Tools and data services registry: a community effort to document bioinformatics resources.

Life sciences are yielding huge data sets that underpin scientific discoveries fundamental to improvement in human health, agriculture and the environment. In support of these discoveries, a plethora of databases and tools are deployed, in technically complex and diverse implementations, across a spectrum of scientific disciplines. The corpus of documentation of these resources is fragmented across the Web, with much redundancy, and has lacked a common standard of information. The outcome is that scientists must often struggle to find, understand, compare and use the best resources for the task at hand.Here we present a community-driven curation effort, supported by ELIXIR-the European infrastructure for biological information-that aspires to a comprehensive and consistent registry of information about bioinformatics resources. The sustainable upkeep of this Tools and Data Services Registry is assured by a curation effort driven by and tailored to local needs, and shared amongst a network of engaged partners.As of November 2015, the registry includes 1785 resources, with depositions from 126 individual registrations including 52 institutional providers and 74 individuals. With community support, the registry can become a standard for dissemination of information about bioinformatics resources: we welcome everyone to join us in this common endeavour. The registry is freely available at https://bio.tools.

Simulation of structural stress history based on dynamic analysis

Modern machine structures are often fabricated by welding. From a fatigue point of view, the structural details and especially, the welded details are the most prone to fatigue damage and failure. Design against fatigue requires information on the fatigue resistance of a structure’s critical details and the stress loads that act on each detail. Even though, dynamic simulation of flexible bodies is already current method for analyzing structures, obtaining the stress history of a structural detail during dynamic simulation is a challenging task; especially when the detail has a complex geometry. In particular, analyzing the stress history of every structural detail within a single finite element model can be overwhelming since the amount of nodal degrees of freedom needed in the model may require an impractical amount of computational effort. The purpose of computer simulation is to reduce amount of prototypes and speed up the product development process. Also, to take operator influence into account, real time models, i.e. simplified and computationally efficient models are required. This in turn, requires stress computation to be efficient if it will be performed during dynamic simulation. The research looks back at the theoretical background of multibody dynamic simulation and finite element method to find suitable parts to form a new approach for efficient stress calculation. This study proposes that, the problem of stress calculation during dynamic simulation can be greatly simplified by using a combination of floating frame of reference formulation with modal superposition and a sub-modeling approach. In practice, the proposed approach can be used to efficiently generate the relevant fatigue assessment stress history for a structural detail during or after dynamic simulation. In this work numerical examples are presented to demonstrate the proposed approach in practice. The results show that approach is applicable and can be used as proposed.

Training executive functions in the laboratory and in real life : cognitive consequences of computer-based exercises and bilingualism

The question of the trainability of executive functions and the impact of such training on related cognitive skills has stirred considerable research interest. Despite a number of studies investigating this, the question has not yet been solved. The general aim of this thesis was to investigate two very different types of training of executive functions: laboratory-based computerized training (Studies I-III) and realworld training through bilingualism (Studies IV-V). Bilingualism as a kind of training of executive functions is based on the idea that managing two languages requires executive resources, and previous studies have suggested a bilingual advantage in executive functions. Three executive functions were studied in the present thesis: updating of working memory (WM) contents, inhibition of irrelevant information, and shifting between tasks and mental sets. Studies I-III investigated the effects of computer-based training of WM updating (Study I), inhibition (Study II), and set shifting (Study III) in healthy young adults. All studies showed increased performance on the trained task. More importantly, improvement on an untrained task tapping the trained executive function (near transfer) was seen in Study I and II. None of the three studies showed improvement on untrained tasks tapping some other cognitive function (far transfer) as a result of training. Study I also used PET to investigate the effects of WM updating training on a neurotransmitter closely linked to WM, namely dopamine. The PET results revealed increased striatal dopamine release during WM updating performance as a result of training. Study IV investigated the ability to inhibit task-irrelevant stimuli in bilinguals and monolinguals by using a dichotic listening task. The results showed that the bilinguals exceeded the monolinguals in inhibiting task-irrelevant information. Study V introduced a new, complementary research approach to study the bilingual executive advantage and its underlying mechanisms. To circumvent the methodological problems related to natural groups design, this approach focuses only on bilinguals and examines whether individual differences in bilingual behavior correlate with executive task performances. Using measures that tap the three above-entioned executive functions, the results suggested that more frequent language switching was associated with better set shifting skills, and earlier acquisition of the second language was related to better inhibition skills. In conclusion, the present behavioral results showed that computer-based training of executive functions can improve performance on the trained task and on closely related tasks, but does not yield a more general improvement of cognitive skills. Moreover, the functional neuroimaging results reveal that WM training modulates striatal dopaminergic function, speaking for training-induced neural plasticity in this important neurotransmitter system. With regard to bilingualism, the results provide further support to the idea that bilingualism can enhance executive functions. In addition, the new complementary research approach proposed here provides some clues as to which aspects of everyday bilingual behavior may be related to the advantage in executive functions in bilingual individuals.

Comparison between dSPACE and NI systems based on real-time intelligent control of a teleoperated hydraulic servo system

The Laboratory of Intelligent Machine researches and develops energy-efficient power transmissions and automation for mobile construction machines and industrial processes. The laboratory's particular areas of expertise include mechatronic machine design using virtual technologies and simulators and demanding industrial robotics. The laboratory has collaborated extensively with industrial actors and it has participated in significant international research projects, particularly in the field of robotics. For years, dSPACE tools were the lonely hardware which was used in the lab to develop different control algorithms in real-time. dSPACE's hardware systems are in widespread use in the automotive industry and are also employed in drives, aerospace, and industrial automation. But new competitors are developing new sophisticated systems and their features convinced the laboratory to test new products. One of these competitors is National Instrument (NI). In order to get to know the specifications and capabilities of NI tools, an agreement was made to test a NI evolutionary system. This system is used to control a 1-D hydraulic slider. The objective of this research project is to develop a control scheme for the teleoperation of a hydraulically driven manipulator, and to implement a control algorithm between human and machine interaction, and machine and task environment interaction both on NI and dSPACE systems simultaneously and to compare the results.

Effect of practice and span length on the dual-task coordination executive test

The measure "mu", proposed as an index of the ability to coordinate concurrent box-crossing (BC) and digit-span (DS) tasks in the dual task (DT), should reflect the capacity of the executive component of the working memory system. We investigated the effect of practice in BC and of a change in the digit span on mu by adding previous practice trials in BC and diminishing, maintaining or increasing the digit sequence length. The mu behavior was evaluated throughout three trials of the test. Reported strategies in digit tasks were also analyzed. Subjects with diminished span showed the best performance in DT due to a stable performance in DS and BC in the single- and dual-task conditions. These subjects also showed a more stable performance throughout trials. Subjects with diminished span tended to employ effortless strategies, whereas subjects with increased span employed effort-requiring strategies and showed the lowest means of mu. Subjects with initial practice trials showed the best performance in BC and the most differentiated performance between the single- and dual-task conditions in BC. The correlation coefficient between the mu values obtained in the first and second trials was 0.814 for subjects with diminished span and practice trials in BC. It seems that the within-session practice in BC and the performance variability in DS affect the reliability of the index mu. To control these factors we propose the introduction of previous practice trials in BC and a modification of the current method to determine the digit sequence length. This proposal should contribute to the development of a more reliable method to evaluate the executive capacity of coordination in the dual-task paradigm.

Power and Performance Management Strategies on NoC-Based Multicore Platforms, Using DVFS, Adaptive Algorithm and Task Parallelism

This work presents synopsis of efficient strategies used in power managements for achieving the most economical power and energy consumption in multicore systems, FPGA and NoC Platforms. In this work, a practical approach was taken, in an effort to validate the significance of the proposed Adaptive Power Management Algorithm (APMA), proposed for system developed, for this thesis project. This system comprise arithmetic and logic unit, up and down counters, adder, state machine and multiplexer. The essence of carrying this project firstly, is to develop a system that will be used for this power management project. Secondly, to perform area and power synopsis of the system on these various scalable technology platforms, UMC 90nm nanotechnology 1.2v, UMC 90nm nanotechnology 1.32v and UMC 0.18 μmNanotechnology 1.80v, in order to examine the difference in area and power consumption of the system on the platforms. Thirdly, to explore various strategies that can be used to reducing system’s power consumption and to propose an adaptive power management algorithm that can be used to reduce the power consumption of the system. The strategies introduced in this work comprise Dynamic Voltage Frequency Scaling (DVFS) and task parallelism. After the system development, it was run on FPGA board, basically NoC Platforms and on these various technology platforms UMC 90nm nanotechnology1.2v, UMC 90nm nanotechnology 1.32v and UMC180 nm nanotechnology 1.80v, the system synthesis was successfully accomplished, the simulated result analysis shows that the system meets all functional requirements, the power consumption and the area utilization were recorded and analyzed in chapter 7 of this work. This work extensively reviewed various strategies for managing power consumption which were quantitative research works by many researchers and companies, it's a mixture of study analysis and experimented lab works, it condensed and presents the whole basic concepts of power management strategy from quality technical papers.

Task-Dependent Oscillatory Brain Activity During Oculomotor Delayed Response Task

This study used three Oculomotor Delayed Response (ODR) tasks to investigate the unique cognitive demands during the delay period. Changes in alpha power were used to index cognitive efforts during the delay period. Continuous EEGs from 25 healthy young adults (18-34 years) were recorded using dense electrode array. The data was analyzed by 6-cycle Morlet wavelet decompositions in the frequency range of 2-30 Hz to create time- frequency decompositions for four midline electrode sites. The 99% confidence intervals using the bootstrapped 20% trimmed mean of the 10 Hz frequency were used to examine the differences among conditions. Compared to two Memory conditions (Match and Non-Match), Control condition yielded significant differences in all frequencies over the entire trial period, suggesting a cognitive state difference. Compared to Match condition, the Non–Match condition had lower alpha activity during the delay period at each midline electrode site reflecting the higher cognitive effort required.

L'effort associé à la reconnaissance de la parole chez les adultes et les personnes aînées

L’objectif principal de cette thèse était de quantifier et comparer l’effort requis pour reconnaître la parole dans le bruit chez les jeunes adultes et les personnes aînées ayant une audition normale et une acuité visuelle normale (avec ou sans lentille de correction de la vue). L’effort associé à la perception de la parole est lié aux ressources attentionnelles et cognitives requises pour comprendre la parole. La première étude (Expérience 1) avait pour but d’évaluer l’effort associé à la reconnaissance auditive de la parole (entendre un locuteur), tandis que la deuxième étude (Expérience 2) avait comme but d’évaluer l’effort associé à la reconnaissance auditivo-visuelle de la parole (entendre et voir le visage d’un locuteur). L’effort fut mesuré de deux façons différentes. D’abord par une approche comportementale faisant appel à un paradigme expérimental nommé double tâche. Il s’agissait d’une tâche de reconnaissance de mot jumelée à une tâche de reconnaissance de patrons vibro-tactiles. De plus, l’effort fut quantifié à l’aide d’un questionnaire demandant aux participants de coter l’effort associé aux tâches comportementales. Les deux mesures d’effort furent utilisées dans deux conditions expérimentales différentes : 1) niveau équivalent – c'est-à-dire lorsque le niveau du bruit masquant la parole était le même pour tous les participants et, 2) performance équivalente – c'est-à-dire lorsque le niveau du bruit fut ajusté afin que les performances à la tâche de reconnaissance de mots soient identiques pour les deux groupes de participant. Les niveaux de performance obtenus pour la tâche vibro-tactile ont révélé que les personnes aînées fournissent plus d’effort que les jeunes adultes pour les deux conditions expérimentales, et ce, quelle que soit la modalité perceptuelle dans laquelle les stimuli de la parole sont présentés (c.-à.-d., auditive seulement ou auditivo-visuelle). Globalement, le ‘coût’ associé aux performances de la tâche vibro-tactile était au plus élevé pour les personnes aînées lorsque la parole était présentée en modalité auditivo-visuelle. Alors que les indices visuels peuvent améliorer la reconnaissance auditivo-visuelle de la parole, nos résultats suggèrent qu’ils peuvent aussi créer une charge additionnelle sur les ressources utilisées pour traiter l’information. Cette charge additionnelle a des conséquences néfastes sur les performances aux tâches de reconnaissance de mots et de patrons vibro-tactiles lorsque celles-ci sont effectuées sous des conditions de double tâche. Conformément aux études antérieures, les coefficients de corrélations effectuées à partir des données de l’Expérience 1 et de l’Expérience 2 soutiennent la notion que les mesures comportementales de double tâche et les réponses aux questionnaires évaluent différentes dimensions de l’effort associé à la reconnaissance de la parole. Comme l’effort associé à la perception de la parole repose sur des facteurs auditifs et cognitifs, une troisième étude fut complétée afin d’explorer si la mémoire auditive de travail contribue à expliquer la variance dans les données portant sur l’effort associé à la perception de la parole. De plus, ces analyses ont permis de comparer les patrons de réponses obtenues pour ces deux facteurs après des jeunes adultes et des personnes aînées. Pour les jeunes adultes, les résultats d’une analyse de régression séquentielle ont démontré qu’une mesure de la capacité auditive (taille de l’empan) était reliée à l’effort, tandis qu’une mesure du traitement auditif (rappel alphabétique) était reliée à la précision avec laquelle les mots étaient reconnus lorsqu’ils étaient présentés sous les conditions de double tâche. Cependant, ces mêmes relations n’étaient pas présentes dans les données obtenues pour le groupe de personnes aînées ni dans les données obtenues lorsque les tâches de reconnaissance de la parole étaient effectuées en modalité auditivo-visuelle. D’autres études sont nécessaires pour identifier les facteurs cognitifs qui sous-tendent l’effort associé à la perception de la parole, et ce, particulièrement chez les personnes aînées.

Évaluation de la régulation de l'oxygénation dans les capillaires de la tête du nerf optique suivant un effort physique dynamique

Il est généralement accepté que les lits vasculaires oculaires auraient la faculté d’autoréguler leur apport sanguin afin de contrebalancer les variations de pression de perfusion oculaire (PPO). Plusieurs études ont tenté d’évaluer ce mécanisme en mesurant les effets d’une variation de la PPO - induite par un exercice ou par une augmentation de la pression intra-oculaire (PIO) à l’aide d’une suction sclérale - sur le débit sanguin oculaire (DSO). Or, les méthodes de mesure du DSO utilisées jusqu'à maintenant présentent de nombreux désavantages et limites, ce qui rend difficile leur usage clinique. De récents développements dans le domaine des investigations non-invasives des paramètres sanguins oculaires proposent un modèle capable de mesurer en temps réel la concentration en oxygène, un autre paramètre important du métabolisme rétinien. Dans le cadre de la présente étude, ce nouveau modèle est utilisé afin de mesurer les effets d’un effort physique dynamique sur la concentration d’oxygène dans les capillaires de la tête du nerf optique (COTNO) de sujets jeunes et en santé. Six jeunes hommes non fumeurs ont participé à l’étude. L’effort physique dynamique consistait en une séance de bicyclette stationnaire de 15 minutes menant à une augmentation du pouls à 160 battements par minute. La COTNO était mesurée avant et immédiatement après la séance d’exercice. La pression artérielle (PA) et la PIO étaient mesurées ponctuellement alors que le pouls et la saturation sanguine en oxygène (SpO2) au niveau digital étaient mesurés tout au long de l’expérience. L’effort physique a entrainé une réduction de la PIO chez tous les sujets, une réduction de la COTNO chez tous les sujets sauf un tandis que la SpO2 demeura constante chez tous les sujets. Une corrélation quadratique entre les variations de la PIO et de la COTNO a pu être notée. Ces résultats suggèrent une corrélation directe entre les variations de la COTNO et celles de la PPO et de la PA. Les résultats de la présente étude suggèrent que les variations de la COTNO chez un sujet en santé suite à un effort physique dynamique pourraient représenter sa capacité à compenser un tel effort. De plus, les changements métaboliques sanguins induits par l’effort physique dynamique pourraient représenter une cause commune aux variations de la PIO et de la COTNO.

Perception d’effort et de mise en charge et asymétrie motrice lors du passage assis à debout chez le sujet hémiparétique

L’asymétrie de mise en charge (MEC) lors du passage assis à debout (PAD) chez les personnes hémiparétiques est une observation clinique connue mais peu expliquée. Ce projet visait donc le développement de connaissances sur les facteurs explicatifs de l’asymétrie de MEC chez cette clientèle en s’intéressant plus spécifiquement au lien entre la distribution des efforts aux genoux lors du PAD et l’asymétrie de MEC observée ainsi qu’à la perception de ces deux éléments lors de cette tâche. Ainsi, les objectifs généraux étaient de : 1) déterminer si l’exécution spontanée asymétrique du PAD des sujets hémiparétiques est expliquée par une distribution des efforts symétriques aux genoux en quantifiant ces efforts par le Taux d’utilisation musculaire électromyographique (TUMEMG) et, 2) déterminer si les individus hémiparétiques sont conscients des stratégies motrices qu’ils utilisent en évaluant leurs perceptions de MEC et d’efforts aux genoux durant le PAD. La première étude a évalué la capacité des personnes hémiparétiques à percevoir leur distribution de MEC aux membres inférieurs lors du PAD. Par rapport aux participants sains, leur distribution de MEC fut davantage asymétrique et leurs erreurs de perception plus élevées. La deuxième étude a quantifié la distribution des efforts aux genoux chez les sujets sains et hémiparétiques lors du PAD spontané. Les deux groupes ont montré une association entre leur distribution de MEC et leur distribution d’effort. Toutefois, la relation était plus faible chez les patients. Le classement des participants hémiparétiques en sous-groupes selon leur degré d’asymétrie de force maximale des extenseurs des genoux (faible, modéré, sévère) a révélé une similarité des efforts aux genoux parétique et non parétique chez le groupe ayant une atteinte sévère. La troisième étude a déterminé si la perception de la distribution des efforts aux genoux des sujets hémiparétiques était reliée à leur distribution réelle d’effort mesurée lors de PAD exécutés dans différentes positions de pieds. En plus d’être incapables de percevoir les changements de distribution d’effort induits par les différentes positions de pieds, leurs erreurs de perception d’effort furent plus élevées que celles de MEC. Par le biais du test fonctionnel assis-debout de cinq répétitions, la dernière étude a déterminé l’influence du nombre de répétitions du PAD sur les distributions de MEC et d’efforts aux genoux chez les sujets sains et hémiparétiques. Contrairement aux contrôles, les distributions des sujets hémiparétiques furent plus asymétriques à la première répétition du test fonctionnel que lors de l’exécution spontanée unique du PAD. En somme, les résultats de cette thèse ont démontré que la distribution des efforts aux genoux doit être considérée parmi les facteurs explicatifs de l’asymétrie de MEC des individus hémiparétiques lors du PAD et qu’il y a un besoin de mieux documenter la perception des personnes hémiparétiques lorsqu’elles exécutent des tâches fonctionnelles.

Recurrence Quantification Analysis of System Signals for Detecting Tool and Chatter in Turning

In this thesis, the applications of the recurrence quantification analysis in metal cutting operation in a lathe, with specific objective to detect tool wear and chatter, are presented.This study is based on the discovery that process dynamics in a lathe is low dimensional chaotic. It implies that the machine dynamics is controllable using principles of chaos theory. This understanding is to revolutionize the feature extraction methodologies used in condition monitoring systems as conventional linear methods or models are incapable of capturing the critical and strange behaviors associated with the metal cutting process.As sensor based approaches provide an automated and cost effective way to monitor and control, an efficient feature extraction methodology based on nonlinear time series analysis is much more demanding. The task here is more complex when the information has to be deduced solely from sensor signals since traditional methods do not address the issue of how to treat noise present in real-world processes and its non-stationarity. In an effort to get over these two issues to the maximum possible, this thesis adopts the recurrence quantification analysis methodology in the study since this feature extraction technique is found to be robust against noise and stationarity in the signals.The work consists of two different sets of experiments in a lathe; set-I and set-2. The experiment, set-I, study the influence of tool wear on the RQA variables whereas the set-2 is carried out to identify the sensitive RQA variables to machine tool chatter followed by its validation in actual cutting. To obtain the bounds of the spectrum of the significant RQA variable values, in set-i, a fresh tool and a worn tool are used for cutting. The first part of the set-2 experiments uses a stepped shaft in order to create chatter at a known location. And the second part uses a conical section having a uniform taper along the axis for creating chatter to onset at some distance from the smaller end by gradually increasing the depth of cut while keeping the spindle speed and feed rate constant.The study concludes by revealing the dependence of certain RQA variables; percent determinism, percent recurrence and entropy, to tool wear and chatter unambiguously. The performances of the results establish this methodology to be viable for detection of tool wear and chatter in metal cutting operation in a lathe. The key reason is that the dynamics of the system under study have been nonlinear and the recurrence quantification analysis can characterize them adequately.This work establishes that principles and practice of machining can be considerably benefited and advanced from using nonlinear dynamics and chaos theory.

Designing in the real world is complex anyway - so what?

Designing is a heterogeneous, fuzzily defined, floating field of various activities and chunks of ideas and knowledge. Available theories about the foundations of designing as presented in "the basic PARADOX" (Jonas and Meyer-Veden 2004) have evoked the impression of Babylonian confusion. We located the reasons for this "mess" in the "non-fit", which is the problematic relation of theories and subject field. There seems to be a comparable interface problem in theory-building as in designing itself. "Complexity" sounds promising, but turns out to be a problematic and not really helpful concept. I will argue for a more precise application of systemic and evolutionary concepts instead, which - in my view - are able to model the underlying generative structures and processes that produce the visible phenomenon of complexity. It does not make sense to introduce a new fashionable meta-concept and to hope for a panacea before having clarified the more basic and still equally problematic older meta-concepts. This paper will take one step away from "theories of what" towards practice and doing and try to have a closer look at existing process models or "theories of how" to design instead. Doing this from a systemic perspective leads to an evolutionary view of the process, which finally allows to specify more clearly the "knowledge gaps" inherent in the design process. This aspect has to be taken into account as constitutive of any attempt at theory-building in design, which can be characterized as a "practice of not-knowing". I conclude, that comprehensive "unified" theories, or methods, or process models run aground on the identified knowledge gaps, which allow neither reliable models of the present, nor reliable projections into the future. Consolation may be found in performing a shift from the effort of adaptation towards strategies of exaptation, which means the development of stocks of alternatives for coping with unpredictable situations in the future.

Perceptual Evaluation of Video-Realistic Speech

abstract With many visual speech animation techniques now available, there is a clear need for systematic perceptual evaluation schemes. We describe here our scheme and its application to a new video-realistic (potentially indistinguishable from real recorded video) visual-speech animation system, called Mary 101. Two types of experiments were performed: a) distinguishing visually between real and synthetic image- sequences of the same utterances, ("Turing tests") and b) gauging visual speech recognition by comparing lip-reading performance of the real and synthetic image-sequences of the same utterances ("Intelligibility tests"). Subjects that were presented randomly with either real or synthetic image-sequences could not tell the synthetic from the real sequences above chance level. The same subjects when asked to lip-read the utterances from the same image-sequences recognized speech from real image-sequences significantly better than from synthetic ones. However, performance for both, real and synthetic, were at levels suggested in the literature on lip-reading. We conclude from the two experiments that the animation of Mary 101 is adequate for providing a percept of a talking head. However, additional effort is required to improve the animation for lip-reading purposes like rehabilitation and language learning. In addition, these two tasks could be considered as explicit and implicit perceptual discrimination tasks. In the explicit task (a), each stimulus is classified directly as a synthetic or real image-sequence by detecting a possible difference between the synthetic and the real image-sequences. The implicit perceptual discrimination task (b) consists of a comparison between visual recognition of speech of real and synthetic image-sequences. Our results suggest that implicit perceptual discrimination is a more sensitive method for discrimination between synthetic and real image-sequences than explicit perceptual discrimination.

Policy gradient based Reinforcement Learning for real autonomous underwater cable tracking

This paper proposes a field application of a high-level reinforcement learning (RL) control system for solving the action selection problem of an autonomous robot in cable tracking task. The learning system is characterized by using a direct policy search method for learning the internal state/action mapping. Policy only algorithms may suffer from long convergence times when dealing with real robotics. In order to speed up the process, the learning phase has been carried out in a simulated environment and, in a second step, the policy has been transferred and tested successfully on a real robot. Future steps plan to continue the learning process on-line while on the real robot while performing the mentioned task. We demonstrate its feasibility with real experiments on the underwater robot ICTINEU AUV

Dynamic task allocation and coordination in cooperative multi-agent environments

La coordinació i assignació de tasques en entorns distribuïts ha estat un punt important de la recerca en els últims anys i aquests temes són el cor dels sistemes multi-agent. Els agents en aquests sistemes necessiten cooperar i considerar els altres agents en les seves accions i decisions. A més a més, els agents han de coordinar-se ells mateixos per complir tasques complexes que necessiten més d'un agent per ser complerta. Aquestes tasques poden ser tan complexes que els agents poden no saber la ubicació de les tasques o el temps que resta abans de que les tasques quedin obsoletes. Els agents poden necessitar utilitzar la comunicació amb l'objectiu de conèixer la tasca en l'entorn, en cas contrari, poden perdre molt de temps per trobar la tasca dins de l'escenari. De forma similar, el procés de presa de decisions distribuït pot ser encara més complexa si l'entorn és dinàmic, amb incertesa i en temps real. En aquesta dissertació, considerem entorns amb sistemes multi-agent amb restriccions i cooperatius (dinàmics, amb incertesa i en temps real). En aquest sentit es proposen dues aproximacions que permeten la coordinació dels agents. La primera és un mecanisme semi-centralitzat basat en tècniques de subhastes combinatòries i la idea principal es minimitzar el cost de les tasques assignades des de l'agent central cap als equips d'agents. Aquest algoritme té en compte les preferències dels agents sobre les tasques. Aquestes preferències estan incloses en el bid enviat per l'agent. La segona és un aproximació d'scheduling totalment descentralitzat. Això permet als agents assignar les seves tasques tenint en compte les preferències temporals sobre les tasques dels agents. En aquest cas, el rendiment del sistema no només depèn de la maximització o del criteri d'optimització, sinó que també depèn de la capacitat dels agents per adaptar les seves assignacions eficientment. Addicionalment, en un entorn dinàmic, els errors d'execució poden succeir a qualsevol pla degut a la incertesa i error de accions individuals. A més, una part indispensable d'un sistema de planificació és la capacitat de re-planificar. Aquesta dissertació també proveeix una aproximació amb re-planificació amb l'objectiu de permetre als agent re-coordinar els seus plans quan els problemes en l'entorn no permeti la execució del pla. Totes aquestes aproximacions s'han portat a terme per permetre als agents assignar i coordinar de forma eficient totes les tasques complexes en un entorn multi-agent cooperatiu, dinàmic i amb incertesa. Totes aquestes aproximacions han demostrat la seva eficiència en experiments duts a terme en l'entorn de simulació RoboCup Rescue.