Desenvolvimento piloto de novas tipologias de fibras sintéticas

O presente trabalho, desenvolvido nas instalações da FISIPE, teve como objectivo a caracterização de fibra oxidada (FOX),actualmente em desenvolvimento, com vista ao controlo de processo e de qualidade, e centrou-se em quatro parâmetros: i. Densidade; ii. Índice de Aromaticidade; iii. Índice de Oxigénio Limitante; iv. Grupos funcionais. No estudo da densidade realizou-se: a. Consolidação do método actualmente usado na empresa, observando-se uma redução da incerteza para metade (±0,005 gcm-3). b. Análise de diferentes amostras de FOX que apresentaram valores entre 1,348-1,387 gcm-3, que atendendo à incerteza do método, se encontram dentro dos valores de referência (1,35-1,39 gcm-3). c. Previsão de densidades ao longo da etapa de estabilização oxidativa. Confirmou-se ser apenas possível pela expressão apresentada numa das fontes consultada. Para o Índice de Aromaticidade (AI) efectuou-se: a. Estudo de quatro métodos de integração de curvas de DSC para determinação do calor de combustão que permite determinar o AI. Verificou-se que o mais indicado seria o uso da temperatura de on-set como limite inferior à linha de base de integração. b. Análise de diferentes amostras de FOX, observando-se valores de AI entre os 66% e 81%. Na determinação do Índice de Oxigénio Limitante, parâmetro exclusivo de qualidade, analisaram-se amostras de cabo pela adaptação da norma ASTM D 2863-06a. Obtiveram-se valores acima dos 40%O2 para a fibra oxidada. Para a verificação dos grupos funcionais realizou-se: a. Análise de FTIR, confirmando-se o desaparecimento de grupos nitrilo em função do tempo de oxidação, e a formação de bandas conjugadas e sobrepostas, indicando a presença de estruturas ciclizadas e aromatizadas. b. Proposta de um mecanismo reaccional para a reacção de oxidação de uma determinada fibra precursora. Com o intuito de minimizar o tempo de caracterização das FOX, procurou-se ainda encontrar uma correlação entre a densidade e o Índice de Aromaticidade, tanto ao longo da etapa de oxidação, como da fibra oxidada final. Conclui-se que não é possível estabelecer uma relação matemática para as amostras analisadas.

Diagnóstico de la cadena de fibras sintéticas-ropa deportiva en El Salvador

La cadena de valor de fibras sintéticas–ropa deportiva se inserta en los sectores textil y de confección, históricamente muy relevantes en El Salvador. Esta cadena destaca por la diferenciación de sus productos y esfuerzos hacia propuestas de paquete completo y mayor valor agregado. Con una fuerte orientación al mercado externo, se ha desarrollado en un entorno favorecido por la cercanía a los Estados Unidos y por las disposiciones del DR-CAFTA (Tratado de Libre Comercio entre República Dominicana, Centroamérica y los Estados Unidos, por sus siglas en inglés), pero enfrentando un reto ante la posible ampliación del TPP (Acuerdo de Asociación Transpacífico, por sus siglas en inglés). En este marco, es relevante para El Salvador buscar el continuo fortalecimiento de esta cadena. En este diagnóstico se presentan los resultados de la aplicación de la metodología de análisis de cadenas de valor de la CEPAL. Las restricciones encontradas incluyen precios elevados de energía eléctrica, dificultad de acceso a técnicos especializados, cuestiones de consistencia y eficiencia de los pasos de frontera y procesos aduanales, falta de mayores vínculos entre la promoción de las exportaciones y la calidad y falta de algunas de las condiciones necesarias para promover más innovación. Hay oportunidades que pueden ser aprovechadas con proveedores especializados para actividades de gestión ambiental, nuevas estrategias de promoción de exportaciones, fortalecimiento de los vínculos entre los actores de la cadena y densificación del clúster productivo. Esta identificación permite la definición de propuestas de estrategias para el fortalecimiento de la cadena, potenciando el escalamiento del valor agregado de sus productos, facilitando el acceso a clientes y mercados, aprovechando el potencial del clúster productivo y promoviendo la incorporación de pequeñas y medianas empresas (PYME).

Estrategia de autoabastecimiento de energía eléctrica en empresas de la cadena de fibras sintéticas ropa deportiva de El Salvador

En el diagnóstico de la cadena de fibras sintéticas-ropa deportiva, realizado por la Comisión Económica para América Latina y el Caribe (CEPAL) en 2013, se identificó como una de las principales restricciones sistémicas al precio de la energía eléctrica. Para enfrentar dicha restricción, la CEPAL propuso como estrategia la implementación de proyectos de autoabastecimiento de energía eléctrica. De esta manera, en el presente estudio se realizó un análisis de la prefactibilidad para la puesta en marcha de este tipo de proyectos en nueve empresas que integran los eslabones de hilado, tejido y confección de la cadena.

Estudio, caracterización y validación de la fibra de la platanera para su uso como refuerzo en la conformación de piezas obtenidas a partir de procesos de transformación de plásticos

Programa de Doctorado: Ingeniería Ambiental y Desalinización

Compósitos poliméricos a base de fibras de licuri: efeitos da hibridização e do envelhecimento ambiental acelerado

The gradual replacement of conventional materials by the ones called composite materials is becoming a concern about the response of these composites against adverse environmental conditions, such as ultraviolet radiation, high temperature and moist. Also the search for new composite using natural fibers or a blend of it with synthetic fibers as reinforcement has been studied. In this sense, this research begins with a thorough study of microstructural characterization of licuri fiber, as a proposal of alternative reinforcement to polymeric composites. Thus, a study about the development of two composite laminates was done. The first one, involving only the fiber of licuri and the second comprising a hybrid composite based of fiber glass E and the fiber of licuri, in order to know the performance of the fiber when of fiber across the hybridization process. The laminates were made in the form of plates using the tereftálica ortho-polyester resin as matrix. The composite laminate made only by licuri fiber had two reinforcing fabric layers of unidirectional licuri and the hybrid composite had two reinforcing layers of unidirectional licuri fabric and three layers of fiber short glass-E mat. Finally, both laminates was exposed to aging acceleration in order to study the influence of environmental degradation involving the mechanical properties and fracture characteristics thereof. Regarding the mechanical properties of composites, these were determined through uniaxial tensile tests, uniaxial compression and three bending points for both laminates in original state, and uniaxial tensile tests and three bending points after accelerated aging. As regards the study of structural degradation due to aging of the laminates, it was carried out based on microscopic analysis and microstructure, as well as measuring weight loss. The characteristics of the fracture was performed by macroscopic and microscopic (optical and SEM) analysis. In general, the laminated composites based on fiber licuri showed some advantages in their responses to environmental aging. These advantages are observed in the behavior related to stiffness as well as the microstructural degradation and photo-oxidation processes. However, the structural integrity of this laminate was more affected in case the action of uniaxial tensile loads, where it was noted a lower rate of withholding his last resistance property

Desempenho mecânico de compósitos híbridos de fibras naturais e poliéster não saturado

With the objective to promote sustainable development, the fibres found in nature in abundance, which are biodegradable, of low cost in comparison to synthetic fibres are being used in the manufacture of composites. The mechanical behavior of the curauá and pineapple leaf fibre (PALF) composites in different proportions, 25% x 75% (P1), 50% x 50% (P2) e 75% x 25% (P3) were respectively studied, being initially treated with a 2% aqueous solution of sodium hydroxide. Mechanical analyses indicated that with respect to studies of traction, for the combination of P1 and P3, better results of 22.17 MPa and 16.98 MPa, were obtained respectively, which are higher than that of the combination P2. The results of the same pattern were obtained for analysis of bending resistance where P1 is 1.21% and P3 represents 0.96%. In the case of resistance to bending, best results were obtained for the combination P1 at 49.07 MPa. However, when Young's modulus values were calculated, the values were different to the pattern of the results of other tests, where the combination P2 with the value of 4.06 GPa is greater than the other combinations. This shows that the PALF had a greater influence in relation to curauá fibre. The analysis of the results generally shows that in combinations of two vegetable fibers of cellulosic origin, the fiber which shows higher percentage (75%) is the best option than to the composition of 50%/50%. In the meantime, according to the results obtained in this study, in the case where the application should withstand bending loads, the better composition would be 50%/50%

Desenvolvimento de um laminado compósito híbrido a base de fibras de vidro/licurí

This research work is based, in search of reinforcement s vegetable alternative to polymer composites. The idealization of making a hybrid composite reinforced with vegetable fibers licuri with synthetic fibers is a pioneer in this area. Thus was conceived a hybrid composite laminate consisting of 05 (five) layers being 03 (three) webs of synthetic fibers of glass and E-02 (two) unidirectional fabrics of vegetable fibers licuri. In the configuration of the laminate layers have alternating distribution. The composite laminate was manufactured in Tecniplas Commerce & Industry LTD, in the form of a card through the manufacturing process of hand lay up. Licuri fibers used in making the foil were the City of Mare Island in the state of Bahia. After cooking and the idealization of the hybrid composite laminate, the objective of this research work has focused on evaluating the performance of the mechanical properties (ultimate strength, stiffness and elongation at break) through uniaxial tensile tests and three point bending. Comparative studies of the mechanical properties and as well as among other types of laminated hybrid composites studied previously, were performed. Promising results were found with respect to the mechanical properties of strength and stiffness to the hybridization process idealized here. To complement the entire study were analyzed in terms of macroscopic and microscopic characteristics of the fracture for all tests.

Desenvolvimento e análise de material compósito a base de penas de frango (fibras de queratina-KF) e matriz de poliéster insaturado

Use of natural fibres as a reinforcement material in the manufacture of composites show a series of advantages: availability, biodegradability, low weight and regeneration in relation to synthetic fibres, thus justifying its utilization. In the present research work, composites were developed with chicken feathers (KF), using unsaturated polyester resin as matrix, for diversified applications, mainly in the furniture/timber industry.At present, in Brazil the chicken feathers are used as part of the animal feed, even though this material possesses low aggregated value. The chicken feathers are hollow, light and resistant. After washing with water at room temperature, a part of the chicken feathers were treated with 2% NaOH. Composites were manufactured using treated and untreated chicken feathers with unsaturated orthothalic polyester resin and 1% peroxide as catalyser, obtained in the commerce. Samples with size 150x25x3 mm for mechanical tests were cut by laser in the composite plate. Mechanical analyses were carried out in the Laboratório de Metais e Ensaios Mecânicos UFRN. All the analyses were in accordance with ASTM standards. SEM analyses were also carried out on the samples.In the analyses of the results obtained, it was observed that the composites made with untreated chicken feathers showed better results (Traction 11.406 MPa and 9.107 MPa Bending 34.947 and 20.918 MPa for samples with and without treatment respectively) compared to the composite with treated feathers. Very low values of the water absorption results, evidenced the impermeability characteristic of the feathers. From the SEM images, the structure, fracture and the fibre/matrix adsorption can be evidenced. In the flammability test, it was observed that despite the feathers having sulfur as a constituent, natural inhibitor of flame, no burning support of the composites, because the manufacturing process of the composite

Modificação superficial de fibras de juta com descarga corona para melhora da aderência com matriz poliéster

Seeking alternatives for the total or partial substitution of synthetic fibers for natural fibers, with reinforcement in polymeric materials, this work was conducted with the objective of evaluating the treatment with corona discharge on the adherence of juta fibers with resin. The fibers were exposed to corona discharge for 1, 5, 10 and 15 minutes, as well as after treatment with hot water, molding composites fiber-reinforced with filaments treated for 10 and 15 minutes, and without the treatment. The chemical structures were evaluated by spectrometry in the region of Fourier transform infrared with attenuated total reflection (FTIR/ATR), observing the formation of a new band and the increase in the absorption of groupings with oxygen. The thermal analyses, such as thermogravimetry (TG) and differential scanning calorimetry (DSC) revealed the degradation of cellulose, hemicellulose and lignin. The microstructural characterization by scanning electron microscopy (SEM) showed changes in the surface of the fiber, such as roughness, superficial depressions, surface degradation and cavity formation. The adhesion of the fibers was evaluated by the pullout test, allowing us to verify the increase in adhesion strength after treatment with corona discharge. In conclusion, the treatment with corona discharge changes the surface of the juta fibers, resulting in better adherence with the resin.

Desenvolvimento e caracterização de compósitos de fibras naturais modificadas e híbridos: fibras da coroa do abacaxi/polipropileno e fibras da coroa do abacaxi/fibras de vidro/polipropileno

The concern with the environment preservation has done with that researchers as well as industries invest in the search for materials that come from renewable sources. Natural fibers, because they are ecologically correct and have low cost, have been studied as a possible substitute, even if partial, of synthetic fibers in the development of polymeric composites. In this context, the hybrid composites (natural/synthetic) increase considerably the range of application of natural composites. The auto industry, in its constant quest for good mechanical properties materials which are developed with sustainability, has in composites with hybrid reinforcement a very viable alternative. In the present work, the nature Crown pineapple fibers and nature Crown pineapple fibers treated with alkaline solution were studied in order to evaluate the influence of chemical treatment in its properties. For this techniques were used x-ray diffractometry, Thermogravimetry and Infrared Spectroscopy (FTIR). Composites have been developed using polypropylene, reinforced with pineapple fibers and pineapple fibers hybrids/glass fibres, both with levels of 5 and 10%. These composites were analyzed by Thermogravimetry techniques and tested by traction. The realization of this work indicated that although the chemical treatment did not affect the thermal stability of the fibers, caused an increase in crystallinity index fibers and decreased its hydrophilic. The tests performed on composite indicated that the composites process was suitable because it provided good dispersion of the polymer matrix. The addition of natural fibers from the pineapple's Crown, in a proportion of 10%, provided the greatest increase in modulus of elasticity (27%) when compared to the pure polymer

Compósitos poliméricos a base de fibras de licuri: efeitos da hibridização e do envelhecimento ambiental acelerado

The gradual replacement of conventional materials by the ones called composite materials is becoming a concern about the response of these composites against adverse environmental conditions, such as ultraviolet radiation, high temperature and moist. Also the search for new composite using natural fibers or a blend of it with synthetic fibers as reinforcement has been studied. In this sense, this research begins with a thorough study of microstructural characterization of licuri fiber, as a proposal of alternative reinforcement to polymeric composites. Thus, a study about the development of two composite laminates was done. The first one, involving only the fiber of licuri and the second comprising a hybrid composite based of fiber glass E and the fiber of licuri, in order to know the performance of the fiber when of fiber across the hybridization process. The laminates were made in the form of plates using the tereftálica ortho-polyester resin as matrix. The composite laminate made only by licuri fiber had two reinforcing fabric layers of unidirectional licuri and the hybrid composite had two reinforcing layers of unidirectional licuri fabric and three layers of fiber short glass-E mat. Finally, both laminates was exposed to aging acceleration in order to study the influence of environmental degradation involving the mechanical properties and fracture characteristics thereof. Regarding the mechanical properties of composites, these were determined through uniaxial tensile tests, uniaxial compression and three bending points for both laminates in original state, and uniaxial tensile tests and three bending points after accelerated aging. As regards the study of structural degradation due to aging of the laminates, it was carried out based on microscopic analysis and microstructure, as well as measuring weight loss. The characteristics of the fracture was performed by macroscopic and microscopic (optical and SEM) analysis. In general, the laminated composites based on fiber licuri showed some advantages in their responses to environmental aging. These advantages are observed in the behavior related to stiffness as well as the microstructural degradation and photo-oxidation processes. However, the structural integrity of this laminate was more affected in case the action of uniaxial tensile loads, where it was noted a lower rate of withholding his last resistance property

E-commerce y E-marketing, un excelente modelo de negocio

El propósito de este trabajo es exponer cómo los modelos de e-Commerce & e-Marketing permiten optimizar el desempeño comercial de las empresas, aprovechando los recursos electrónicos, como la internet y los sistemas virtuales de comunicación, en este caso desde la visión que se tiene hacia el cliente. El estudio se realizó en la empresa Blue Trade S.A.S., analizando cómo la implementación de dichos modelos permitieron mejorar su desempeño, de igual manera se exponen dos modelos exitosos de optimización del recurso electrónico, como fue en Avianca y en Carvajal, S.A., quienes tuvieron en cuenta costos, estrategias y acciones a tomar para aplicarlos.

Modelo de intervención psicológica en prevención de riesgos profesionales.

Diseñar un modelo eficaz de intervención psicológica para contribuir a la prevención de los accidentes laborales. Hasta ahora los mejores resultados se han localizado en la psicometría a través de selección previa de personal.Abandonar el estudio de causas psicológicas e incidir en conseguir conductas seguras. Analizar la conducta aplicada al puesto de trabajo. Comprobar la efectividad de un análisis e intervención psicológico continuado. Dos muestras, empresa de 3200 trabajadores de fibras sintéticas: 317 empleados con 117 conductores de carretillas activos o potenciales y 14 encargados. Empresa pública de distribución de energías. Dos grupos piloto de Gavà y Sabadell, 16 operarios en el primero con edad promedio de 48,7 años y antigüedad de 23,5 años, todos varones. En Sabadell 25 operarios de 47 años de media, formación baja (igual que el anterior), antigüedad de 25 años y todos varones. Modelo factor humano-factor técnico (Sagastiberri-1974); análisis de conducta aplicado (Fitch, Hermann y Hopkins-1976); teorías del aprendizaje por conocimiento operante (Skinner-1953) y del aprendizaje social (Bandura-1966). Dos líneas base de información en evaluación de programas conductuales, es decir, observación de nivel de conducta previo (en base a estudios de Zohar-1980 y Baer, Wolf, Risley-1968 y Komaki-1980) y durante el proceso. Actividad conjunta de operarios, mandos y psicólogo para evaluar y crear una conducta segura e incentivos a la aplicación. Baterias de seguridad Bonardel-1949, Wittersheim y Schlegel-1970, Wittersheim-1980. Análisis estadísticos, cuadros, tablas, esquemas, gráficos. En el primer caso aplicación parcial y con escaso apoyo de la empresa y mandos. Se suspendió el seguimiento, sin embargo, desaparecieron los accidentes con carretillas donde antes se producían 30 por mes. La interrupción de la experiencia impide obtener evidencia empírica. En el segundo caso los resultados pasaron de un 42,7 por ciento inicial al 79,03 tras la intervención y de un 44,5 por ciento a un 59,3, ello sugiere evidencia empírica a favor de la prueba. Existen pocos psicólogos que se han interesado por la prevención de accidentes laborales y casi todos sólo desde el plano teórico. Se había marcado una línea que convertía al trabajador en portador interno o no del accidente, línea no demostrada pese a las muchas investigaciones que lo han intentado. Ese fracaso lleva a un nuevo marco teórico que plantea la relación entre el trabajador y el medio, no como el elemento endógeno anterior. Eso incide en el aprendizaje en el propio puesto de trabajo. Esa línea está en desarrollo y aunque no confirmada abre perspectivas desde los primeros resultados.

States of matter.

Sólidos, líquidos y gases son los tres estados de la materia y su estudio forma parte de la química. Este texto nos permite conocer cómo ésta se desarrolla no sólo en los laboratorios y entre científicos, sino también en fábricas y plantas químicas, y con múltiples aplicaciones: en la fabricación de fibras sintéticas para los tejidos, de explosivos para los fuegos artificiales, de disolventes para las pinturas, de fertilizantes para los cultivos y de medicamentos para tratar las enfermedades.

Metals.

El estudio de los metales y las reacciones entre ellos forma parte de la química. Este texto nos permite conocer cómo ésta se desarrolla no sólo en los laboratorios y entre científicos, sino también en fábricas y plantas químicas, y con múltiples aplicaciones: en la fabricación de fibras sintéticas para los tejidos, de explosivos para los fuegos artificiales, de disolventes para las pinturas, de fertilizantes para los cultivos y de medicamentos para tratar enfermedades.