HG 484.65-484.80

Brown sediment with multiple domains. Grains range from small to large in size, and angular to sub-rounded in shape. Large amounts of grain crushing can be seen in the coarser domains. The sample is mainly dominated with grain crushing. The finer grained domains contain some clay rich material. Some lineations and rotation structures can also be seen throughout the different domains.

Atterberg limits of sediments from DSDP Leg 65 Holes

Atterberg limits have been determined for 32 unconsolidated sediment samples, ranging in composition from silty clay to sandy silt and recovered from four sites drilled at the mouth of the Gulf of California during DSDP Leg 65. The liquid limit of the samples ranged from 41.5% to 157.5%, and the plastic limit from 32.8% to 65.1%. The plasticity index ranged from 5.9% to 102.0%. In some samples, the water content was less than the liquid limit. The liquidity index averaged 76% while the flow and toughness indices averaged 35% and 2.18%, respectively. On the basis of these limits, the sediments analyzed can be classified as inorganic clays of high plasticity, organic clays of moderate to high plasticity, and diatomaceous sands, silts, and silty clays of low plasticity.

Grain-size distribution of sediments from DSDP Leg 65 Holes

The grain-size distribution of 223 unconsolidated sediment samples from four DSDP sites at the mouth of the Gulf of California was determined using sieve and pipette techniques. Shepard's (1954) and Inman's (1952) classification schemes were used for all samples. Most of the sediments are hemipelagic with minor turbidites of terrigenous origin. Sediment texture ranges from silty sand to silty clay. On the basis of grain-size parameters, the sediments can be divided into the following groups: (1) poorly to very poorly sorted coarse and medium sand; and (2) poorly to very poorly sorted fine to very fine sand and clay.