Thermally tunable polarization by nanoparticle plasmonic resonance in photonic crystal fibers

A photonic crystal fiber selectively filled with silver nanoparticles dispersed in polydimethylsiloxane has been numerically studied via finite elements analysis. These nanoparticles possess a localized surface plasmon resonance in the visible region which depends on the refractive index of the surrounding medium. The refractive index of polydimethylsiloxane can be thermally tuned leading to the design of polarization tunable filters. Filters found with this setup show anisotropic attenuation of the x-polarization fundamental mode around ?x = 1200dB/cm remarkably higher than the y-polarization mode. Moreover, high fiber birefringence and birefringence reversal is observed in the spectral region of the plasmon.

Resonance in radiation effects; technical report.

Technical reports no. 2, 4 published also as dissertations, University of Michigan, in microfilm form.

Portrayal of depression and other mental illnesses in Australian nonfiction media

This study describes Australian media portrayal of mental illnesses, focusing on depression. A random sample of 1,123 items was selected for analysis from a pool of 13,389 nonfictional media items about mental illness collected between March 2000 and February 2001. Depression was portrayed more frequently than other mental illnesses. Items about depression, eating disorders, and substance use disorders most commonly described policies or programs, whereas items about schizophrenia most frequently portrayed individuals or symptoms and treatment. A minority of items about depression presented information about symptoms, causes, treatment, or prognosis. Although such information was generally accurate, a proportion of items conveyed misleading messages. There is therefore scope for increasing the level of accurate information provided about depression in the Australian media. (c) 2005 Wiley Periodicals, Inc.

Coherence and anticoherence resonance in high-concentration erbium-doped fiber laser

We report an experimental study of low-frequency (~10 kHz) self-pulsing of the output intensity in a high- concentration erbium-doped fiber laser. We suggest that the fast intensity fluctuations caused by multimode and polarization instabilities play the role of an external noise source, leading to low-frequency auto-oscillations through a coherence resonance scenario.

Stochastic anti-resonance in a fibre Raman amplifier

Stochastic anti-resonance, that is resonant enhancement of randomness caused by polarization mode beatings, is analyzed both numerically and analytically on an example of fibre Raman amplifier with randomly varying birefringence. As a result of such anti-resonance, the polarization mode dispersion growth causes an escape of the signal state of polarization from a metastable state corresponding to the pulling of the signal to the pump state of polarization.This phenomenon reveals itself in abrupt growth of gain fluctuations as well as in dropping of Hurst parameter and Kramers length characterizing long memory in a system and noise induced escape from the polarization pulling state. The results based on analytical multiscale averaging technique agree perfectly with the numerical data obtained by direct numerical simulations of underlying stochastic differential equations. This challenging outcome would allow replacing the cumbersome numerical simulations for real-world extra-long high-speed communication systems.

Optimization of wireless power transfer via magnetic resonance in different media

A wide range of non-destructive testing (NDT) methods for the monitoring the health of concrete structure has been studied for several years. The recent rapid evolution of wireless sensor network (WSN) technologies has resulted in the development of sensing elements that can be embedded in concrete, to monitor the health of infrastructure, collect and report valuable related data. The monitoring system can potentially decrease the high installation time and reduce maintenance cost associated with wired monitoring systems. The monitoring sensors need to operate for a long period of time, but sensors batteries have a finite life span. Hence, novel wireless powering methods must be devised. The optimization of wireless power transfer via Strongly Coupled Magnetic Resonance (SCMR) to sensors embedded in concrete is studied here. First, we analytically derive the optimal geometric parameters for transmission of power in the air. This specifically leads to the identification of the local and global optimization parameters and conditions, it was validated through electromagnetic simulations. Second, the optimum conditions were employed in the model for propagation of energy through plain and reinforced concrete at different humidity conditions, and frequencies with extended Debye's model. This analysis leads to the conclusion that SCMR can be used to efficiently power sensors in plain and reinforced concrete at different humidity levels and depth, also validated through electromagnetic simulations. The optimization of wireless power transmission via SMCR to Wearable and Implantable Medical Device (WIMD) are also explored. The optimum conditions from the analytics were used in the model for propagation of energy through different human tissues. This analysis shows that SCMR can be used to efficiently transfer power to sensors in human tissue without overheating through electromagnetic simulations, as excessive power might result in overheating of the tissue. Standard SCMR is sensitive to misalignment; both 2-loops and 3-loops SCMR with misalignment-insensitive performances are presented. The power transfer efficiencies above 50% was achieved over the complete misalignment range of 0°-90° and dramatically better than typical SCMR with efficiencies less than 10% in extreme misalignment topologies.

Collective excitability, synchronization, and array-enhanced coherence resonance in a population of lasers with a saturable absorber

In this article we present a numerical study of the collective dynamics in a population of coupled semiconductor lasers with a saturable absorber, operating in the excitable regime under the action of additive noise. We demonstrate that temporal and intensity synchronization takes place in a broad region of the parameter space and for various array sizes. The synchronization is robust and occurs even for a set of nonidentical coupled lasers. The cooperative nature of the system results in a self-organization process which enhances the coherence of the single element of the population too and can have broad impact for detection purposes, for building all-optical simulators of neural networks and in the field of photonics-based computation.

Reducing Social Isolation in a Rural Community Through Participation in Creative Arts Projects

This article reports the initial findings from the evaluation of four creative arts projects involving groups of older people living in a rural community. The purpose of the projects was to reduce social isolation among participants through providing direct access to arts and social activities. The view was that these activities would improve life skills and independence, increase levels of activity and improve the health, wellbeing and quality of life of participants. Evaluation of these projects demonstrated increased levels of self-worth and self-esteem among participants, and many of the older people involved agreed that they had made new friends while having the opportunity to try out a new activity.

Hyperlinks in e-books : expanding the functionality of end-notes

With its powerful search engines and billions of published pages, the Worldwide Web has become the ultimate tool to explore the human experience. But, despite the advent of the digital revolution, e-books, at their core, have remained remarkably similar to their printed siblings. This has resulted in a clear dichotomy between two ways of reading: on one side, the multi-dimensional world of the Web; on the other, the linearity of books and e-books. My investigation of the literature indicates that the focus of attempts to merge these two modes of production, and hence of reading, has been the insertion of interactivity into fiction. As I will show in the Literature Review, a clear thrust of research since the early 1990s, and in my opinion the most significant, has concentrated on presenting the reader with choices that affect the plot. This has resulted in interactive stories in which the structure of the narrative can be altered by the reader of experimental fiction. The interest in this area of research is not surprising, as the interaction of readers with the fabric of the narrative provides a fertile ground for exploring, analysing, and discussing issues of plot consistency and continuity. I found in the literature several papers concerned with the effects of hyperlinking on literature, but none about how hyperlinked material and narrative could be integrated without compromising the narrative flow as designed by the author. It led me to think that the researchers had accepted hypertextuality and the linear organisation of fiction as being antithetical, thereby ignoring the possibility of exploiting the first while preserving the second. All the works I consulted were focussed on exploring the possibilities provided to authors (and readers) by hypertext or how hypertext literature affects literary criticism. This was true in earlier works by Landow and Harpold and remained true in later works by Bolter and Grusin. To quote another example, in his book Hypertext 3.0, Landow states: “Most who have speculated on the relation between hypertextuality and fiction concentrate [...] on the effects it will have on linear narrative”, and “hypertext opens major questions about story and plot by apparently doing away with linear organization” (Landow, 2006, pp. 220, 221). In other words, the authors have added narrative elements to Web pages, effectively placing their stories in a subordinate role. By focussing on “opening up” the plots, the researchers have missed the opportunity to maintain the integrity of their stories and use hyperlinked information to provide interactive access to backstory and factual bases. This would represent a missing link between the traditional way of reading, in which the readers have no influence on the path the author has laid out for them, and interactive narrative, in which the readers choose their way across alternatives, thereby, at least to a certain extent, creating their own path. It would be, to continue the metaphor, as if the readers could follow the main path created by the author while being able to get “sidetracked” into exploring hyperlinked material. In Hypertext 3.0, Landow refers to an “Axial structure [of hypertext] characteristic of electronic books and scholarly books with foot-and endnotes” versus a “Network structure of hypertext” (Landow, 2006, p. 70). My research aims at generalising the axial structure and extending it to fiction without losing the linearity at its core. In creative nonfiction, the introduction of places, scenes, and settings, together with characterisation, brings to life the facts without altering them; while much fiction draws on facts to provide a foundation, or narrative elements, for the work. But how can the reader distinguish between facts and representations? For example, to what extent do dialogues and perceptions present what was actually said and thought? Some authors of creative nonfiction use end-notes to provide comments and citations while minimising disruption the flow of the main text, but they are limited in scope and constrained in space. Each reader should be able to enjoy the narrative as if it were a novel but also to explore the facts at the level of detail s/he needs. For this to be possible, end-notes should provide a Web-like way of exploring in more detail what the author has already researched. My research aims to develop ways of integrating narrative prose and hyperlinked documents into a Hyperbook. Its goal is to create a new writing paradigm in which a story incorporates a gateway to detailed information. While creative nonfiction uses the techniques of fictional writing to provide reportage of actual events and fact-based fiction illuminates the affectual dimensions of what happened (e.g., Kate Grenville’s The Secret River and Hilary Mantel’s Wolf Hall), Hyperbooks go one step further and link narrative prose to the details of the events on which the narrative is based or, more in general, to information the reader might find of interest. My dissertation introduces and utilises Hyperbooks to engage in two parallel types of investigation Build knowledge about Italian WWII POWs held in Australia and present it as part of a novella in Hyperbook format. Develop a new piece of technology capable of extending the writing and reading process.

Optimization of Wireless Power Transfer via Magnetic Resonance in Different Media

A wide range of non-destructive testing (NDT) methods for the monitoring the health of concrete structure has been studied for several years. The recent rapid evolution of wireless sensor network (WSN) technologies has resulted in the development of sensing elements that can be embedded in concrete, to monitor the health of infrastructure, collect and report valuable related data. The monitoring system can potentially decrease the high installation time and reduce maintenance cost associated with wired monitoring systems. The monitoring sensors need to operate for a long period of time, but sensors batteries have a finite life span. Hence, novel wireless powering methods must be devised. The optimization of wireless power transfer via Strongly Coupled Magnetic Resonance (SCMR) to sensors embedded in concrete is studied here. First, we analytically derive the optimal geometric parameters for transmission of power in the air. This specifically leads to the identification of the local and global optimization parameters and conditions, it was validated through electromagnetic simulations. Second, the optimum conditions were employed in the model for propagation of energy through plain and reinforced concrete at different humidity conditions, and frequencies with extended Debye's model. This analysis leads to the conclusion that SCMR can be used to efficiently power sensors in plain and reinforced concrete at different humidity levels and depth, also validated through electromagnetic simulations. The optimization of wireless power transmission via SMCR to Wearable and Implantable Medical Device (WIMD) are also explored. The optimum conditions from the analytics were used in the model for propagation of energy through different human tissues. This analysis shows that SCMR can be used to efficiently transfer power to sensors in human tissue without overheating through electromagnetic simulations, as excessive power might result in overheating of the tissue. Standard SCMR is sensitive to misalignment; both 2-loops and 3-loops SCMR with misalignment-insensitive performances are presented. The power transfer efficiencies above 50% was achieved over the complete misalignment range of 0°-90° and dramatically better than typical SCMR with efficiencies less than 10% in extreme misalignment topologies.

Resonance : a music director’s theomusicological study of ‘praise’ and ‘glory’ in a selection of four liturgical music excerpts

Some of my most powerful spiritual experiences have come from the splendorous and sublime sounding hymns performed by a choir and church organ at the traditional Anglican church I’ve attended since I was very young. In the later stage of my life, my pursuit of education in the field of engineering caused me to move to Australia where I regularly attended a contemporary evangelical church and subsequently became a music director in the faith community. This environmental and cultural shift altered my perception and musical experiences of Christian music and led me to enquire about the relationship between Christian liturgy and church music. Throughout history church musicians and composers have synthesised the theological, congregational, cultural and musical aspects of church liturgy. Many great composers have taken into account the conditions surrounding the process of sacred composition and arrangement of music to enhance the experience of religious ecstasy – they sought resonances with Christian values and beliefs to draw congregational participation into the light of praising and glorifying God. As a music director in an evangelical church this aspiration has become one I share. I hope to identify and define the qualities of these resonances that have been successful and apply them to my own practice. Introduction and Structure of the Thesis In this study I will examine four purposively selected excerpts of Christian church vocal music combining theomusicological and semiotic analysis to help identify guidelines that might be useful in my practice as a church music director. The four musical excerpts have been selected based upon their sustained musical and theological impact over time, and their ability to affect ecstatic responses from congregations. This thesis documents a personal journey through analysis of music and uses a context that draws upon ethno-musicological, theological and semiotic tools that lead to a preliminary framework and principles which can then be applied to the identified qualities of resonance in church music today. The thesis is comprised of four parts. Part 1 presents a literature study on the relationship between sacred music, the effects of religious ecstasy and the Christian church. Multiple lenses on this phenomenon are drawn from the viewpoints of prominent western church historians, Biblical theologians, and philosophers. The literature study continues in Part 2, where the role of embodiment is examined from the current perspective of cognitive learning environments. This study offers a platform for a critical reflection on two distinctive musical liturgical systems that have treated differently the notion of embodied understanding amidst a shifting church paradigm. This allows an in-depth theological and philosophical understanding of the liturgical conditions around sacred music-making that relates to the monistic and dualistic body/mind. Part 3 involves undertaking a theomusicological methodology that utilises creative case studies of four purposively selected spiritual pieces. A semiotic study focuses on specific sections of sacred vocal works that express the notions of ‘praise’ and ‘glorification’, particularly in relation to these effects,which combine an analysis of theological perspectives around religious ecstasy and particular spiritual themes. Part 4 presents the critiques and findings gathered from the study that incorporate theoretical and technological means to analyse the purposive selected musical artefact, particularly with the sonic narratives expressing notions of ‘Praise' and 'Glory’. The musical findings are further discussed in relation to the notion of resonance, and then a conceptual framework for the role of contemporary musicdirector is proposed. The musical and Christian terminologies used in the thesis are explained in the glossary, and the appendices includes tables illustrating the musical findings, conducted surveys, written musical analyses and audio examples of selected sacred pieces available on the enclosed compact disc.

The creative sector in New Zealand : mapping and economic role : report to New Zealand Trade and Enterprise

The New Zealand creative sector was responsible for almost 121,000 jobs at the time of the 2006 Census (6.3% of total employment). These are divided between • 35,751 creative specialists – persons employed doing creative work in creative industries • 42,300 support workers - persons providing management and support services in creative industries • 42,792 embedded creative workers – persons engaged in creative work in other types of enterprise The most striking feature of this breakdown is the fact that the largest group of creative workers are employed outside the creative industries, i.e. in other types of businesses. Even within the creative industries, there are fewer people directly engaged in creative work than in providing management and support. Creative sector employees earned incomes of approximately $52,000 per annum at the time of the 2006 Census. This is relatively uniform across all three types of creative worker, and is significantly above the average for all employed persons (of approximately $40,700). Creative employment and incomes were growing strongly over both five year periods between the 1996, 2001 and 2006 Censuses. However, when we compare creative and general trends, we see two distinct phases in the development of the creative sector: • rapid structural growth over the five years to 2001 (especially led by developments in ICT), with creative employment and incomes increasing rapidly at a time when they were growing modestly across the whole economy; • subsequent consolidation, with growth driven by more by national economic expansion than structural change, and creative employment and incomes moving in parallel with strong economy-wide growth. Other important trends revealed by the data are that • the strongest growth during the decade was in embedded creative workers, especially over the first five years. The weakest growth was in creative specialists, with support workers in creative industries in the middle rank, • by far the strongest growth in creative industries’ employment was in Software & digital content, which trebled in size over the decade Comparing New Zealand with the United Kingdom and Australia, the two southern hemisphere nations have significantly lower proportions of total employment in the creative sector (both in creative industries and embedded employment). New Zealand’s and Australia’s creative shares in 2001 were similar (5.4% each), but in the following five years, our share has expanded (to 5.7%) whereas Australia’s fell slightly (to 5.2%) – in both cases, through changes in creative industries’ employment. The creative industries generated $10.5 billion in total gross output in the March 2006 year. Resulting from this was value added totalling $5.1b, representing 3.3% of New Zealand’s total GDP. Overall, value added in the creative industries represents 49% of industry gross output, which is higher than the average across the whole economy, 45%. This is a reflection of the relatively high labour intensity and high earnings of the creative industries. Industries which have an above-average ratio of value added to gross output are usually labour-intensive, especially when wages and salaries are above average. This is true for Software & Digital Content and Architecture, Design & Visual Arts, with ratios of 60.4% and 55.2% respectively. However there is significant variation in this ratio between different parts of the creative industries, with some parts (e.g. Software & Digital Content and Architecture, Design & Visual Arts) generating even higher value added relative to output, and others (e.g. TV & Radio, Publishing and Music & Performing Arts) less, because of high capital intensity and import content. When we take into account the impact of the creative industries’ demand for goods and services from its suppliers and consumption spending from incomes earned, we estimate that there is an addition to economic activity of: • $30.9 billion in gross output, $41.4b in total • $15.1b in value added, $20.3b in total • 158,100 people employed, 234,600 in total The total economic impact of the creative industries is approximately four times their direct output and value added, and three times their direct employment. Their effect on output and value added is roughly in line with the average over all industries, although the effect on employment is significantly lower. This is because of the relatively high labour intensity (and high earnings) of the creative industries, which generate below-average demand from suppliers, but normal levels of demand though expenditure from incomes. Drawing on these numbers and conclusions, we suggest some (slightly speculative) directions for future research. The goal is to better understand the contribution the creative sector makes to productivity growth; in particular, the distinctive contributions from creative firms and embedded creative workers. The ideas for future research can be organised into the several categories: • Understanding the categories of the creative sector– who is doing the business? In other words, examine via more fine grained research (at a firm level perhaps) just what is the creative contribution from the different aspects of the creative sector industries. It may be possible to categorise these in terms of more or less striking innovations. • Investigate the relationship between the characteristics and the performance of the various creative industries/ sectors; • Look more closely at innovation at an industry level e.g. using an index of relative growth of exports, and see if this can be related to intensity of use of creative inputs; • Undertake case studies of the creative sector; • Undertake case studies of the embedded contribution to growth in the firms and industries that employ them, by examining taking several high performing noncreative industries (in the same way as proposed for the creative sector). • Look at the aggregates – drawing on the broad picture of the extent of the numbers of creative workers embedded within the different industries, consider the extent to which these might explain aspects of the industries’ varied performance in terms of exports, growth and so on. • This might be able to extended to examine issues like the type of creative workers that are most effective when embedded, or test the hypothesis that each industry has its own particular requirements for embedded creative workers that overwhelms any generic contributions from say design, or IT.

ICTs for creative practice in drama : creating cyberdrama with young people in school contexts

This study explores young people's creative practice through using Information and Communications Technologies (ICTs) - in one particular learning area - Drama. The study focuses on school-based contexts and the impact of ICT-based interventions within two drama education case studies. The first pilot study involved the use of online spaces to complement a co-curricula performance project. The second focus case was a curriculum-based project with online spaces and digital technologies being used to create a cyberdrama. Each case documents the activity systems, participant experiences and meaning making in specific institutional and technological contexts. The nature of creative practice and learning are analysed, using frameworks drawn from Vygotsky's socio-historical theory (including his work on creativity) and from activity theory. Case study analysis revealed the nature of contradictions encountered and these required an analysis of institutional constraints and the dynamics of power. Cyberdrama offers young people opportunities to explore drama through new modes and the use of ICTs can be seen as contributing different tools, spaces and communities for creative activity. To be able to engage in creative practice using ICTs requires a focus on a range of cultural tools and social practices beyond those of the purely technological. Cybernetic creative practice requires flexibility in the negotiation of tool use and subjects and a system that responds to feedback and can adapt. Classroom-based dramatic practice may allow for the negotiation of power and tool use in the development of collaborative works of the imagination. However, creative practice using ICTs in schools is typically restricted by authoritative power structures and access issues. The research identified participant engagement and meaning making emerging from different factors, with some students showing preferences for embodied creative practice in Drama that did not involve ICTs. The findings of the study suggest ICT-based interventions need to focus on different applications for the technology but also on embodied experience, the negotiation of power, identity and human interactions.

Copyright and creative innovation in China : an evolutionary approach?

China has made great progress in constructing comprehensive legislative and judicial infrastructures to protect intellectual property rights. But levels of enforcement remain low. Estimates suggest that 90% of film and music products consumed in China are ‘pirated’ and in 2009 81% of the infringing goods seized at the US border originated from China. Despite of heavy criticism over its failure to enforce IPRs, key areas of China’s creative industries, including film, mobile-music, fashion and animation, are developing rapidly. This paper explores how the rapid expansion of China’s creative economy might be reconciled with conceptual approaches that view the CIs in terms of creativity inputs and IP outputs. It argues that an evolutionary understanding of copyright’s role in creative innovation might better explain China’s experiences and provide more general insights into the nature of the creative industries and the policies most likely to promote growth in this sector of the economy.

Developments in measuring the “creative” workforce

This article outlines the contribution the ARC Centre of Excellence for Creative Industries and Innovation has made to the project to improve statistical parameters for defining the “creative” workforce. This is one approach which addresses the imprecision of official statistics in grasping the emergent nature of the creative industries. The article discusses the policy implications of the differences between emphasizing industry and occupation or workforce. It provides qualitative case studies that provide further perspectives on quantitative analysis of the creative workforce. It also outlines debates about the implications for the cultural disciplines of an evidence-based account of creative labour. The “creative trident” methodology is summarized: it is the total of creative occupations within the core creative industries (specialists), plus the creative occupations employed in other industries (embedded) plus the business and support occupations employed in creative industries who are often responsible for managing, accounting for and technically supporting creative activity (support). The method is applied to the arts workforce in Australia. An industry-facing spin-off from the centre's mapping work, Creative Business Benchmarker, is discussed. The implications of this approach to the creative workforce is raised and exemplified in case studies of design and of the health industry.