基于特征提取的服装外形设计草图推荐技术

草图是服装外形设计中一类高效的信息载体,为了提高服装外形设计的效率,减少大量的重复操作,本文设计并实现了一种基于草图特征提取的二级推荐技术,在设计过程中整合草图轮廓的几何特征和草图勾画过程中的过程特征,同时结合相关反馈技术和用户交互历史数据,并结合笔式界面技术,开发了笔式服装外形设计原型,改善了人机交互方式,能够在用户设计过程中满足草图推荐的目的。

Influence of the abrasive particles size in the micro-abrasion wear tests of TiAlSiN thin coatings

Ball rotating micro-abrasion tribometers are commonly used to carry out wear tests on thin hard coatings. In these tests, different kinds of abrasives were used, as alumina (Al2O3), silicon carbide (SiC) or diamond. In each kind of abrasive, several particle sizes can be used. Some studies were developed in order to evaluate the influence of the abrasive particle shape in the micro-abrasion process. Nevertheless, the particle size was not well correlated with the material removed amount and wear mechanisms. In this work, slurry of SiC abrasive in distilled water was used, with three different particles size. Initial surface topography was accessed by atomic force microscopy (AFM). Coating hardness measurements were performed with a micro-hardness tester. In order to evaluate the wear behaviour, a TiAlSiN thin hard film was used. The micro-abrasion tests were carried out with some different durations. The abrasive effect of the SiC particles was observed by scanning electron microscopy (SEM) both in the films (hard material) as in the substrate (soft material), after coating perforation. Wear grooves and removed material rate were compared and discussed.