A Map of Impoundments and Their Primary Purpose on Maine Rivers

http://digitalcommons.colby.edu/atlasofmaine2005/1007/thumbnail.jpg

Optimization analysis of dual-purpose systems

This paper aims to analyze dual-purpose systems focusing the total cost optimization; a superstructure is proposed to present cogeneration systems and desalination technologies alternatives for the synthesis process. The superstructure consists of excluding components, gas turbines or conventional steam generators with excluding alternatives of supplying fuel for each combustion system. Also, backpressure or condensing/extraction steam turbine for supplying process steam could be selected. Finally one desalination unit chosen between electrically-driven or steam-driven reverse osmosis. multi-effect and multistage flash should be included. The analysis herein performed is based on energy and mass conservation equations, as well as the technological limiting equation of equipment. The results for ten different commercial gas turbines revealed that electrically-driven reverse osmosis was always chosen together with both natural gas and gasified biomass gas turbines. (C) 2009 Elsevier B.V. All rights reserved.

Novel Aspects of the Purpose-Built Materials Strategy: Evidence of Topographic Template Effect and Oriented Attachment Growth Mechanism

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Genetic parameters by Bayesian inference for dual purpose Jaffarabadi buffaloes

Knowledge of genetic parameters is essential for improved reproductive management and increased yield. Quantitative analysis of genetic parameters is lacking for many breeds of buffaloes. This article provides the first estimate of genetic parameters for dual purpose (meat and milk) Brazilian Jaffarabadi buffaloes, using Bayesian inference. Data on milk yield (MY), lactation length (LL), weight at 205 days (W205) and 365 (W365) days of age, and average daily gain (ADG) from 205 to 365 days of age were collected in two herds. Bivariate analyses (using the program MTGSAM) were performed with the Gibbs sampler to obtain estimates of variance and covariance. Average lactation milk yield and lactation length were 1 620.2 +/- 450.9 kg and 257.6 +/- 46.8 days, respectively, and the mean values for weight traits (kg) were 181.6 +/- 63.3 (W205), 298.04 +/- 116.1 (W365), and 0.73 +/- 0.35 (ADG). Heritability estimates (modes) were 0.16 for MY, 0.10 for LL, 0.43 for W205, 0.48 for W365 and 0.32 for ADG. There was a high genetic correlation (0.96) between milk yield and lactation length and very high genetic correlations (0.99) between the three growth traits. Our data suggest that both milk production and growth traits have clear potential for yield improvement through direct selection in this dual purpose breed. The selection for weight at an early age would be successful and selection for MY can be performed in the first lactation.

General criteria for selecting hydroelectric generating plant size at multiple-purpose projects

Includes bibliography

Influence of distance, geometry and number of control stations on quality of local geodetic networks for the purpose of georeferencing of rural properties

The implementation of local geodetic networks for georeferencing of rural properties has become a requirement after publication of the Georeferencing Technical Standard by INCRA. According to this standard, the maximum distance of baselines to GNSS L1 receivers is of 20 km. Besides the length of the baseline, the geometry and the number of geodetic control stations are other factors to be considered in the implementation of geodetic networks. Thus, this research aimed to examine the influence of baseline lengths higher than the regulated limit of 20 km, the geometry and the number of control stations on quality of local geodetic networks for georeferencing, and also to demonstrate the importance of using specific tests to evaluate the solution of ambiguities and on the quality of the adjustment. The results indicated that the increasing number of control stations has improved the quality of the network, the geometry has not influenced on the quality and the baseline length has influenced on the quality; however, lengths higher than 20 km has not interrupted the implementation, with GPS L1 receiver, of the local geodetic network for the purpose of georeferencing. Also, the use of different statistical tests, both for the evaluation of the resolution of ambiguities and for the adjustment, have enabled greater clearness in analyzing the results, which allow that unsuitable observations may be eliminated.

Youth purpose and life goals of students engaged in community and social activities

Purpose provides a moral compass for young people to apply their strengths and virtues in their lives. Deepen the studies about youth purpose may contribute to the design of new and more efficient moral education strategies, aiming the development of greater citizenship awareness, social justice and youth engagement in the construction of a society based on democracy, justice and social solidarity. This research paper explores the identification of life goals, the beyond the self or self-oriented purpose in life, a meaningful engagement in purposeful activities and the well-being and satisfaction with life in Brazilian youth engaged and not engaged in social and community issues.

Securitization and Special Purpose Vehicles in an International Setting: a Systemic View

The present work tries to display a comprehensive and comparative study of the different legal and regulatory problems involved in international securitization transactions. First, an introduction to securitization is provided, with the basic elements of the transaction, followed by the different varieties of it, including dynamic securitization and synthetic securitization structures. Together with this introduction to the intricacies of the structure, a insight into the influence of securitization in the financial and economic crisis of 2007-2009 is provided too; as well as an overview of the process of regulatory competition and cooperation that constitutes the framework for the international aspects of securitization. The next Chapter focuses on the aspects that constitute the foundations of structured finance: the inception of the vehicle, and the transfer of risks associated to the securitized assets, with particular emphasis on the validity of those elements, and how a securitization transaction could be threatened at its root. In this sense, special importance is given to the validity of the trust as an instrument of finance, to the assignment of future receivables or receivables in block, and to the importance of formalities for the validity of corporations, trusts, assignments, etc., and the interaction of such formalities contained in general corporate, trust and assignment law with those contemplated under specific securitization regulations. Then, the next Chapter (III) focuses on creditor protection aspects. As such, we provide some insights on the debate on the capital structure of the firm, and its inadequacy to assess the financial soundness problems inherent to securitization. Then, we proceed to analyze the importance of rules on creditor protection in the context of securitization. The corollary is in the rules in case of insolvency. In this sense, we divide the cases where a party involved in the transaction goes bankrupt, from those where the transaction itself collapses. Finally, we focus on the scenario where a substance over form analysis may compromise some of the elements of the structure (notably the limited liability of the sponsor, and/or the transfer of assets) by means of veil piercing, substantive consolidation, or recharacterization theories. Once these elements have been covered, the next Chapters focus on the regulatory aspects involved in the transaction. Chapter IV is more referred to “market” regulations, i.e. those concerned with information disclosure and other rules (appointment of the indenture trustee, and elaboration of a rating by a rating agency) concerning the offering of asset-backed securities to the public. Chapter V, on the other hand, focuses on “prudential” regulation of the entity entrusted with securitizing assets (the so-called Special Purpose vehicle), and other entities involved in the process. Regarding the SPV, a reference is made to licensing requirements, restriction of activities and governance structures to prevent abuses. Regarding the sponsor of the transaction, a focus is made on provisions on sound originating practices, and the servicing function. Finally, we study accounting and banking regulations, including the Basel I and Basel II Frameworks, which determine the consolidation of the SPV, and the de-recognition of the securitized asset from the originating company’s balance-sheet, as well as the posterior treatment of those assets, in particular by banks. Chapters VI-IX are concerned with liability matters. Chapter VI is an introduction to the different sources of liability. Chapter VII focuses on the liability by the SPV and its management for the information supplied to investors, the management of the asset pool, and the breach of loyalty (or fiduciary) duties. Chapter VIII rather refers to the liability of the originator as a result of such information and statements, but also as a result of inadequate and reckless originating or servicing practices. Chapter IX finally focuses on third parties entrusted with the soundness of the transaction towards the market, the so-called gatekeepers. In this respect, we make special emphasis on the liability of indenture trustees, underwriters and rating agencies. Chapters X and XI focus on the international aspects of securitization. Chapter X contains a conflicts of laws analysis of the different aspects of structured finance. In this respect, a study is made of the laws applicable to the vehicle, to the transfer of risks (either by assignment or by means of derivatives contracts), to liability issues; and a study is also made of the competent jurisdiction (and applicable law) in bankruptcy cases; as well as in cases where a substance-over-form is performed. Then, special attention is also devoted to the role of financial and securities regulations; as well as to their territorial limits, and extraterritoriality problems involved. Chapter XI supplements the prior Chapter, for it analyzes the limits to the States’ exercise of regulatory power by the personal and “market” freedoms included in the US Constitution or the EU Treaties. A reference is also made to the (still insufficient) rules from the WTO Framework, and their significance to the States’ recognition and regulation of securitization transactions.

Processing of measured acceleration response for SHM purpose

Structural Health Monitoring (SHM) is the process of characterization for existing civil structures that proposes for damage detection and structural identification. It's based firstly on the collection of data that are inevitably affected by noise. In this work a procedure to denoise the measured acceleration signal is proposed, based on EMD-thresholding techniques. Moreover the velocity and displacement responses are estimated, starting from measured acceleration.

General-Purpose Computing on Graphic Processing Unit (GPGPU): metodi e tecnologie per lo sviluppo di applicazioni

Microprocessori basati su singolo processore (CPU), hanno visto una rapida crescita di performances ed un abbattimento dei costi per circa venti anni. Questi microprocessori hanno portato una potenza di calcolo nell’ordine del GFLOPS (Giga Floating Point Operation per Second) sui PC Desktop e centinaia di GFLOPS su clusters di server. Questa ascesa ha portato nuove funzionalità nei programmi, migliori interfacce utente e tanti altri vantaggi. Tuttavia questa crescita ha subito un brusco rallentamento nel 2003 a causa di consumi energetici sempre più elevati e problemi di dissipazione termica, che hanno impedito incrementi di frequenza di clock. I limiti fisici del silicio erano sempre più vicini. Per ovviare al problema i produttori di CPU (Central Processing Unit) hanno iniziato a progettare microprocessori multicore, scelta che ha avuto un impatto notevole sulla comunità degli sviluppatori, abituati a considerare il software come una serie di comandi sequenziali. Quindi i programmi che avevano sempre giovato di miglioramenti di prestazioni ad ogni nuova generazione di CPU, non hanno avuto incrementi di performance, in quanto essendo eseguiti su un solo core, non beneficiavano dell’intera potenza della CPU. Per sfruttare appieno la potenza delle nuove CPU la programmazione concorrente, precedentemente utilizzata solo su sistemi costosi o supercomputers, è diventata una pratica sempre più utilizzata dagli sviluppatori. Allo stesso tempo, l’industria videoludica ha conquistato una fetta di mercato notevole: solo nel 2013 verranno spesi quasi 100 miliardi di dollari fra hardware e software dedicati al gaming. Le software houses impegnate nello sviluppo di videogames, per rendere i loro titoli più accattivanti, puntano su motori grafici sempre più potenti e spesso scarsamente ottimizzati, rendendoli estremamente esosi in termini di performance. Per questo motivo i produttori di GPU (Graphic Processing Unit), specialmente nell’ultimo decennio, hanno dato vita ad una vera e propria rincorsa alle performances che li ha portati ad ottenere dei prodotti con capacità di calcolo vertiginose. Ma al contrario delle CPU che agli inizi del 2000 intrapresero la strada del multicore per continuare a favorire programmi sequenziali, le GPU sono diventate manycore, ovvero con centinaia e centinaia di piccoli cores che eseguono calcoli in parallelo. Questa immensa capacità di calcolo può essere utilizzata in altri campi applicativi? La risposta è si e l’obiettivo di questa tesi è proprio quello di constatare allo stato attuale, in che modo e con quale efficienza pùo un software generico, avvalersi dell’utilizzo della GPU invece della CPU.

Lateral tires characterization: testing, analytical models and applications for aeronautic purpose

The lateral characteristics of tires in terms of lateral forces as a function of sideslip angle is a focal point in the prediction of ground loads and ground handling aircraft behavior. However, tests to validate such coefficients are not mandatory to obtain Aircraft Type Certification and so they are not available for ATR tires. Anyway, some analytical values are implemented in ATR calculation codes (Flight Qualities in-house numerical code and Loads in-house numerical code). Hence, the goal of my work is to further investigate and validate lateral tires characteristics by means of: exploitation and re-parameterization of existing test on NLG tires, implementation of easy-handle model based on DFDR parameters to compute sideslip angles, application of this model to compute lateral loads on existing flight tests and incident cases, analysis of results. The last part of this work is dedicated to the preliminary study of a methodology to perform a test to retrieve lateral tire loads during ground turning with minimum requirements in terms of aircraft test instrumentation. This represents the basis for future works.

Un sensore multi-purpose: l'accelerometro

questa tesi propone una prospettiva completa sull'accelerometro, descrivendone le caratteristiche le tipologie, gli utilizzi che se ne possono fare e gli ambiti di applicazione. Sviluppa anche argomenti che riguardano interfacce e piattaforme per l'interazione con il sensore e algoritmi machine learning.

Tecnologie per la mobilità verso un middleware general-purpose

L'obiettivo della tesi è esplorare i più avanzati dispositivi, sensori e processori per la computazione spaziale, correlarli con i modelli di spatial computing, e derivarne un'architettura concettuale di middleware distribuito che possa supportare le più avanzate applicazioni in mobilità.