988 resultados para rendimento em óleo bruto
Resumo:
The objective of this study was to produce biofuels (bio-oil and gas) from the thermal treatment of sewage sludge in rotating cylinder, aiming industrial applications. The biomass was characterized by immediate and instrumental analysis (elemental analysis, scanning electron microscopy - SEM, X-ray diffraction, infrared spectroscopy and ICP-OES). A kinetic study on non-stationary regime was done to calculate the activation energy by Thermal Gravimetric Analysis evaluating thermochemical and thermocatalytic process of sludge, the latter being in the presence of USY zeolite. As expected, the activation energy evaluated by the mathematical model "Model-free kinetics" applying techniques isoconversionais was lowest for the catalytic tests (57.9 to 108.9 kJ/mol in the range of biomass conversion of 40 to 80%). The pyrolytic plant at a laboratory scale reactor consists of a rotating cylinder whose length is 100 cm with capable of processing up to 1 kg biomass/h. In the process of pyrolysis thermochemical were studied following parameters: temperature of reaction (500 to 600 ° C), flow rate of carrier gas (50 to 200 mL/min), frequency of rotation of centrifugation for condensation of bio-oil (20 to 30 Hz) and flow of biomass (4 and 22 g/min). Products obtained during the process (pyrolytic liquid, coal and gas) were characterized by classical and instrumental analytical techniques. The maximum yield of liquid pyrolytic was approximately 10.5% obtained in the conditions of temperature of 500 °C, centrifugation speed of 20 Hz, an inert gas flow of 200 mL/min and feeding of biomass 22 g/min. The highest yield obtained for the gas phase was 23.3% for the temperature of 600 °C, flow rate of 200 mL/min inert, frequency of rotation of the column of vapor condensation 30 Hz and flow of biomass of 22 g/min. The non-oxygenated aliphatic hydrocarbons were found in greater proportion in the bio-oil (55%) followed by aliphatic oxygenated (27%). The bio-oil had the following characteristics: pH 6.81, density between 1.05 and 1.09 g/mL, viscosity between 2.5 and 3.1 cSt and highest heating value between 16.91 and 17.85 MJ/ kg. The main components in the gas phase were: H2, CO, CO2 and CH4. Hydrogen was the main constituent of the gas mixture, with a yield of about 46.2% for a temperature of 600 ° C. Among the hydrocarbons formed, methane was found in higher yield (16.6%) for the temperature 520 oC. The solid phase obtained showed a high ash content (70%) due to the abundant presence of metals in coal, in particular iron, which was also present in bio-oil with a rate of 0.068% in the test performed at a temperature of 500 oC.
Resumo:
In this work, expanded perlite, a mineral clay, consisting of SiO2 and Al2O3 in the proportions of 72.1 and 18.5%, respectively, was used as an adsorbent for oil in its pure expanded form as well as hydrofobized with linseed oil. Thermogravimetry (TG), Derivative Thermogravimetry (DTG) and Differential Thermal Analysis (DTA) were used to study the thermal behavior and quantify the percent adsorption of perlite in differents processes comparing the results with the ones obtained using Gravimetric Analysis. In the process of hydrophobization with linseed oil granulometric fractions > 20, 20-32 and 32-60 mesh were used and adsorption tests with crude oil were performed in triplicate at room temperature. The results obtained by TG/DTG in dynamic atmosphere of air showed mass losses in a single step for the expanded perlite with pure adsorbed oil, indicating that the adsorption of oil was limited and that the particle size did not in this process. Linseed oil has performed well as an agent of hydrophobized perlite (32 to 60 mesh) indicating a maximum percentage of 59.9% and 68.6% the linseed with a fraction range from considering the data obtained by thermogravimetry and Gravimetry, respectively. The adsorption of oil in the expanded perlite and hydrofobized pure perlite with linseed oil did not produce good results, characterizing an increase of 0.5 to 4.6% in pure perlite and 3.3% in hydrofobized perlite with granulometric 32 to 60 mesh
Resumo:
This study proposes to find a biodiesel through transesterification of rice bran oil with KI/Al2O3 checking the influence of two types of alumina (Amorphous and Crystalline) for conversion into methyl esters. The catalyst was synthesized by the wet impregnation method. Adding 30 mL of 35% KI(aq.) in 10 g of alumina, under stirring at 80 °C for 3 hours. The reaction conditions used in this study were optimized, with a molar ratio methanol:oil of 15:1, 8 h of reaction time and reflux temperature. The catalyst amount was varied in the range of 1 to 5 % wt. The solid catalysts materials were analyzed by: x-ray diffraction (XRD), thermogravimetry (TG), N2 adsorption/desorption, scanning electron microscopy (SEM) and basicity, for the identification of its structure and composition, verifying the presence of basic sites. The results showed that Al2O3(A) presents an amorphous structure, high surface area and a better catalytic activity, in relation to the catalyst synthesized with Al2O3(C) support that proved to have a more crystalline structure, having as well, a lesser surface area, enabling difficulties for the incorporation of active sites. The obtained biodiesel with 5% wt. KI/Al2O3(A) presented physicochemical properties within the standards specified by the Resolution No 7/2008 ANP and obtained the best reaction yield with 95.2%, according to quantitative measurement from the TG, which showed 96.2% conversion into methyl esters. It was furthermore found that with the increasing amount of the quantity of the catalyst in the reaction, there was also an increase in the ester content obtained. The specific mass and the kinematic viscosity were reduced with the increase of the amount of quantity of the catalyst, indicating an increase in the conversion of triglycerides
Resumo:
In this research the removal of light and heavy oil from disintegrated limestone was investigated with use of microemulsions. These chemical systems were composed by surfactant, cosurfactant, oil phase and aqueous phase. In the studied systems, three points in the water -rich microemulsion region of the phase diagrams were used in oil removal experiments. These microemulsion systems were characterized to evaluate the influence of particle size, surface tension, density and viscosity in micellar stability and to understand how the physical properties can influence the oil recovery process. The limestone rock sample was characterized by thermogravimetry, BET area, scanning electron microscopy and X-ray fluorescence. After preparation, the rock was placed in contact with light and heavy oil solutions to allow oil adsorption. The removal tests were performed to evaluate the influence of contact time (1 minute, 30 minutes, 60 minutes and 120 minutes), the concentration of active matter (20, 30 and 40 %), different cosurfactants and different oil phases. For the heavy oil, the best result was on SME 1, with 20 % of active matter, 1 minute of contact time, with efficiency of 93,33 %. For the light oil, also the SME 1, with 20 % of active matter, 120 minutes of contact time, with 62,38 % of efficiency. From the obtained results, it was possible to conclude that microemulsions can be considered as efficient chemical systems for oil removal from limestone formations
Resumo:
Objetivou-se, neste estudo, avaliar os efeitos de diferentes níveis de fibra bruta e de óleo de soja em rações para a tilápia do Nilo. Utilizaram-se 24 aquários circulares de 250 L, dotados de sistema individual de reabastecimento de água e aquecimento. A densidade de estocagem foi de sete peixes/aquário, totalizando 168 peixes, com peso inicial médio de 6,41±0,05 g. Ganho de peso, conversão alimentar aparente, taxa de crescimento específico e taxa de eficiência protéica foram avaliados. Foram analisados a composição química e o rendimento de carcaça, gordura visceral e índice hepatossomático dos peixes. O experimento foi realizado segundo um esquema fatorial 3 x 2 (três níveis de fibra bruta 6,00; 9,00 e 12,00%, com e sem óleo de soja) no delineamento inteiramente ao acaso com quatro repetições. Verificou-se que a fibra interfere de forma significativa na digestibilidade aparente da dieta, com ação positiva para a proteína e negativa para a matéria seca, não interferindo na digestibilidade do extrato etéreo; que a fibra bruta não tem efeito significativo sobre o rendimento de carcaça e no depósito de gordura visceral, mas a inclusão de óleo à ração tem efeito significativo no depósito de gordura visceral; que a fibra resulta em efeito significativo na composição química da carcaça (teor de água e proteína), não tendo efeito sobre sua composição em gordura; e que a inclusão de gordura à ração diminui e eleva de forma significativa, respectivamente, o conteúdo de proteína e extrato etéreo da carcaça. Concluiu-se que, na fase de alevinagem (6,40 a 31,00g), pode-se utilizar na dieta da tilápia do Nilo até 9,00% de fibra bruta, e que a suplementação de níveis excessivos de lipídeos na dieta piora a composição da carcaça e resulta em maior depósito de gordura visceral.
Resumo:
O objetivo deste trabalho foi avaliar o efeito da utilização de óleo de linhaça, em substituição ao óleo de soja, sobre a produtividade e a qualidade da carne de frangos de corte de ambos os sexos. Foram utilizadas 320 aves, em um arranjo fatorial 4x2 - quatro combinações dos períodos de fornecimento de óleo de soja e óleo de linhaça e dois sexos - e quatro repetições. O desempenho produtivo foi avaliado por pesagens da ração e das aves com 1, 21, 42 dias e no momento do abate, aos 49 dias de idade. Após o abate, foi avaliado o rendimento de carcaça e sua composição: cortes, vísceras e gordura abdominal. Foram determinados os teores de lipídeos totais, umidade e colesterol da carne. A dieta contendo óleo de linhaça melhorou a qualidade nutricional da fração lipídica da carne de frango, mas prejudicou o desempenho produtivo das aves.
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Objetivou-se avaliar os rendimentos dos cortes e dos não-componentes das carcaças de cordeiros Santa Inês puros e ½ Dorset ½ Santa Inês, alimentados com dietas contendo diferentes fontes de óleo vegetal (óleo de soja, óleo de canola e óleo de linhaça) e uma dieta controle (sem adição de óleo vegetal). Após o abate, foram coletados sangue, pele, aparelho gastrintestinal cheio (esôfago + estômagos + intestinos delgado e grosso com seus conteúdos), aparelho gastrintestinal vazio (esôfago + estômagos + intestinos delgado e grosso, previamente esvaziados e limpos), aparelho reprodutor + bexiga, baço, fígado, coração, aparelho respiratório, rins com gordura perirrenal, cabeça, patas e cauda, que foram pesados para determinação do rendimento em relação ao peso vivo ao abate. Após resfriamento por 24 horas em câmara fria, pesou-se a carcaça e, posteriormente, dividiu-se longitudinalmente, sendo a metade esquerda seccionada em sete regiões anatômicas: perna, lombo, paleta, costelas flutuantes, costelas verdadeiras, baixos e pescoço. O estudo dos não-componentes da carcaça destacou a representabilidade dos pesos da pele (8,74%) e do conteúdo gastrintestinal (10,65%) na determinação do rendimento. As porcentagens dos cortes não apresentaram diferenças (p>0,05) em relação às dietas e grupos genéticos estudados.
Resumo:
Este experimento foi conduzido para avaliar os efeitos da redução do amido dietético, utilizando óleo de soja, em dietas para coelhos Nova Zelândia Branco em crescimento sobre o desempenho e rendimento de carcaça dos animais. Os coelhos foram desmamados aos 30 dias e abatidos aos 60 dias de idade. O delineamento experimental foi em blocos ao acaso com quatro tratamentos (2,2, 3,3, 4,4 e 5,5% de adição de óleo de soja às dietas) e cinco repetições com 15 animais por tratamento. Foram avaliados os ganhos de peso diário, a ingestão de alimentos diária, a conversão alimentar, a mortalidade e o rendimento de carcaça. Não houve efeito (P>0,05) dos tratamentos sobre os parâmetros avaliados. Concluiu-se que, nas condições realizadas neste trabalho, a adição de óleo de soja em dietas para coelhos em crescimento até o nível de 5,5% não afetou o desempenho produtivo.
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
This work was carried out with the objective to evaluate the effect of different carbohydrate sources associated with sunflower oil on performance, carcass characteristics and cuts yields of feedlot sheep. Twenty four lambs were assigned to a completely randomized design with a 2 × 2 factorial arrangement with two sources of neutral detergent soluble carbohydrate, starch or neutral detergent soluble fiber, with and without the inclusion of 4.2% sunflower oil. The treatments consisted of diets containing high content of soluble fiber (17.14% DM) without adding oil, high in soluble fiber (16.35% DM) with inclusion of 4.2% sunflower oil, high starch (30.14% DM) without adding oil and high starch (28.21% DM) with addition of 4.2% of sunflower oil. The animals were feedlot with average initial of 17.7 kg and when reached 35 kg body weight were slaughtered. The different sources of carbohydrate and oil inclusion in the diet not influence the days on feedlot in the dry matter intake and average daily weight gain, but higher feed conversion was observed for the diet with a high percentage of neutral detergent soluble fiber compared to diet high in starch. The carcass weights and yields as well as the commercial cuts were not affected by diets. The performance and quantitative characteristics and carcass cuts of lamb are not affected by different carbohydrate sources and their association with 4.2% sunflower oil.
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Pós-graduação em Engenharia e Ciência de Alimentos - IBILCE
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
Pós-graduação em Agronomia (Horticultura) - FCA