Non-destruct|ve testing of non-metallic materials using microwaves

The motivatitni for" the present work is from .a project sanctioned by TSRO. The work involved the development of a quick and reliable test procedure using microwaves, for tflue inspection of cured propellant samples and a method to monitor the curing conditions of propellant mix undergoing the curing process.Normal testing CHE the propellant samples involvecuttimg a piece from each carton and testing it for their tensile strength. The values are then compared with standard ones and based on this result the sample isaccepted or rejected. The tensile strength is a measure ofdegree of cure of the propellant mix. But this measurementis a destructive procedure as it involves cutting of the sample. Moreover, it does not guarantee against nonuniform curing due to power failure, hot air-line failure,operator error etc. This necessitated the need for the development of a quick and reliable non-destructive test procedure.

Report on the non-metallic minerals used in the Canadian manufacturing industries,

"No. 305."

The influence of non-metallic inclusions upon the properties of linepipe steels

The principal aim of this work was to determine the role of non-metallic inclusions in the process of hydrogen stepwise cracking (SWC). Additionally, the influence of inclusions upon the notch ductility of hydrogen charged (HC) and uncharged (UN) tensile specimens was examined. To obtain a basis for experiment a series of low carbon-manganese steels were prepared by induction melting. In order to produce variations in the composition, morphology, volume fraction, size and distribution of the inclusions the steel chemistry was adjusted prior to casting by additions of deoxidiser and Ca-Si injection. Sections of each ingot were hot rolled. Metallography, image analysis, mechanical tests and hydrogen SWC tests were then carried out. The volume fraction, morphology, and shape of inclusions influenced the tensile ductility of the steels. Marked anisotropy was found in the steels containing type II MnS inclusions at all rolling temperatures, whereas the fully Ca treated steel was isotropic. It was found that several inclusion parameters (projected length PL, mean free distance MFD, nearest-neighbour distance NND) correlated with fracture strain. An increase in inclusion volume fraction and/or the dimension of inclusions on a plane parallel to the plane of fracture led to a decrease in fracture strain. The inclusion parameters did not correlate with the fracture strains for the HC tensile specimens. However, large or clusters of inclusions acted as the principal sites for crack initiation. `Fisheyes' or areas of `flat' fracture were often found on these fracture surfaces. The criteria for SWC initiation was found to be either large inclusions or clusters of inclusions. As the PL of inclusions increased the probability of large SWCs occurring increased. SWC initiation at inclusions was believed to occur at a critical concentration of hydrogen. Factors which assisted the concentration of hydrogen at inclusions were discussed. None of the proposed mechanisms of hydrogen embrittlement could be identified as the single cause of SWC.

On the dissolution of non-metallic solid elements (sulfur, selenium, tellurium and phosphorus) in ionic liquids

Ionic liquids are shown to be good solvents for elemental sulfur, selenium, phosphorus and tellurium, and can be designed to maximise the solubility of these elements. The presence of the [S-3](center dot-) radical anion in diluted solutions of sulfur in some ionic liquids has been confirmed, and is the origin of their intense blue colour (cf. lapis lazuli).

The ability of current gas monitoring techniques to adequately detect spontaneous combustion

This paper investigates the adequacy of current gas monitoring techniques to adequately detect spontaneous combustion in underground coalmines. Despite being in the 21st century spontaneous combustion continues to occur in underground coalmines sometimes being detected only at a very advanced stage. Control of the incident is often then very expensive and time consuming. The adequacy needs to be assessed not only from the point of view of the analysis technique be it tube bundle, gas chromatograph or real time sensor but also the number, location and sampling frequency of the monitoring locations. Recommendations are made to optimise monitoring processes and recognise limitations of current techniques.

Sources of organic trace minerals in diets for weaned piglets

One hundred and twenty six piglets from a commercial genetic strain weaned at 21 days of age (6.11±0.42 kg) were used to evaluate the effects of supplementation levels of organic sources of trace minerals in the diets of weaned piglets on performance, occurrence of diarrhea, excretion of copper and zinc in the feces, and hematological parameters. A completely randomized block design was adopted, composed of six treatments (diets containing 100% of inorganic trace minerals premix at 3.00 kg/T; diets containing 0, 25, 50, 75 or 100% of organic trace minerals premix, equivalent to 0; 0.75; 1.50; 2.25 or 3.00 kg/T, respectively), seven replicates and three animals per plot. During the experimental period (from 21 to 63 days of age), the increasing levels of organic trace minerals premix in the diets determined a quadratic effect on daily weight gain (DWG), feed conversion (FC), percentage of hematocrit (Ht), hemoglobin (Hb), mean corpuscular hemoglobin (MCH), mean corpuscular volume (MCV), platelets (Pt), and a linear increase of Cu and Zn concentrations in feces. The comparison of means between the treatment with inorganic trace minerals premix and the other treatments showed that piglets fed diets without trace minerals premix had lower values of DWG, Ht, Hb, MCH, MCV, Pt and the worst FC value of piglets fed diets containing 25% of organic trace minerals premix presented lower values of Ht and Hb, in comparison with those fed diets with 100% of inorganic trace minerals premix. Inorganic trace minerals premix can be substituted by organic trace minerals premix at a lower level of inclusion in diets for weaned piglets.

Sources of organic trace minerals in diets for weaned piglets

One hundred and twenty six piglets from a commercial genetic strain weaned at 21 days of age (6.11 +/- 0.42 kg) were used to evaluate the effects of supplementation levels of organic sources of trace minerals in the diets of weaned piglets on performance, occurrence of diarrhea, excretion of copper and zinc in the feces, and hematological parameters. A completely randomized block design was adopted, composed of six treatments (diets containing 100% of inorganic trace minerals premix at 3.00 kg/T; diets containing 0, 25, 50, 75 or 100% of organic trace minerals premix, equivalent to 0; 0.75; 1.50; 2.25 or 3.00 kg/T, respectively), seven replicates and three animals per plot. During the experimental period (from 21 to 63 days of age), the increasing levels of organic trace minerals premix in the diets determined a quadratic effect on daily weight gain (DWG), feed conversion (FC), percentage of hematocrit (Ht), hemoglobin (Hb), mean corpuscular hemoglobin (MCH), mean corpuscular volume (MCV), platelets (Pt), and a linear increase of Cu and Zn concentrations in feces. The comparison of means between the treatment with inorganic trace minerals premix and the other treatments showed that piglets fed diets without trace minerals premix had lower values of DWG, Ht, Hb, MCH, MCV, Pt and the worst FC value of piglets fed diets containing 25% of organic trace minerals premix presented lower values of Ht and Hb, in comparison with those fed diets with 100% of inorganic trace minerals premix. Inorganic trace minerals premix can be substituted by organic trace minerals premix at a lower level of inclusion in diets for weaned piglets.

Los espacios mineros abandonados. El caso de la Comunidad de Madrid

La Comunidad de Madrid ha tenido un pasado minero importante que ha dejado su vestigio en el territorio. Actualmente la explotación de minerales no metálicos y de rocas industriales y ornamentales continúa, pero no así la de la minería metálica que en el pasado fue abundante. Hoy en día todas estas minas están abandonadas, dando lugar a zonas degradadas con un elevado riesgo para la seguridad de las personas y de los animales terrestres que habitan por sus inmediaciones, y necesitan ser intervenidas atendiendo, además, a su integración o recuperación ecológica y paisajística en el territorio. El principal propósito de esta tesis es conocer la situación actual que presentan las minas abandonadas de metales y proponer unos modelos de actuación para la rehabilitación e integración de los espacios mineros abandonados de la Comunidad de Madrid, cuya ventaja también estriba en su posible extrapolación a otras aéreas de gestión con una problemática similar. Partiendo de una selección de cincuenta y siete minas de interior metálicas abandonadas, se ha hecho un diagnostico en función de su seguridad (riesgo), interés cultural, arqueológico e histórico y por su afección a espacios protegidos, resultando que en todas, excepto en tres de ellas, es preciso llevar a cabo medidas protectoras y de restauración e integración en el medio ambiente. El conjunto de minas catalogadas de alto riesgo para la seguridad son veintitrés, y sobre ellas se ha realizado un Análisis Clúster, en el que además de los criterios de gestión formulados: seguridad, protección del patrimonio minero-industrial e integración ecológico-paisajística, se han incorporado otros modificadores como distancia a poblaciones, caminos, pistas y vías pecuarias, y accesibilidad. Con los resultados de este análisis se obtienen una clasificación por grupos de las minas en relación con las características intrínsecas de las explotaciones preseleccionadas y la tipología de problemas que presentan, y a partir de ella se plantean soluciones viables que se concretan en la redacción de una serie de anteproyectos tipo. Una de las principales aportaciones es que se trata de un modelo de inventariocaracterización- actuación extrapolable a otros entornos similares con problemáticas parecidas. Las propuestas de actuación que figuran en los anteproyectos tipo se proponen como medidas aplicables en situaciones similares. La tesis además también incorpora una base de datos georreferenciada que permite la localización de las explotaciones mineras abandonadas, el acceso rápido a sus características y a la propuesta de restauración correspondiente. ABSTRACT The Community of Madrid had an important mining past that left its traces in the territory. Currently the explotation of non-metallic minerals and industrial and ornamental rocks continues, but not so much with the metal deposits that were abundant in the past. Today these mines are abandoned, resulting in degraded areas with a high risk to the safety of nearby people and animals that inhabit its vicinity, and they need to be intervened, by tending to their environment integration or ecological and landscape recovery. The main objective of this thesis is to know the current situation of abandoned metal mines and propose an action model for the rehabilitation and integration of abandoned mining areas of the Community of Madrid, whose advantage also is its possible extrapolation to other management areas with similar problems. From a selection of fifty-seven abandoned metal mines, a diagnosis has been made, based on safety (risk), cultural, archaeological and historical interests and how it can be related to protected areas, resulting that all but three of them need measures of protection, restoration and integration to the environment. The set of mines that are classified as a high security risk are twenty-three, and it has been made on them an Cluster Analysis, as in addition to the management formulated criteria, such as safety, protection of mining and industrial heritage and eco-landscape integration, it has been incorporated other modifying variables, such as distance to populations, roads, tracks and livestock paths, and accessibility. With the results of this analysis, a classification of similar groups of mines in relation with the intrinsic characteristics of the preselected mines and typology problems, and from it a set of viable solutions will be specified, being then drafted on a series of proposals. One of the main contributions of this research is that it consists of an inventorycharacterization- action model, which can be extrapolated to other similar environments with similar problems. The action measures that are contained in the proposals are defined as applicable to similar situations. The thesis also incorporates a geo-referenced database that allows finding the location of abandoned mines, thus giving quick access to its features and its corresponding restoration proposal.

Fatigue in metallic alloys containing non-metallic particles

This paper examines the effects of non-metallic particles on fatigue performance and, in particular, their influence on fatigue crack propagation at high ΔK (Kmax) levels. The nature and properties of a number of common non-metallic particles found in Fe- and Al- based alloys are described, and consideration is given to the consequences of mismatch of physical and chemical properties between particle and matrix. Effects of particles on fatigue in conventional alloys are illustrated and compared with the behaviour of Al/SiCp MMC. The problems associated with developing particulate reinforced MMC with adequate fatigue crack growth resistance and toughness for structural applications are discussed. © 1991.

Annual coal and non-metallic mineral report with directories of reporting firms for .

Description based on: 1952.