Headspace needle-trap analysis of priority volatile organic compounds from aqueous samples: application to the analysis of natural and waste waters

Combining headspace (HS) sampling with a needle-trap device (NTD) to determine priority volatile organic compounds (VOCs) in water samples results in improved sensitivity and efficiency when compared to conventional static HS sampling. A 22 gauge stainless steel, 51-mm needle packed with Tenax TA and Carboxen 1000 particles is used as the NTD. Three different HS-NTD sampling methodologies are evaluated and all give limits of detection for the target VOCs in the ng L−1 range. Active (purge-and-trap) HS-NTD sampling is found to give the best sensitivity but requires exhaustive control of the sampling conditions. The use of the NTD to collect the headspace gas sample results in a combined adsorption/desorption mechanism. The testing of different temperatures for the HS thermostating reveals a greater desorption effect when the sample is allowed to diffuse, whether passively or actively, through the sorbent particles. The limits of detection obtained in the simplest sampling methodology, static HS-NTD (5 mL aqueous sample in 20 mL HS vials, thermostating at 50 °C for 30 min with agitation), are sufficiently low as to permit its application to the analysis of 18 priority VOCs in natural and waste waters. In all cases compounds were detected below regulated levels

Cross-validation of methods used for analysis of MTBE and other gasoline components in groundwater.

Head space gas chromatography with flame-ionization detection (HS-GC-FID), ancl purge and trap gas chromatography-mass spectrometry (P&T-GC-MS) have been used to determine methyl-tert-butyl ether (MTBE) and benzene, toluene, and the ylenes (BTEX) in groundwater. In the work discussed in this paper measures of quality, e.g. recovery (94-111%), precision (4.6 - 12.2%), limits of detection (0.3 - 5.7 I~g L 1 for HS and 0.001 I~g L 1 for PT), and robust-ness, for both methods were compared. In addition, for purposes of comparison, groundwater samples from areas suffering from odor problems because of fuel spillage and tank leakage were analyzed by use of both techniques. For high concentration levels there was good correlation between results from both methods.

Cross-validation of methods used for analysis of MTBE and other gasoline components in groundwater.

Head space gas chromatography with flame-ionization detection (HS-GC-FID), ancl purge and trap gas chromatography-mass spectrometry (P&T-GC-MS) have been used to determine methyl-tert-butyl ether (MTBE) and benzene, toluene, and the ylenes (BTEX) in groundwater. In the work discussed in this paper measures of quality, e.g. recovery (94-111%), precision (4.6 - 12.2%), limits of detection (0.3 - 5.7 I~g L 1 for HS and 0.001 I~g L 1 for PT), and robust-ness, for both methods were compared. In addition, for purposes of comparison, groundwater samples from areas suffering from odor problems because of fuel spillage and tank leakage were analyzed by use of both techniques. For high concentration levels there was good correlation between results from both methods.

Nanocrystalline Ge Flash Memories: Electrical Characterization and Trap Engineering

Conventional floating gate non-volatile memories (NVMs) present critical issues for device scalability beyond the sub-90 nm node, such as gate length and tunnel oxide thickness reduction. Nanocrystalline germanium (nc-Ge) quantum dot flash memories are fully CMOS compatible technology based on discrete isolated charge storage nodules which have the potential of pushing further the scalability of conventional NVMs. Quantum dot memories offer lower operating voltages as compared to conventional floating-gate (FG) Flash memories due to thinner tunnel dielectrics which allow higher tunneling probabilities. The isolated charge nodules suppress charge loss through lateral paths, thereby achieving a superior charge retention time. Despite the considerable amount of efforts devoted to the study of nanocrystal Flash memories, the charge storage mechanism remains obscure. Interfacial defects of the nanocrystals seem to play a role in charge storage in recent studies, although storage in the nanocrystal conduction band by quantum confinement has been reported earlier. In this work, a single transistor memory structure with threshold voltage shift, Vth, exceeding ~1.5 V corresponding to interface charge trapping in nc-Ge, operating at 0.96 MV/cm, is presented. The trapping effect is eliminated when nc-Ge is synthesized in forming gas thus excluding the possibility of quantum confinement and Coulomb blockade effects. Through discharging kinetics, the model of deep level trap charge storage is confirmed. The trap energy level is dependent on the matrix which confines the nc-Ge.

Combined TUNEL and TRAP methods suggest that apoptotic bone cells are inside vacuoles of alveolar bone osteoclasts in young rats

Although it is generally accepted that osteoclasts breakdown and resorb bone matrix, the possibility that they may also be able to engulf apoptotic osteoblasts/ lining cells and/or osteocytes remains controversial. Apoptosis of osteoblasts/ lining cells and/or osteocytes and interactions between these cells and osteoclasts are extremely rapid events that are difficult to observe in viva. A suitable in viva model for studying these events is the alveolar bone of young rats because it is continuously. Thus, sections of aldehyde fixed alveolar undergoing intense resorption/remodeling bone of young rats were stained by the combined terminal deoxynucleotidyl transferase-mediated dUTP nick end labeling (TUNEL) method and the tartrate-resistant acid phosphatase (TRAP) method for the simultaneous visualization of apoptotic cells and osteoclasts in the same section. The combined TUNEL and TRAP reactions, in the same section, greatly facilitated visualization of relationship between osteoclasts and apoptotic bone cells during alveolar bone remodeling. Our results showed that several TRAP-positive osteoclasts exhibited large vacuoles containing TUNEL positive apoptotic structures, probably derived from osteoblasts/lining cells and/or osteocytes. These results support the idea that alveolar bone osteoclasts are able to internalize dying apoptotic bone cells.

Methanol and ethanol analysis in marine sediment pore water

Low-molecular-weight (LMW) alcohols are produced during the microbial degradation of organic matter from precursors such as lignin, pectin, and carbohydrates. The biogeochemical behavior of these alcohols in marine sediment is poorly constrained but potentially central to carbon cycling. Little is known about LMW alcohols in sediment pore waters because of their low concentrations and high water miscibility, both of which pose substantial analytical challenges. In this study, three alternative methods were adapted for the analysis of trace amounts of methanol and ethanol in small volumes of saline pore waters: direct aqueous injection (DAI), solid-phase microextraction (SPME), and purge and trap (P&T) in combination with gas chromatography (GC) coupled to either a flame ionization detector (FID) or a mass spectrometer (MS). Key modifications included the desalination of samples prior to DAI, the use of a threaded midget bubbler to purge small-volume samples under heated conditions and the addition of salt during P&T. All three methods were validated for LMW alcohol analysis, and the lowest detection limit (60 nM and 40 nM for methanol and ethanol, respectively) was achieved with the P&T technique. With these methods, ambient concentrations of volatile alcohols were determined for the first time in marine sediment pore waters of the Black Sea and the Gulf of Mexico. A strong correlation between the two compounds was observed and tentatively interpreted as being controlled by similar sources and sinks at the examined stations.

Savages into citizens: Families, political purge, and reconciliation in Cordoba, Argentina, 1820--1862

This dissertation explores the political exclusion and reintegration of families and individuals in Córdoba, Argentina during the early nineteenth-century. Part one is an examination of how Federals in Córdoba managed the process of political identification and purge. Federals set up ad hoc institutions that were responsible for targeting political subversives within provincial communities. From 1831 to 1852, Federals managed to target, or “classify,” over 400 individuals and families in various towns and villages as “savage Unitarians,” a political label that meant the certain loss of rights, property, exile, and worse. Federals also sought active participation among “citizens” from all levels of society. Thus, I argue that the process of correctly identifying a “savage Unitarian” in Córdoba was constantly subject to modification at the local level. I also reconstruct the stories of accused families as they struggled to survive the political purges. Many of the families were large landowners and wealthy merchants, confirming that early republican Argentine political struggles were often intra-elite affairs. However, the “classified” individuals and families also represented a variety of socio-economic, ethnic, and racial groups. ^ The second part of this study focuses on families who petitioned Federal authorities for the restitution of rights and property. They proclaimed their loyalty to the “Federal cause,” and often, they had friends and family who could vouch for their claims. These petitions forced Federal authorities to doubt the precision of political identification and re-think how the ideology of Federalism was defined. Authorities granted most requests for repatriation, thereby creating a process of reintegration that included amnesty and restitution. Yet, this system failed to repair the psychological, emotional, materials, and political effects of political purge. Conflicts between society and state led to numerous misunderstandings about what restitution, justice, and reconciliation meant. The new regime's leaders more often denied restitution claims to formerly accused families and individuals, demonstrating that the journey from “savage” to citizen left an indelible imprint on family life in mid-nineteenth century Argentina. ^

Occurrence and transformation of organomercury in the Florida Everglades

In this study, a new method was developed based on aqueous phenylation, purge-and-trap preconcentration, gas chromatography (GC) separation, and detection by atomic fluorescence spectrometry (AFS) or inductively coupled plasma mass spectrometry (ICPMS). This technique is suitable for simultaneous determination of trace or ultratrace levels of CH3Hg+ and CH3CH2Hg+ in environmental samples. Method detection limits were 0.03 ng/L for both CH3Hg+ and CH3CH2Hg+ when AFS was used as the detector and 0.02 and 0.01 ng/L for CH3Hg+ and CH 3CH2Hg+ with ICPMS, respectively. The new method has the additional benefits of being free from interference by Cl - and dissolved organic matter. Using the method developed, both CH3Hg+ and CH3CH2Hg+ were detected in a number of soil and sediment samples collected from the Florida Everglades. The identity of CH3CH2Hg+ was verified by purge-and-trap-GC/MS analysis. The possibility of analytical artifact was excluded by using stable isotope tracer technique in combination with ICPMS detection. CH3CH 2Hg+ in the soil samples analyzed was at ng/g level, similar to that of CH3Hg+. The prevalence of CH 3CH2Hg+ in the soil of the Florida Everglades suggests that ethylation plays an important role in the geochemistry of Hg in this wetland. Soil incubation and sawgrass culture experiments using stable isotope tracers revealed that CH3Hg+ was mainly produced by microbial activities under anaerobic conditions, agreeing well with the general understanding of methylation mechanisms of Hg in the environment. Ethylation of Hg was not confirmed in these experiments, indicating that ethylation of Hg most probably follows different mechanisms in comparison to methylation. Further experiments revealed that trace levels of ethyllead species were able to transfer ethyl group to Hg in both deionized water and freshwater matrixes, producing CH3CH2Hg+. This might partially account for the occurrence of CH3CH2Hg+ in the relatively pristine environment of the Florida Everglades.

Ultracold Bose-Fermi mixtures with pairing: quantum phase transition, mechanical stability, and trap confinement

Ultracold dilute gases occupy an important role in modern physics and they are employed to verify fundamental quantum theories in most branches of theoretical physics. The scope of this thesis work is the study of Bose-Fermi (BF) mixtures at zero temperature with a tunable pairing between bosons and fermions. The mixtures are treated with diagrammatic quantum many-body methods based on the so-called T-matrix formalism. Starting from the Fermi-polaron limit, I will explore various values of relative concentrations up to mixtures with a majority of bosons, a case barely considered in previous works. An unexpected quantum phase transition is found to occur in a certain range of BF coupling for mixture with a slight majority of bosons. The mechanical stability of mixtures has been analysed, when the boson-fermion interaction is changed from weak to strong values, in the light of experimental results recently obtained for a double-degenerate Bose-Fermi mixture of 23 Na - 40 K. A possible improvement in the description of the boson-boson repulsion based on Popov's theory is proposed. Finally, the effects of a harmonic trapping potential are described, with a comparison with the experimental data for the condensate fraction recently obtained for a trapped 23 Na - 40 K mixture.

Avaliação de mosto de uva fermentado

O objetivo deste estudo foi determinar a concentração de compostos voláteis nos mostos de uva Chardonnay e Pinot Noir fermentados pela Pichia membranaefaciens, como também analisar as fases de crescimento da levedura durante a fermentação a 15 e 20 °C. Compostos voláteis majoritários da fermentação como: etanol, acetato de etila, acetato de isoamila, acetaldeido, 1-propanol, isobutanol e álcool isoamílico foram isolados e quantificados pelo sistema de "Purge and Trap". A fermentação conduzida a 15 °C mostrou ser mais adequada na produção de acetato de etila, com valores inferiores a 200 mg.L-1 (131,3 e 147,0 mg.L-1) nos mostos Pinot Noir e Chardonnay, respectivamente, enquanto que a 20 °C a produção foi de 286,0 e 270,0 mg.L-1 nos mostos Pinot Noir e Chardonnay, respectivamente.

Konzeptionelle Entwicklung von Mikrokosmos-Experimenten zur Untersuchung der speziesspezifischen Transformationsprozesse des Quecksilbers mittels Isotopenverhältnisbestimmungen

Zur Untersuchung der speziesspezifischen Transformationsprozesse des Quecksilbers in der Umwelt wurden erstmalig Mikrokosmosexperimente unter Verwendung von isotopenangereicherten Verbindungen durchgeführt. Es wurden naturrelevante Bedingungen simuliert, um eine spätere Übertragbarkeit der Ergebnisse auf den biogeochemischen Kreislauf des Quecksilbers zu gewährleisten. Die aufgebauten Mikrokosmen bestanden aus Boden/Pflanzen/Luft-Kompartimenten. Der Boden der Mikrokosmen wurde mit isotopenangereicherten Quecksilberspezies dotiert. Durch die Verwendung von isotopenangereicherten Verbindungen, verbunden mit gleichzeitiger ICP/MS-Detektion, konnten auftretende Transformationsprozesse beobachtet werden. Die Messung der Quecksilberspezies erfolgte mittels GC-ICP/MS nach vorheriger Derivatisierung mit Natriumtetraethylborat und Anreicherung per 'purge and trap'.Die Massenspuren der einzelnen Quecksilberisotope wurden für alle Quecksilberspezies gemessen und daraus dann für jede Spezies die Isotopenverhältnisse gebildet. Bei einer Änderung des Isotopenverhältnisses kann von einer Speziestransformation ausgegangen werden.Aus den Mikrokosmosexperimenten, denen Methylquecksilber als angereicherte Isotopenverbindung zugegeben wurde, konnte gefolgert werden, dass Methylquecksilber im Boden zunächst zu anorganischem Quecksilber demethyliert wurde. Im Anschluss daran erfolgte eine Reduktion zu elementarem Quecksilber. Dieses gebildete elementare Quecksilber verflüchtigte sich nahezu vollständig (ca. 90-100%) vom Boden in die Atmosphäre.Bei der Zugabe von anorganischem Quecksilber als angereicherte Isotopenverbindung in den Boden wurde vorwiegend eine Reduktion zu elementarem Quecksilber beobachtet, das dann in die Atmosphäre emittiert. Es konnte aber auch eine geringe Methylierung (ca. 5%) zu Methylquecksilber beobachtet werden. Daraus kann gefolgert werden, dass die methylierten Quecksilberverbindungen eine wesentliche Rolle im natürlichen Kreislauf des Quecksilbers spielen.Parallel zu den Mikrokosmosexperimenten wurden Feldversuche in einem flussnahen Feuchtgebiet, aus dem auch der Boden für die Mikrokosmosexperimente entnommen worden war, durchgeführt. In den Feldversuchen wurden Quecksilberkonzentrationen und der Quecksilberfluss zwischen dem Boden und der Atmosphäre mit Hilfe von Flusskammerexperimenten bestimmt. Es konnten mit Hilfe von Mikrokosmen, die natürliche Verhältnisse simulieren sollten, und mit Hilfe verschieden angereicherter Isotopenspikes erstmals Speziestransformationen des Quecksilbers direkt beobachtet werden. Die GC-ICP/MS-Methode ermöglichte eine eindeutige Identifikation von Edukt und Produkt der jeweiligen Umwandlung. Allerdings wurde die Untersuchung eingeschränkt durch die irreversiblen biologischen Veränderungen in den eingesetzten Mikrokosmen nach über einer Woche und durch die Notwendigkeit, vergleichsweise hohe Konzentrationen der Spikes einzusetzen, um eine statistisch signifikante Auswertung der Veränderung der Isotopenverhältnisse zu erreichen. Somit sind Mikrokosmosexperimente nur eingeschränkt für Untersuchungen des Quecksilberverhaltens geeignet.Im Rahmen dieser Arbeit ist es aber gelungen, die Mikrokosmenexperimente unter Verwendung von isotopenangereicherten Verbindungen und der GC-ICP/MS-Methode als leistungsstarkes Verfahren zur Beobachtung von Speziestransformationsprozessen des Quecksilbers zu etablieren.

Entwicklung einer online Kopplungsmethode von GC mit ECD- und ICPMS-Detektion zur Bestimmung biogener leichtflüchtiger bromierter und iodierter Kohlenwasserstoffe in Meerwasser und der Atmosphäre

In dieser Arbeit wurde ein zweidimensionales Kopplungssystem zur Bestimmung von leichtflüchtigen bromierten und iodierten Kohlenwasserstoffen (LHKW) in Wasser- und Luftproben entwickelt. Hierzu wurde ein Gaschromatograph mit einem Elektroneneinfangdetektor (ECD) on-line an ein elementselektives induktiv gekoppeltes Plasma-Massenspektrometer (ICPMS) gekoppelt. Dieses extrem nachweisstarke Analysensystem ermöglicht eine simultane Identifizierung unbekannter und koeluierender Peaks sowie eine vereinfachte Quantifizierung mittels ICPMS. Beim Vergleich des GC-ECD-ICPMS-Kopplungssystem mit den herkömmlichen Detektionsmethoden wie dem Massenspektrometer mit Elektronenstoss-Ionisation und dem Atomemissionsdetektor mit mikrowelleninduziertem Plasma schnitt das neu entwickelte Kopplungssystem ausgezeichnet ab. Für die Isolierung der LHKW aus Meerwasserproben wurde die Purge und Trap Technik verwendet, Luftproben wurden durch Besaugung auf Adsorptionsmaterial angereichert. Im Rahmen des BMBF-Teilprojektes ReHaTrop/AFOHAL wurden im August 2001 und im April/Mai 2002 an der Deutschen Nordseeküste Probenahmen durchgeführt. Die Konzentrationen der Wasserproben lagen im Bereich von 0,1-158 ng L-1, die der Luftproben im Bereich von 0,01-470 pptv. Die Messungen bestätigen die wichtige Rolle von Makroalgen im Zusammenhang mit der Produktion von halogenierten Kohlenwasserstoffen. Die Konzentration der iodierten und bromierten Kohlenwasserstoffe war immer höher in Proben, die direkten Kontakt mit Makroalgen hatten. Inkubationsexperimente zeigen für verschiedene braune und grüne Makroalgen individuelle „Fingerprints“ der biogenen LHKW-Produktion. Bei den Messungen an der Nordseeküste wurden Abhängigkeiten zwischen den LHKW und meteorologischen Parametern gefunden.

System-on-a-Chip (SOC) based environmental monitoring platform for the detection of hazardous materials

The purpose of this research is design considerations for environmental monitoring platforms for the detection of hazardous materials using System-on-a-Chip (SoC) design. Design considerations focus on improving key areas such as: (1) sampling methodology; (2) context awareness; and (3) sensor placement. These design considerations for environmental monitoring platforms using wireless sensor networks (WSN) is applied to the detection of methylmercury (MeHg) and environmental parameters affecting its formation (methylation) and deformation (demethylation). ^ The sampling methodology investigates a proof-of-concept for the monitoring of MeHg using three primary components: (1) chemical derivatization; (2) preconcentration using the purge-and-trap (P&T) method; and (3) sensing using Quartz Crystal Microbalance (QCM) sensors. This study focuses on the measurement of inorganic mercury (Hg) (e.g., Hg2+) and applies lessons learned to organic Hg (e.g., MeHg) detection. ^ Context awareness of a WSN and sampling strategies is enhanced by using spatial analysis techniques, namely geostatistical analysis (i.e., classical variography and ordinary point kriging), to help predict the phenomena of interest in unmonitored locations (i.e., locations without sensors). This aids in making more informed decisions on control of the WSN (e.g., communications strategy, power management, resource allocation, sampling rate and strategy, etc.). This methodology improves the precision of controllability by adding potentially significant information of unmonitored locations.^ There are two types of sensors that are investigated in this study for near-optimal placement in a WSN: (1) environmental (e.g., humidity, moisture, temperature, etc.) and (2) visual (e.g., camera) sensors. The near-optimal placement of environmental sensors is found utilizing a strategy which minimizes the variance of spatial analysis based on randomly chosen points representing the sensor locations. Spatial analysis is employed using geostatistical analysis and optimization occurs with Monte Carlo analysis. Visual sensor placement is accomplished for omnidirectional cameras operating in a WSN using an optimal placement metric (OPM) which is calculated for each grid point based on line-of-site (LOS) in a defined number of directions where known obstacles are taken into consideration. Optimal areas of camera placement are determined based on areas generating the largest OPMs. Statistical analysis is examined by using Monte Carlo analysis with varying number of obstacles and cameras in a defined space. ^