Redução aluminotérmica do óxido de tântalo usando uma tocha de plasma como ignitor

In this work was used a plasma torch of non transferred arc with argon as work gas, using a power supply with maximum DC current of 250 A and voltage of 30 V to activate the plasma and keep it switched on. The flame temperature was characterized by optical emission spectroscopy, through Boltzmann-plot-method. The torch has been used like igniter in the aluminothermic reduction of the mixture tantalum oxide and aluminum, seeking to obtain metallic tantalum. In heating of the reagents only one particle will be considered to study interactions between plasma-particle, seeking to determinate its fusion and residence time. The early powders were characterized by laser granulometry, scanning electron microscopy (SEM) and X-ray diffraction analysis. The final product of this reaction was characterized by SEM and X-ray diffraction. Crystallite size was calculated by the Scherrer equation and microdeformation was determined using Willamsom-Hall graph. With Rietveld method was possible to quantify the percentile in weight of the products obtained in the aluminothermic reaction. Semi-quantitative chemical analysis (EDS) confirmed the presence of metallic tantalum and Al2O3 as products of the reduction. As was waited the particle size of the metallic tantalum produced, presents values in nanometric scale due the short cooling time of those particles during the process

Redução aluminotérmica do óxido de tântalo usando uma tocha de plasma como ignitor

In this work was used a plasma torch of non transferred arc with argon as work gas, using a power supply with maximum DC current of 250 A and voltage of 30 V to activate the plasma and keep it switched on. The flame temperature was characterized by optical emission spectroscopy, through Boltzmann-plot-method. The torch has been used like igniter in the aluminothermic reduction of the mixture tantalum oxide and aluminum, seeking to obtain metallic tantalum. In heating of the reagents only one particle will be considered to study interactions between plasma-particle, seeking to determinate its fusion and residence time. The early powders were characterized by laser granulometry, scanning electron microscopy (SEM) and X-ray diffraction analysis. The final product of this reaction was characterized by SEM and X-ray diffraction. Crystallite size was calculated by the Scherrer equation and microdeformation was determined using Willamsom-Hall graph. With Rietveld method was possible to quantify the percentile in weight of the products obtained in the aluminothermic reaction. Semi-quantitative chemical analysis (EDS) confirmed the presence of metallic tantalum and Al2O3 as products of the reduction. As was waited the particle size of the metallic tantalum produced, presents values in nanometric scale due the short cooling time of those particles during the process

Obtenção de pós de tântalo metálico a partir da redução aluminotérmica com ignição a plasma

Metallic tantalum has a high commercial value due to intrinsic properties like excellent ductility, corrosion resistance, high melt and boiling points and good electrical and thermal conductivities. Nowadays, it is mostly used in the manufacture of capacitors, due to excellent dielectric properties of its oxides. In the nature, tantalum occurs in the form of oxide and it is extracted mainly from tantalite-columbite ores. The tantalum is usually produced by the reduction of its oxide, using reductants like carbon, silicon, calcium, magnesium and aluminum. Among these techniques, the aluminothermic reduction has been used as the industrial method to produce niobium, tantalum and their alloys, due to the easy removal of the Al and Al2O3 of the system, easing further refining. In conventional aluminothermic reduction an electrical resistance is used to trigger the reaction. This reaction self-propagates for all the volume of material. In this work, we have developed a novel technique of aluminothermic reduction that uses the hydrogen plasma to trigger the reaction. The results obtained by XRD, SEM and EDS show that is possible to obtain a compound rich in tantalum through this technique of aluminothermic reduction in the plasma reactor

Obtenção de pós de tântalo metálico a partir da redução aluminotérmica com ignição a plasma

Metallic tantalum has a high commercial value due to intrinsic properties like excellent ductility, corrosion resistance, high melt and boiling points and good electrical and thermal conductivities. Nowadays, it is mostly used in the manufacture of capacitors, due to excellent dielectric properties of its oxides. In the nature, tantalum occurs in the form of oxide and it is extracted mainly from tantalite-columbite ores. The tantalum is usually produced by the reduction of its oxide, using reductants like carbon, silicon, calcium, magnesium and aluminum. Among these techniques, the aluminothermic reduction has been used as the industrial method to produce niobium, tantalum and their alloys, due to the easy removal of the Al and Al2O3 of the system, easing further refining. In conventional aluminothermic reduction an electrical resistance is used to trigger the reaction. This reaction self-propagates for all the volume of material. In this work, we have developed a novel technique of aluminothermic reduction that uses the hydrogen plasma to trigger the reaction. The results obtained by XRD, SEM and EDS show that is possible to obtain a compound rich in tantalum through this technique of aluminothermic reduction in the plasma reactor

Revestimentos a base de Ta/Al2O3 produzidos por aspersão térmica sobre substrato metálico

Metal substrates were coated by thermal spraying plasma torch, they were positioned at a distance of 4 and 5 cm from the nozzle exit of the plasma jet. The starting materials were used for deposition of tantalum oxide powder and aluminium. These two materials were mixed and ground into high-energy mill, then immersed in the torch for the production of alumina coating infused with particles of tantalum with nano and micrometric size. The spraying equipment used is a plasma torch arc not transferred, which operating in the range of 250 A and 80 V, was able to produce enough heat to ignite aluminothermic between Ta2O5 and aluminum. Upon reaching the plasma jet, the mixing powders react with the heat of the blaze, which provides sufficient energy for melting aluminum particles. This energy is transferred through mechanisms of self-propagating to the oxide, beginning a reduction reaction, which then hits on the surface of the substrate and forms a coating on which a composite is formed by a junction metal - ceramic (Ta +Al2O3). The phases and quantification of each were obtained respectively by X-ray diffraction and the Rietveld method. Morphology by scanning electron microscopy and chemical analysis by energy dispersive spectroscopy EDS. It was also performed measurements of the substrate roughness, Vickers microhardness measurements in sprays and determination of the electron temperature of the plasma jet by optical emission spectroscopy EEO. The results confirmed the expectation generated around the end product of spraying the mixture Ta2O5 + Al, both in the formation of nano-sized particles and in their final form. The electron excitation temperature was consistent with the purpose of work, in addition, the thermodynamic temperature was efficient for the reduction process of Ta2O5. The electron excitation temperature showed values of 3000, 4500 and 8000 K for flows10, 20 and 30 l / min respectively, these values were taken at the nozzle exit of the plasma jet. The thermodynamic temperature around 1200 ° C, was effective in the reduction process of Ta2O5

Estudo sobre a redução aluminotérmica de Ta2O5 e TiO2 usando descarga de cátodo oco

In this study it was used two metallic oxides, Ta2O5 and TiO2, in order to obtain metallic powders of Ta and Ti through aluminothermic reduction ignited by plasma. Ta2O5 and TiO2 powders were mixed with Al in a planetary mill, using different milling times. A thermal analysis study (DTA and TG) was carried out, in order to know the temperature to react both the mixtures. Then, these mixtures were submitted to a hollow cathode discharge, where they were reacted using aluminothermic reduction ignited by plasma. The product obtained was characterized by XRD and SEM, where it was proven the possibility of producing these metallic particles, different from the conventional process, where metallic ingots are obtained. It was verified that the aluminothermic reduction ignited by plasma is able to produce metallic powders of Ta and Ti, and a higher efficiency was observed to the process with Ta2O5-Al mixtures. Among different microstructural aspects observed, it can be noted the presence of metallic nanoparticles trapped into an Al2O3 matrix, besides acicular structures (titanium) and dendritic structures (tantalum), which are a product characteristic from a fast cooling

Functional alkali tantalate 2D structures for microelectronics and related applications

Alkali tantalates and niobates, including K(Ta / Nb)O3, Li(Ta / Nb)O3 and Na(Ta / Nb)O3, are a very promising ferroic family of lead-free compounds with perovskite-like structures. Their versatile properties make them potentially interesting for current and future application in microelectronics, photocatalysis, energy and biomedics. Among them potassium tantalate, KTaO3 (KTO), has been raising interest as an alternative for the well-known strontium titanate, SrTiO3 (STO). KTO is a perovskite oxide with a quantum paraelectric behaviour when electrically stimulated and a highly polarizable lattice, giving opportunity to tailor its properties via external or internal stimuli. However problems related with the fabrication of either bulk or 2D nanostructures makes KTO not yet a viable alternative to STO. Within this context and to contribute scientifically to the leverage tantalate based compounds applications, the main goals of this thesis are: i) to produce and characterise thin films of alkali tantalates by chemical solution deposition on rigid Si based substrates, at reduced temperatures to be compatible with Si technology, ii) to fulfil scientific knowledge gaps in these relevant functional materials related to their energetics and ii) to exploit alternative applications for alkali tantalates, as photocatalysis. In what concerns the synthesis attention was given to the understanding of the phase formation in potassium tantalate synthesized via distinct routes, to control the crystallization of desired perovskite structure and to avoid low temperature pyrochlore or K-deficient phases. The phase formation process in alkali tantalates is far from being deeply analysed, as in the case of Pb-containing perovskites, therefore the work was initially focused on the process-phase relationship to identify the driving forces responsible to regulate the synthesis. Comparison of phase formation paths in conventional solid-state reaction and sol-gel method was conducted. The structural analyses revealed that intermediate pyrochlore K2Ta2O6 structure is not formed at any stage of the reaction using conventional solid-state reaction. On the other hand in the solution based processes, as alkoxide-based route, the crystallization of the perovskite occurs through the intermediate pyrochlore phase; at low temperatures pyrochlore is dominant and it is transformed to perovskite at >800 °C. The kinetic analysis carried out by using Johnson-MehlAvrami-Kolmogorow model and quantitative X-ray diffraction (XRD) demonstrated that in sol-gel derived powders the crystallization occurs in two stages: i) at early stage of the reaction dominated by primary nucleation, the mechanism is phase-boundary controlled, and ii) at the second stage the low value of Avrami exponent, n ~ 0.3, does not follow any reported category, thus not permitting an easy identification of the mechanism. Then, in collaboration with Prof. Alexandra Navrotsky group from the University of California at Davis (USA), thermodynamic studies were conducted, using high temperature oxide melt solution calorimetry. The enthalpies of formation of three structures: pyrochlore, perovskite and tetragonal tungsten bronze K6Ta10.8O30 (TTB) were calculated. The enthalpies of formation from corresponding oxides, ∆Hfox, for KTaO3, KTa2.2O6 and K6Ta10.8O30 are -203.63 ± 2.84 kJ/mol, - 358.02 ± 3.74 kJ/mol, and -1252.34 ± 10.10 kJ/mol, respectively, whereas from elements, ∆Hfel, for KTaO3, KTa2.2O6 and K6Ta10.8O30 are -1408.96 ± 3.73 kJ/mol, -2790.82 ± 6.06 kJ/mol, and -13393.04 ± 31.15 kJ/mol, respectively. The possible decomposition reactions of K-deficient KTa2.2O6 pyrochlore to KTaO3 perovskite and Ta2O5 (reaction 1) or to TTB K6Ta10.8O30 and Ta2O5 (reaction 2) were proposed, and the enthalpies were calculated to be 308.79 ± 4.41 kJ/mol and 895.79 ± 8.64 kJ/mol for reaction 1 and reaction 2, respectively. The reactions are strongly endothermic, indicating that these decompositions are energetically unfavourable, since it is unlikely that any entropy term could override such a large positive enthalpy. The energetic studies prove that pyrochlore is energetically more stable phase than perovskite at low temperature. Thus, the local order of the amorphous precipitates drives the crystallization into the most favourable structure that is the pyrochlore one with similar local organization; the distance between nearest neighbours in the amorphous or short-range ordered phase is very close to that in pyrochlore. Taking into account the stoichiometric deviation in KTO system, the selection of the most appropriate fabrication / deposition technique in thin films technology is a key issue, especially concerning complex ferroelectric oxides. Chemical solution deposition has been widely reported as a processing method to growth KTO thin films, but classical alkoxide route allows to crystallize perovskite phase at temperatures >800 °C, while the temperature endurance of platinized Si wafers is ~700 °C. Therefore, alternative diol-based routes, with distinct potassium carboxylate precursors, was developed aiming to stabilize the precursor solution, to avoid using toxic solvents and to decrease the crystallization temperature of the perovskite phase. Studies on powders revealed that in the case of KTOac (solution based on potassium acetate), a mixture of perovskite and pyrochlore phases is detected at temperature as low as 450 °C, and gradual transformation into monophasic perovskite structure occurs as temperature increases up to 750 °C, however the desired monophasic KTaO3 perovskite phase is not achieved. In the case of KTOacac (solution with potassium acetylacetonate), a broad peak is detected at temperatures <650 °C, characteristic of amorphous structures, while at higher temperatures diffraction lines from pyrochlore and perovskite phases are visible and a monophasic perovskite KTaO3 is formed at >700 °C. Infrared analysis indicated that the differences are due to a strong deformation of the carbonate-based structures upon heating. A series of thin films of alkali tantalates were spin-coated onto Si-based substrates using diol-based routes. Interestingly, monophasic perovskite KTaO3 films deposited using KTOacac solution were obtained at temperature as low as 650 °C; films were annealed in rapid thermal furnace in oxygen atmosphere for 5 min with heating rate 30 °C/sec. Other compositions of the tantalum based system as LiTaO3 (LTO) and NaTaO3 (NTO), were successfully derived as well, onto Si substrates at 650 °C as well. The ferroelectric character of LTO at room temperature was proved. Some of dielectric properties of KTO could not be measured in parallel capacitor configuration due to either substrate-film or filmelectrode interfaces. Thus, further studies have to be conducted to overcome this issue. Application-oriented studies have also been conducted; two case studies: i) photocatalytic activity of alkali tantalates and niobates for decomposition of pollutant, and ii) bioactivity of alkali tantalate ferroelectric films as functional coatings for bone regeneration. Much attention has been recently paid to develop new type of photocatalytic materials, and tantalum and niobium oxide based compositions have demonstrated to be active photocatalysts for water splitting due to high potential of the conduction bands. Thus, various powders of alkali tantalates and niobates families were tested as catalysts for methylene blue degradation. Results showed promising activities for some of the tested compounds, and KNbO3 is the most active among them, reaching over 50 % degradation of the dye after 7 h under UVA exposure. However further modifications of powders can improve the performance. In the context of bone regeneration, it is important to have platforms that with appropriate stimuli can support the attachment and direct the growth, proliferation and differentiation of the cells. In lieu of this here we exploited an alternative strategy for bone implants or repairs, based on charged mediating signals for bone regeneration. This strategy includes coating metallic 316L-type stainless steel (316L-SST) substrates with charged, functionalized via electrical charging or UV-light irradiation, ferroelectric LiTaO3 layers. It was demonstrated that the formation of surface calcium phosphates and protein adsorption is considerably enhanced for 316L-SST functionalized ferroelectric coatings. Our approach can be viewed as a set of guidelines for the development of platforms electrically functionalized that can stimulate tissue regeneration promoting direct integration of the implant in the host tissue by bone ingrowth and, hence contributing ultimately to reduce implant failure.

Revestimentos a base de Ta/Al2O3 produzidos por aspersão térmica sobre substrato metálico

Metal substrates were coated by thermal spraying plasma torch, they were positioned at a distance of 4 and 5 cm from the nozzle exit of the plasma jet. The starting materials were used for deposition of tantalum oxide powder and aluminium. These two materials were mixed and ground into high-energy mill, then immersed in the torch for the production of alumina coating infused with particles of tantalum with nano and micrometric size. The spraying equipment used is a plasma torch arc not transferred, which operating in the range of 250 A and 80 V, was able to produce enough heat to ignite aluminothermic between Ta2O5 and aluminum. Upon reaching the plasma jet, the mixing powders react with the heat of the blaze, which provides sufficient energy for melting aluminum particles. This energy is transferred through mechanisms of self-propagating to the oxide, beginning a reduction reaction, which then hits on the surface of the substrate and forms a coating on which a composite is formed by a junction metal - ceramic (Ta +Al2O3). The phases and quantification of each were obtained respectively by X-ray diffraction and the Rietveld method. Morphology by scanning electron microscopy and chemical analysis by energy dispersive spectroscopy EDS. It was also performed measurements of the substrate roughness, Vickers microhardness measurements in sprays and determination of the electron temperature of the plasma jet by optical emission spectroscopy EEO. The results confirmed the expectation generated around the end product of spraying the mixture Ta2O5 + Al, both in the formation of nano-sized particles and in their final form. The electron excitation temperature was consistent with the purpose of work, in addition, the thermodynamic temperature was efficient for the reduction process of Ta2O5. The electron excitation temperature showed values of 3000, 4500 and 8000 K for flows10, 20 and 30 l / min respectively, these values were taken at the nozzle exit of the plasma jet. The thermodynamic temperature around 1200 ° C, was effective in the reduction process of Ta2O5

Estudo sobre a redução aluminotérmica de Ta2O5 e TiO2 usando descarga de cátodo oco

In this study it was used two metallic oxides, Ta2O5 and TiO2, in order to obtain metallic powders of Ta and Ti through aluminothermic reduction ignited by plasma. Ta2O5 and TiO2 powders were mixed with Al in a planetary mill, using different milling times. A thermal analysis study (DTA and TG) was carried out, in order to know the temperature to react both the mixtures. Then, these mixtures were submitted to a hollow cathode discharge, where they were reacted using aluminothermic reduction ignited by plasma. The product obtained was characterized by XRD and SEM, where it was proven the possibility of producing these metallic particles, different from the conventional process, where metallic ingots are obtained. It was verified that the aluminothermic reduction ignited by plasma is able to produce metallic powders of Ta and Ti, and a higher efficiency was observed to the process with Ta2O5-Al mixtures. Among different microstructural aspects observed, it can be noted the presence of metallic nanoparticles trapped into an Al2O3 matrix, besides acicular structures (titanium) and dendritic structures (tantalum), which are a product characteristic from a fast cooling

Síntese e caracterização de TaC e óxido misto de tântalo e cobre nanoestruturados a partir do precursor oxálico de tântalo através de reações gás-sólido e sólido-sólido a baixa temperatura

The research and development of nanostructured materials have been growing significantly in the last years. These materials have properties that were significantly modified as compared to conventional materials due to the extremely small dimensions of the crystallites. The tantalum carbide (TaC) is an extremely hard material that has high hardness, high melting point, high chemical stability, good resistance to chemical attack and thermal shock and excellent resistance to oxidation and corrosion. The Compounds of Tantalum impregnated with copper also have excellent dielectric and magnetic properties. Therefore, this study aimed to obtain TaC and mixed tantalum oxide and nanostructured copper from the precursor of tris (oxalate) hydrate ammonium oxitantalato, through gas-solid reaction and solid-solid respectively at low temperature (1000 ° C) and short reaction time. The materials obtained were characterized by X-ray diffraction (XRD), Rietveld refinement, Scanning Electron Microscopy (SEM), Spectroscopy X-Ray Fluorescence (XRF), infrared spectroscopy (IR), thermogravimetric (TG), thermal analysis (DTA) and BET. Through the XRD analyses and the Reitiveld refinement of the TaC with S = 1.1584, we observed the formation of pure tantalum carbide and cubic structure with average crystallite size on the order of 12.5 nanometers. From the synthesis made of mixed oxide of tantalum and copper were formed two distinct phases: CuTa10O26 and Ta2O5, although the latter has been formed in lesser amounts

Síntese e caracterização de TaC e óxido misto de tântalo e cobre nanoestruturados a partir do precursor oxálico de tântalo através de reações gás-sólido e sólido-sólido a baixa temperatura

The research and development of nanostructured materials have been growing significantly in the last years. These materials have properties that were significantly modified as compared to conventional materials due to the extremely small dimensions of the crystallites. The tantalum carbide (TaC) is an extremely hard material that has high hardness, high melting point, high chemical stability, good resistance to chemical attack and thermal shock and excellent resistance to oxidation and corrosion. The Compounds of Tantalum impregnated with copper also have excellent dielectric and magnetic properties. Therefore, this study aimed to obtain TaC and mixed tantalum oxide and nanostructured copper from the precursor of tris (oxalate) hydrate ammonium oxitantalato, through gas-solid reaction and solid-solid respectively at low temperature (1000 ° C) and short reaction time. The materials obtained were characterized by X-ray diffraction (XRD), Rietveld refinement, Scanning Electron Microscopy (SEM), Spectroscopy X-Ray Fluorescence (XRF), infrared spectroscopy (IR), thermogravimetric (TG), thermal analysis (DTA) and BET. Through the XRD analyses and the Reitiveld refinement of the TaC with S = 1.1584, we observed the formation of pure tantalum carbide and cubic structure with average crystallite size on the order of 12.5 nanometers. From the synthesis made of mixed oxide of tantalum and copper were formed two distinct phases: CuTa10O26 and Ta2O5, although the latter has been formed in lesser amounts

Desarrollo de procesos hidrometalúrgicos para la fabricación de compuestos de zinc a parir de óxido Waelz

309 p.

A via L-arginina-óxido nítrico em plaquetas de adolescente com obesidade e síndrome metabólica

A prevalência da obesidade e da síndrome metabólica (SM) vem aumentando dramaticamente em jovens e está se tornando um problema de saúde pública na maioria dos países desenvolvidos e em desenvolvimento. Tanto a obesidade quanto a SM aumentam o número de pacientes expostos ao risco de doença cardiovascular. Estudos recentes mostram que uma redução na biodisponipilidade de óxido nítrico (NO) é um dos principais fatores que contribui para a ação deletéria da insulina nos vasos de pacientes adultos com obesidade e SM. O NO, potente vasodilatador e anti-agregante plaquetário, tem como precursor o aminoácido catiônico L-arginina que é transportado para o interior das plaquetas através do carreador y+L. Uma família de enzimas denominadas NO sintases (NOS) catalisa a oxidação da L-arginina em NO e L-citrulina e é composta de três isoformas: neuronal (nNOS), induzível (iNOS) e endotelial (eNOS). Os objetivos principais do presente estudo são de investigar diferentes etapas da via L-arginina-NO em plaquetas associando agregação plaquetária, concentração plasmática de L-arginina, estresse oxidativo, marcadores metabólicos, hormonais, clínicos e inflamatórios em pacientes adolescentes com obesidade e SM. Foram incluídos no estudo trinta adolescentes, sendo dez com obesidade, dez com SM, e dez controles saudáveis pareados por idade, sexo e classificação de Tanner (controles: n= 10, 15.6 0.7 anos; obesos: n= 10, 15 0.9 anos; SM: n= 10, 14.9 0.8 anos). O transporte de L-arginina (pmol/109céls/min) através do sistema y+L estava diminuído nos pacientes com SM (18.4 3.8) e obesidade (20.8 4.7), comparados aos controles (52.3 14.8). Houve uma correlação positiva do influxo de L-arginina via sistema y+L com os níveis de HDL-Colesterol. Por outro lado, foi encontrada uma correlação negativa do influxo de L-arginina com os níveis de insulina, os índices Homa IR, relacionado a RI, Homa Beta, relacionado a função da célula beta e também com os índices de Leptina. Em relação a produção de NO, a obesidade e a SM não afetaram a atividade e expressão das enzimas NOS. A atividade da superóxido dismutase (SOD), através da mensuração da inibição da auto-oxidação da adrenalina, mostrou diferença significativa nas plaquetas de pacientes com obesidade (4235 613,2 nMol/mg de proteína), quando comparada aos controles (1011 123,6 nmol/mg de proteína) e SM (1713 267,7 nmol/mg de proteína). A nível sistêmico, foi também evidenciada uma ativação desta enzima anti-oxidante no soro de pacientes obesos, em relação aos controles. A peroxidação lipídica avaliada pelas substâncias reativas ao ácido tiobarbitúrico (TBARS) estava inalterada no soro dos pacientes e controles. Estes resultados sugerem que o transporte de L-arginina diminuído nas plaquetas de adolescentes obesos e com SM pode ser um marcador precoce de disfunção plaquetária. A alteração desta via correlaciona-se com a resistência à insulina e hiperinsulinemia. A contribuição deste estudo e de fatores que possam ser precocemente identificados pode diminuir o risco cardiovascular na vida adulta desta população de pacientes.

A via L-arginina-óxido nítrico no transtorno depressivo e sua associação com a função plaquetária e o estresse oxidativo

O transtorno depressivo (TD) é um fator de risco cardiovascular independente que apresenta elevada morbi-mortalidade. Recentes evidências sugerem a participação do óxido nítrico (NO), potente vasodilatador e anti-agregante plaquetário, na patogênese de doenças cardiovasculares e psiquiátricas. A síntese do NO ocorre através da conversão do aminoácido L-arginina em L-citrulina e NO, pela ação da enzima NO sintase (NOS). Esta tese aborda o papel da via L-arginina-NO em plaquetas de pacientes com TD e sua associação com a função plaquetária e estresse oxidativo. Para análise comportamental da depressão em modelo animal, foi utilizado o modelo de estresse pós-natal de separação única (SMU). Os animais foram divididos em quatro grupos para a realização do estudo: Grupo Controle Sedentário (GCS), Grupo Controle Exercício (GCE), Grupo SMU Sedentário (SMUS) e Grupo SMU Exercício (SMUE). O treinamento físico (TF) dos animais englobou 8 semanas, com duração de 30 minutos e uma velocidade de treinamento estabelecida pelo teste máximo (TE). Para o estudo em humanos, 10 pacientes com TD com score Hamilton: 201, (média de idade: 384anos), foram pareados com 10 indivíduos saudáveis (média de idade: 383anos). Os estudos em humanos e animais foram aprovados pelos Comitês de Ética: 1436 - CEP/HUPE e CEUA/047/2010, respectivamente. Foi mensurado em humanos e em animais: transporte de L-arginina, concentração GMPc, atividade das enzimas NOS e superóxido dismutase (SOD) em plaquetas e cortisol sistêmico. Experimentos realizados somente em humanos: expressão das enzimas NOS, arginase e guanilato ciclase através de Western Blotting. A agregação plaquetária foi induzida por colágeno e foi realizada análise sistêmica de proteína C-reativa, fibrinogênio e L-arginina. Para o tratamento estatístico utilizou-se três testes estatísticos para avaliar as diferenças das curvas de sobrevida: Kaplan-Meier, e os testes de Tarone-Ware e Peto-Prentice. Em humanos, houve uma redução do transporte de L-arginina, da atividade das enzimas NOS e SOD, e da concentração de GMPc em plaquetas, e nas concentrações plasmáticas de L-arginina no grupo com TD em relação ao grupo controle. Foi observado um aumento dos níveis plasmáticos de fibrinogênio no TD. Esses resultados demonstram uma inibição da via L-arginina-NO-GMPc e da enzima anti-oxidante SOD em pacientes com TD sem afetar a função plaquetária. Em relação ao TF, para o modelo animal, foram encontradas alterações iniciais quanto à distância percorrida e tempo de execução do TE entre os grupos controles e o grupos SMUs, apresentando estes últimos menores valores para o TE. Após 8 semanas de TF, verificou-se um maior influxo no transporte de L-arginina para o SMUE em comparação ao grupo SMUS. As diferenças observadas para o tempo e a distância percorrida no TE inicial entre os grupos controle e no modelo de estresse foram revertidas após as 8 semanas de TF, demonstrando o efeito benéfico do exercício físico na capacidade cardiorespiratória em modelos de depressão.

Efeitos de diferentes dietas hiperlipídicas na via L-arginina-óxido nítrico e no stress oxidativo em eritrócitos de camundongos C57BL/6

Introdução: o óxido nítrico (NO) é um gás inorgânico com uma meia-vida curta e tem um papel crítico na manutenção da homeostase vascular e fluidez sanguínea. O NO é sintetizado a partir do aminoácido L-arginina por uma família de enzimas NO sintases (NOS). Estudos têm mostrado que eritrócitos expressam NOS endotelial (eNOS) funcional, que serve como uma fonte de NO intraluminal. Além disso, eritrócitos participam da defesa antioxidante removendo os radicais livres e prevenindo o dano oxidativo às membranas biológicas e a destruição do NO. Dietas hiperlípidicas estão associadas a um risco aumentado de doença cardiovacular e síndrome metabólica, mas os exatos mecanismos não estão completamente esclarecidos. O objetivo deste estudo foi investigar os efeitos de diferentes dietas hiperlípidicas na via L-arginina-NO e o estresse oxidativo em eritrócitos de camundongos. Metodologia: camundongos machos C57BL/6 de três meses de idade receberam diferentes dietas por 10 semanas: dieta normolipídica ou dieta hiperlipídica contendo banha de porco (HB), óleo de oliva (HO), óleo de girassol (HG) ou óleo de canola (HC). Foram analisados o transporte de L-arginina mediado pelos transportadores catiônicos y+ e y+L, a atividade da NOS, a expressão da eNOS e da NOS induzível (iNOS), a formação de substâncias reativas ao ácido tiobarbitúrico (TBARS) e a atividade das enzimas antioxidantes catalase (CAT) e superóxido dismutase (SOD). Resultados: o transporte total de L-arginina estava aumentado no grupo HO em comparação aos controles e aos outros grupos com dieta hiperlipídica. Quando o transporte foi fracionado, o sistema y+ estava mais ativado no grupo HO em relação aos controles e outros grupos que receberam dieta hiperlipídica. O transporte de L-arginina via sistema y+L estava maior nos grupos HO, HG e HC comparados aos grupos controle e HB. Adicionalmente, a atividade basal da NOS e a expressão de eNOS estavam aumentadas em eritrócitos independente do tipo de dieta hiperlípidica insaturada. Observou-se uma maior expressão da iNOS no grupo HO comparado ao controle. Em contraste, o grupo HB apresentou uma inibição da via L-arginina-NO. A análise da peroxidação lipídica, através da formação de TBARS, e da atividade da enzima antioxidante CAT não revelou diferenças entre os grupos, ao contrário do grupo HO, que induziu uma ativação de outra enzima antioxidante, a SOD. Conclusões: o presente estudo proporciona a primeira evidência de que os sistemas y+ e y+L regulam o transporte aumentado de L-arginina em eritrócitos de camundongos do grupo HO. Além disso, todas as dietas hiperlipídicas insaturadas induzem um aumento da atividade basal da NOS associada a uma expressão elevada da eNOS. É possível que diferentes mudanças na composição lipídica da membrana plasmática induzidas pelas dietas possam afetar transportadores e enzimas nos eritrócitos. Além disso, a inibição da via L-arginina-NO no grupo HB pode contribuir para o desenvolvimento da aterosclerose, enquanto dietas hiperlipídicas insaturadas podem ter um efeito protetor via aumento da geração de NO.