Towards solutions for a liveable future: progress, practice, performance, people: Proceedings of the 41st Annual Conference of the Architectural Science Association ANZAScA

There is hope! Since Al Gore disclosed the inconvenient truth, the climate has changed. The time of denial is over; the era of well-informed action and sound development is with us. Sustainability has now moved from the fringe, into the mainstream of politics, society, architecture and building practice. In this new context architectural science will contribute to two main tasks: prevent further damage to our environment, and respond to challenges invoked by climate change.
The built environment and human activity within it account for a large part of the problem. Architectural science and architectural practice are part of the solution. The ANZAScA 2007 conference focuses on the solutions architectural science has to offer toward a liveable future through the following generic themes:
progress – the evaluation and improvement of built facilities, new and existing, in terms of energy intensity, financial reward and environmental impact.
practice – the relationship between our cultural heritage, new facility design, retrofit design and its realisation
through construction.
performance – the connection between building operation targets, validation of performance, and user comfort and interaction in new and existing environments.
people – the effect of space on user behaviour, user responsibility and social wealth.
In response to this challenge, architectural science researchers including students, educators, and practitioners at ANZAScA 2007, present a broad range of research activity and concern within the built environment from global issues down to the specific actions of individuals.

A study on energy performance of hotel buildings in Singapore

This paper presents a study on energy performance of Singapore's hotel buildings. Energy consumption data and other pertinent information were collected from 29 quality hotels through a national survey. Building features and operational characteristics contributing to the variations in hotel energy performance were discussed. The annual average total energy use intensity (EUI) in these hotels is 427 kWh/m2. Electricity and gas are used in all sampled hotels, and some hotels also use diesel to power standby generator or hot water boiler. We also investigated relationships between electricity consumption and number of occupied rooms in individual hotels; the weak correlations found indicate it is necessary to improve energy management when occupancy rate is low. Besides, Pearson correlations between hotel energy use intensity and possible explanatory indicators revealed that three-star hotels differ from high class establishments in energy use. Worker density and years after the last major energy retrofit were also found to be highly correlated to hotel building energy use intensity. Also discussed in this paper is the effect of weather conditions on electricity consumption of the hotels.

Promoting energy efficiency in the private rented sector

The English House Condition Survey for 1991 demonstrated that levels of energy efficiency in private rented property are significantly below other sectors, even though energy improvements have tangible benefits for landlords. The low level of energy efficiency provision in the private rented sector indicates that landlords are unaware or unconvinced of these benefits and market barriers may have restricted uptake. Information regarding energy efficiency advice to the private rented HMO sector has focussed on offering good practice design guidance, and information about the level of fitness and overall characteristics of the sector. This research project evaluated the PRESS scheme, which encouraged landlords to introduce energy efficiency measures. A total of 78 private sector rented properties in Sheffield were analysed with retrofit measures to improve levels of energy efficiency. The results demonstrate that whilst market barriers exist, the PRESS scheme went some way to overcoming some barriers to energy efficiency.

Earthquake fatalities : the interaction of nature and political economy

To say that the level of fatalities resulting from an earthquake is inversely related to a country's per capita level of income is hardly novel. What makes our approach novel is that we relate fatalities to both per capita income and the level of inequality that exists within a country through their joint impact on the likelihood of collective action being taken to mitigate the destructive potential of quakes. We first develop a theoretical model which offers an explanation as to why, in some environments, different segments of society prove incapable of arriving at what all parties perceive to be an agreeable distribution of the burden of the necessary collective action, causing the relatively wealthy simply to self-insure against the disaster while leaving the relatively poor to its mercy. Following this, we test our theoretical model by evaluating 269 large earthquakes occurring worldwide, between 1960 and 2002, taking into account other factors that influence a quake's destructiveness such as its magnitude, depth and proximity to population centers. Using a Negative Binomial estimation strategy with both random and fixed estimators, we find strong evidence of the theoretical model's predictions. That is, while earthquakes themselves are natural phenomena beyond the reach of humankind, our collective inaction with respect to items like the creation and enforcement of building codes, failure to retrofit structures and to enact quake-sensitive zoning clearly plays a part in determining the actual toll that a given quake takes. And, it is through these and other examples of collective inaction that limited per capita income and inequality couple together with a given quake's natural destructive power in determining the actual fatalities resulting from a quake.

Sustainability and within use office building adaptations : a comparison of Dutch and Australian practices

Local Authorities worldwide are encouraging adaptation as a means of reducing building related urban energy consumption and greenhouse gas emissions. The City of Melbourne is promoting the retrofit of 1,200 CBD properties before 2020 with sustainability measures as part of their policy to become a carbon neutral city. Australian cities date from 1837 to the present day whereas some European cities have been inhabited for over two millennia. The concepts of adaptation and evolution of buildings and suburbs is well developed in Europe, though the scale of some of the post war developments has created different forms of building perhaps less adaptable or suited to change. The need to adapt buildings and to reduce environmental footprints becomes more pressing over time as global concentrations of carbon dioxide increase. Is it possible for Europeans to learn from Australian practices and vice averse? Through examination of office building adaptation in Melbourne and Amsterdam, it is possible to learn where similarities and differences exist and where new practices can be shared.

This paper addressed the questions; What are the key attributes influencing adaptations in Melbourne and Amsterdam office buildings, and what are the similarities and differences? Using the Melbourne CBD and Amsterdam as a case study, the research analysed 7393 commercial building adaptations in Melbourne and 98 office buildings in Amsterdam where adaptations were completed. The outcomes of this research show where similarities and differences exist and are relevant to all urban areas where adaptation of existing office buildings can mitigate the impacts of climate change and enhance the city for another generation of citizens and users.

Interface slip control for CFRP-concrete composite beams

Carbon fibre reinforced polymer (CFRP) has been used frequently to retrofit concrete structures. Strengthening efficiency is related to the CFRP application process and the characteristics of the bonding agent. In this paper the mechanism of interface shear behaviour in CFRP to concrete beams is discussed considering previous test observations and mathematical models. This paper then discusses the consequences of introducing interface slip which reduces the integrity of the composite section, however improve ductility and delay debonding failure. The paper suggests that using softer bonding agent as well as setting limits on the interface slip could ensure acceptable serviceability and ductile behaviour.

Review of measurements in schools to improve IEQ

An Australian research facility, MABEL (the Mobile Architecture and Built Environment Laboratory) measured several school classrooms for their indoor environmental performance (IEQ) performance. This paper is a reporting of a case study, highlighting the processed measurement of a classroom and its findings. A review of the literature, also reveals particular sectors of IEQ in schools that are worthy of measurement. A primary intention here is to determine the type of IEQ measurements and their evaluation methods together with their corresponding instrumentation. A secondary intention is to highlight particular IEQ discrepancies in existing school classroom design resulting from these case study measurements, suggesting construction and operational conditioning improvements.In particular this research reveals international research on the subject of IEQ in school buildings and confirms the usefulness, urgency and necessity of IEQ measurements, world wide, in this area. As most of the existing literature on the subject seems to fall short of acknowledging all sectors of IEQ, this paper would like to address the importance of multiple IEQ parameters, experienced through on-site measurement case studies. It is suggested that the existing literature intends to target a specific IEQ sector or parameter, predetermining its effect on student absenteeism or reduced performance. In contrast to this, this paper would like to acknowledge the interactive effects of an IEQ index (standard) in general. One of the reasons for this are that such an index still appears to remain in the developmental stages.Various sectors of IEQ measurements, as measured with the MABEL facility, are demonstrated in this paper. They illustrate a cross-section of typical classroom evidence-based problems backed by measurement. A literature review confirms that similar problems in school buildings are evident in other parts of Australia as well as throughout the world, in identical and different climates. A holistic IEQ measurement acknowledges that there may be several outstanding, as well as poor IEQ parameters within the same classroom. Solutions to these poor IEQ results may be remedied, yet, it is the measurement that highlights the periods, degree and extent to which these problems occur. It is suggested here that a holistic approach to IEQ is required and that the development of its measurement standards and reporting are desperately needed.

Constructing knowledge

The most popular model of how students learn is known as the constructivist model of learning. There are variants of this model, but the main features are that learning occurs in the context of pre-existing experiences and ideas, that new concepts are transformed to fit or build on those existing ideas, and that learning occurs in a social or cultural context. Learners are not empty vessels, into which new knowledge can be injected. New concepts, which are consistent with and extend pre-existing experiences and ideas, are easily and effectively assimilated. Learning is difficult, when learners have pre-existing incorrect ideas or alternative conceptions, as they must first unlearn the misconceptions in order to incorporate the new information. In a different context, it is usually much harder and more expensive to retrofit an existing house than to build from scratch. Similarly, it is very hard to overcome bad habits. A previous column in Chemistry in Australia [July 2013, page 35], noted that we simplify ideas when teaching chemistry to younger students, but warned that over-simplication often results in misconceptions that will hinder future learning. Most chemistry educators favour constructivism, because there are similarities with the process of discovery in science. Firstly, the advancement of scientific knowledge builds on past experiences and knowledge: Isaac Newton famously acknowledged, “If I have seen further it is by standing on the shoulders of giants”. Secondly, observations and data of themselves are not meaningful, until that information has been transformed to extend existing ideas: Nobel Laureate Lawrence Bragg wrote, “the important thing in science is not so much to obtain new facts as to discover new ways of thinking about them”. Science as a Human Endeavour (SHE) is one of the strands in the Australian Curriculum. Similarly, one of the learning outcomes in the Draft Chemistry Academic Standards is that graduates will be able to recognise the creative endeavour involved in the acquiring knowledge and to recognise the testable and contestable nature of chemistry. Science is practiced individually and collectively by people. Human beings, who have human virtues and fallibilities, are responsible for scientific advancements. New knowledge is constructed in the minds of learners and scientists. Just as discussions in work teams, workshops, conferences, and the scientific literature, help scientists to extend and improve scientific understanding, the important role of teachers is to guide students to refine, alter and improve their scientific understanding when extending their scientific boundaries.

Motivation and cognitive load in the flipped classroom : definition, rationale and a call for research

Flipped classroom approaches remove the traditional transmissive lecture and replace it with active in-class tasks and pre-/post-class work. Despite the popularity of these approaches in the media, Google search, and casual hallway chats, there is very little evidence of effectiveness or consistency in understanding what a flipped classroom actually is. Although the flipped terminology is new, some of the approaches being labelled ‘flipped’ are actually much older. In this paper, we provide a catch-all definition for the flipped classroom, and attempt to retrofit it with a pedagogical rationale, which we articulate through six testable propositions. These propositions provide a potential agenda for research about flipped approaches and form the structure of our investigation. We construct a theoretical argument that flipped approaches might improve student motivation and help manage cognitive load. We conclude with a call for more specific types of research into the effectiveness of the flipped classroom approach.

Perceptions of change in office space design: redesigning Barwon Water’s office environment

In early 2015 Barwon Water received State government funding to rationalise and renovate its various Geelong-based administrative offices into one complex. Integral to the renovations is a new green-star retrofit of the existing Ryrie Street complex by GHD Woodhead. The project will consolidate all of Barwon Water’s offices onto one site, increase floor space, provide a new ‘green’ atrium, and adopt an open plan layout. Having set a new strategic direction, Barwon Water is now undergoing a wholesale cultural and operational change in order to realise these strategic objectives. Aspirations for workplace design have been identified as: environmentally sustainable; foster innovation and creativity; establish connections; improve communication and collaboration; provide efficient space for effective work; flexibility over time; welcoming and connected to the community; healthy; and, up to date technology. This paper investigates Barwon Water staff perceptions and apprehensions of this prospective consolidation, particularly the proposed open plan office environment. While most research in this topic is informed by an immediate pre-design workshop of staff needs, this research provides a longitudinal perspective of human perceptions about work place environment change and a review of how changes in office environment synergistically align to architectural responses and changes in corporate strategies.

Assessment of bond strength in CFRP retrofitted beams under marine environment

Carbon fibre reinforced polymer (CFRP) sheet has gained its popularity to retrofit civil structures which is bonded externally, typically on the soffit of a beam. In this study, the bond between carbon fibre reinforced polymer (CFRP) and concrete is improved by modifying the property of commercial epoxy and compared against normal epoxy. The deterioration in bond strength was produced by placing the beam into salt water under wet dry cycles. Also, a model is proposed to determine the bond strength from flexural test and compared against the available bond strength models which are typically obtained from pull out test. This proposed model shows promising results in terms of predicting the bond strength from flexural test. In addition, a strength reduction factor is introduced to incorporate the effect of wet dry cycles to predict the long term behaviour. It is found that the modified epoxy enhance the ductile property and bond strength.

Generalization of Wye and Delta auto-connections: Analysis of voltages and currents

Multipulse rectifier topologies based on autoconnections, or differential connections, are more and more applied as interface stages between the mains and power converters. These topologies mitigate many low-order current harmonics in the utility, reducing the THD (total harmonic distortion) and increasing the power factor. This paper presents a mathematical model based on phasor diagrams, that results in a single expression able to unify all differential topologies connections (Delta and Wye), for both step-up or step-down autotransformers, for 12 and 18-pulse AC-DC converters. The proposed family of converters can be designed for any relationship between the input voltage and the load voltage. An immediate application would be the retrofit, i.e. to replace a conventional rectifier with poor quality of the processed energy by the 12 or 18 pulses rectifier with Wye or Delta-differential connection. The design procedure, simple and fast, is developed and tested for a prototype rating 6 kW and 250 V on the DC load © 2010 IEEE.

Família de retificadores multipulsos com topologias diferenciais de transformadores

Multipulse rectifier topologies based on auto-connections or differential connections, are more and more applied as interface stages between the mains and power converters. These topologies are becoming increasingly attractive not only for robustness, but to mitigate many low order current harmonics in the utility, reducing the total harmonic distortion of the line currents (THDi) and increasing the power factor requirements. Unlike isolated connections (delta-wye, zigzag, etc.), when the differential transformer is employed, most of the energy required by the load is directly conducted through the windings. Thus, only a small fraction of the kVA is processed by the magnetic core. This feature increases the power density of the converter. This paper presents a mathematical model based on phasor diagrams, which results in a single expression able to merge all differential connections (wye and delta), for both step-up and step-down rectifiers for 12 or 18 pulses. The proposed family of converters can be designed for any relationship between the line input voltage and the DC voltage, unlike the conventional phase-shift voltage connections. An immediate application would be the retrofit, i.e. to replace a conventional rectifier with poor quality of the processed energy by the 12 or 18-pulse rectifiers with Wye or Delta-differential connections, keeping the original values for the input and load voltages. The simple and fast design procedure is developed and tested for a prototype rating 6 kW and 400 V on DC load.

Análise termoelástica experimental e computacional por elementos finitos da parede externa em concreto armado de um forno de cozimento de anodo

Nesta dissertação foi desenvolvido um estudo sobre o comportamento de uma estrutura em concreto armado submetida a elevadas variações térmicas. A estrutura analisada consiste na parede externa de um forno de cozimento de anodo utilizado na produção de Alumínio, e está submetida a variações térmicas de cerca de 125C devido à própria operação do forno. As motivações principais para o estudo foram a ocorrência de grandes deformações e o surgimento de fissuras na estrutura, o que poderia provocar a inutilização do forno. O objetivo do trabalho foi a investigação das causas destas patologias, assim como o estabelecimento de propostas para reforço da estrutura. Para isso, foram realizados estudos experimentais e computacionais do comportamento da estrutura. Inicialmente, a estrutura foi monitorada utilizando-se transdutores de deslocamento e sensores de temperatura (termopares), conectados a um sistema de aquisição de dados para obtenção e armazenamento automática das amostras ao longo do tempo. Em seguida, foram desenvolvidos modelos computacionais em Elementos Finitos com auxilio do programa computacional Algor, para determinação da distribuição de temperatura e as correspondentes tensões e deformações de origem térmica na estrutura. Nestes estudos, foram realizadas análises estacionárias e transientes de condução de calor, seguidas de análises de tensões de origem térmica. Como conclusão do estudo, tem-se que a metodologia proposta para a solução do problema foi bastante satisfatória, solucionando o problema de forma precisa, porém econômica.

Proposta de adequação à construção sustentável: tecnologias e alternativas para instituições de ensino

Due to the huge impact negative on the environmental caused by the civil construction, the university plays a majorital role in the proposal of studies and projects that aim the sustainable building. Nowadays, it has been noted the great demand for projects which contain a systemic focus in the tripod of the sustainable development, that is to say, more and more the consumers are demanding that the final result of a project contemplate the social, economic and environmental areas. According to the National Industry Confederation (CNI) and the Brazilian Chamber of the Industry and the Construction (CBIS), the goal for 2020 is that the constructions have an environmental performance 20% higher in comparison to the actual one, starting with an index defined by many indicators, such as: water consumption, energy, residues generation and social-environmental performance of the bought products. In this case, the theme of the project comes around the adequation of scholar institutions to the sustainable construction through simple changes of tecnologies and habits aiming the growth of the environmental eficiency of the enterprise and, consequently, the improve of sustainable practices inside the institution. Once the change is proposed, it will be furnished datas liable of reproduction for the adequation of others scholar institutions, according to it's necessity or interest. After the realization of the studies, it was possible to notice that the environmental performance of a scholar institution can be improved through the implantation of tecnologies of fast return in the investment, such as: flow reducers, rain water reuse system, green roof, retrofit of lamps and execution of a photovoltaic system. Besides the fast return of investment, the monthly economy of the applied tecnologies combined can reach 75% when compared to the actual spending with water and electric energy