Concentration of C2-C6 hydrocarbon gases in dry sediments of ODP Sites 180-1109 and 180-1115

Low molecular weight hydrocarbon (LMWH) distributions were examined in sediments from Sites 1109 and 1115 in the western Woodlark Basin using purge-trap thermal adsorption/desorption gas analysis. A number of different hydrocarbon components >C1, which were not detected during shipboard gas analysis, were detected at both sites using the purge-trap procedure. Concentrations of ethane, propane, and butane remained relatively low (<100 pmol/g) throughout Site 1109 and had no consistent trend with depth. In contrast, the longer-chain components increased in concentration with depth. Hexane concentrations rose to 716 pmol/g at the base of the site with a concomitant increase in both 2-methyl- and 3-methylpentane. At Site 1115, concentrations of ethane, propane, butane, and isobutylene + 1-butene remained low (<60 pmol/g) throughout the site and again had no consistent trend with depth. 2-Methylpentane, 3-methylpentane, and hexane concentrations had a subsurface maximum that coincided with sediments containing abundant plant-rich material. The LMWH downhole profiles plus low in situ temperatures suggest that the LMWH components were formed in situ by low-temperature biological processes. Purge-trap analysis has indicated the presence of some unexpected deep low-temperature bacterial reactions, which demonstrates that further analysis of LMWH may provide valuable information at future Ocean Drilling Program sites.

Ages and two-way travel times of ODP Sites 180-1109, 180-1115 and 180-1118

Synthetic seismograms are constructed from check shot-corrected velocity and density measurements collected during Ocean Drilling Program (ODP) Leg 180 at Sites 1109, 1115, and 1118. The synthetic seismograms facilitate direct correlation of a coincident multichannel seismic (MCS) profile with borehole data collected at the three sites. The MCS data and the synthetic seismograms correlate very well, with most major reflectors successfully reproduced in the synthetics. Our results enable a direct calibration of the MCS data in terms of age, paleoenvironment, and subsidence history. Seismic reflectors are time correlative within stratigraphic resolution but are often observed to result from different lithologies across strike. Our results facilitate the extrapolation of the sedimentation history into an unsampled section of Site 1118 and enable a full correlation between the three sites using all the data collected during ODP Leg 180. This study forms the foundation for regionalizing the site data to the northern margin of the Woodlark Basin, where the transition from continental rifting to seafloor spreading is taking place.

Lithologic description and vertical permeability measurements of ODP Site 180-1109

Vertical permeability testing was conducted on four samples collected from Site 1109, a borehole advanced during Ocean Drilling Program Leg 180. Closed conditions were applied during each test, and the samples were measured using a constant flow approach and permeant solutions that matched the geochemistry of nearby interstitial waters. Vertical permeabilities measured at 34.5 kPa effective stress generally decreased with depth and ranged from 10**-14 m**2 at 212.53 meters below seafloor (mbsf) to 10**-18 m**2 at 698.10 mbsf. The three deepest samples differed in permeability by less than one order of magnitude. Reconsolidation testing on the shallowest sample yielded a minimum permeability of 1.56 x 10**-16 m**2 at 276 kPa effective stress. Subsequent rebound testing yielded a hysteresis-type curve, with the final permeability measuring lower than the initial permeability by nearly 1.5 orders of magnitude. Dilution experiments indicated that use of a permeant solution matching the geochemistry of the interstitial waters may be necessary for accuracy in measurements and mitigation of clay swellage and collapse during testing, but further research is mandated.