Al based ultra-fine eutectic with high room temperature plasticity and elevated temperature strength

Developments of aluminum alloys that can retain strength at and above 250 degrees C present a significant challenge. In this paper we report an ultrafine scale Al-Fe-Ni eutectic alloy with less than 3.5 aa transition metals that exhibits room temperature ultimate tensile strength of similar to 400 MPa with a tensile ductility of 6-8%. The yield stress under compression at 300 degrees C was found to be 150 MPa. We attribute it to the refinement of the microstructure that is achieved by suction casting in copper mold. The characterization using scanning and transmission electron microscopy (SEM and TEM) reveals an unique composite structure that contains the Al-Al3Ni rod eutectic with spacing of similar to 90 nm enveloped by a lamellar eutectic of Al-Al9FeNi (similar to 140 nm). Observation of subsurface deformation under Vickers indentation using bonded interface technique reveals the presence of extensive shear banding during deformation that is responsible for the origin of ductility. The dislocation configuration in Al-Al3Ni eutectic colony indicates accommodation of plasticity in alpha-Al with dislocation accumulation at the alpha-Al/Al3Ni interface boundaries. In contrast the dislocation activities in the intermetallic lamellae are limited and contain set of planner dislocations across the plates. We present a detailed analysis of the fracture surface to rationalize the origin of the high strength and ductility in this class of potentially promising cast alloy. (C) 2015 Elsevier B.V. All rights reserved.

Surface-induced melting of metal nanoclusters

We investigate the size effect on melting of metal nanoclusters by molecular dynamics simulation and thermo dynamic theory based on Kofman's melt model. By the minimization of the free energy of metal nanoclusters with respect to the thickness of the surface liquid layer, it has been found that the nanoclusters of the same metal have the same premelting temperature T-pre = T-0 - T-0(gamma(su) - gamma(lv) - gamma(sl))/(rhoLxi) (T-0 is the melting point of bulk metal, gamma(sv) the solid-vapour interfacial free energy, gamma(sl) the liquid-vapour interfacial free energy, gamma(sl),l the solid-liquid interfacial free energy, p the density of metal, L the latent heat of bulk metal, and xi the characteristic length of surface-interface interaction) to be independent of the size of nanoclusters, so that the characteristic length of a metal can be obtained easily by T-pre, which can be obtained by experiments or molecular dynamics (MD) simulations. The premelting temperature T-pre of Cu is obtained by AID simulations, then xi is obtained. The melting point T-cm is further predicted by free energy analysis and is in good agreement with the result of our MD simulations. We also predict the maximum premelting-liquid width of Cu nanoclusters with various sizes and the critical size, below which there is no premelting.

Synthetic, structural and mechanistic studies of interactions of carbon, nitrogen, and oxygen nucleophiles with bis-pentamethylcyclopentadienyl zirconium and hafnium derivatives

The reactivity of permethylzirconocene and permethylhafnocene complexes with various nucleophiles has been investigated. Permethylzirconocene reacts with sterically hindered ketenes and allenes to afford metallacycle products. Reaction of these cummulenes with permethylzirconocene hydride complexes affords enolate and σ-allyl species, respectively. Reactions which afford enolate products are nonstereospecific, whereas reactions which afford allyl products initially give a cis-σ-allyl complex which rearranges to its trans isomer. The mechanism of these reactions is proposed to occur either by a Lewis Acid-Lewis Base interaction (ketenes) or by formation of a π-olefin intermediate (allenes).

Permethylzirconocene haloacyl complexes react with strong bases such as lithium diisopropylamide or methylene trimethylphosphorane to afford ketene compounds. Depending on the size of the alkyl ketene substituent, the hydrogenation of these compounds affords enolate-hydride products with varying degrees of stereoselectivity. The larger the substituent, the greater is the selectivity for cis hydrogenation products.

The reaction of permethylzirconocene dihydride and permethylhafnocene dihydride with methylene trimethylphosphorane affords methyl-hydride and dimethyl derivatives. Under appropriate conditions, the metallated-ylide complex 1, (η^5-C_5(CH_3)_5)_2 Zr(H)CH_2PMe_2CH_2, is also obtained and has been structurally characterized by X-ray diffraction techniques. Reaction of 1 with CO affords (η^5-C_5(CH_3)_5)_2 Zr(C,O-η^2 -(PMe_3)HC=CO)H which exists in solution as an equilibrium mixture of isomers. In one isomer (2), the η^2-acyl oxygen atom occupies a lateral equatorial coordination position about zirconium, whereas in the other isomer (3), the η-acyl oxygen atom occupies the central equatorial position. The equilibrium kinetics of the 2→3 isomerization have been studied and the structures of both complexes confirmed by X-ray diffraction methods. These studies suggest a mechanism for CO insertion into metal-carbon bonds of the early transition metals.

Permethylhafnocene dihydride and permethylzirconocene hydride complexes react with diazoalkanes to afford η^2-N, N' -hydrazonido species in which the terminal nitrogen atom of the diazoalkane molecule has inserted into a metal-hydride or metal-carbon bond. The structure of one of these compounds, Cp*_2Zr(NMeNCTol_2)OH, has been determined by X-ray diffraction techniques. Under appropriate conditions, the hydrazonido-hydride complexes react with a second equivalent of diazoalkene to afford η' -N-hydrazonido-η^2-N, N' -hydrazonido species.

Reactions of small molecules facilitated by metal-acceptor interactions

The role of metal-acceptor interactions arising from M–BR3 and M–PR3 bonding is discussed with respect to reactions between first-row transition metals and N2, H2, and CO. Thermally robust, S = 1/2 (TPB)Co(H2) and (TPB)Co(N2) complexes (TPB = tris(2- (diisopropylphosphino)phenyl)borane) are described and the energetics of N2 and H2 binding are measured. The H2 and N2 ligands are bound more weakly in the (TPB)Co complexes than in related (SiP3)M(L) complexes (SiP3 = tris(2- (diisopropylphosphino)phenyl)silyl). Comparisons within and between these two ligand platforms allow for the factors that affect N2 (and H2) binding and activation to be delineated. The characterization and reactivity of (DPB)Fe complexes (DPB = bis(2- (diisopropylphosphino)phenyl)phenylborane) in the context of N2 functionalization and E–H bond addition (E = H, C, N, Si) are described. This platform allows for the one-pot transformation of free N2 to an Fe hydrazido(-) complex via an Fe aminoimide intermediate. The principles learned from the N2 chemistry using (DPB)Fe are applied to CO reduction on the same system. The preparation of (DPB)Fe(CO)2 is described as well as its reductive functionalization to generate an unprecedented Fe dicarbyne. The bonding in this highly covalent complex is discussed in detail. Initial studies of the reactivity of the Fe dicarbyne reveal that a CO-derived olefin is released upon hydrogenation. Alternative approaches to uncovering unusual reactivity using metal- acceptor interactions are described in Chapters 5 and 6, including initial studies on a new π-accepting tridentate diphosphinosulfinyl ligand and strategies for designing ligands that undergo site-selective metallation to generate heterobimetallic complexes.

Carbon-carbon bond forming reactions from bis(carbene)-platinum(II) complexes and olefin polymerization and oligomerization using group 4 post-metallocene complexes

A long-standing challenge in transition metal catalysis is selective C–C bond coupling of simple feedstocks, such as carbon monoxide, ethylene or propylene, to yield value-added products. This work describes efforts toward selective C–C bond formation using early- and late-transition metals, which may have important implications for the production of fuels and plastics, as well as many other commodity chemicals.

The industrial Fischer-Tropsch (F-T) process converts synthesis gas (syngas, a mixture of CO + H₂) into a complex mixture of hydrocarbons and oxygenates. Well-defined homogeneous catalysts for F-T may provide greater product selectivity for fuel-range liquid hydrocarbons compared to traditional heterogeneous catalysts. The first part of this work involved the preparation of late-transition metal complexes for use in syngas conversion. We investigated C–C bond forming reactions via carbene coupling using bis(carbene)platinum(II) compounds, which are models for putative metal–carbene intermediates in F-T chemistry. It was found that C–C bond formation could be induced by either (1) chemical reduction of or (2) exogenous phosphine coordination to the platinum(II) starting complexes. These two mild methods afforded different products, constitutional isomers, suggesting that at least two different mechanisms are possible for C–C bond formation from carbene intermediates. These results are encouraging for the development of a multicomponent homogeneous catalysis system for the generation of higher hydrocarbons.

A second avenue of research focused on the design and synthesis of post-metallocene catalysts for olefin polymerization. The polymerization chemistry of a new class of group 4 complexes supported by asymmetric anilide(pyridine)phenolate (NNO) pincer ligands was explored. Unlike typical early transition metal polymerization catalysts, NNO-ligated catalysts produce nearly regiorandom polypropylene, with as many as 30-40 mol % of insertions being 2,1-inserted (versus 1,2-inserted), compared to <1 mol % in most metallocene systems. A survey of model Ti polymerization catalysts suggests that catalyst modification pathways that could affect regioselectivity, such as C–H activation of the anilide ring, cleavage of the amine R-group, or monomer insertion into metal–ligand bonds are unlikely. A parallel investigation of a Ti–amido(pyridine)phenolate polymerization catalyst, which features a five- rather than a six-membered Ti–N chelate ring, but maintained a dianionic NNO motif, revealed that simply maintaining this motif was not enough to produce regioirregular polypropylene; in fact, these experiments seem to indicate that only an intact anilide(pyridine)phenolate ligated-complex will lead to regioirregular polypropylene. As yet, the underlying causes for the unique regioselectivity of anilide(pyridine)phenolate polymerization catalysts remains unknown. Further exploration of NNO-ligated polymerization catalysts could lead to the controlled synthesis of new types of polymer architectures.

Finally, we investigated the reactivity of a known Ti–phenoxy(imine) (Ti-FI) catalyst that has been shown to be very active for ethylene homotrimerization in an effort to upgrade simple feedstocks to liquid hydrocarbon fuels through co-oligomerization of heavy and light olefins. We demonstrated that the Ti-FI catalyst can homo-oligomerize 1-hexene to C₁₂ and C₁₈ alkenes through olefin dimerization and trimerization, respectively. Future work will include kinetic studies to determine monomer selectivity by investigating the relative rates of insertion of light olefins (e.g., ethylene) vs. higher α-olefins, as well as a more detailed mechanistic study of olefin trimerization. Our ultimate goal is to exploit this catalyst in a multi-catalyst system for conversion of simple alkenes into hydrocarbon fuels.

Chain-forming zintl antimonides as novel thermoelectric materials

Zintl phases, a subset of intermetallic compounds characterized by covalently-bonded "sub-structures," surrounded by highly electropositive cations, exhibit precisely the characteristics desired for thermoelectric applications. The requirement that Zintl compounds satisfy the valence of anions through the formation of covalent substructures leads to many unique, complex crystal structures. Such complexity often leads to exceptionally low lattice thermal conductivity due to the containment of heat in low velocity optical modes in the phonon dispersion. To date, excellent thermoelectric properties have been demonstrated in several Zintl compounds. However, compared with the large number of known Zintl phases, very few have been investigated as thermoelectric materials.

From this pool of uninvestigated compounds, we selected a class of Zintl antimonides that share a common structural motif: anionic moieties resembling infinite chains of linked MSb₄ tetrahedra, where $M$ is a triel element. The compounds discussed in this thesis (A₅M₂Sb₆ and A₃MSb₃, where A = Ca or Sr and M = Al, Ga and In) crystallize as four distinct, but closely related "chain-forming" structure types. This thesis describes the thermoelectric characterization and optimization of these phases, and explores the influence of their chemistry and structure on the thermal and electronic transport properties. Due to their large unit cells, each compound exhibits exceptionally low lattice thermal conductivity (0.4 - 0.6 W/mK at 1000 K), approaching the predicted glassy minimum at high temperatures. A combination of Density Functional calculations and classical transport models were used to explain the experimentally observed electronic transport properties of each compound. Consistent with the Zintl electron counting formalism, A₅M₂Sb₆ and A₃MSb₃ phases were found to have filled valence bands and exhibit intrinsic electronic properties. Doping with divalent transition metals (Zn²⁺ and Mn²⁺) on the M³⁺ site, or Na¹⁺ on the A³⁺ site allowed for rational control of the carrier concentration and a transition towards degenerate semiconducting behavior. In optimally-doped samples, promising peak zT values between 0.4 and 0.9 were obtained, highlighting the value of continued investigations of complex Zintl phases.

Reactions of platinum(II) complexes with dioxygen: progress toward alkane functionalization

Whereas stoichiometric activation of C-H bonds by complexes of transition metals is becoming increasingly common, selective functionalization of alkanes remains a formidable challenge in organometallic chemistry. The recent advances in catalytic alkane functionalization by transition-metal complexes are summarized in Chapter I.

The studies of the displacement of pentafluoropyridine in [(tmeda)Pt(CH_3)(NC_5F_5)][BAr^f_4] (1) with γ- tetrafluoropicoline, a very poor nucleophile, are reported in Chapter II. The ligand substitution occurs by a dissociative interchange mechanism. This result implies that dissociative loss of pentafluoropyridine is the rate-limiting step in the C-H activation reactions of 1.

Oxidation of dimethylplatinum(II) complexes (N-N)Pt(CH_3)_2 (N-N = tmeda(1), α-diimines) by dioxygen is described in Chapter III. Mechanistic studies suggest a two-step mechanism. First, a hydroperoxoplatinum(IV) complex is formed in a reaction between (N-N)Pt(CH_3)_2 and dioxygen. Next, the hydroperoxy complex reacts with a second equivalent of (N-N)Pt(CH_3)_2 to afford the final product, (N-N)Pt(OH)(OCH_3)(CH_3)_2. The hydroperoxy intermediate, (tmeda)Pt(OOH)(OCH_3)(CH_3)_2 (2), was isolated and characterized. The reactivity of 2 with several dime thylplatinum(II) complexes is reported.

The studies described in Chapter IV are directed toward the development of a platinum(II)-catalyzed oxidative alkane dehydrogenation. Stoichiometric conversion of alkanes (cyclohexane, ethane) to olefins (cyclohexene, ethylene) is achieved by C-H activation with [(N-N)Pt(CH_3)(CF_3CH_2OH)]BF_4 (1, N-N is N,N'-bis(3,5-di-t- butylphenyl)-1,4-diazabutadiene) which results in the formation of olefin hydride complexes. The first step in the C-H activation reaction is formation of a platinum(II) alkyl which undergoes β-hydrogen elimination to afford the olefin hydride complex. The cationic ethylplatinum(II) intermediate can be generated in situ by treating diethylplatinum(II) compounds with acids. Treatment of (phen)PtEt_2 with [H(OEt_2)_2]Bar^f_4 at low temperatures resulted in the formation of a mixture of [(phen)PtEt(OEt_2)]Bar^f_4 (8) and [(phen)Pt(C_2H_4)H] Bar^f_4 (7). The cationic olefin complexes are unreactive toward dioxygen or hydrogen peroxide. Since the success of the overall catalytic cycle depends on our ability to oxidize the olefin hydride complexes, a series of neutral olefin complexes of platinum(II) with monoanionic ligands (derivatives of pyrrole-2-carboxyaldehyde N-aryl imines) was prepared. Unfortunately, these are also stable to oxidation.

High pressure states in condensed matter: I. High pressure behavior of the iron-sulphur system with applications to the earth's core. II. Empirical equation of state for organic compounds at high pressures

Part I:

The earth's core is generally accepted to be composed primarily of iron, with an admixture of other elements. Because the outer core is observed not to transmit shear waves at seismic frequencies, it is known to be liquid or primarily liquid. A new equation of state is presented for liquid iron, in the form of parameters for the 4th order Birch-Murnaghan and Mie-Grüneisen equations of state. The parameters were constrained by a set of values for numerous properties compiled from the literature. A detailed theoretical model is used to constrain the P-T behavior of the heat capacity, based on recent advances in the understanding of the interatomic potentials for transition metals. At the reference pressure of 10⁵ Pa and temperature of 1811 K (the normal melting point of Fe), the parameters are: ρ = 7037 kg/m³, K_S0 = 110 GPa, K_S' = 4.53, K_S" = -.0337 GPa-1, and γ = 2.8, with γ α ρ^-1.17. Comparison of the properties predicted by this model with the earth model PREM indicates that the outer core is 8 to 10 % less dense than pure liquid Fe at the same conditions. The inner core is also found to be 3 to 5% less dense than pure liquid Fe, supporting the idea of a partially molten inner core. The density deficit of the outer core implies that the elements dissolved in the liquid Fe are predominantly of lower atomic weight than Fe. Of the candidate light elements favored by researchers, only sulfur readily dissolves into Fe at low pressure, which means that this element was almost certainly concentrated in the core at early times. New melting data are presented for FeS and FeS₂ which indicate that the FeS₂ is the S-hearing liquidus solid phase at inner core pressures. Consideration of the requirement that the inner core boundary be observable by seismological means and the freezing behavior of solutions leads to the possibility that the outer core may contain a significant fraction of solid material. It is found that convection in the outer core is not hindered if the solid particles are entrained in the fluid flow. This model for a core of Fe and S admits temperatures in the range 3450K to 4200K at the top of the core. An all liquid Fe-S outer core would require a temperature of about 4900 K at the top of the core.

Part II.

The abundance of uses for organic compounds in the modern world results in many applications in which these materials are subjected to high pressures. This leads to the desire to be able to describe the behavior of these materials under such conditions. Unfortunately, the number of compounds is much greater than the number of experimental data available for many of the important properties. In the past, one approach that has worked well is the calculation of appropriate properties by summing the contributions from the organic functional groups making up molecules of the compounds in question. A new set of group contributions for the molar volume, volume thermal expansivity, heat capacity, and the Rao function is presented for functional groups containing C, H, and O. This set is, in most cases, limited in application to low molecular liquids. A new technique for the calculation of the pressure derivative of the bulk modulus is also presented. Comparison with data indicates that the presented technique works very well for most low molecular hydrocarbon liquids and somewhat less well for oxygen-bearing compounds. A similar comparison of previous results for polymers indicates that the existing tabulations of group contributions for this class of materials is in need of revision. There is also evidence that the Rao function contributions for polymers and low molecular compounds are somewhat different.

Remoção de compostos sulfurados e nitrogenados de diesel hidrotratado por adsorção em argila, alumina e sílica-alumina, impregnadas com metais de transição

Na matriz energética brasileira, o óleo diesel tem lugar de destaque, porém ainda é comercializado com teores de compostos sulfurados e nitrogenados considerados altos para as legislações ambientais que entrarão em vigor nos próximos anos. Tradicionalmente, a remoção desses compostos de enxofre de correntes de petróleo é realizada por processos de hidrotratamento (HDT). No entanto, devido as características do diesel brasileiro, se faz necessária maior severidade para atingir as novas especificações dos combustíveis. Isto implica em investimentos e custos operacionais crescentes para atender a demanda que se instala. Neste contexto, a adsorção está sendo estudada para a purificação da corrente de óleo diesel oriunda da etapa de hidrotratamento como polimento final para alcançar as especificações mais exigentes. Sabe-se que os adsorventes comerciais apresentam limitações na remoção destes contaminantes e uma alternativa que tem se mostrado promissora é a incorporação de metais de transição na estrutura do sólido. No presente trabalho foram modificados adsorventes comerciais, tais como aluminas, sílica-aluminas e argilas pela introdução dos elementos níquel, colbalto e molibdênio e testado o desempenho dessas modificações frente à adsorção de compostos sulfurados e nitrogenados presentes em um diesel hidrotratado. Foram feitas caracterizações químicas, físicas, texturais e morfológicas dos sólidos com e sem incorporação de metais de transição na estrutura original. Os experimentos de adsorção foram realizados a 40C. Avaliando todos os sólidos, o adsorvente que mostrou o melhor desempenho na remoção de compostos sulfurados e nitrogenados por massa de adsorvente foi a sílica-alumina sem modificações, que foi capaz de remover em torno de 90% de compostos nitrogenados e 55 % de sulfurados para 2 g de sólido / 10 mL de diesel. Para os materiais modificados, observou-se que a incorporação dos metais de transição ocasionou redução da sua área superficial e do volume total de poros. Desta maneira, os efeitos esperados pelas interações entre o sítios metálicos e os compostos de nitrogênio e enxofre foram reduzidos

Síntese e estudo das propriedades luminescentes do SrGa2O4 dopado com íons de Cr3+

Amostras policristalinas de Sr(Ga1-xCrx)2O4 com x = 0,01 foram estequiometricamente preparadas pela mistura dos materiais em pó SrCO3, Ga2O3 e Cr2O3. A estrutura cristalina da amostra dopada foi analisada pelas medidas de difração de raios-X. O padrão de difração revelou uma única fase relacionada a fase monoclínica do SrGa2O4. Os dados foram ajustados usando o Método de Rietveld para refinamento de estruturas e os parâmetros da rede foram determinados. A luminescência do íon de Cr3+ na rede do SrGa2O4 foi investigada pelas espectroscopias de excitação e emissão a temperatura ambiente, através das quais verificamos que os íons de Cr3+ estão localizados em dois sítios diferentes. Os espectros de emissão apresentam bandas largas associadas à transição eletrônica 4T2(4F) → 4A2(4F) para ambos os sítios. Estes resultados são analisados pela teoria de campo cristalino e o parâmetro de campo cristalino Dq e os parâmetros de Racah B e C são determinados pelas posições das bandas de excitação. A partir destes parâmetros determinamos um campo cristalino forte para ambos os sítios. Além disto, foram realizadas medidas de espectroscopia fotoacústica que confirmaram as transições identificadas e estimadas nos espectros de excitação.

高硅氧发光玻璃的制备及其荧光性能

abstract {Silica glass is an attractive host matrix for the emission ions of rare earth and transition metal ions because it has small thermal expansion coefficient, strong thermal resistance, large fracture strength and good chemical durability and so on. However, a major obstacle to using it as the host matrix is a phenomenon of concentration quenching. In this paper, we introduces a novel method to restrain the concentration quenching by using a porous glass with SiO₂ content > 95% (in mass) and prepare intense fluorescence high-SiO₂ glasses and high-SiO₂ laser glass. The porous glass with high-SiO₂ content was impregnated with rare-earth and transition metal ions, and consequently sintered into a compact non-porous glass in reduction or oxidization atmospheres. Various intense fluorescence glasses with high emission yields, a vacuum ultraviolet-excited intensely luminescent glass, high silica glass containing high concentration of Er³⁺ ion, ultrabroad infrared luminescent Bi-doped high silica glass and Nd³⁺-doped silica microchip laser glass were obtained by this method. The porous glass is also favorable for co-impregnating multi-active-ions. It can bring effective energy transferring between various active ions in the glass and increases luminescent intensity and extend range of excitation spectrum. The luminescent active ions-doped high-SiO₂ glasses are potential host materials for high power solid-state lasers and new transparent fluorescence materials.}

Efeito da 1,10-fenantrolina e seus derivados complexados em metal na atividade proteolítica de Leishmania braziliensis

Leishmanioses são um grupo de doenças com um largo espectro de manifestações clínicas, as quais variam desde lesões cutâneas até o envolvimento visceral severo, podendo levar ao óbito. A leishmaniose é, ainda hoje, uma doença negligenciada, estando entre os agravos prioritários do programa de pesquisa sobre doenças da pobreza da Organização Mundial da Saúde (OMS). Além de não haver vacinas disponíveis, a terapia é baseada em medicamentos injetáveis que causam sérios efeitos colaterais, tornando o tratamento inviável para muitos países endêmicos. Drogas derivadas de metal representam um novo arsenal terapêutico antimicrobiano e anti-câncer. Os inibidores de peptidase/agentes quelantes tais como 1,10-fenantrolina e seus derivados, no estado livre de metal ou como ligantes com metais de transição, interferem com a função de vários sistemas biológicos. Em trabalhos anteriores, nosso grupo descreveu que o parasito L. braziliensis produziu moléculas gp63 sensíveis a 1,10-fenantrolina. No presente trabalho, demonstramos a distribuição celular da molécula gp63 em uma cepa virulenta de L. braziliensis por meio de análises bioquímicas e imuno-histoquímica. Depois disso, relatamos os efeitos inibitórios de três compostos derivados da 1,10-fenantrolina, 1,10-fenantrolina-5,6-diona (phendio), [Cu(phendio)2] e [Ag(phendio)2], nas atividades metalopeptidases celulares e extracelulares produzidas por promastigotas de L. braziliensis, bem como as suas ações sobre a viabilidade do parasita e na interação com as células de macrófagos murinos. As moléculas gp63 foram detectadas em compartimentos de parasitos, incluindo membrana citoplasmatica e bolsa flagelar. O tratamento de promastigotas de L. braziliensis durante 1 hora com 1,10-fenantrolina e seus derivados resultou numa inibição significativa da viabilidade celular e mostrou um mecanismo de ação irreversível. Estes inibidores de metalopeptidases induziram apoptose em promastigotas de L. braziliensis, demonstrada através da marcação com anexina/iodeto de propídio e ensaio TUNEL. O pré-tratamento de promastigotas com os inibidores de metalopeptidases induziram uma diminuição na expressão de moléculas de superfície gp63, assim como uma redução significativa no índice de associação com macrófagos. Em paralelo, macrófagos infectados com L. braziliensis e tratados com 1,10-fenantrolina e seus derivados promoveram uma potente redução sobre o número de amastigotas intracelulares. O tratamento de macrófagos com 1,10-fenantrolina e seus derivados não induziram o aumento de óxido nítrico. A ação combinatória sobre a capacidade de crescimento entre os compostos derivados da 1,10-fenantrolina e Glucantime, quando ambos foram utilizados em concentracões sub-inibidoras, também foi observada. In vivo os compostos derivados da 1,10-fenantrolina e seus drivados foram capazes de controlar o tamanho das lesões a partir da terceira semana de tratamento em relação ao controle não tratado em hamsters infectados quando administrado por via intraperitoneal. Os animais tratados com os compostos apresentaram maior resposta intradérmica (DTH) aos antígenos de L. braziliensis. Coletivamente, a 1,10-fenantrolina e seus derivados metálicos apresentam uma nova perspectiva de estudos para o desenvolvimento de novos fármacos anti-L. braziliensis

Um problema de interferências quânticas: segregação de impurezas em sistemas metálicos nanoestruturados

Neste trabalho estudamos o problema da segregação de impurezas substitucionais em sistemas nanoestruturados metálicos formados pela justaposição de camadas (multicamadas). Utilizamos o modelo de ligações fortes (tight-binding) com um orbital por sítio para calcular a estrutura eletrônica desses sistemas, considerando a rede cristalina cubica simples em duas direções de crescimento: (001) e (011). Devido à perda de simetria do sistema, escrevemos o hamiltoniano em termos de um vetor de onda k, paralelo ao plano, e um ındice l que denota um plano arbitrario do sistema. Primeiramente, calculamos a estrutura eletrônica do sistema considerando-o formado por átomos do tipo A e, posteriormente, investigamos as modificações nessa estrutura eletrônica ao introduzirmos uma impureza do tipo B em um plano arbitrário do sistema. Calculamos o potencial introduzido por esta impureza levando-se em conta a neutralidade de carga através da regra de soma de Friedel. Calculamos a variação da energia eletrônica total ΔEl como função da posição da impureza. Como substrato, consideramos sistemas com ocupações iguais a 0.94 e 0.54 elétrons por banda, o que dentro do modelo nos permite chamá-los de Nie Cr. As impurezas sao tambem metais de transição - Mn, Fee Co. Em todos os casos investigados, foi verificado que a variação de energia eletrônica total apresenta um comportamento oscilatorio em função da posição da impureza no sistema, desde o plano superficial, até vários planos interiores do sistema. Como resultado, verificamos a ocorrencia de planos mais favoráveis à localização da impureza. Ao considerarmos um número relativamente grande de planos, um caso em particular foi destacado pelo aparecimento de um batimentono comportamento oscilatório de ΔEl. Estudamos também o comportamento da variação da energia total, quando camadas (filmes) são crescidas sobre o substrato e uma impureza do mesmo tipo das camadas é colocada no substrato. Levamos em conta a diferença de tamanho entre os átomos do substrato e os átomos dos filmes. Analisamos ainda a influência da temperatura sobre o comportamento oscilatório da energia total, considerando a expansão de Sommerfeld.

Caracterização óptica e estrutural de materiais isolantes dopados com metais de transição do grupo do ferro

O objetivo deste trabalho foi a investigação das propriedades ópticas e estruturais de materiais isolantes contendo metais de transição do grupo do ferro como impurezas substitucionais. As técnicas usadas para o estudo de amostras MgGa2O4, MgGa2O4 + B- Ga2O3 e ZnGa2O4 dopadas com Cr3+e Fe3+ foram: fotoluminescência, excitação, difração de raios-X, espalhamento de nêutrons, método de Rietveld para o refinamento da estrutura e espectroscopia fotoacústica. Estas técnicas permitem a determinação da coordenação do sítio impureza, a atribuição das transições de energia, o cálculo dos parâmetros de energia e a determinação de propriedades cristalográficas. As amostras apresentam largas bandas de energia nas regiões do visível e do infravermelho. Estas transições indicam a relevância deste estudo pelo interesse tecnológico na obtenção de novos materais com bandas sintonizáveis. No primeiro capítulo apresentamos uma introdução à teoria de campo cristalino. No segundo capítulo apresentamos medidas de fotoluminescência e excitação do MgGa2O4 dopado com 0,1, 0,5, 1,0 e 5,0 % de Cr3+ a 77 K e temperatura ambiente. No terceiro capítulo usamos fotoluminescência, excitação, espalhamento de nêutrons, difração de raios X, fotoacústica e método de refino de Rietveld para analisar o sistema MgGa2O4 + B-Ga2O3 contendo 0,1, 0,5, 1,0 e 5,0 % de Cr3+. No quarto capítulo mostramos resultados de fotoacústica para o ZnGa2O4 dopado com 5% e 10% de Fe3+.

稀土元素与过渡金属元素的溶剂萃取与树脂吸附研究

该论文围绕金属元素的溶剂萃取和树脂吸附进行了一系列研究.考察了几种萃取剂的混合体系对稀土元素及过渡金属元素的萃取效应,同时,研究了酸性有机磷(瞬)类萃淋树脂对二价过渡金属元素的吸附性能,并讨论了它们用于分离金属元素的可能性.1.研究了盐酸和硝酸介质中β-二酮类萃取剂HPMBP与硫代中性有机磷(膦)类萃取剂Cyanex471X单独及混合体系对稀土元素La(Ⅲ)的萃取机理.2.研究了Cyanex272与伯胺N1923的混合物对Zn(Ⅱ)的协同萃取效应,得出了协萃反应方程式和平衡常数.3.考察了伯胺N1923与中性有机磷(膦)类萃取剂DEH/EHP的混合体系在盐酸介质中对Zn(Ⅱ)和Cd(Ⅱ)的萃取效应,研究了萃取机理,并研究了此混合体系对Zn(Ⅱ)和Cd(Ⅱ)的分离.4.揭示了Cyanex923萃取硝酸过程中出现第三相的机理和三相的相行为,讨论了第三相形成的影响因素.5.考察了盐酸介质中HEOPPA萃淋树脂对二价过渡金属元素的吸附平衡,得出了吸附反应方程式.