41 resultados para 11896


Relevância:

10.00% 10.00%

Publicador:

Resumo:

Co2+-doped CdSe colloidal nanowires with tunable size and dopant concentration have been prepared by a solution–liquid–solid (SLS) approach for the first time. These doped nanowires exhibit anomalous photoluminescence temperature dependence in comparison with undoped nanowires.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Thermal stability, Raman spectra and blue upconversion luminescence properties of Tm-3divided by /Yb-3divided by -codoped halide modified tellurite glasses have been Studied. The results showed that the mixed halide modified tellurite glass (TFCB) has the best thermal stability, the lowest phonon energies and the strongest upconversion emissions. The effect of halide on upconversion intensity is observed and discussed and possible upconversion mechanisms are evaluated. The intense blue upconversion luminescence of Tin (3+) in TFCB Glass may be a potentially useful material for developing upconversion optical devices.. (C) 2004 Elsevier Ltd. All rights reserved.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

GCFI and the International Conference on Tropical Oceanography held joint sessions on Nov. 17 and 18, 1965. The invited papers are listed and will be published with later sessions of the International Conference on Tropical Oceanography.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Rutherford backscattering and channeling have been used to characterize the structure of a GaN layer grown on a Si(111) substrate. The results show that a 1.26 mum GaN epitaxial layer with a rather abrupt interface and a good crystalline quality (chi(min)=3.4%) can be grown on a Si(111) substrate. Using the channeling angular scan around an off-normal <1 (2) over bar 13> axis in the {10 (1) over bar0} plane of the GaN layer, the tetragonal distortion e(T), which is caused by the elastic strain in the epilayer, can be determined. Moreover, the depth dependence of the e(T) can be obtained using this technique. A fully relaxed (e(T)=0) GaN layer for a thickness <2.8 mum is expected. (C) 2002 American Institute of Physics.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

We have demonstrated a fully covalent, signal-on E-DNA architecture based on the target-induced resolution of a DNA pseudokont. In the absence of target, the electrode-bound DNA probe adopts a pseudoknot conformation that segregates an attached methylene blue (MB) from the electrode. Upon target binding, the pseudoknot is resolved, leading to the formation of a single-stranded DNA element that supports electron transfer from the methylene blue to the electrode.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Poly(ethylene oxide) (PEO) is one of the most researched synthetic polymers due to the complex behavior which arises from the interplay of the hydrophilic and hydrophobic sites on the polymer chain. PEO in ethanol forms an opaque gel-like mixture with a partially crystalline structure. Addition of a small amount of water disrupts the gel: 5 wt % PEO in ethanol becomes a transparent solution with the addition of 4 vol % water. The phase behavior of PEO in mixed solvents have been studied using small-angle neutron scattering (SANS). PEO solutions (5 wt % PEO) which contain 4 vol % - 10 vol % (and higher) water behave as an athermal polymer solution and the phase behavior changes from UCST to LCST rapidly as the fraction of water is increased. 2 wt % PEO in water and 10 wt % PEO in ethanol/ water mixtures are examined to assess the role of hydration. The observed phase behavior is consistent with a hydration layer forming upon the addition of water as the system shifts from UCST to LCST behavior. At the molecular level, two or three water molecules can hydrate one PEO monomer (water molecules form a sheath around the PEO macromolecule) which is consistent with the suppression of crystallization and change in the mentioned phase behavior as observed by SANS. The clustering effect of aqueous PEO solution (M.W of PEO = 90,000 g/mol) is monitored as an excess scattering intensity at low-Q. Clustering intensity at Q = 0.004 Å^-1 is used for evaluating the clustering effect. The clustering intensity is proportional to the inverse temperature and levels off when the temperature is less than 50 ˚C. When the temperature is increased over 50 ˚C, the clustering intensity starts decreasing. The clustering of PEO is monitored in ethanol/ water mixtures. The clustering intensity increases as the fraction of water is increased. Based on the solvation intensity behavior, we confirmed that the ethanol/ water mixtures obey a random solvent mixing rule, whereby solvent mixtures are better at solvating the polymer that any of the two solvents. The solution behavior of PEO in ethanol was investigated in the presence of salt (CaCl2) using SANS. Binding of Ca2+ ions to the PEO oxygens transforms the neutral polymer to a weakly charged polyelectrolyte. We observed that the PEO/ethanol solution is better solvated at higher salt concentration due to the electrostatic repulsion of weakly charged monomers. The association of the Ca2+ ions with the PEO oxygen atoms transforms the neutral polymer to a weakly charged polyelectrolyte and gives rise to repulsive interactions between the PEO/Ca2+ complexes. Addition of salt disrupts the gel, which is consistent with better solvation as the salt concentration is increased. Moreover, SANS shows that the phase behavior of PEO/ethanol changes from UCST to LCST as the salt concentration is increased.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Se han estudiado las comunidades de la alianza Homalothecio-Polypodion serrati en las montañas de la región valenciana y alrededores, encontrándose que las mismas pueden atribuirse a cuatro asociaciones: Anomodonto-Polypodietum serrati, Saxifragetum cossonianae, Saxifragetum latepetiolatae y Homalothecio-Asplenietum fontianae.Se presentan sendas tablas fitosociológicas de cada una de las tres últimas, de las cuales se comentan, asimismo, sus principales notas características.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

5-exo Cyclisation of vinyl-, aryl- and alkyl-radicals onto the aryl group of arylcarboxamides is followed by beta-scission of the resulting spirocyclohexadienyl radicals with ejection of a carbamoyl radical. The fate of this radical depends on the substrate but, in the cases studied, either 5-endo cyclisation or direct reduction follows to give phthalimides, biaryls or beta-arylethylamines.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Este librito quiere ser memoria del II Encuentro ecuménico de teólogos del tercer mundo, realizado en la Paz-Bolivia, organizado por ASETT. Recoge unos documentos o testimonios de la teología india de Abya-Yala (América)

Relevância:

10.00% 10.00%

Publicador:

Resumo:

A Work Project, presented as part of the requirements for the Award of a Masters Degree in Management from the NOVA – School of Business and Economics

Relevância:

10.00% 10.00%

Publicador:

Resumo:

1917/03/12 (Numéro 11896).

Relevância:

10.00% 10.00%

Publicador:

Resumo:

UANL

Relevância:

10.00% 10.00%

Publicador:

Resumo:

La littérature abordant les enjeux socio-éthiques et réglementaires associés aux médicaments est relativement abondante, ce qui n’est pas le cas des dispositifs médicaux (DM). Ce dernier secteur couvre une très large diversité de produits qui servent à de multiples applications: diagnostic, traitement, gestion des symptômes de certaines conditions physiques ou psychiatriques, restauration d’une fonction débilitante, chirurgie, etc. À tort, on a tendance à croire que les DM sont réglementés de la même manière que les médicaments, que ce soit pour les exigences concernant leur mise en marché ou des pratiques de surveillance après mise en marché. Or, au cours des dernières années, leur usage élargi, leur impact sur les coûts des soins de santé, et les rappels majeurs dont certains ont fait l’objet ont commencé à inquiéter la communauté médicale et de nombreux chercheurs. Ils interpellent les autorités réglementaires à exercer une plus grande vigilance tant au niveau de l’évaluation des nouveaux DM à risque élevé avant leur mise en marché, que dans les pratiques de surveillance après mise en marché. Une stratégie plus rigoureuse d’évaluation des nouveaux DM permettrait d’assurer un meilleur suivi des risques associés à leur utilisation, de saisir la portée des divers enjeux socio-éthiques découlant de l’utilisation de certains DM, et de préserver la confiance du public. D’emblée, il faut savoir que les autorités nationales n’ont pas pour mandat d’évaluer la portée des enjeux socio-éthiques, ou encore les coûts des DM qui font l’objet d’une demande de mise en marché. Cette évaluation est essentiellement basée sur une analyse des rapports risques-bénéfices générés par l’usage du DM pour une indication donnée. L’évaluation des impacts socio-éthiques et l’analyse coûts-bénéfices relèvent des agences d’Évaluation des technologies de santé (ÉTS). Notre recherche montre que les DM sont non seulement peu fréquemment évalués par les agences d’ÉTS, mais l’examen des enjeux socio-éthiques est trop souvent encore incomplet. En fait, les recommandations des rapports d’ÉTS sont surtout fondées sur une analyse coûts-bénéfices. Or, le secteur des DM à risque élevé est particulièrement problématique. Plusieurs sont non seulement porteurs de risques pour les patients, mais leur utilisation élargie comporte des impacts importants pour les systèmes de santé. Nous croyons que le Principisme, au cœur de l’éthique biomédicale, que ce soit au plan de l’éthique de la recherche que de l’éthique clinique, constitue un outil pour faciliter la reconnaissance et l’examen, particulièrement par les agences d’ÉTS, des enjeux socio-éthiques en jeu au niveau des DM à risque élevé. Également, le Principe de Précaution pourrait aussi servir d’outil, particulièrement au sein des agences nationales de réglementation, pour mieux cerner, reconnaître, analyser et gérer les risques associés à l’évaluation et l’utilisation de ce type de DM. Le Principisme et le Principe de Précaution pourraient servir de repères 1) pour définir les mesures nécessaires pour éliminer les lacunes observées dans pratiques associées aux processus de réglementation, et 2) pour mieux cerner et documenter les enjeux socio-éthiques spécifiques aux DM à risque élevé.