Óxido de cálcio e Lactobacillus buchneri NCIMB 40788 na ensilagem de cana-de-açúcar in natura ou queimada

Objetivou-se avaliar os efeitos da inclusão de óxido de cálcio (CaO) e/ou L. buchneri (LB) sobre as perdas e alterações químicas de silagens de cana-de-açúcar in natura ou queimada. Foram avaliadas silagens de cana-de-açúcar in natura ou queimada produzidas sem aditivo; com Lactobacillus buchneri; com óxido de cálcio equivalente 1% da matéria natural; ou com a associação do L. buchneri e do óxido de cálcio. O delineamento experimental utilizado foi o inteiramente casualizado em esquema fatorial (2 × 4), considerando fatores a queima (presença ou ausência) e o uso de aditivos (L. buchneri, óxido de cálcio e sua associação), cada um avaliado com três repetições. O óxido de cálcio foi mais eficiente em reduzir a variação no teor de matéria seca tanto nas silagens de cana-de-açúcar in natura quanto na queimada. Nas silagens de cana-de-açúcar sem aditivos, maiores recuperações de matéria seca foram observadas quando a ensilagem foi feita com cana in natura (63,5%) em comparação à cana queimada (46,8%). Todavia, quando utilizados aditivos, não houve diferenças entre as silagens de cana-de-açúcar in natura e queimada. A presença de óxido de cálcio foi o fator que promoveu maior diferença entre as silagens. O óxido de cálcio é eficiente em reduzir as perdas e as alterações químicas na ensilagem de cana-de-açúcar, tanto in natura quanto queimada. O L. buchneri atua eficientemente em silagens de cana-de-açúcar queimada. Silagens de cana-de-açúcar queimada são mais propensas às perdas que as de cana-de-açúcar in natura.

Óxido de cálcio como aditivo na ensilagem de cana-de-açúcar

Foram avaliados os efeitos do óxido de cálcio aplicado no momento da ensilagem nas doses de 0,5; 1 e 2% sobre a composição química de silagens de cana-de-açúcar durante a fermentação e pós-abertura. Antes da ensilagem, doses crescentes de óxido promoveram redução dos teores de FDN, FDA e lignina e aumento da hemicelulose e da digestibilidade in vitro da matéria seca (DIVMS). No momento da abertura dos silos, os teores de FDN e FDA foram superiores aos observados antes da ensilagem e menores nas silagens com doses mais altas de aditivo. Nesta mesma fase, quanto maior o nível do aditivo maior a DIVMS. do momento da abertura ao 3º dia, não houve alteração significativa nos teores de PB, FDN, FDA, lignina e hemicelulose ou na DIVMS. O teor de FDN das silagens controle e com 0,5% de aditivo aumentou do 3º ao 6º dia. Silagens com 0,5% de cal tiveram aumento do teor de FDN também do 6c ao 9ºdia, enquanto, nas silagens com 1% de cal, esse aumento ocorreu do 3º ao 9º dia e, nas silagens com 2%, não houve alteração após abertura. Na silagem com 2% de óxido de cálcio, a maior recuperação de matéria seca digestível verdadeira e de CNF ocorreu na ensilagem e, naquelas com 1 e 2% de aditivo, após a abertura do silo. A adição de cal virgem reduziu o teor de FDN das silagens em todos os momentos e manteve o teor de FDN mais estável após abertura.

Terminação de cordeiros com cana-de-açúcar in natura ou hidrolisada com óxido de cálcio em ambientes aeróbico e anaeróbico

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Ensilagem da cana-de-açúcar in natura ou queimada e aditivada ou não com óxido de cálcio

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Consumo e desempenho de ovinos alimentados com silagens de cana-de-açúcar tratadas com óxido de cálcio e cloreto de sódio

The intake and performance of lambs fed with sugarcane silages treated with whitewash and chloride sodium were evaluated. Seven treatments were used: untreated silage (control); silages treated with 0.5; 1.0 and 1.5% of CaO (whitewash); and silages treated with 0.5; 1.0 and 2.0% of NaCl, with four replicates per treatment. The animals were fed a higher amount of dry matter and total digestible nutrients when the sugarcane silages were treated with 0.5% of NaCl, 1.0 and 1.5% of CaO. The intake of neutral detergent fiber and crude protein increased when the lambs were fed silages treated with 0.5% of NaCl and 1.0% of CaO. The average daily gain did not differ among treatments. The inclusion of 0.5% of sodium chloride and 1.0% of whitewash in sugarcane silages increased the intake and improved the performance of lambs.

Propriedades físicas, químicas, antimicrobianas e biológicas de cimentos endodônticos com óxido de cálcio e resina salicilato

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Efeitos no solo do gesso produzido em diferentes reações químicas da solução de ácido sulfúrico reciclada com carbonato de cálcio residual e óxido de cálcio.

2011

Influência da adição de cálcio nas propriedades de pastas geopoliméricas destinadas a cimentação de poços de petróleo

Nowadays, the search for new technologies that are able to follow the upcoming challenges in oil industry is a constant. Always trying properties improvements of the used materials, looking for the best performance and greater life time. Besides the search for technologies that show an improvement of performance, the search for materials environmentally correct along the whole production process. In Oil well cementing, this search for new technologies passes through the development of slurry systems that support these requests and that are also environmentally friendly. In this context, the use of geopolymer slurries is a great alternative route to cementing oil wells. Besides having good properties, comparable to Portland cement slurries, this alternative material releases much less CO2 gas in the production of their root materials when compared the production of Portland cement, which releases tons of CO2. In order to improve the properties of geopolymer slurries has been added Calcium Oxide, as observed in other studies that slurries where the Calcium is present the values of compressive strength is greater. The addition has been realized based in the CaO/SiO2 molar ratio of 0.05, 0.10 and 0.15. Have been performed compressive strength tests, thickening time, rheology and fliud loss control test of the slurries, following NBR 9831, as well as the physical chemical characterization of XRD, SEM and TG. Has been observed in most of the tests the slurries follow a tendency until the ratio of 0.10, which inverses in the ratio 0.15. This behavior can be explained by two phenomena that occur simultaneously, the first one is the break of the polymer chains and a consequent increase in molucules mobility, which prevails until the ratio of 0.1, and the second is possible approach of the chains due to the capacity of the calcium ions stabilize the charges of two different aluminum. There is only one linearity in the mechanical behavior that can be attributed to the appereance of the C-S-H phase. Based on this, it is concluded that the phenomenon of breaking the polymer chains predominates until the ratio of 0.1, causing an increase of the filtrate volume, lower rheological parameters and increasing thickening time. From the ratio of 0.15 the approach of the chains predominates, and the behavior is reversed

Determinação do teor de cálcio através da termogravimetria, em medicamentos utilizados no tratamento da osteoporose: um estudo comparativo

The present study utilized the thermogravimetry (TG) and optical emission spectroscopy with inductively coupled plasma - ICP / OES to determine the calcium content in tablets of carbonate, citrate and calcium lactate used in the treatment of osteoporosis. The samples were characterized by IR, SEM, TG / DTG, DTA, DSC and XRD. The thermal analysis evaluated the thermal stability and physical-chemical events and showed that the excipients influence the decomposition of active ingredients. The results of thermogravimetry indicated that the decomposition temperature of the active CaCO3 (T = 630.2 °C) is lower compared to that obtained in samples of the tablets (633.4 to 655.2 °C) except for sample AM 2 (Ti = 613.8 oC). In 500.0 °C in the samples of citrate and calcium lactate, as well as their respective active principles had already been formed calcium carbonate. The use of N2 atmosphere resulted in shifting the initial and final temperature related to the decomposition of CaCO3. In the DTA and DSC curves were observed endo and exothermic events for the samples of tablets and active ingredients studied. The infrared spectra identified the main functional groups in all samples of active ingredients, excipients and tablets studied, such as symmetric and asymmetric stretches of the groups OH, CH, C = O. Analysis by X-ray diffraction showed that all samples are crystalline and that the final residue showed peaks indicative of the presence of calcium hydroxide by the reaction of calcium oxide with moisture of the air. Although the samples AM 1, AM 2, AM 3 and AM 6 in their formulations have TiO2 and SiO2 peaks were not observed in X-ray diffractograms of these compounds. The results obtained by TGA to determine the calcium content of the drugs studied were satisfactory when compared with those obtained by ICP-OES. In the AM 1 tablet was obtained the content of 35.37% and 32.62% for TG by ICP-OES, at 6 AM a percentage of 17.77% and 16.82% and for AM 7 results obtained were 8.93% for both techniques, showing that the thermogravimetry can be used to determine the percentage of calcium in tablets. The technique offers speed, economy in the use of samples and procedures eliminating the use of acid reagents in the process of the sample and efficiency results.

Avaliação do potencial de uso agrícola da fluorita com óxido silício (AgroSiCa), derivado da fabricação de fertilizantes fosfatados

Phosphate fertilizers are critical for crop production in tropical soils, which are known for having high phosphate-fixing capacity and aluminium saturation, as well as low pH and calcium contents. Fluorine is a component of many phosphate rocks used to make phosphate fertilizers, via a process that generates hexafluorosilicic acid (H2SiF6). While many treatment technologies have been proposed for removal of fluorine in industrial facilities, little attention has been given to a process of neutralizing H2SiF6 with calcium oxide aiming to find out an alternative and sustainable use of a by-product with a great potential for beneficial use in tropical agriculture. This study evaluated the effect of a by-product of phosphoric acid production (fluorite with silicon oxide, hereafter called AgroSiCa) in levels of phosphorus (P), calcium (Ca), silicon (Si), aluminum (Al) and fluorine (F) and some others parameters in soils as on growth of soybean and corn. Experiments were conducted in a greenhouse condition at the Federal University of Lavras (UFLA), Lavras, Minas Gerais, using different types of soils in tropical regions and different doses of AgroSiCa. The application of AgroSiCa resulted in a slight increase in soil pH and significant increases in calcium, phosphorus and silicon in the soil solution and the shoots of corn and soybeans. We also found very low levels of fluoride in all soil leachates. A significant reduction of labile aluminum levels found in all soils after the cultivation of corn and soybeans. In sum, AgroSiCa improved soil properties and contributed to better growth of both cultures. In sum, AgroSiCa improved soil properties and contributed to a better growth of both crops. Our results show that reacting H2SiF6 derived from the wet-process phosphoric acid production with calcium oxide leads to a by-product with potential for agricultural use, especially when applied in highly-weathered soils. Besides providing calcium and silicon to plants, the use of such by-product in soils with high phosphate-fixing capacity and high aluminium saturation delivers additional benefits, since fluoride and silicon can play an important role in improving soil conditions due to the formation of less plant-toxic forms of aluminium, as well as upon decreasing phosphate fixation, thus improving root development and making fertilizer-derived phosphate more available for plant growth.

Utilização de resíduo de mármore e de óxido de boro em escórias sintéticas dessulfurantes para aços.

O mercado atual exige das indústrias siderúrgicas aços de melhor qualidade produzidos por meio de processos que causem menor impacto ao meio ambiente. Dessa forma, este trabalho teve como objetivo reciclar o resíduo de mármore gerado na indústria de rochas ornamentais, que possui em sua composição óxido de cálcio (CaO) e óxido de magnésio (MgO). O CaO é suficiente para substituir a cal nas escórias e o MgO contribui para a diminuição do desgaste dos refratários, através do emprego do resíduo no processo produtivo do aço. Além disso, foi realizada a substituição da fluorita por óxido de boro como fluxante na composição de misturas dessulfurantes. O resíduo de mármore foi caracterizado utilizando as seguintes técnicas: análise química via EDXFR, análise granulométrica via espalhamento de luz, área de superfície específica pelo método BET, difração de raios-X, microscopia eletrônica de varredura (MEV) e análise de micro-regiões por EDS. Visando verificar a eficiência na dessulfuração, foram formuladas misturas sintéticas utilizando a cal convencional ou resíduo de mármore, e a fluorita ou o óxido de boro. As misturas foram formuladas com o auxílio dos programas de termodinâmica computacional, Thermo-Calc e FactSage. Estas misturas foram adicionadas no aço fundido a temperatura de 1600°C sob atmosfera de argônio e agitadas por meio de um rotor de alumina. Amostras de metal foram retiradas para verificar a variação do teor de enxofre durante o experimento. O resíduo de mármore caracterizado, apresentou em sua composição 40% de CaO e 14% de MgO, na forma dos carbonatos CaCO3 e MgCO3. Obteve uma perda de massa de 42,1%, na forma de CO2 a temperatura de 780°C. Os experimentos mostraram que, as misturas testadas apresentaram, na maioria dos casos, eficiência de dessulfuração acima de 60%.

Influência da adição de cálcio nas propriedades de pastas geopoliméricas destinadas a cimentação de poços de petróleo

Nowadays, the search for new technologies that are able to follow the upcoming challenges in oil industry is a constant. Always trying properties improvements of the used materials, looking for the best performance and greater life time. Besides the search for technologies that show an improvement of performance, the search for materials environmentally correct along the whole production process. In Oil well cementing, this search for new technologies passes through the development of slurry systems that support these requests and that are also environmentally friendly. In this context, the use of geopolymer slurries is a great alternative route to cementing oil wells. Besides having good properties, comparable to Portland cement slurries, this alternative material releases much less CO2 gas in the production of their root materials when compared the production of Portland cement, which releases tons of CO2. In order to improve the properties of geopolymer slurries has been added Calcium Oxide, as observed in other studies that slurries where the Calcium is present the values of compressive strength is greater. The addition has been realized based in the CaO/SiO2 molar ratio of 0.05, 0.10 and 0.15. Have been performed compressive strength tests, thickening time, rheology and fliud loss control test of the slurries, following NBR 9831, as well as the physical chemical characterization of XRD, SEM and TG. Has been observed in most of the tests the slurries follow a tendency until the ratio of 0.10, which inverses in the ratio 0.15. This behavior can be explained by two phenomena that occur simultaneously, the first one is the break of the polymer chains and a consequent increase in molucules mobility, which prevails until the ratio of 0.1, and the second is possible approach of the chains due to the capacity of the calcium ions stabilize the charges of two different aluminum. There is only one linearity in the mechanical behavior that can be attributed to the appereance of the C-S-H phase. Based on this, it is concluded that the phenomenon of breaking the polymer chains predominates until the ratio of 0.1, causing an increase of the filtrate volume, lower rheological parameters and increasing thickening time. From the ratio of 0.15 the approach of the chains predominates, and the behavior is reversed

Bio-synthesis of nanosized semiconductors using mine wastes as material sources

This work describes the synthesis of nanosized metal sulfides and respective SiO2 and/or TiO2 composites in high yield via a straightforward process, under ambient conditions (temperature and pressure), by adding to aqueous metals a nutrient solution containing biologically generated sulfide from sulfate-reducing bacteria (SRB). The nanoparticles‘ (NPs) morphological properties were shown not to be markedly altered by the SRB growth media composition neither by the presence of bacterial cells. We further extended the work carried out, using the effluent of a bioremediation system previously established. The process results in the synthesis of added value products obtained from metal rich effluents, such as Acid Mine Drainage (AMD), when associated with the bioremediation process. Precipitation of metals using sulfide allows for the possibility of selective recovery, as different metal sulfides possess different solubilities. We have evaluated the selective precipitation of CuS, ZnS and FeS as nanosized metal sulfides. Again, we have also tested the precipitation of these metal sulfides in the presence of support structures, such as SiO2. Studies were carried out using both artificial and real solutions in a continuous bioremediation system. We found that this method allowed for a highly selective precipitation of copper and a lower selectivity in the precipitation of zinc and iron, though all metals were efficiently removed (>93% removal). This research has also demonstrated the potential of ZnS-TiO2 nanocomposites as catalysts in the photodegradation of organic pollutants using the cationic dye, Safranin-T, as a model contaminant. The influence of the catalyst amount, initial pH and dye concentration were also evaluated. Finally, the efficiency of the precipitates as catalysts in sunlight mediated photodegradation was investigated, using different volumes of dye-contaminated water (150 mL and 10 L). This work demonstrates that all tested composites have the potential to be used as photocatalysts for the degradation of Safranin-T.

Estudo de sistemas vítreos para infiltração em alumina

The system in-Ceram Alumina, produced by VITA, consists in a technique of prepare of a substructure of ceramics to dental crowns. First burning is made in the alumina decanted by slip casting process under a stone die that reproduces the tooth prepared to receive a crown. In a second burning, alumina is infiltrated by vitreous system, giving to this set a high mechanic resistance. In this work, it s made a study of the composition of a new infiltrating material more used nowadays, giving to alumina desirable mechanics proprieties to its using like substructure of support to ceramic s crown used in the market today. The addition of Lanthanum oxide (frit A) and calcium oxide (frit B) was made in attempt to increase the viscosity of LZSA and to reduce fusion temperature. The frits were put over samples of alumina and took to the tubular oven to 1400ºC under vacuum for two groups (groups 1 and 2). For another two groups (groups 3 and 4) it was made a second infiltration, following the same parameters of the first. A fifth group was utilized like group of control where the samples of pure alumina were not submitted to any infiltrating process. Glasses manifested efficient both in quality and results of analysis of mechanic resistance, being perfectly compatible with oral environment in this technical requisite. The groups that made a second infiltration had he best results of fracture toughness, qualify the use in the oral cavity in this technical question. The average of results achieved for mechanic resistance to groups 1, 2, 3, 4 and 5 were respectively 98 MPa, 90 MPa, 144 MPa, 236 MPa and 23 MPa

Estabilidade aeróbia, pH e dinâmica de desenvolvimento de microrganismos da cana-de-açúcar in natura hidrolisada com cal virgem

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)