O RATO COMO MODELO EXPERIMENTAL DO DIABETES - ESTUDO CLINICO-LABORATORIAL

In this study, 90 Wistar rats were used. They were equally divided into three experimental groups - control group (CG), diabetic group (DG) and treated diabetic group (TG). The analyzed parameters were clinical (behavior, activity, general aspect, weight, water ingestion and diuresis) and biochemical (fasting glycemia and urinary glycosis). The diabetes was induced by alloxan and, then, treated with insulin associated to oral hypoglycemic (acarbosis). Observations were made at 5 experimental moments, as it follows: 1, 3, 6, 9, and 12 months after the diabetes induction. The results were submitted to variance analysis, with 5% of significance level. The DG presented lower weight and higher diuresis level than the CG and TG. The water ingestion of the CG was similar to TG. The glycemia levels were higher in DG than in CG, at every experimental moment. The TG, however, presented glycemia similar to the CG, except for the dosages at 3, and 9 months. They urinary glycosis of the DG and TG were similar between themselves, but higher than the one of the CG.

Intrapulpar temperature during continuous CO2 laser irradiation in human molars: An in vitro study

To establish safety parameters, we in vitro studied the increase in intrapulpal temperature caused by the use of a cw CO2 laser. A thermistor was implanted in the inner part of the pulpal chamber of 25 human lower third molars to measure the intrapulpal temperature produced by laser powers between 2-10 W and exposure times of 0.5-25.0 s. The Pearson linear correlation factor applied to the measured values showed there is a direct relationship between the independent variable and the applied power. A variance analysis produced the linear regression equation: T=1.10+(0.127)E where T is the temperature and E the energy. The results showed that, with a power of 4 W and maximum exposure time of 2.5 s (10 J) and a power density of 12738.85 W cm-2, there will be no damaging reactions affecting the pulpal tissues.

Avaliacao da necessidade da dosagem rotineira de hematocrito, hemoglobina, ureia e creatinina sericos durante a avaliacao pre-anestesica

Background and Objectives - There are many questions and opinions about the value of routine preoperative tests as an integral part of the preanesthetic evaluation. Current trends suggest that such tests should be based on detailed clinical and physical evaluation. Since such tests are still routinely performed and questions about their real value still persist, the aim of this study was to assess the value of routine hematocrit (Ht), hemoglobin concentration (Hb), blood urea nitrogen (BUN) and serum creatinine results in patients undergoing elective surgery, to establish when they are needed and aiming at answering such questions. Methods - 1065 patients aged 12 years and above, physical status ASA I, II and III, scheduled for elective surgery were studied. Patients were divided into 7 different age groups with randomized distribution of gender. Ht, Hb, BUN and serum creatinine results, routinely asked by our surgical departments, were observed and analyzed. Variance Analysis was used for each variable, and the Bonferroni Multiple Comparison Test was used to compare group to group. Differences were considered significant when p < 0.05 (5%). Results - For all patients, 4025 laboratory tests were obtained. The number of tests was the same for each group. There were no differences in Ht and Hb values which remained within normal ranges. Considering BUN and serum creatinine, there was a difference between younger and older patients, but the results were normal in all groups. Conclusions - We concluded that mean Ht, Hb, BUN and serum creatinine values in all age groups were all acceptable for surgical patients in general. However, they are barely useful if performed regardless of clinical evaluation. Thus, such preoperative routine tests should be abandoned and the good clinical practice with common sense should prevail in indicating them.

Utilization of fish protein hydrolysate in prepared diets for pacu, Piaractus mesopotamicus, larvae

Growth and survival rates of pacu, Piaractus mesopotamicus, larvae fed prepared diets containing different animal protein sources were evaluated. Four diets with the same level of crude protein (CP) (36%) and calories (4.02 kcal gross energy/g of diet) were fed to the larvae. Diets were formulated to contain one of four protein sources: (1) fish meal (FM), (2) tilapia residue silage (TS), (3) protein hydrolysate from tilapia residue (HT), and (4) eviscerated tilapia residue (HET). Larvae were fed Artemia nauplii for six days, prior to the start of the study, and the prepared diet was supplied from day 7 until the study concluded. Variance analysis showed no significant differences (P > 0.05) for survival rates and larval final lengths among treatments. However, final average weights were significantly different (P < 0.05 for larvae fed FM and HT. Average survival rates were relatively high and ranged from 68.1% to 73.9%. After the live food was replaced by prepared diets, no larval growth was observed for any treatment. Fish protein hydrolysate (HT and HET) and fish silage showed potential to be used as ingredients in the diet of pacu larvae. However, hydrolysate inclusion levels, processing methods to minimize nutrient lixiviation, and the best moment to replace live food with an inert diet (weaning) need further investigation. © 2003 by The Haworth Press, Inc. All rights reserved.

Surface roughness of packable composite resins polished with various systems

Purpose: The aim of this study was to evaluate the surface roughness of four packable composite resins, SureFil™ (Dentsply, Petrópolis, Rio de Janeiro, Brazil), Prodigy Condensable™ (Kerr Co., Orange, CA, USA), Filtek P60™ (3M do Brasil, São Paulo, Brazil), and ALERT® (Jeneric/Pentron, Inc., Wallingford, CT, USA) and one microhybrid composite resin (Filtek Z250™, 3M do Brasil) after polishing with four finishing systems. Materials and Methods: Twenty specimens were made of each material (5 mm in diameter and 4 mm high) and were analyzed with a profilometer (Perthometer® S8P, Perthen, Mahr, Germany) to measure the mean surface roughness (Ra). The specimens were then divided into four groups according to the polishing system: group 1 - Sof-Lex™ (3M do Brasil), group 2 - Enhance™ (Dentsply), group 3 - Composite Finishing Kit (KG Sorensen, Barueri, São Paulo, Brazil), and group 4 - Jiffy Polisher Cups® (Ultradent Products, Inc., South Jordan, UT, USA). The specimens were polished and then evaluated for Ra, and the data were subjected to analysis of variance, analysis of covariance, and Tukey's test (p = .05). Results: The mean Ra of SureFil polished with Sof-Lex was significantly lower than that of KG points. Prodigy Condensable polished with Enhance showed a significantly less rough surface than when polished with Sof-Lex. Filtek P60 did not exhibit a significant difference with the various polishing systems. For ALERT the lowest mean Ra was obtained with Sof-Lex and the highest mean Ra with KG points. Regarding Filtek Z250, polishing with KG and Jiffy points resulted in a significantly lower mean Ra than when polished with Enhance. Conclusions: Packable composite resins display variable roughness depending on the polishing system used; the Sof-Lex disks and Jiffy points resulted in the best Ra values for the majority of the materials tested.

Caracterização biométrica e química da folha de Mentha pulegium x spicata (Lamiaceae)

The hybrid Mentha pulegium x spicata, also well-known as poejo de praia, it is a perennial, low plant, with fields, violet stem and opposite leaves, with lance format and sawed board, presenting characteristic smell. The objective of the present work was accomplish a study of the leaf anatomy, including a biometric study of tissue and quantitative analysis of secretory trichomes/mm2 and of stomata/mm2 in both faces of the epidermis, besides a chemical analysis of the essential oil. Histological permanent laminas were made for anatomical analysis of the leaf surface and also sheets of the impression to foliate for the count of the trichomes number and stomatas. The chemical studies were made through the extraction of the essential oil by hydrodistillation and analyzed in GC-MS. The capitate and peltates trichomes are present on both sides of the leaf, even so they prevail in the abaxial surface. The variance analysis show that there are significant differences for the number of capitate trichomes and tectores between the adaxial and abaxial surfaces, but they are not significant for the peltate trichoma. The analyzed of essential oil shows the presence of a majority component, trans piperitone epoxide, being it responsible for more than 80% of the relative composition in the essential oil.

Uso racional de nutrientes no cultivo hidropônico de amorperfeito

The objective of this work was to evaluate different concentrations of nutritional solution in the hydroponic cultivation of Viola x wittrockiana Gams. The experiment was conducted in DFT hydroponic system, in a completely randomized design with a 5×4 factorial scheme and five nutrient solution concentrations (50, 75, 100, 125 and 150%), four evaluation periods with three replications of three plants for each treatment. Plant height, root length, number of leaves, flowers and floral buttons; fresh and dry weight of shoot and root were determined. The results were submitted to variance analysis, Tukey's test for evaluation periods and regression analysis for nutrient solution. A decrease in the development of the shoot and root was observed with an increase of the number of cultivation days; the greatest number of floral buttons occurred in the third week of cultivation. A reduction in the plant height, root system length, the number of leaves and the fresh and dry weight of shoot was observed generally with the increase of nutrient solution concentration.

In vitro evaluation of the precision of working casts for implant-supported restoration with multiple abutments

Objective: The purpose of this study was to compare the accuracy of two working cast fabrication techniques using strain-gauge analysis. Methods: Two working cast fabrication methods were evaluated. Based on a master model, 20 working casts were fabricated by means of an indirect impression technique using polyether after splinting the square transfer copings with acrylic resin. Specimens were assigned to 2 groups (n=10): Group A (GA): type IV dental stone was poured around the abutment analogs in the conventional way; Group B (GB), the dental stone was poured in two stages. Spacers were used over the abutment analogs (rubber tubes) and type IV dental stone was poured around the abutment analogs in the conventional way. After the stone had hardened completely, the spacers were removed and more stone was inserted in the spaces created. Six strain-gauges (Excel Ltd.), positioned in a cast bar, which was dimensionally accurate (perfect fit) to the master model, recorded the microstrains generated by each specimen. Data were analyzed statistically by the variance analysis (ANOVA) and Tukey's test (α= 5%). Results: The microstrain values (με) were (mean±SD): GA: 263.7±109.07με, and GB: 193.73±78.83με. Conclusion: There was no statistical difference between the two methods studied.

Thermocycling effect on microhardness of laboratory composite resins

Tha aim of this study was to evaluate the thermocycling effect on microhardness of laboratory composite resins, 30 disks were fabricated, 5mm of diameter and 2mm of width, using 3 laboratory resins: G1 (n=10) - RESILAB MASTER (Wilcos-Brasil), G2 (n=10) - Vita VMLC (VITA Zahnfabrik-Germany), and G3 (n=10) - Vita Zeta (VITA Zahnfabrik-Germany). Vickers microhardness (HV) of all specimens was evaluated using a microhardness tester FM-700 (Future Tech- 50 g/10s). The specimens were measured before and after the thermocycling (3,000 times and 12,000 times - 5°/55°C±1). The microhardness values before cycling were (mean±SD): G1: 55.50±4.6; G2: 35.54±2.5; G3: 27.97±1.6; after 3,000 thermocycles: G1: 55.54±3.9; G2: 29.92±2.73; G3:21.01±1.4 and after 12,000 cycles G1: 54.27±3.2; G2: 30.91±1.6; G3: 23.81±0.9. Variance analysis (ANOVA) and Tukey's test was accomplished (p<0.05), the highest microhardness values were observed in G1: G2 and G3 showed reduction of microhardness values. It was concluded that, after thermocycling, the tested laboratory composites resins are susceptible to the decrease of surface microhardness.

Propriedades físicas de um latossolo vermelho cultivado no sistema plantio direto

The pressure caused by agricultural machinery traffic many result in soil compactation in no-tillage system. The aim of this work was to evaluate no-tillage system onset,time on some physical properties, index S and organic matter (OM) of an oxysol located in Jaboticabal, Sao Paulo State, Brazil. The experiment had completely randomized split-splot design. The treatments consisted of four no-tillage systems: no-tillage for 2 years, no-tillage for 4 years, no-tillage for 6 years and one natural wooded area. The evaluated layers were: Q-0.10m, 0.10-0.20m and 0.20-030m. The following were determined: soil porosity, soil aggregates, bulk density, index S and organic matter. The results were submitted to variance analysis and when there was a difference between averages, Tukey's test was used to compare them. The natural wooded area showed higher organic matter, macroporosity, hydraulic conductivity and Index S. There was no difference between the studied parameters, showing that the no-tillage system for six years was not enough to change the soil physical property.

Perfil de FSH e LH na divergência folicular em novilhas Nelore (Bos indicus)

Present study aimed to evaluate gonadotropins profiles in 12 Nelore heifers, in order to test the hypothesis that FSH concentrations decrease and LH presents a transient increase during follicle selection. Blood samples from jugular vein were harvested twice daily starting at the time of ovulation (D0) until D5. Plasma samples were assayed for FSH and LH by double antibody radioimmunoassay method. LH and FSH assay sensitivity was 0,02ng/ml and 0,005ng/ml, respectively. The intraassay coefficient of variation was 13,6% and 18,8%, respectively. Data (mean±SEM) were normalized to follicle deviation and analyzed by ANOVA and by linear, cubic, and quadratic regressions. Comparisons between higher and lower FSH values were also performed by T-test. There was no effect of time in plasmatic FSH and LH circulating levels when variance analysis or regression analysis were performed. However, by T-test, FSH concentrationsreached the lowest plasmatic levels 36 (0,40±0,05ng/ml) and 60 hours (0,42±0,04ng/ml) after follicular deviation, comparatively to 36 hours before deviation, when the concentrations were maximal (0,63±0,08ng/ml). In conclusion, there is a FSH decrease, although a transient LH elevation has not been confirmed encompassing follicle deviation in Nelore females.

Leitões lactentes e desmamados alimentados com dietas farelada ou extrusada seca e umida

This work was conducted throughout three phases of swine's growth (7 days from birth till the weaning age; from weaning until 7 days later and from 8 to 21 days after weaning); taking as objective the evaluation of the development of suckling and weaned piglets fed with a bran or extruded, dried and wet diet. We've used, for this paper, a total number of 31 pigs breeds, weaned and in average 21 day's lifetime and 3 different rations: dried bran; dried extruded bran and wet extruded bran (2 volumes of water to one volume of ration). During the 8th and 21st day after weaning all the animals received the same bran dried ration. Water and ration were supplied ad libitum. The experimental delimitation was totally random, with 3 treatments and eleven repetitions in the two first phases and five repetitions in the third phase, the multivariate variance analysis applied in the inferences about the results and from this we could conclude that the weight daily gain and the ration daily consumption were significantly not affected, i.e. by the processing, by the dry material ration content. However, we could observe a tendency to increase ration consumption and weight gaining when the animals were fed with bran extruded wet ration.

Color stability after accelerated aging of two silicones, pigmented or not, for use in facial prostheses

One of the greatest challenges faced by buccomaxillofacial prosthetists is to reproduce the patient's exact skin color and provide adequate esthetics. To reach this objective, professionals must use materials with easy characterization and that maintain color over long periods of time. The objective of this study was, thus, to evaluate the color stability of two types of silicones, Silastic 732 and Silastic MDX4-4210. Twenty-four test specimens were made from each type of silicone and were divided into a colorless group and groups intrinsically pigmented with ceramics, cosmetics or iron oxide. The specimens were submitted to an accelerated system of aging for non-metallic materials. Readings were carried out initially and after periods corresponding to 163, 351, 692 and 1,000 hours of aging, using a reflection spectrophotometer analysis, and color alterations were calculated by the CIE L*a*b* system. The data were submitted to variance analysis and Tukey's test at a 5% level of probability. The results demonstrated that, irrespective of the period of time analyzed, all the materials underwent some type of chromatic alteration (ΔE > 0). The test specimens made with Silastic 732 and MDX4-4210, without pigmentation, presented the lowest color alteration values after 1,000 hours of aging. Of the pigments, ceramic presented the lowest color alteration values and cosmetic powder presented the highest values. Thus, it may be concluded that the materials without the incorporation of pigments presented similar color alteration values, and did not differ statistically. The cosmetic powder used in this study was the pigment that most altered the color of the test specimens. © 2009 Sociedade Brasileira de Pesquisa Odontológica.

Efeito da chuva sobre a ação do herbicida imazapyr no controle de plantas daninhas aquáticas

The aim of this study was to evaluate the influence of different periods of rainfall that occurred after the application of the imazapyr herbicide on the control efficiency of Pistia stratiotes and Eichhornia crassipes. We studied 10 mm rainfall, applied for 5' at different time periods (0h, 2h, 4h, 6h, 8h, 12h, 24h, not simulated rainfall) after the application of imazapyr formulation Arsenal NA, 250 g ai ha -1 (1.0 L cp ha -1). The experiment had completely randomized design with four replications. Plants were evaluated at 7, 14, 21, 28 and 35 days after application (DAA), and the results submitted to analysis of variance by F test and treatment means compared by Tukey's test (p <0. 05). The occurrence of rainfall up to 6 hours after herbicide application, plants of P. stratiotes, negatively affected its efficiency and control; rainfall intervals over 8 hours had no effect in control. The occurrence of rainfall at all time intervals did not affect the control of E. crassipes plants.

Fungigação no controle do mofo branco e produtividade do feijoeiro em condições de cerrado brasileiro

The aim of this research was to evaluate the white mold severity (Sclerotinia sclerotiorum (Lib.) of Bary), bean production components and yield (Phaseolus vulgaris L.), variety Perola, according to the application of procimidone fungicide (Sialex 500), through fungigation (center pivot) and automotive sprayer (Uniport). The study was carried under field production commercial conditions, in Primavera do Leste - MT - Brazil. The experiment consisted of 5 treatments (with 4 repetitions of 4 ha each), all with two procimidone applications (1.2 kg ha-1 each application, same as, 0.6 kg a.i. per hectare) to the 42 and 52 days after seeding. The water depths of 5.5 and 11.0 mm were tested in the application through central pivot (this had your checked uniformity), providing volumes of 55.000 and 110.000 L ha-1, respectively, and the volumes of 120 and 200 L ha-1 in the automotive sprayer. The severity of disease was evaluated by the percentage of the area affected by plant damage using diagramatic grade scale of white mold severity, as described by Azevedo (1998). The values were used to calculate the area under the disease progress curve (AUDPC). They were also analyzed, the number of the fungus apothecia during the crop cycle and the residual sclerotias weight in harvest. On this occasion, it was also evaluated the crop yield parameters: number of plants per plot (final stand), pods per plant, grains per pod, medium weight of 200 grains and productivity of grains. The AUDPC values, apothecia to 42, 49 and 56 days after seeding, sclerotias in 2 soil kg and the crop productivity parameters were submitted to the variance analysis and Tukey Test at 0.05 of probability. This test was also applied in the comparison among the different fungicide application methods, independent of spray volumes in each one. The statistical processing was accomplished by STAT program. The results showed that weren't differences among application techniques studied in relation to productivity parameters, however, best white mold control, smaller apothecia number to 49 and 56 days after seeding and smaller weight of residual sclerotias in the harvest were obtained with the fungigation, independently of the spray volume used.