de seus colaboradores como fatores limitantes para a implantação de programas de gestão verde mais abrangentes.

Compact ultra-wideband planar tapered slot antenna for use in a microwave imaging system

The design of an ultra-wideband planar tapered slot antenna for use in a circular cylindrical microwave imaging system is pre-sented. The antenna was designed assuming high dielectric substrate material Rogers RT6010LM to achieve its compact size. The developed antenna element (50 X 50 mm(2)) features a 10-dB return loss bandwidth from 2.75 GHz to more than 11 GHz. The gain of the antenna is between 3.5 and 9.4 dBi over the 3-10 GHz band. The experimental tests showed that the manufactured antenna element supports transmission of narrow pulses with negligible distortions, as required in the microwave imaging system. (c) 2006 Wiley Periodicals, Inc.

Design of a compact ultra-wideband antenna

A simple method for the design of ultra-wideband antennas in planar format is presented. This method is demonstrated for a high-dielectric-constant substrate material, which allows for a considerable antenna size reduction. Simulations are performed using Ansoft's High-Frequency Structure Simulator (HFSS) for antennas assuming Du-Pont951 (epsilon(r) = 7.8) and RT6010LM (epsilon(r) = 10.2) substrates. For the 1-mm-thick DuPont951, the designed antenna with 22 X 28 nun dimensions features a 10-dB return-loss band width front 2.7 GHz to more than 15 GHz. For the 0.64-mm-thick RT6010LM a 20 X 26 nun antenna exhibits a 10-dB return loss bandwidth from 3.1 to 15 GHz. Both antennas feature nearly omnidirectional properties across the whole 10-dB return-loss bandwidth. The validity of the presented UWB antenna design strategy is confirmed by measurements performed on a prototype developed on RT6010LM substrate. (c) 2006 Wiley Periodicals, Inc.

Design of compact directive ultra wideband antipodal antenna

In this paper, a novel design procedure for designing a compact UWB antipodal Vivaldi antenna is presented. The antenna operates over the UWB frequency, band from 3.1 to more than 10.6 GHz. Its measured far-field radiation is directive and its peak gain is 10.2 dBi in the specified band. The antenna pulse response shows negligible distortion, indicating that it can be useful in a precision ranging and imaging instrumentation. (c) 2006 Wiley Periodicals, Inc.

Frequency band selection of radars for buried object detection

Choice of the operational frequency is one of the most responsible parts of any radar design process. Parameters of radars for buried object detection (BOD) are very sensitive to both carrier frequency and ranging signal bandwidth. Such radars have a specific propagation environment with a strong frequency-dependent attenuation and, as a result, short operational range. This fact dictates some features of the radar's parameters: wideband signal-to provide a high range resolution (fractions of a meter) and a low carrier frequency (tens or hundreds megahertz) for deeper penetration. The requirement to have a wideband ranging signal and low carrier frequency are partly in contradiction. As a result, low-frequency (LF) ultrawide-band (UWB) signals are used. The major goal of this paper is to examine the influence of the frequency band choice on the radar performance and develop relevant methodologies for BOD radar design and optimization. In this article, high-efficient continuous wave (CW) signals with most advanced stepped frequency (SF) modulation are considered; however, the main conclusions can be applied to any kind of ranging signals.