Fluoride varnishes containing calcium glycerophosphate: fluoride uptake and the effect on in vitro enamel erosion

OBJECTIVES Calcium glycerophosphate (CaGP) was added to fluoride varnishes to analyze their preventive effect on initial enamel erosion and fluoride uptake: potassium hydroxide (KOH)-soluble and KOH-insoluble fluoride bound to enamel. MATERIALS AND METHODS This study was carried out in two parts. Part 1: 108 enamel samples were randomly distributed into six varnish groups: base varnish (no active ingredients); Duraphat® (2.26 %NaF); Duofluorid® (5.63 %NaF/CaF2); experimental varnish 1 (1 %CaGP/5.63 %NaF/CaF2); experimental varnish 2 (5 %CaGP/5.63 %NaF/CaF2); and no varnish. Cyclic demineralization (90 s; citric acid, pH = 3.6) and remineralization (4 h) was made once a day, for 3 days. Change in surface microhardness (SMH) was measured. Part 2: 60 enamel samples were cut in half and received no varnish (control) or a layer of varnish: Duraphat®, Duofluorid®, experimental varnishes 1 and 2. Then, KOH-soluble and KOH-insoluble fluoride were analyzed using an electrode. RESULTS After cyclic demineralization, SMH decreased in all samples, but Duraphat® caused less hardness loss. No difference was observed between varnishes containing CaGP and the other varnishes. Similar amounts of KOH-soluble and insoluble fluoride was found in experimental varnish 1 and Duofluorid®, while lower values were found for experimental varnish 2 and Duraphat®. CONCLUSION The addition of CaGP to fluoride varnishes did not increase fluoride bound to enamel and did not enhance their protection against initial enamel erosion. CLINICAL RELEVANCE We observe that the fluoride varnishes containing CaGP do not promote greater amounts of fluoride bound to enamel and that fluoride bound to enamel may not be closely related to erosion prevention.

Producción de barniz de base alquídica

El presente trabajo contiene el análisis y la evaluación técnico económica de la fabricación de barniz a nivel industrial. El estudio realizado alcanza el nivel de prefactibilidad. El producto barniz es de tipo bien intermedio, utilizado en un importante número de aplicaciones, mayormente para los recubrimientos en la industria automotriz y de la construcción. El tamaño propuesto para la planta fue determinado a partir del análisis y consideración de las siguientes variables: tecnologías aplicables, disponibilidad de insumos, mercado potencial a sustituir, tasa de descuento de referencia y requerimientos de gestión

(Table 3) Age-related trends of desert pavement properties in the Transantarctic Mountains

Compared to mid-latitude deserts, the properties, formation and evolution of desert pavements and the underlying vesicular layer in Antarctica are poorly understood. This study examines the desert pavements and the vesicular layer from seven soil chronosequences in the Transantarctic Mountains that have developed on two contrasting parent materials: sandstone-dolerite and granite-gneiss. The pavement density commonly ranges from 63 to 92% with a median value of 80% and does not vary significantly with time of exposure or parent material composition. The dominant size range of clasts decreases with time of exposure, ranging from 16-64 mm on Holocene and late Quaternary surfaces to 8-16 mm on surfaces of middle Quaternary and older age. The proportion of clasts with ventifaction increases progressively through time from 20% on drifts of Holocene and late Quaternary age to 35% on Miocene-aged drifts. Desert varnish forms rapidly, especially on dolerite clasts, with nearly 100% cover on surfaces of early Quaternary and older age. Macropitting occurs only on clasts that have been exposed since the Miocene. A pavement development index, based on predominant clast-size class, pavement density, and the proportion of clasts with ventifaction, varnish, and pits, readily differentiated pavements according to relative age. From these findings we judge that desert pavements initially form from a surficial concentration of boulders during till deposition followed by a short period of deflation and a longer period of progressive chemical and physical weathering of surface clasts. The vesicular layer that underlies the desert pavement averages 4 cm in thickness and is enriched in silt, which is contributed primarily by weathering rather than eolian deposition. A comparison is made between desert pavement properties in mid-latitude deserts and Antarctic deserts.

Influencias de los barnices incoloros en las propiedades superficiales de las maderas de construcción

En esta Tesis se cuantifica la variación cromática que producen los barnices en el color de los diferentes tipos de maderas de construcción, obteniendo un modelo matemático de predicción de color de la madera. Se analizan las prestaciones de dieciséis barnices, supuestamente incoloros, aplicados sobre veinte tipos de maderas, angiospermas y gimnospermas, de distintas densidades y latitudes. Ambos materiales son de uso frecuente en el ámbito de la construcción y de fácil localización en las tiendas y almacenes de ambos sectores. Se utilizan técnicas de descomposición cromática, mediante el empleo de microscopio óptico de reflexión, para poder obtener un abanico gráfico de histogramas con valores numéricos de luminosidad y composición cromática, y de esta forma comprobar que los supuestos barnices que se venden como incoloros, no son totalmente incoloros sino que muestran tendencias a virar hacia alguno de los colores básicos. En el proceso experimental de la Tesis, se aplican 16 barnices sobre 20 tipos de maderas, obteniéndose los histogramas de las campañas de fotografías realizadas con cinco años de diferencia, obteniéndose no solo la variación de color que producen los barnices sobre el original de la madera, sino además la influencia de un envejecimiento a los cinco años. La Tesis relaciona el tipo de barniz idóneo para cada tipo de madera, de modo que produzca la menor variación cromática. La Tesis además obtiene un modelo matemático que permite predecir el color final de la madera tratada en función del color inicial de la madera sin barnizar. Se propone en esta Tesis una recomendación de los productos a utilizar en cada uno de los tipos de madera en base a su color inicial. This Thesis quantifies the chromatic variation caused by varnishes in the colour of different types of timbers, obtaining a mathematical model for predicting the timber’s colour. The performance of sixteen varnishes, supposedly colourless, is analysed, applied on twenty types of timber, angiosperms and gymnosperms, of different densities and latitudes. Both materials are of frequent use in the construction field and easily located in the stores and warehouses of both sectors. Chromatic decomposition techniques are used, through the utilization of a reflection optical microscope, in order to obtain a graphic range of histograms with numerical values of luminosity and chromatic composition, and this way confirm that the alleged varnishes sold as colourless are not completely colourless but are prone to shift towards one of the basic colours. During the Thesis’ experimental procedure 16 varnishes are applied on 20 types of timber, obtaining the colour histograms of the photography campaigns carried out with a five years difference, resulting in not only the colour variation caused by the varnishes on the original timber, but also the influence of its ageing five years later. The Thesis links the right type of varnish for each kind of timber, so that as little chromatic variation as possible occurs. The Thesis obtains as well a mathematical model, which makes it possible to predict the final colour of the treated timber depending on the original colour of the timber with no varnish. This Thesis proposes a recommendation of the products to use on each type of timber on the basis of its original colour.

Corrosión inducida por contaminantes hidrosolubles en la intercara metal/pintura

El objetivo principal de este trabajo es profundizar en el conocimiento del fenómeno de la corrosión subpelicular inducida por contaminantes hidrosolubles en la intercara metal/pintura. La contaminación salina del substrato es una situación común en la práctica: la superficie metálica suele estar expuesta a atmósferas contaminadas antes de ser recubierta, limpieza previa del metal con abrasivos contaminados, etc. La eliminación total de estos contaminantes resulta muy difícil de conseguir incluso con las técnicas más sofisticadas de limpieza. Esta investigación se centra en la determinación del efecto de la naturaleza del contaminante y la naturaleza y espesor del recubrimiento en el proceso de corrosión subpelicular del acero. En la investigación se utilizaron dos barnices de naturaleza diferente: poliuretano y vinílico; y se aplicaron a tres espesores diferentes. Los contaminantes empleados en este trabajo fueron: NaCl, NH4C1, CaCl2, Na2S04, (NH4)2S04, NaN03, NH4N03, Ca(N03)2. Los ensayos se realizaron en una cámara de condensación de humedad permanente. Los tiempos de exposición fueron 100, 300 y 600 horas. La velocidad de corrosión se evaluó gravimétricamente, mediante la técnica de pérdida de peso. Se realizaron estudios de permeabilidad al oxígeno y al agua de películas libres de substrato, evaluación de la velocidad de corrosión de probetas sin pintar inmersas en soluciones salinas de los contaminantes seleccionados, conductividad de dichas soluciones salinas, solubilidad del oxígeno en las soluciones salinas, adherencia en seco y en húmedo a diferentes tiempos de exposición. Se aporta evidencia respecto al control ejercido en el proceso corrosivo por el oxígeno que permea a través de la película, mientras que la permeación de agua controla la pérdida de adherencia del recubrimiento. Ambas permeabilidades dependen de la naturaleza del recubrimiento y de su espesor. Se ha investigado la influencia de la naturaleza del contaminante en la intercara metal/pintura. La naturaleza del catión parece quedar enmascarada por el efecto definitivo del anión. La concentración salina ejerce asimismo un efecto importante en la corrosión subpelicular. ABSTRACT The main aim of this work is to study in depth the knowledge of underfilm corrosión induced by hydrosoluble contaminants at the metal/paint Ínterface. The saline contamination of the substrate is a common situation in practice: metallic surfaces use to be exposed to polluted atmospheres, previous cleaning of the metal with contaminated abrasives, etc. Total elimination of these contaminants is hard to obtain even with modern cleaning techniques. This research is focused in determining the effect of contaminant nature, coating nature and its thickness on the steel underfilm corrosión process. In this work we used two varnishes with different nature: polyurethane and vinyl; they were applied in three different thicknesses. The saline contaminants employed were: NaCl, NH4C1, CaCl2, Na2S04, (NH4)2S04, NaN03, NH4N03/ Ca(N03)2. The tests were carried out in a condensation humidity chamber. The period of exposure were 100, 300 and 600 hours. Corrosión rate was assessed by weight loss. Simultaneously, studies on oxygen and water permeability of free films, assessing on corrosión rate of uncoated samples immersed in saline solutions of the selected contaminants, conductivity of these solutions, oxygen solubility in saline solutions, wet and dry adhesión of the polyurethane varnish at different periods of exposure, were carried out. There is clear evidence about control on corrosión process of oxygen that passes through the coating, while the passing of water controls the loss of adhesión of the coating. Both, water and oxygen permeation, depend on the nature and thickness of the coating. It has been researched the inf luence of the nature of contaminant at the metal/paint interface. The nature of the catión seems to be "masked" by the definitive effect of the nature of anión. The saline concentration also exerts an important effect on underfilm corrosión.

Objetos tenaces : adaptive reuse en Meatpacking, 1970–1985

OBJETOS TENACES versa sobre la práctica del adaptive reuse (la “reutilización adaptativa”, la reconversión) explicado a través del fenómeno de ruptura, suspensión y reconfiguración de vínculos que el objeto arquitectónico tiene con respecto a su medio económico, sociocultural, normativo y de utilitas. Se trata de un fenómeno en tres fases, muy próximo al mecanismo empleado por el readymade y por el display, que en arquitectura parte de la crisis que supone un cambio de circunstancias, un desarraigo del objeto respecto de su ámbito anterior. El mecanismo tiene vocación de intervención mínima, desde un posicionamiento actual que comprende el mundo construido como una realidad “ya hecha”, y donde las operaciones de proyecto son acciones de transformación que llevan de una situación de obsolescencia a otra de vigencia renovada, es decir, de una realidad completa a otra igualmente completa. Para ello, la investigación se sirve de tres ejemplos de un mismo entorno geográfico (el área en torno a Meatpacking, en el lado oeste del bajo Manhattan, Nueva York) y temporal (las últimas décadas del siglo XX, en las que los casos se solapan a pesar de tener desarrollos cronológicos diversos). Bell Telephone Laboratories, The West Side Improvement y The National Biscuit Company, reconvertidos a Westbeth, a The High Line y a Chelsea Market, construyen juntos el argumento por suma de conceptos, por adición de fenómenos, estudiando las cualidades y las circunstancias que hacen posible la continuidad de las estructuras, es decir, su supervivencia. El texto forma un corpus que proporciona algunas de las claves del objeto denominado como tenaz a través del análisis sincrónico del antes y el después de su puesta en crisis. A tal efecto, se exponen una serie de figuras razonadas entre las cuales figuran el lijado del barniz, los hilos compartidos, la máscara, la momificación y la vitrina, el puente sobre le desfiladero, el enfriamiento, o las reliquias, incrustaciones y adherencias, todas ellas encaminadas a explicar el proceso de renovación del artefacto como un cambio en el sentido, en el significado, y no tanto en lo material. Entre las consideraciones de la tesis está, por un lado, el carácter relativo del término tenacidad, concepto que define a los objetos que se encuentran y se reconocen en su idoneidad, que tienen capacidad de adaptación, y que precisan finalmente de grandes dosis de pragmatismo para su reconfiguración, siendo todas éstas condiciones necesarias pero sólo suficientes a posteriori. Por otro lado, el texto reflexiona acerca del intangible que comparten todos los objetos así llamados y que consiste en la condición, quizá formidable, de ser reconocibles por parte de los sucesivos intervinientes de su historia, convencidos de que su renovación supone una oportunidad; su desaparición, una pérdida. Finalmente, la investigación apunta hacia el concepto de anacronismo como justificación para los objetos que se demuestran adaptables a épocas sucesivas, y que encajan en el tiempo de forma compleja. ABSTRACT TENACIOUS OBJECTS deals with the practice of the adaptive reuse explained by means of the phenomenon of rupture, suspension and reconfiguration of links that the architectural object has vis-à-vis its economic, socio-cultural and regulatory environment, and its utilitas. It is a phenomenon structured in three stages, very close to the mechanism used by the readymade and by the display, which in architecture arise from the crisis that leads to a change in circumstances, an alienation of the object regarding its previous environment. The mechanism aims to the minimum intervention, from a current positioning which understands the world built as a reality “already made”, and where the operations of the project are transformative actions that take us from a situation of obsolescence to a situation of renewed validity, that is, from a complete reality to one just as complete. For this purpose, the research makes use of three examples in the same geographical area (the Meatpacking Discrict, in the Lower West Side of Manhattan, New York) and the same period (the last decades of the 20th century, in which the cases overlap in spite of their diverse chronological developments). Bell Telephone Laboratories, The West Side Improvement and The National Biscuit Company, reconverted into Westbeth, The High Line and Chelsea Market, make up, together, the argument as a sum of concepts, and addition of phenomena, studying the qualities and circumstances which make the continuity of the structures possible, that is, their survival. The text forms a corpus that provides some of the keys of the so-called tenacious object by means of the synchronic analysis of before and after its crisis. To this end, a series of reasoned figures is presented, including the sanding of varnish, the shared threads, the mask, the mummification and the display cabinet, the bridge over the gorge, cooling, or the relics, incrustations and adherences, all of them aimed at explaining the renovation process of the artifact as a change in the sense and the meaning, rather than the material. The considerations of this dissertation include, on the one hand, the relative nature of the term tenacity, a concept which defines the objects found and recognized in their suitability, that are capable of adapting and which finally require large doses of pragmatism for their reconfiguration, all these conditions being necessary but only sufficient a posteriori. On the other hand, the text reflects on the intangible shared among all the so-called objects, and which consists of the condition, perhaps extraordinary, of being recognized by the subsequent interveners of their history, convinced that their renovation represents an opportunity; their disappearance, a loss. Finally, the dissertation studies the concept of anachronism as a justification for the objects that prove to adapt to subsequent periods, and which fit in time in a complex manner.

Painéis de partículas de saco de cimento e embalagem longa vida aplicados como forro em protótipos de aviários

No presente trabalho, considerou o estudo do potencial de utilização de sacos de cimento e embalagens de longa vida com o intuito de agregar valor a esses resíduos, mediante a fabricação de painéis de partículas para uso como forro em protótipos de galpões avícolas. Para fabricação desse material foi utilizado sacos de cimento descartados nas obras civis, embalagens longa vida residuais e resina poliuretana bicomponente à base de óleo de mamona. O estudo foi dividido em quatro etapas: 1) Caracterização da matéria-prima (sacos de cimento); 2) Efeito da densidade e teor de resina nas propriedades físicas, mecânicas e térmicas de painéis de partículas de saco de cimento; 3) Avaliação do desempenho de embalagens longa vida e verniz como revestimentos dos painéis selecionados na etapa anterior; 4) Determinação do desempenho térmico de protótipos de aviários executados em escala reduzida e distorcida com forro de painel de saco de cimento e embalagem longa vida. Os resultados obtidos indicaram: Em razão do painel com 0,6 g.cm-3 e 12% de resina ter apresentado melhor desempenho nas propriedades investigadas, essa combinação foi selecionada para avaliar o desempenho do material (físicas, mecânicas e térmicas) quando revestido com embalagens longa vida, adotando a testemunha e o verniz como um revestimento comparativo. Dentre os revestimentos avaliados, os painéis com embalagens de longa vida, foram superiores aos revestidos com verniz, quando comparados as suas propriedades físicas, mecânicas e térmicas. Dessa maneira, painéis com 0,6 g.cm-3 e 12% de resina revestidos embalagens longa vida, foram testados como forro quanto ao desempenho térmico (primavera, verão, outono e inverno) em protótipos em escala reduzida e distorcida, mediante a determinação de índices de conforto térmico (Entalpia e IAPfc) para aves de corte. A associação do forro sob o protótipo permitiu reduzir a temperatura interna do ar e dos índices de conforto térmico na primavera, verão e outono, enquanto que no inverno não foi constatado eficácia do material. Dentre as estações estudadas, o verão e a primavera, demonstraram serem as épocas mais críticas para criação de aves corte em instalações avícolas que apresentem características semelhantes aos protótipos experimentais.

Emissions from the Pyrolysis and Combustion of Different Wastes

Paper submitted to the 7th International Symposium on Feedstock Recycling of Polymeric Materials (7th ISFR 2013), New Delhi, India, 23-26 October 2013.

Student's handbook of paints, colours, oils and varnishes.

Mode of access: Internet.

Traité théorique et pratique sur l'art de faire et d'appliquer les vernis : sur les différens genres de peinture par impression et en décoration, ainsi que sur les couleurs simples et composées ... /

Includes index.

The painter's laboratory guide : a handbook on paints, colours, and varnishes for students /

Includes index.

Analysis of mixed paints,

Mode of access: Internet.

Alton Towers Triptych

1 ft. 2 1/4 in.x 1 ft. 5 19/32 in.x 4 41/64 in.; copper gilt with champlevé enamel, bordered by strips of copper gilt, set with six semi-precious stones and partly decorated with vernis brun (brown varnish) on wood

Coloring, finishing and painting wood,

"References" at end of each chapter.

The painter and varnisher's guide, or, A treatise, both in theory and practice, on the art of making and applying varnishes, on the different kinds of painting ; and on the method of preparing colours both simple and compound ... /

Mode of access: Internet.