Knowledge-based development for cities and societies : integrated multi-level approaches

Over the past twenty years, the conventional knowledge management approach has evolved into a strategic management approach that has found applications and opportunities outside of business, in society at large, through education, urban development, governance, and healthcare, amongst others. Knowledge-Based Development for Cities and Socieities: Integrated Multi-Level Approaches enlightens the concepts and challenges of knowledge management for both urban environments and entire regions, enhancing the expertise and knowledge of scholars, resdearchers, practitioners, managers and urban developers in the development of successful knowledge-based development policies, creation of knowledte cities and prosperous knowledge societies. This reference creates large knowledge base for scholars, managers and urban developers and increases the awareness of the role of knowledge cities and knowledge socieiteis in the knowledge era, as well as of the challenges and opportunities for future research.

Growth and Characterization of GaAs Epitaxial Layers by MOCVD

technique, on both semi-insulating and semi-conducting CraAs substrates with (100) orientation, offset by 2° towards (110) direction. Systematic variation of As/Ga was performed to gain an understanding of growth process, type of formation and other related physical properties. The films were characterized by using the variety of techniques, such as SEM, EDAX, HRTEM, XRD, and PL. Optical and electrical properties of undoped CyaAs epilayers are presented with reference to the growth conditions and AsH3/TMGa ratio. Photoluminescence measurements of GaAs epilayers were recorded at 4.2K and shows the emission of free exciton and confirmed their high purity. The dominant residual impurities in GaAs are presented by using PL. Finally, electrochemical depth profiling exhibited almost homogeneous background carrier distribution and excellent abruptness between the thin GaAs epilayer and substrate.

均相稀土催化配位聚合反应的特征与催化剂的结构及其生成机理

本文着重介绍了均相稀土配位催化剂的结构与能够产生顺式-1,4和反式-1,4双烯烃聚合物的催化剂活性中心的生成机理。

Historia de la aparición de la Sma. Virgen María de Guadalupe en México : desde el año de MDXXXIal de MDCCCXCV.

UANL

Educar para la paz y la comprensión entre los pueblos.

Pretende dar a conocer la realidad de otros pueblos y países para conseguir actitudes de comprensión, respeto y solidaridad. Las actividades se diseñan en torno a dos temas, mejorar el conocimiento de las comunidades autónomas que forman el estado español y fomentar la comprensión internacional. Entre ellas destacan la realización de mapas de las distintas comunidades, recipilación de canciones de toda España, escenificación de romances populares, intercambio de cartas con estudiantes de otros colegios y visitas a regiones cercanas a Madrid. Incluye, en anexos, textos y material elaborado por el alumnado.

Bromatological evaluation of eleven corn cultivars harvested at two cutting heights

The objective of this study was to evaluate the chemical composition and dry matter in vitro digestibility of stem, leaf, straw, cob and kernel fractions of eleven corn (Zea mays) cultivars, harvested at two cutting heights. The experiment was designed as randomized blocks, with three replicates, in a 2 × 11 factorial arrangement (eleven cultivars and two cutting heights). The corn cultivars evaluated were D 766, D 657, D 1000, P 3021, P 3041, C 805, C 333, AG 5011, FOR 01, CO 9621 and BR 205, harvested at a low cutting height (5 cm above ground) and a high cutting height (5 cm below the first ear insertion). Cutting height influenced the dry matter content of the stem fraction, which was lower (23.95%) in plants harvested at the low, than in plants harvested at the high cutting height (26.28%). The kernel fraction had the highest dry matter in vitro digestibility (85.13%), while cultivars did not differ between each other. Cob and straw were the fractions with the highest level of neutral detergent fiber (80.74 and 79.77%, respectively) and the lowest level of crude protein (3.84% and 3.69%, respectively). The leaf fraction had the highest crude protein content, both for plants of low and high cuttings (15.55% and 16.20%, respectively). The increase in the plant cutting height enhanced the dry matter content and dry matter in vitro digestibility of stem fraction, but did not affect the DM content of the leaf fraction.

New enhancement strategies for plasmon-enhanced fluorescence biosensors

This thesis investigates metallic nanostructures exhibiting surface plasmon resonance for the amplification of fluorescence signal in sandwich immunoassays. In this approach, an analyte is captured by an antibody immobilized on a plasmonic structure and detected by a subsequently bound fluorophore labeled detection antibody. The highly confined field of surface plasmons originates from collective charge oscillations which are associated with high electromagnetic field enhancements at the metal surface and allow for greatly increased fluorescence signal from the attached fluorophores. This feature allows for improving the signal-to-noise ratio in fluorescence measurements and thus advancing the sensitivity of the sensor platform. In particular, the thesis presents two plasmonic nanostructures that amplify fluorescence signal in devices that rely on epifluorescence geometry, in which the fluorophore absorbs and emits light from the same direction perpendicular to the substrate surface.rnThe first is a crossed relief gold grating that supports propagating surface plasmon polaritons (SPPs) and second, gold nanoparticles embedded in refractive index symmetric environment exhibiting collective localized surface plasmons (cLSPs). Finite-difference time-domain simulations are performed in order to design structures for the optimum amplification of established Cy5 and Alexa Fluor 647 fluorophore labels with the absorption and emission wavelengths in the red region of spectrum. The design takes into account combined effect of surface plasmon-enhanced excitation rate, directional surface plasmon-driven emission and modified quantum yield for characteristic distances in immunoassays. Homebuilt optical instruments are developed for the experimental observation of the surface plasmon mode spectrum, measurements of the angular distribution of surface plasmon-coupled fluorescence light and a setup mimicking commercial fluorescence reading systems in epifluorescence geometry.rnCrossed relief grating structures are prepared by interference lithography and multiple copies are made by UV nanoimprint lithography. The fabricated crossed diffraction gratings were utilized for sandwich immunoassay-based detection of the clinically relevant inflammation marker interleukin 6 (IL-6). The enhancement factor of the crossed grating reached EF=100 when compared to a flat gold substrate. This result is comparable to the highest reported enhancements to date, for fluorophores with relatively high intrinsic quantum yield. The measured enhancement factor excellently agrees with the predictions of the simulations and the mechanisms of the enhancement are explained in detail. Main contributions were the high electric field intensity enhancement (30-fold increase) and the directional fluorescence emission at (4-fold increase) compared to a flat gold substrate.rnCollective localized surface plasmons (cLSPs) hold potential for even stronger fluorescence enhancement of EF=1000, due to higher electric field intensity confinement. cLSPs are established by diffractive coupling of the localized surface plasmon resonance (LSPR) of metallic nanoparticles and result in a narrow resonance. Due to the narrow resonance, it is hard to overlap the cLSPs mode with the absorption and emission bands of the used fluorophore, simultaneously. Therefore, a novel two resonance structure that supports SPP and cLSP modes was proposed. It consists of a 2D array of cylindrical gold nanoparticles above a low refractive index polymer and a silver film. A structure that supports the proposed SPP and cLSP modes was prepared by employing laser interference lithography and the measured mode spectrum was compared to simulation results.rn

Acompañando e intensificando la información entrante en el explorar generativo

Los llamados procesos creativos en general, y los del proyectar arquitectónico en particular, mantienen aproximaciones hacia el objeto centradas principalmente en el procedimiento, es decir, en lo estratégico, lo metodológico o/y lo paradigmático. En ellas, además, el potencial de información no suele ser completo ni contemplado o, si lo ha sido, de manera inconciente, o referido de nuevo a lo procedimental. Igualmente, se centra el interés de estas aproximaciones, o en el objeto propuesto o resultado, o en lo procesal, pero sin atender a su constitución, es decir, a la información misma. Por tanto, y como reclama la física, la base constituyente informacional de estas aproximaciones, no ha sido considerada hasta ahora, ni se ha intentado sistematizar. Junto a esta omisión, estos acercamientos no permiten que cada humano configure de manera autónoma, independiente e íntegramente su propio proceso pues, los comentados procedimientos, están apoyados en marcos contextuales, culturales o/y procesales, reflejando así una orientación limitada en espacio-tiempo. Es así que se propone una potencia, o “aquellas cualidades poseídas por las cosas en cuya virtud éstas son totalmente impasibles o inmutables, o no se dejan cambiar fácilmente…”, según la define Aristóteles en “Metafísica”, como la posibilidad de, a la vez, aludir a un abanico informacional completo y apuntar hacia la íntegra elaboración de un proceso personal propio. Desde lo informacional, que a su vez es energético dependiendo de la disciplina científica considerada, se diferencian, en primer lugar, unos atributos o términos mínimos, que son unas potencias que compendian el abanico informacional completo. Es decir, son mínimos máximos. Estos atributos forman la fase cualitativa de la información a la que se llama acompañamiento. En segundo lugar, y apoyado tanto en el funcionamiento cerebral, en el espacio-tiempo cuántico, como en los nuevos experimentos e investigaciones de la biología, la física y la neurociencia en especial, se abren líneas nuevas para acceder a la información, antes contemplada de manera lineal, local y como entidad separada. Por ello, esta segunda aproximación presenta una potencia de intensificación de datos, que permite un aumento de los mismos en el cerebro y, por ello, la posibilidad de evitar el problema del “papel en blanco”. A esta fase se la nombra promoción. En tercer lugar, ambas fases constituyen la generación como propuesta de tesis, siendo la misma un cambio de cualquier tipo en el que alguien es agente de algo, específicamente, cuando un humano es mediador entre sucesos. Fusionando ambas, se añade simultáneamente una con-formación potencial global, que es sinérgicamente más que la suma de las dos anteriores. De esta manera agrupadora, y con objeto de materializar y sistematizar ahora esta generación o potencia, se presenta una puesta en práctica. Para ello, se desarrolla un modelo analítico-geométrico-paramétrico y se expone su aplicación en dicho caso práctico. Además, dicho modelo presenta un funcionamiento autorreferido u holográfico, reflejando tanto a los estudios científicos revisados, como al propio funcionamiento de los atributos o/y de todas las potencias que se presentan en esta investigación. ABSTRACT Generally speaking the so-called creative processes, and particularly those of the architectural design, keep approaches into the object oriented mainly in the process, so to speak, into the strategical, the methodological and/ or into the paradigmatic. In addition, they don’t usually take into account the potential of information neither in a complete manner nor even contemplated or, if considered, worked out unconsciously, or referred back to the procedural. Similarly, the interest of these approaches is focused either in the proposed object or the output, or in the processual, but leaving their constituent out, being it the information itself. Therefore, as physics is claiming nowadays, the constituent core of these approaches have neither been taken into account so far, nor tried to systematize. Along with this omission, these approaches do not allow each human being to set up autonomously, independently and entirely her/ his own process, because the mentioned procedures are supported by contextual, cultural and/ or procedural frameworks, reflecting then a perspective limited in space-time. Thus a potency is proposed, or "those qualities possessed by things under which they are totally impassive or immutable, or are not easily changed...", as defined by Aristotle in "Metaphysics", as the possibility to, and at the same time, alluding to a full informational range and point out to a whole development of an own personal process. From the informational stand, which in turn is energetic depending on the scientific discipline considered, it is distinguished, in the first place, a minimum set of attributes or terms, which are potencies that summarize the full informational range. That is, they are maximum minimums. These attributes build up the qualitative phase of the information being called accompaniment. Secondly, and supported in the brain functioning, in quantum space-time, as in new experiments and research carried out by biology, physics and neuroscience especially, new lines to access information are being opened, being contemplated linearly, locally and as a detached entity before. Thus, this second approach comes up with a potency of data`s intensifying that allows an increase in the brain thereof and, therefore, the possibility of avoiding the problem of "the blank paper". Promotion is how this phase is appointed. In the third place, both phases form the generation as the dissertation proposal, being it a change of any kind in which someone is the agent of something, specifically, when a human being is the mediator in between events. Fusing both of them, a global potential formation-with is added simultaneously, which is synergistically greater than the sum of the previous two. In this grouping way, and now in order to materialize and systemize this generation or potency, an implementation is displayed. To this end, an analytical-geometrical-parametrical model is developed and put into practice as a case study. In addition, this model features a self-referral or holographic functioning, being aligned to both scientific reviewed studies, and the very functioning either of the attributes and/ or all the potencies that are introduced in this research.