984 resultados para ,Thermoplastic extrusion and its features.
Resumo:
Starve feeding of single screw extruder was described as an important means of improving the performance characteristics of the extruder. In addition to such improvement with versatility, the starve feeding technique also may affect the mechanical properties of the extrudate since the heat transfer an(l mixing characteristics in the starve fed and Hood fed extruders are not the same. Since the material is more loosely packed in the channels of the starve fed extruder, there may be greater bed mobility and uniformity. Further, the. thermal an(l shear induced degradation are also less since possibilities of developing local high temperatures are less compared to a densely compacted extruder bed. This study has been undertaken mainly to explore the effect of feeding rate on the mechanical properties of rubber and plastic extrudates since the effect of feeding rate has not been analysed from this angle so far.
Resumo:
Using a laboratory impact tester, impacts were applied to fruits of different varieties of apples and pears. The response to impact was analized, and many parameters were recorded, to be correlated to bruise susceptibility and to ripeness changes. Different methods for the detection and evaluation of the bruised Area and its features were studied, using direct observation and various reactives. Different types of bruises were established.
Resumo:
ABSTRACTINTRODUCTION:The aim of this study was quantify annexin A1 expression in macrophages and cluster of differentiation 4 (CD4) + and cluster of differentiation 8 (CD8)+ T cells from the skin of patients with cutaneous leishmaniasis (n=55) and correlate with histopathological aspects.METHODS:Infecting species were identified by polymerase chain reaction-restriction fragment length polymorphism, and expression of annexin A1 was analyzed by immunofluorescence.RESULTS:All patients (n = 55) were infected with Leishmania braziliensis . Annexin A1 was expressed more abundantly in CD163 + macrophages in infected skin (p < 0.0001) than in uninfected skin. In addition, macrophages in necrotic exudative reaction lesions expressed annexin A1 at higher levels than those observed in granulomatous (p < 0.01) and cellular lesions p < 0.05). This difference might be due to the need to clear both parasites and necrotic tissue from necrotic lesions. CD4 + cells in cellular lesions expressed annexin A1 more abundantly than did those in necrotic (p < 0.05) and granulomatous lesions (p < 0.01). Expression in CD8 + T cells followed the same trend. These differences might be due to the pervasiveness of lymphohistiocytic and plasmacytic infiltrate in cellular lesions.CONCLUSIONS:Annexin A1 is differentially expressed in CD163 + macrophages and T cells depending on the histopathological features of Leishmania -infected skin, which might affect cell activation.
Resumo:
We examined strains of Trypanosoma cruzi isolated from patients with acute Chagas disease that had been acquired by oral transmission in the state of Santa Catarina, Brazil (2005) and two isolates that had been obtained from a marsupial (Didelphis aurita) and a vector (Triatoma tibiamaculata). These strains were characterised through their biological behaviour and isoenzymic profiles and genotyped according to the new Taxonomy Consensus (2009) based on the discrete typing unities, that is, T. cruzi genotypes I-VI. All strains exhibited the biological behaviour of biodeme type II. In six isolates, late peaks of parasitaemia, beyond the 20th day, suggested a double infection with biodemes II + III. Isoenzymes revealed Z2 or mixed Z1 and Z2 profiles. Genotyping was performed using three polymorphic genes (cytochrome oxidase II, spliced leader intergenic region and 24Sα rRNA) and the restriction fragment length polymorphism of the kDNA minicircles. Based on these markers, all but four isolates were characterised as T. cruzi II genotypes. Four mixed populations were identified: SC90, SC93 and SC97 (T. cruzi I + T. cruzi II) and SC95 (T. cruzi I + T. cruzi VI). Comparison of the results obtained by different methods was essential for the correct identification of the mixed populations and major lineages involved indicating that characterisation by different methods can provide new insights into the relationship between phenotypic and genotypic aspects of parasite behaviour.
Resumo:
Data concerning the relationship between hepatitis B virus (HBV) genotypes and liver histology are scarce. The aim of this study was to compare HBV non-B and non-C genotypes according to demographic features, clinical status, HBV-DNA levels and liver histology in Rio de Janeiro. One hundred twenty one consecutive chronic HBV-infected patients were enrolled during two-year period and data were prospectively collected. Sera were tested for HBV genotyping using restriction fragment length polymorphism. Liver biopsy was obtained from patients with either increased alanine aminotransferase (ALT) or HBV-DNA levels. Genotype A was the most common, found in 82 (68%) patients, followed by F in 19 (15%), D in 17 (14%), B in one (1%) and C in two (2%). There was no association between HBV genotypes A, D and F and gender (p = 0.37), age (p = 0.78), race (p = 0.22), mode of infection (p = 0.94), HB "e" antigen status (p = 0.37) and HBV-DNA levels (p = 0.47). The ALT levels were lower in genotype D (75%) compared with A (47%) and F (55%) (p = 0.05). Liver biopsy showed lower inflammation [histological activity index (HAI) = 4] and fibrosis (F) (= 0) scores in genotype D than in genotypes A (HAI = 5, p < 0.001; F = 2, p = 0.008) or F (HAI = 5, p = 0.009; F = 2, p = 0.01). Genotype A was the most prevalent in chronic HBV-infected patients and genotype D patients presented with less intense liver disease.
Resumo:
Although Brazil is a country of tradition in both the production and consumption of coffee, the most of the coffee is consumed as a beverage, which reduces greatly the competitiveness on international market, for reducing the chances of supplying the product under other forms of consumption. Owing to that, the aim of this study was developing a precooked mixed flour containing coffee powder and rice for use in coffee flavored products. Mixtures of rice and coffee in the proportions of 900:100, 850:150 and 800:200 g, respectively, were processed in a single screw extruder (Brabender DS-20, Duisburg, German) and the effect of the extrusion process on the variables moisture content (16%, 18% and 20%) and temperature in the third extruding zone (140 °C, 160 °C and 180 °C) was studied. The results for expansion index ranged from 2.91 to 11.11 mm in diameter; the water absorption index from 4.59 to 6.33 g gel/g sample and the water solubility index varied from 4.05% to 8.57%. These results showed that, despite coffee powder influenced the variables studied, the expanded product after milling resulted in a extruded mixture with good absorption and water solubility indices, which favors the use of the precooked mixed flour for human consumption.
Resumo:
This paper presents the major characteristics of the Institut Pierre Simon Laplace (IPSL) coupled ocean–atmosphere general circulation model. The model components and the coupling methodology are described, as well as the main characteristics of the climatology and interannual variability. The model results of the standard version used for IPCC climate projections, and for intercomparison projects like the Paleoclimate Modeling Intercomparison Project (PMIP 2) are compared to those with a higher resolution in the atmosphere. A focus on the North Atlantic and on the tropics is used to address the impact of the atmosphere resolution on processes and feedbacks. In the North Atlantic, the resolution change leads to an improved representation of the storm-tracks and the North Atlantic oscillation. The better representation of the wind structure increases the northward salt transports, the deep-water formation and the Atlantic meridional overturning circulation. In the tropics, the ocean–atmosphere dynamical coupling, or Bjerknes feedback, improves with the resolution. The amplitude of ENSO (El Niño-Southern oscillation) consequently increases, as the damping processes are left unchanged.
Resumo:
In order to understand diets, why and how they change and can be influenced, it is important to understand how food choices are made. The has been the subject of, considerable study within many of the social science disciplines and the humanities. The paper draws on the theoretical and empirical work of psychologists, sociologists, economists, market researchers, anthropologists, geographers and historians to understand better the forces behind food choice, derive some general empirical messages from the literature, to shed light on food choice in a European context and to address the question of whether there is, or has been, a recognisably Atlantic diet. The paper proceeds to analyse the characteristics of the food consumption patterns in the Atlantic diet countries, examines whether their food consumption patterns are homogenous (i.e. similar across the countries of this group), whether they are specific (i.e. different from the ones in other country groups) and finally evaluates the nutritional composition of the Atlantic diet against the WHO/FAO recommendations for a healthy and wholesome diet.
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
Ethylene-vinyl acetate copolymer (EVA) with 19% of vinyl acetate and its derivatives modified by hydrolysis of 50 and 100% of the initial vinyl acetate groups were used to produce blends with thermoplastic starch (TPS) plasticized with 30 wt% glycerol. The blends were characterized by Fourier transform infrared spectroscopy, scanning electron microscopy. X-ray diffraction, water absorption, stress-strain mechanical tests, dynamic mechanical analysis and thermogravimetric analysis. In contrast to the blends with unmodified EVA. those made with hydrolyzed EVA were compatible, as demonstrated by the brittle fracture surface analysis and the results of thermal and mechanical tests. The mechanical characteristics and water absorption of the TPS were improved even with a small addition (2.5 wt%) of hydrolyzed EVA. The glass transition temperature rose with the degree of hydrolysis of EVA by 40 and 50 degrees, for the EVA with 50 and 100% hydrolysis, respectively. The addition of hydrolyzed EVA proved to be an interesting approach to improving TPS properties, even when very small quantities were used, such as 2.5 wt%. (C) 2012 Elsevier Ltd. All rights reserved.
Resumo:
The coronary collateral circulation provides an alternative source of blood supply to myocardium jeopardised by ischaemia. Collaterals enlarge with obstructive coronary artery disease to allow bulk flow, but blood flow deliverable by the native, pre-formed collateral extent can already be sizeable. Genetic determinants contribute significantly to the wide variability observed in both native collateral extent and its capacity to enlarge, and the severity of the coronary stenosis is the most significant environmental determinant for collateral enlargement. The protective effect of a well-developed coronary collateral circulation translates into relevant improvements in all-cause and cardiac mortality in the acute and chronic phases of coronary artery disease, as well as into a reduction of future adverse cardiovascular events.
Resumo:
Acetyl-CoA carboxylase, which has a molecular mass of 265 kDa (ACC-alpha), catalyzes the rate-limiting step in the biosynthesis of long-chain fatty acids. In this study we report the complete amino acid sequence and unique features of an isoform of ACC with a molecular mass of 275 kDa (ACC-beta), which is primarily expressed in heart and skeletal muscles. In these tissues, ACC-beta may be involved in the regulation of fatty acid oxidation, rather than fatty acid biosynthesis. ACC-beta contains an amino acid sequence at the N terminus which is about 200 amino acids long and may be uniquely related to the role of ACC-beta in controlling carnitine palmitoyltransferase I activity and fatty acid oxidation by mitochondria. If we exclude this unique sequence at the N terminus the two forms of ACC show about 75% amino acid identity. All of the known functional domains of ACC are found in the homologous regions. Human ACC-beta cDNA has an open reading frame of 7,343 bases, encoding a protein of 2,458 amino acids, with a calculated molecular mass of 276,638 Da. The mRNA size of human ACC-beta is approximately 10 kb and is primarily expressed in heart and skeletal muscle tissues, whereas ACC-alpha mRNA is detected in all tissues tested. A fragment of ACC-beta cDNA was expressed in Escherichia coli and antibodies against the peptide were generated to establish that the cDNA sequence that we cloned is that for ACC-beta.
Resumo:
T cells, B cells, and antibody are found in the white matter of the central nervous system in multiple sclerosis. The epitope center for the antibody response to human myelin basic protein (MBP) fits precisely the minimal epitope Pro85-Val-Val-His-Phe-Phe-Lys-Asn-Ile-Val-Thr-Pro96 for that reported for HLA DR2b (DRB1*1501)-restricted T cells that recognize MBP [Wucherpfenning, K.W., Sette, A., Southwood, S., Oseroff, C., Matsui, M., Strominger, J. & Hafler, D. (1994) J. Exp. Med. 179, 279-290], and overlaps with the reported DR2a-restricted epitope for T cells reactive to MBP [Martin, R., Howell, M. D., Jaraquemada, D., Furlage, M., Richert, J., Brostoff, S., Long, E. O., McFarlin, D. E. & McFarland, H. F. (1991) J. Exp. Med. 173, 19-24]. We describe a molecular model of this epitope.
Resumo:
Bound in a vol. with supplied title: [Austin-Topolovampo railroad documents]
Resumo:
Plate "Philadelphia typographical society," facing pl 56, accompanied by leaf with descriptive letterpress.