Optimal Recycling Combination of Ash in South-East Finland

The present world energy production is heavily relying on the combustion of solid fuels like coals, peat, biomass, municipal solid waste, whereas the share of renewable fuels is anticipated to increase in the future to mitigate climate change. In Finland, peat and wood are widely used for energy production. In any case, the combustion of solid fuels results in generation of several types of thermal conversion residues, such as bottom ash, fly ash, and boiler slag. The predominant residue type is determined by the incineration technology applied, while its composition is primarily relevant to the composition of fuels combusted. An extensive research has been conducted on technical suitability of ash for multiple recycling methods. Most of attention was drawn to the recycling of the coal combustion residues, as coal is the primary solid fuel consumed globally. The recycling methods of coal residues include utilization in a cement industry, in concrete manufacturing, and mine backfilling, to name few. Biomass combustion residues were also studied to some extent with forest fertilization, road construction, and road stabilization being the predominant utilization options. Lastly, residues form municipal solid waste incineration attracted more attention recently following the growing number of waste incineration plants globally. The recycling methods of waste incineration residues are the most limited due to its hazardous nature and varying composition, and include, among others, landfill construction, road construction, mine backfilling. In the study, environmental and economic aspects of multiple recycling options of thermal conversion residues generated within a case-study area were studied. The case-study area was South-East Finland. The environmental analysis was performed using an internationally recognized methodology — life cycle assessment. Economic assessment was conducted applying a widely used methodology — cost-benefit analysis. Finally, the results of the analyses were combined to enable easier comparison of the recycling methods. The recycling methods included the use of ash in forest fertilization, road construction, road stabilization, and landfill construction. Ash landfilling was set as a baseline scenario. Quantitative data about the amounts of ash generated and its composition was obtained from companies, their environmental reports, technical reports and other previously published literature. Overall, the amount of ash in the case-study area was 101 700 t. However, the data about 58 400 t of fly ash and 35 100 t of bottom ash and boiler slag were included in the study due to lack of data about leaching of heavy metals in some cases. The recycling methods were modelled according to the scientific studies published previously. Overall, the results of the study indicated that ash utilization for fertilization and neutralization of 17 600 ha of forest was the most economically beneficial method, which resulted in the net present value increase by 58% compared to ash landfilling. Regarding the environmental impact, the use of ash in the construction of 11 km of roads was the most attractive method with decreased environmental impact of 13% compared to ash landfilling. The least preferred method was the use of ash for landfill construction since it only enabled 11% increase of net present value, while inducing additional 1% of negative impact on the environment. Therefore, a following recycling route was proposed in the study. Where possible and legally acceptable, recycle fly and bottom ash for forest fertilization, which has strictest requirements out of all studied methods. If the quality of fly ash is not suitable for forest fertilization, then it should be utilized, first, in paved road construction, second, in road stabilization. Bottom ash not suitable for forest fertilization, as well as boiler slag, should be used in landfill construction. Landfilling should only be practiced when recycling by either of the methods is not possible due to legal requirements or there is not enough demand on the market. Current demand on ash and possible changes in the future were assessed in the study. Currently, the area of forest fertilized in the case-study are is only 451 ha, whereas about 17 600 ha of forest could be fertilized with ash generated in the region. Provided that the average forest fertilizing values in Finland are higher and the area treated with fellings is about 40 000 ha, the amount of ash utilized in forest fertilization could be increased. Regarding road construction, no new projects launched by the Center of Economic Development, Transport and the Environment in the case-study area were identified. A potential application can be found in the construction of private roads. However, no centralized data about such projects is available. The use of ash in stabilization of forest roads is not expected to increased in the future with a current downwards trend in the length of forest roads built. Finally, the use of ash in landfill construction is not a promising option due to the reducing number of landfills in operation in Finland.

Real-time monitoring of laser scribing process utilizing high-speed camera

Currently, laser scribing is growing material processing method in the industry. Benefits of laser scribing technology are studied for example for improving an efficiency of solar cells. Due high-quality requirement of the fast scribing process, it is important to monitor the process in real time for detecting possible defects during the process. However, there is a lack of studies of laser scribing real time monitoring. Commonly used monitoring methods developed for other laser processes such a laser welding, are sufficient slow and existed applications cannot be implemented in fast laser scribing monitoring. The aim of this thesis is to find a method for laser scribing monitoring with a high-speed camera and evaluate reliability and performance of the developed monitoring system with experiments. The laser used in experiments is an IPG ytterbium pulsed fiber laser with 20 W maximum average power and Scan head optics used in the laser is Scanlab’s Hurryscan 14 II with an f100 tele-centric lens. The camera was connected to laser scanner using camera adapter to follow the laser process. A powerful fully programmable industrial computer was chosen for executing image processing and analysis. Algorithms for defect analysis, which are based on particle analysis, were developed using LabVIEW system design software. The performance of the algorithms was analyzed by analyzing a non-moving image from the scribing line with resolution 960x20 pixel. As a result, the maximum analysis speed was 560 frames per second. Reliability of the algorithm was evaluated by imaging scribing path with a variable number of defects 2000 mm/s when the laser was turned off and image analysis speed was 430 frames per second. The experiment was successful and as a result, the algorithms detected all defects from the scribing path. The final monitoring experiment was performed during a laser process. However, it was challenging to get active laser illumination work with the laser scanner due physical dimensions of the laser lens and the scanner. For reliable error detection, the illumination system is needed to be replaced.

Forsaking all others: towards a new model of nationalism utilizing the case study of former Yugoslavia

Many people would like to believe that nationalism is a thing of the past, a dinosaur belonging to some bygone, uncivilized era. Such a belief is not borne out by recent history, however. Nationalism occupies the political forum with as much force as ever. Yet, in many ways, it remains a mystery to us. The purpose of this study is to explore individual motivations involved in the rise of nationalism, in addition to the role of structural factors. The linkage employed in this exploration is the psychosocial phenomenon of self-identity, including emotions and self-esteem. We demonstrate how individual, socially-constructed self-identity accounts for why some people embrace nationalism while others eschew it. The methodology employed was theoretical and historical analyses of secondary sources and indepth interviews with subjects who had some connection with former Yugoslavia, the country utilized to test the new model. Our analyses yielded the result that current conceptualizations of nationalism from an exclusively macro or micro perspective are unsatisfactory; we require a more comprehensive approach wherein the two perspectives are integrated. Such an integration necessitates a bridge: hence, our new model, which rests on the psychosocial premise, offers a more useful conceptual tool for the understanding of nationalism. We conclude that nationalism is first and foremost a matter relating to individual social self-identity which takes place within a particular context where oppositional forces emerge from structural factors and our membership in a particular group becomes paramount.

Letting go : a self-study utilizing critical literacy as method in improving my practice /

This is a Self-study about my role as a teacher, driven by the question: "How do I improve my practice?" (Whitehead, 1989)? In this study, I explored the discomfort that I had with the way that I had been teaching. Specifically, I worked to uncover the reasons behind my obsessive (mis)management of my students. I wrote of how I came to give my Self permission for this critique: how I came to know that all knowledge is a construction, and that my practice, too, is a construction. I grounded this journey within my experiences. I constructed these experiences in narrative fomi in order to reach a greater understanding of how I came to be the teacher I initially was. I explored metaphors that impacted my practice, re-constructed them, and saw more clearly the assumptions and influences that have guided my teaching. I centred my inquiry into my teaching within an Action Reflection methodology, bon-owing Jack Whitehead's (1989) term to describe my version of Action Research. I relied upon the embedded cyclical pattern of Action Reflection to understand my teaching Self: beginning from a critical moment, reflecting upon it, and then taking appropriate action, and continuing in this way, working to improve my practice. To understand these critical moments, I developed a personal definition of critical literacy. I then tumed this definition inward. In treating my practice as a textual production, I applied critical literacy as a framework in coming to know and understand the construction that is my teaching. I grounded my thesis journey within my Self, positioning my study within my experiences of being a grade 1 teacher struggling to teach critical literacy. I then repositioned my journey to that of a grade 1 teacher struggling to use critical literacy to improve my practice. This journey, then, is about the transition from critical literacyit as-subject to critical literacy-as-instmctional-method in improving my practice. I joumeyed inwards, using a critical moment to build new understandings, leading me to the next critical moment, and continued in this cyclical way. I worked in this meandering yet deliberate way to reach a new place in my teaching: one that is more inclusive of all the voices in my room. I concluded my journey with a beginning: a beginning of re-visioning my practice. In telling the stories of my journey, of my teaching, of my experiences, I changed into the teacher that I am more comfortable with. I've come to the frightening conclusion that I am the decisive element in the classroom. It's my personal approach that creates the climate. It's my daily mood that makes the weather As a teacher, I possess a tremendous power to make a person's life miserable or joyous. I can be a tool of torture or an instrument of inspiration. I can humiliate or humour, hurt or heal. In all situations, it is my response that decides whether a crisis will be escalated or de-escalated and a person humanized or de-humanized. (Ginott, as cited in Buscaglia, 2002, p. 22)

Utilizing a Phenomenological Approach to Examine the Experience of Sexuality for Women Concerned about Urinary Incontinence following Spinal Cord Injury

Sexuality after spinal cord injury (SCI) is a complex issue that is influenced by a number of social, psychological and physiological factors, one of which is urinary incontinence (UI). Using a phenomenological approach, seven mixed methods interviews combining both the interview guide and standardized open-ended approaches were conducted to examine the experience of sexuality for women who are concerned about UI following SCI. Sexual function was one of the top priorities for the women after SCI, and UI was one of the main concerns the women had regarding sexuality. The findings of this study demonstrate that various dimensions of intimacy and the sexual experience as a whole were affected by UI, and the women discussed both physical and psychological concerns. The main issues regarding sexuality included concerns related to relationships, frustrations with limited sexual activities and the difficulty of being sexually satisfied, the number of unanswered questions and concerns, and a fear of being hurt or injured while participating in sexual activities. The main concerns regarding UI were embarrassment, the work and inconvenience involved with the clean-up of UI, bladder infections, the lack of accessible washrooms, and the negative effects of UI medications. When examining sexuality and UI together, the major issues were the constant comparison to the way things were before SCI, as well as the new concerns that the women did not have to worry about previously, worrying about how their partner would react if UI were to occur during sexual activity, and the impact of their own feelings toward UI on sexuality, a connection between pleasurable sexual sensations and UI as well as difficulty differentiating between the sensation of UI with the sensation of UI, dealing with infected urine during sexual activity, having to discuss UI with a new potential sexual partner, and a fear of rejection. Other identified issues included those related to body image, a lack of resources, Doctors who were inadequately educated regarding SCI, and issues related to both having and raising children. There is a significant shortage of information available for women with SCI to use as a resource regarding sexual function in general, and sexual function as it relates to UI. It is necessary that future work focus on creating resources to assist in this area, and that the dissemination of those resources becomes both appropriate and effective. Addressing sexual function and UI which are among the top concerns for this population has the opportunity to greatly improve quality of life (QOL) for these individuals.

The Hygiene Hypothesis and the risk of Crohn’s disease : a case-control study utilizing prospectively-collected exposure data from an administrative database

La maladie de Crohn (MC) pédiatrique a des conséquences majeures sur la qualité de vie des patients atteints (troubles de croissance, absentéisme scolaire, etc). L’étiologie de la MC est inconnue. La théorie de l’hygiène (TH) stipule que les conditions de vie sanitaires des pays industrialisés préviennent l’exposition antigénique et empêchent le développement de la tolérance immunitaire chez les enfants. Ceci mènerait à une réaction excessive du système immunitaire lors d’expositions subséquentes et engendrerait le développement de maladies inflammatoires chroniques telles la MC. Objectif: Analyser l’association entre la fréquence, la temporalité et le type d’infections infantiles (indicateurs d’environnements pourvus d’antigènes) et le risque de MC pédiatrique. Une étude cas-témoin fût réalisée, les cas de MC provenant d’un centre hospitalier tertiaire montréalais. Les témoins, provenant des registres de la Régie d’assurance maladie du Québec (RAMQ), furent appariés aux cas selon leur âge, sexe et lieu de résidence. L’exposition aux infections fût déterminée grâce aux codes de diagnostic ICD-9 inscrits dans la base de données de la RAMQ. Un modèle de régression logistique conditionnelle fût construit afin d’analyser l’association entre infections et MC. Des ratios de cotes (RC) et intervalles de confiance à 95% (IC 95%) furent calculés. Résultats: 409 cas et 1621 témoins furent recrutés. Les résultats de l’analyse suggèrent un effet protecteur des infections infantiles sur le risque de MC (RC: 0,67 [IC: 0,48-0,93], p=0,018), plus particulièrement au cours des 5 premières années de vie (RC: 0.74 [IC: 0,57-0,96], p=0,025). Les infections rénales et urinaires, ainsi que les infections des voies orales et du système nerveux central (virale), semblent particulièrement associées à l’effet protecteur. Les résultats de l’étude appuient la théorie de l’hygiène: l’exposition aux infections infantiles pourrait réduire le risque de MC pédiatrique.

Studies on lipid production of microalgae under mixotrophic growth, utilizing glycerol as a carbon source, combined with nitrogen starvation

Rampant increases in oil prices and detrimental effects of fossil fuels on the environment have been the main impetus for the development of environmentally friendly and sustainable energy sources. Amongst the many possibilities, microalgae have been proposed as a new alternative energy source to fossil fuels, as their growth is both sustainable and ecologically safe. By definition, microalgae are unicellular photosynthetic microorganisms containing chlorophyll a. These organisms are capable of producing large quantities of oils, surpassing that of traditional oil-seed crops, which can be transformed, through chemical processes, into biofuels such as biodiesel or bio-gasoline. Thus, recent research has gone into discovering high lipid producing algal strains, optimising growth media for increased lipid production and developing metabolic engineering to make microalgae a source of biofuel that is competitive to more traditional sources of biofuel and even to fossil fuel. In this context, the research reported here focused on using a mixotrophic growth mode as a way to increase lipid production for certain strains of microalgae. In addition, nitrogen starvation combined with mixotrophy was studied to analyse its effects on lipid production. Mixotrophy is the parallel usage of two trophic modes, in our case photoautotrophy and heterotrophy. Consequently, 12 algal strains were screened for mixotrophic growth, using glycerol as a carbon source. Glycerol is a waste product of the current biodiesel industry; it is a cheap and abundant carbon source present in many metabolic pathways. From this initial screening, several strains were chosen for subsequent experiments involving nitrogen starvation. Nitrogen starvation has been shown to induce lipid accumulation. The results obtained show that a mixotrophic growth mode, using glycerol as a carbon source, enhances lipid production for certain strains. Moreover, lipid enhancement was shown for nitrogen starvation combined with mixotrophic growth mode. This was dependant on time spent under nitrogen starvation and on initial concentrations of the nitrogen source.

Rice Hull Ash as Filler in Microcellular Soles

Fully burnt rice hull (rice hull ash) was tried as a low cost filler in place of precipitated silica in NBR/PVC based microcellular soles. The mechanical properties of the soles containing silica and ash are found to be comparable. The expansion is marginally higher in the presence of ash, which permits to reduce the amount of blowing agent. Cell structure of microcellular sheets remains unchanged when silica is replaced by ash.

Line of Brillouin-Erbium Fiber Laser Utilizing a Fabry-Perot Cavity in L-band

In this paper, the generation of a multiwavelength laser source from a Brillouin -Erbium fiber laser in the long wavelength band (L-band) region is experimentally demonstrated. The proposed laser system utilizes a Fabrv-Perot cavity formed by fiber-loop mirrors. Twenty-four lines of Brillouin-Stokes with line spacings of 10 GHz are obtained in the L-band region

Microbial enzyme production utilizing banana wastes

A critical survey of the fruits and vegetable markets of the towns and cities in South India reveals that banana fruit stalk wastes share a dominant proportion among the solid wastes generated. In the light of the review of literature presented in the foregoing section, few reports are available on the utilisation of banana waste for the production of alcoholic beverages, biogas, and single cell protein. However, it is not yet tried for the production of industrial enzymes. Moreover, preliminary fermentation studies conducted under uncontrolled conditions revealed that banana fruit stalk could be aptly utilised as solid substrate? for the industrial production of microbial amylases and cellulases at a cheaper cost. Therefore, it was proposed to conduct a detailed study towards the development of a suitable fermentation process for the production of industrial enzymes using banana fruit stalk wastes, which is rich in carbohydrate, as solid substrate, employing bacteria, under SSF.

Palladium Catalyzed Carbon-Carbon/Carbonheteroatom Bond Formation Reactions Utilizing Pentafulvene Derived Bicyclic Hydrazines

The reactions involving fulvenes and its derivatives have received a great deal of attention over the years in synthetic organic chemistry. Functionalizations of fulvenes provide versatile and powerful approaches to various polycyclic systems and natural products. They serve as versatile intermediates in the construction of various ring systems through inter- as well as intramolecular cycloadditions. Compared to the rich literature on the cycloaddition reactions of pentafulvenes, much less attention has been paid to the synthetic utilization of their cycloadducts. Tactical manipulations on the chosen adduct offer the prospects for designing a variety of useful molecular skeletons. Addition of heterodienophiles to fulvenes offers an efficient strategy towards the synthesis of azabicyclic olefins. However, there have been no serious attempts to study the synthetic utility of these substrates. In this context and with the intention of utilizing pentafulvenes towards synthetically important molecules, author decided to explore the reactivity of pentafulvene derived azabicyclic olefins. Our attention was focused on the synthetic potential associated with the ring opening of fulvene derived bicyclic hydrazines under palladium catalysis. It was envisioned that the desymmetrization of these adducts using various soft nucleophiles will provide a novel access to synthetically and biologically important alkylidene cyclopentenes. The investigations along this line form the focal theme of this thesis entitled “PALLADIUM CATALYZED CARBONCARBON/ CARBON-HETEROATOM BOND FORMATION REACTIONS UTILIZING PENTAFULVENE DERIVED BICYCLIC HYDRAZINES

Reactive pozzolanas from rice husk ash: An alternative to cement for rural housing

This paper discusses the properties of rice husk ash samples produced from different types of field ovens to compare the performance of the ovens and to identify the most feasible method to produce a reactive pozzolana as an alternative to cement for building applications requiring lower strengths. Different types of ashes are produced and long-term strength of rice husk ash pozzolanas with lime or cement is investigated to suggest a sustainable affordable option in rural building applications, especially for rural housing in Kerala, a southern state of India

Mechanical Properties of Rice Husk Ash (RHA) - High strength Concrete

High strength and high performance concrete are being widely used all over the world. Most of the applications of high strength concrete have been found in high rise buildings, long span bridges etc. The potential of rice husk ash as a cement replacement material is well established .Earlier researches showed an improvement in mechanical properties of high strength concrete with finely ground RHA as a partial cement replacement material. A review of literature urges the need for optimizing the replacement level of cement with RHA for improved mechanical properties at optimum water binder ratio. This paper discusses the mechanical properties of RHA- High strength concrete at optimized conditions

Rice husk ash – A valuable reinforcement for high density polyethylene

This paper presents the results of a study on the use of rice husk ash (RHA) for property modification of high density polyethylene (HDPE). Rice husk is a waste product of the rice processing industry. It is used widely as a fuel which results in large quantities of RHA. Here, the characterization of RHA has been done with the help of X-ray diffraction (XRD), Inductively Coupled Plasma Atomic Emission Spectroscopy (ICPAES), light scattering based particle size analysis, Fourier transform infrared spectroscopy (FTIR) and Scanning Electron Microscope (SEM). Most reports suggest that RHA when blended directly with polymers without polar groups does not improve the properties of the polymer substantially. In this study RHA is blended with HDPE in the presence of a compatibilizer. The compatibilized HDPE-RHA blend has a tensile strength about 18% higher than that of virgin HDPE. The elongation-at-break is also higher for the compatibilized blend. TGA studies reveal that uncompatibilized as well as compatibilized HDPERHA composites have excellent thermal stability. The results prove that RHA is a valuable reinforcing material for HDPE and the environmental pollution arising from RHA can be eliminated in a profitable way by this technique.

HDPE-Ash Nanocomposites

Ash-based polymer composites are assuming increasing importance because of the pollutant potential, fine particle size, and low price of ash. Fly ash and rice husk ash are two prominent ash materials on which some investigations have already been done for potential use in polymer composites. This article highlights the results of a study on the use of wood ash in HDPE. Wood ash is mainly a mixture of various metallic compounds and some silica. Here, the characterization of wood ash has been done with the help of XRD, ICPAES, light scattering based particle size analysis, FTIR, and SEM. The results show that wood ash particle size has an average value of 293 nm, much lower than other categories of ash. When blended with HDPE in the presence of a compatibilizer, wood ash gives rise to vastly improved mechanical properties over that of the base polymer. The results prove that wood ash is a valuable reinforcing material for HDPE and the environmental pollution due to wood ash can be solved in a most profitable way by this technique.