The Comprehensive Standardization of the Graphic Industry Production Chain in the Printing House

The purpose of this thesis was to investigate Job Definition Format (JDF) and how it could be used in printing house's systems. JDF is a very new information exchange standard, and it gives a lot of opportunities to the printing industry. JDF is the first standard, that has an ability to carry a print job from genesis through completion. Besides, JDF has an ability to bridge the communication gap between production and management information services. In the study of JDF we focused on examining how JDF will effect on printing industry .The thesis also examines printing houses's systems ability to work with JDF standard. The result of the study is a comprehensive picture, what is JDF. We also researched the system developers' visions, how JDF will effect on their products in the future.

Searching for targets for the systemic therapy of mesothelioma.

Malignant mesothelioma is an incurable disease associated with asbestos exposure arising in the pleural cavity and less frequently in the peritoneal cavity. Platinum-based combination chemotherapy with pemetrexed is the established standard of care. Multimodality approaches including surgery and radiotherapy are being investigated. Increasing knowledge about the molecular characteristics of mesothelioma had led to the identification of novel potential targets for systemic therapy. Current evidence suggests pathways activated in response to merlin deficiency, including Pi3K/mTOR and the focal adhesion kinase, as well as immunotherapeutic approaches to be most promising. This review elaborates on the rationale behind targeted approaches that have been and are undergoing exploration in mesothelioma and summarizes available clinical results and ongoing efforts to improve the systemic therapy of mesothelioma.

BRAF Alterations as Therapeutic Targets in Non-Small-Cell Lung Cancer.

BACKGROUND: Several subsets of non-small-cell lung cancer (NSCLC) are defined by molecular alterations acting as tumor drivers, some of them being currently therapeutically actionable. The rat sarcoma (RAS)-rapidly accelerated fibrosarcoma (RAF)-mitogen-activated protein/extracellular signal-regulated kinase kinase (MEK)-extracellular signal-regulated kinase (ERK) pathway constitutes an attractive potential target, as v-Raf murine sarcoma viral oncogene homolog B (BRAF) mutations occur in 2-4% of NSCLC adenocarcinoma. METHODS: Here, we review the latest clinical data on BRAF serine/threonine kinase inhibitors in NSCLC. RESULTS: Treatment of V600E BRAF-mutated NSCLC with BRAF inhibitor monotherapy demonstrated encouraging antitumor activity. Combination of BRAF and MEK inhibitors using dabrafenib and trametinib is under evaluation. Preliminary data suggest superior efficacy compared with BRAF inhibitor monotherapy. CONCLUSION: Targeting BRAF alterations represents a promising new therapeutic approach for a restricted subset of oncogene-addicted NSCLC. Prospect ive trials refining this strategy are ongoing. A next step will probably aim at combining BRAF inhibitors and immunotherapy or alternatively improve a multilevel mitogen-activated protein kinase (MAPK) pathway blockade by combining with ERK inhibitors.

Interleukin-22 is increased in multiple sclerosis patients and targets astrocytes.

BACKGROUND: Increasing evidences link T helper 17 (Th17) cells with multiple sclerosis (MS). In this context, interleukin-22 (IL-22), a Th17-linked cytokine, has been implicated in blood brain barrier breakdown and lymphocyte infiltration. Furthermore, polymorphism between MS patients and controls has been recently described in the gene coding for IL-22 binding protein (IL-22BP). Here, we aimed to better characterize IL-22 in the context of MS. METHODS: IL-22 and IL-22BP expressions were assessed by ELISA and qPCR in the following compartments of MS patients and control subjects: (1) the serum, (2) the cerebrospinal fluid, and (3) immune cells of peripheral blood. Identification of the IL-22 receptor subunit, IL-22R1, was performed by immunohistochemistry and immunofluorescence in human brain tissues and human primary astrocytes. The role of IL-22 on human primary astrocytes was evaluated using 7-AAD and annexin V, markers of cell viability and apoptosis, respectively. RESULTS: In a cohort of 141 MS patients and healthy control (HC) subjects, we found that serum levels of IL-22 were significantly higher in relapsing MS patients than in HC but also remitting and progressive MS patients. Monocytes and monocyte-derived dendritic cells contained an enhanced expression of mRNA coding for IL-22BP as compared to HC. Using immunohistochemistry and confocal microscopy, we found that IL-22 and its receptor were detected on astrocytes of brain tissues from both control subjects and MS patients, although in the latter, the expression was higher around blood vessels and in MS plaques. Cytometry-based functional assays revealed that addition of IL-22 improved the survival of human primary astrocytes. Furthermore, tumor necrosis factor α-treated astrocytes had a better long-term survival capacity upon IL-22 co-treatment. This protective effect of IL-22 seemed to be conferred, at least partially, by a decreased apoptosis. CONCLUSIONS: We show that (1) there is a dysregulation in the expression of IL-22 and its antagonist, IL-22BP, in MS patients, (2) IL-22 targets specifically astrocytes in the human brain, and (3) this cytokine confers an increased survival of the latter cells.

Characterization of the HIV protease inhibitor Nelfinavir cellular targets

The HIV protease inhibitors (HIV-PIs) are among the most potent antiviral drugs for the HIV infection. Treatment of patients with HIV-PIs has been linked with development of side effects including dyslipidemia, lipodystrophy syndrome and cardiovascular complications. Moreover, these drugs have shown anti-tumoral activity in non-infected patients but little is known about the involved molecular mechanism for these off-target effects. Here we propose that the HIV-PI Nelfinavir could block a cellular protease thus causing the observed phenotypes. We firstly focus our attention on a cellular protein, DDI2, showing sequence and structural conservation with the HIV protease. We applied cellular and in vitro approaches to produce a correctly folded recombinant protein in order to investigate the presence of a proteolytic activity. Despite the fact that we could identify two techniques that can be applied to produce a folded recombinant DDI2, no proteolytic activity has been identified in the present study. However, we could observe that decreasing the DDI2 levels recapitulated some phenotype observed in presence of HIV-PIs, including the phosphorylation of the protein translation regulators eIF2a and eEF2. As an alternative approach to identify cellular targets for HIV-PIs, we applied a proteomic screening called Slice-SILAC. We focused our attention on the defective maturation of Lamin A, a member of the nuclear lamina, induced by the block of the cellular protease Zmpste24. We demonstrated that Nelfinavir induced accumulation of Prelamin A and nuclear shape defects and in addition caused presence of cytosolic DNA, probably due to TREX1 downregulation. We showed that these phenotypes correlated with activation of the AIM2 inflammasome and IL-lß release. These findings suggest that DDI2 and Zmpste24 are direct or indirect cellular targets for the HIV-PIs and indicate a possible role for these proteins in promoting off-target effects and anti¬tumoral activity observed in HIV-PI treated patients. -- Les inhibiteurs de la protéase du VIH (IP-VIH) sont parmi les médicaments antiviraux les plus efficaces pour l'infection par le VIH. Le traitement des patients avec les IP-VIH cause des effets secondaires comprenant la dyslipidémie, le syndrome de lipodystrophie et les complications cardio-vasculaires. De plus, ces médicaments ont montré une activité anti-tumorale chez les patients non infectés, toutefois le mécanisme moléculaire impliqué dans ces effets hors-cible reste inconnu. Nous proposons que l'IP-VIH Nelfinavir puisse bloquer une protéase cellulaire provoquant les phénotypes observés. De ce fait, nous avons concentré notre attention sur une protéine cellulaire, DDI2, qui possède une séquence et une structure proche de celle de la protéase du VIH. Nous avons appliqué des approches cellulaire et in vitro pour produire une protéine recombinante correctement repliée afin d'étudier son activité protéolytique. Malgré le fait que nous avons pu identifier deux techniques qui peuvent être appliquées pour produire une protéine DDI2 recombinante correctement repliée, aucune activité protéolytique n'a été identifiée dans la présente étude. De plus, nous avons pu observer que la réduction de DDI2 récapitule les phénotypes observé avec le IP-VIH, y compris les phosphorylations de eIF2a et eEF2, impliquées dans la régulation de la traduction protéique. Une approche alternative, appelée Slice-SILAC, a été utilisée afin d'identifier de nouvelles cibles cellulaires du Nelfinavir. Nous avons concentré notre attention sur la maturation défectueuse de la Lamine A, un membre de la lamine nucléaire, induite par l'inhibition de la protéase cellulaire Zmpste24. Nous avons démontré que le Nelfinavir induit une accumulation de Prélamine A déformant la membrane nucléaire et la présence d'ADN cytosolique, probablement en raison de la régulation négative de TREX1. Nous avons montré que ces phénotypes causent l'activation de l'inflammasome AIM2 et la sécrétion d'IL-lß. Ces résultats suggèrent que DDI2 et Zmpste24 sont des cibles cellulaires pour les IP-VIH et indiquent un possible rôle pour ces protéines dans l'apparition d'effets secondaires ainsi que dans l'activité anti-tumorale observée chez les patients traités avec les IP-VIH.

Quality potential of DIP and hardwood CTMP based raw materials in woodcontaining printing paper

The objective of the thesis was to define the quality potential of DIP and hardwood CTMP based raw material furnish for a printing paper production and to define the end product's pulp-based boundary conditions especially when thinking of Chinese markets. Although the Chinese paper industry expands rapidly, the production of some paper grades is still exiguous. Especially the softwood resources are limited in Asia, thus the purpose of the thesis was to find out the possibilities to produce printing paper in China from local raw materials. Bleached CTMP can be produced, for example, from fast-growing hardwood species like eucalyptus and poplar. Therefore in this thesis it was examined if good quality printing paper is possible to produce by using deinked pulp and hardwood CTMP based furnish. In the first section of experimental part, various deinked pulps and chemithermomechanical pulps were compared. The deinked pulps were from China, Central Europe and Finland. Central European was made for magazine papers, and the Chinese as well as the Finnish pulps were made for newsprints. Two of the BCTMPs were from China and those both were made from poplar, whereas one BCTMP was made from eucalyptus in a pilot plant. There were significant differences especially between BCTMPs and their paper properties. In the second section of experimental part, the deinked pulp and eucalyptus BCTMP were blended to produce handsheets. The results show that producing the highest quality printing paper would be difficult from these raw materials. Deinked pulp affected especially the strength and optical properties as well as calender blackening. The BCTMP was found to have effects mostly on the smoothness, strength and optical properties as well as calender blackening.

Further molecular profiling of tumors harboring therapeutic targets within non-small cell lung cancer

Background: Treatment of NSCLC has been revolutionized in recent years with the introduction of several targeted therapies for selected genetically altered subtypes of NSCLC. A better understanding of molecular characteristics of NSCLC, which features common drug targets, may identify new therapeutic options. Methods: Over 6,700 non-small cell lung cancer cases referred to Caris Life Sciences between 2009 and 2014. Diagnoses and history were collected from referring physicians. Specific testing was performed per physician request and included a combination of sequencing (Sanger, NGS or pyrosequencing), protein expression (IHC), gene amplification/rearrangement (CISH or FISH), and/or RNA fragment analysis. Results: Tumors profiles from patients with hormone receptor positive disease (HER2, ER, PR, or AR positive by IHC) (n=629), HER2 mutations (n=8) ALK rearrangements (n=55), ROS1 rearrangement (n=17), cMET amplification or mutation (n=126), and cKIT mutation (n=11) were included in this analysis and compared to the whole cohort. Tumors with ALK rearrangement overexpressed AR in 18% of cases, and 7% presented with concomitant KRAS mutation. Lower rates of PTEN loss, as assessed by IHC, were observed in ALK positive (20%), ROS1 positive (9%) and cKIT mutated tumors (25%) compared to the overall NSCLC population (58%). cMET was overexpressed in 66% of ROS1 translocated and 57% of HER2 mutated tumors. cKIT mutations were found co-existing with APC (20%) and EGFR (20%) mutations. Pathway analysis revealed that hormone receptor positive disease carried more mutations in the ERK pathway (32%) compared to 9% in the mTOR pathway. 25% of patients with HER2 mutations harbored a co-existing mutation in the mTOR pathway. Conclusions: Pathway profiling reveals that NSCLC tumors present more often than reported with several concomitant alterations affecting the ERK or AKT pathway. Additionally, they are also characterized by the expression of potential biological modifiers of the cell cycle like hormonal receptors, representing a rationale for dual inhibition strategies in selected patients. Further refining of the understanding of NSCLC biomarker profile will optimize research for new treatment strategies.

The HIV care cascade in Switzerland: reaching the UNAIDS/WHO targets for patients diagnosed with HIV.

OBJECTIVES: To describe the HIV care cascade for Switzerland in the year 2012. DESIGN/METHODS: Six levels were defined: (i) HIV-infected, (ii) HIV-diagnosed, (iii) linked to care, (iv) retained in care, (v) on antiretroviral treatment (ART), and (vi) with suppressed viral load. We used data from the Swiss HIV Cohort Study (SHCS) complemented by a nationwide survey among SHCS physicians to estimate the number of HIV-patients not registered in the cohort. We also used Swiss ART sales data to estimate the number of patients treated outside the SHCS network. Based on the number of patients retained in care, we inferred the estimates for levels (i) to (iii) from previously published data. RESULTS: We estimate that (i) 15 200 HIV-infected individuals lived in Switzerland in 2012 (margins of uncertainty, 13 400-19 300). Of those, (ii) 12 300 (81%) were diagnosed, (iii) 12 200 (80%) linked, and (iv) 11 900 (79%) retained in care. Broadly based on SHCS network data, (v) 10 800 (71%) patients were receiving ART, and (vi) 10 400 (68%) had suppressed (<200 copies/ml) viral loads. The vast majority (95%) of patients retained in care were followed within the SHCS network, with 76% registered in the cohort. CONCLUSION: Our estimate for HIV-infected individuals in Switzerland is substantially lower than previously reported, halving previous national HIV prevalence estimates to 0.2%. In Switzerland in 2012, 91% of patients in care were receiving ART, and 96% of patients on ART had suppressed viral load, meeting recent UNAIDS/WHO targets.

Validation of plant dynamic model by online and laboratory measurements – a tool to predict online COD loads out of production of mechanical printing papers

COD discharges out of processes have increased in line with elevating brightness demands for mechanical pulp and papers. The share of lignin-like substances in COD discharges is on average 75%. In this thesis, a plant dynamic model was created and validated as a means to predict COD loading and discharges out of a mill. The assays were carried out in one paper mill integrate producing mechanical printing papers. The objective in the modeling of plant dynamics was to predict day averages of COD load and discharges out of mills. This means that online data, like 1) the level of large storage towers of pulp and white water 2) pulp dosages, 3) production rates and 4) internal white water flows and discharges were used to create transients into the balances of solids and white water, referred to as “plant dynamics”. A conversion coefficient was verified between TOC and COD. The conversion coefficient was used for predicting the flows from TOC to COD to the waste water treatment plant. The COD load was modeled with similar uncertainty as in reference TOC sampling. The water balance of waste water treatment was validated by the reference concentration of COD. The difference of COD predictions against references was within the same deviation of TOC-predictions. The modeled yield losses and retention values of TOC in pulping and bleaching processes and the modeled fixing of colloidal TOC to solids between the pulping plant and the aeration basin in the waste water treatment plant were similar to references presented in literature. The valid water balances of the waste water treatment plant and the reduction model of lignin-like substances produced a valid prediction of COD discharges out of the mill. A 30% increase in the release of lignin-like substances in the form of production problems was observed in pulping and bleaching processes. The same increase was observed in COD discharges out of waste water treatment. In the prediction of annual COD discharge, it was noticed that the reduction of lignin has a wide deviation from year to year and from one mill to another. This made it difficult to compare the parameters of COD discharges validated in plant dynamic simulation with another mill producing mechanical printing papers. However, a trend of moving from unbleached towards high-brightness TMP in COD discharges was valid.

Spottier Targets Are Less Attractive to Tabanid Flies: On the Tabanid-Repellency of Spotty Fur Patterns

During blood-sucking, female members of the family Tabanidae transmit pathogens of serious diseases and annoy their host animals so strongly that they cannot graze, thus the health of the hosts is drastically reduced. Consequently, a tabanid-resistant coat with appropriate brightness, colour and pattern is advantageous for the host. Spotty coats are widespread among mammals, especially in cattle (Bos primigenius). In field experiments we studied the influence of the size and number of spots on the attractiveness of test surfaces to tabanids that are attracted to linearly polarized light. We measured the reflection-polarization characteristics of living cattle, spotty cattle coats and the used test surfaces. We show here that the smaller and the more numerous the spots, the less attractive the target (host) is to tabanids. We demonstrate that the attractiveness of spotty patterns to tabanids is also reduced if the target exhibits spottiness only in the angle of polarization pattern, while being homogeneous grey with a constant high degree of polarization. Tabanid flies respond strongly to linearly polarized light, and we show that bright and dark parts of cattle coats reflect light with different degrees and angles of polarization that in combination with dark spots on a bright coat surface disrupt the attractiveness to tabanids. This could be one of the possible evolutionary benefits that explains why spotty coat patterns are so widespread in mammals, especially in ungulates, many species of which are tabanid hosts

Effects of Surface Properties and Wood Modification into Direct Printing on Wood

Building industry is a high volume branch which could provide prominent markets for wood based interior decoration solutions. Competition in interior decoration markets requires versatility in appearance. Versatility in wood appearance and added value could be achieved by printing grain patterns of different species or images directly onto wood. The problem when planning wood printing’s implementing into durable applications is basically how to transfer a high quality image or print sustainably onto wood, which is porous, heterogeneous, dimensionally unstable, non-white and rough. Wood preservation or treating, and modification can provide durability against degradation but also effect to the surface properties of wood which will effect on printability. Optimal adhesion is essential into print quality, as too high ink absorbance can cause spreading and too low ink absorbance cause pale prints. Different printing techniques have different requirements on materials and production. The direct printing on wood means, that intermedias are not used. Printing techniques with flexible printing plates or in fact non-impact techniques provide the best basis for wood printing. Inkjet printing of wood with different mechanical or chemical surface treatments, and wood plastic composite material gave good results that encourage further studies of the subject. Sanding the wood surface anti-parallel to the grain gave the best overall printing quality. Spreading parallel to the grain could not be avoided totally, except in cases where wood was treated hydrophobic so adhesion of the ink was not sufficient. Grain pattern of the underlying wood stays clearly visible in the printed images. Further studies should be made to fine tune the methods that already gave good results. Also effects of moisture content of wood, different inks, and long-term exposure to UV-radiation should be tested.

Role of ErbB2 and ErbB4 in Cancer Growth, Prognosis and as Targets for Immunotherapy

ErbB receptors (EGFR, ErbB2, ErbB3 and ErbB4) are growth factor receptors that regulate signals of cell differentiation, proliferation, migration and survival. Inappropriate activation of these receptors is associated with the development and severity of many cancers and has prognostic and predictive value in cancer therapy. Drugs, such as therapeutic antibodies, targeted against EGFR and ErbB2, are currently used in therapy of breast, colorectal and head and neck cancers. The role of ErbB4 in tumorigenesis has remained relatively poorly understood. Alternative splicing produces four different isoforms of one ErbB4 gene. These isoforms (JM-a, JM-b, CYT-1 and CYT-2) are functionally dissimilar and proposed to have different roles in carcinogenesis. The juxtamembrane form JM-a undergoes regulated intramembrane proteolysis producing a soluble receptor ectodomain and an intracellular domain that translocates into the nucleus and regulates transcription. Nuclear signaling via JM-a isoform stimulates cancer cell proliferation. This study aimed to develop antibodies targeting the proposed oncogenic ErbB4 JM-a isoform that show potential in inhibiting ErbB4 dependent tumorigenesis. Also, the clinical relevance of ErbB4 shedding in cancer was studied. The currently used monoclonal antibody trastuzumab, targeting ErbB2, has shown efficacy in breast cancer therapy. In this study novel tissues with ErbB2 amplification and trastuzumab sensitivity were analyzed. The results of this study indicated that a subpopulation of breast cancer patients demonstrate increased shedding and cleavage of ErbB4. A JM-a isoform-specific antibody that inhibited ErbB4 shedding and consequent activation of ErbB4 had anti-tumor activity both in vitro and in vivo. Thus, ErbB4 shedding associates with tumor growth and specific targeting of the cleavable JM-a isoform could be considered as a strategy for developing novel ErbB-based cancer drugs. In addition, it was demonstrated that ErbB2 amplification is common in intestinal type gastric cancers with poor clinical outcome. Trastuzumab inhibited growth of gastric and breast cancer cells with equal efficacy. Thus, ErbB2 may be a useful target in gastric cancer.

High-Throughput Screening for Novel Prostate Cancer Drug Targets –Getting Personal

Prostate cancers form a heterogeneous group of diseases and there is a need for novel biomarkers, and for more efficient and targeted methods of treatment. In this thesis, the potential of microarray data, RNA interference (RNAi) and compound screens were utilized in order to identify novel biomarkers, drug targets and drugs for future personalized prostate cancer therapeutics. First, a bioinformatic mRNA expression analysis covering 9873 human tissue and cell samples, including 349 prostate cancer and 147 normal prostate samples, was used to distinguish in silico prevalidated putative prostate cancer biomarkers and drug targets. Second, RNAi based high-throughput (HT) functional profiling of 295 prostate and prostate cancer tissue specific genes was performed in cultured prostate cancer cells. Third, a HT compound screen approach using a library of 4910 drugs and drug-like molecules was exploited to identify potential drugs inhibiting prostate cancer cell growth. Nine candidate drug targets, with biomarker potential, and one cancer selective compound were validated in vitro and in vivo. In addition to androgen receptor (AR) signaling, endoplasmic reticulum (ER) function, arachidonic acid (AA) pathway, redox homeostasis and mitosis were identified as vital processes in prostate cancer cells. ERG oncogene positive cancer cells exhibited sensitivity to induction of oxidative and ER stress, whereas advanced and castrate-resistant prostate cancer (CRPC) could be potentially targeted through AR signaling and mitosis. In conclusion, this thesis illustrates the power of systems biological data analysis in the discovery of potential vulnerabilities present in prostate cancer cells, as well as novel options for personalized cancer management.

Consumer Attitudes on Aroma Printing

Olfactory packaging is an emerging technology which uses the aromatic capsules to release various scents. Normally, manufacturers add these aromatic capsules in the printing ink, the label or packaging material itself. When the aromatic capsules meet suitable release triggers, the scents will be released. The common release triggers are external forces, temperature changes, humidity changes and so on. The aim for this Masters of Science Thesis is to understand the aroma printing technology from literature and make market research for this kind of technology. The main target is to collect the current technology principle of aroma packaging and figure out how they are implemented on products with those. In addition, an investigation is made about consumers' attitudes from Chinese and Finnish market through the questionnaire, and the market potential is analyzed as well. The key points researched in this work are: the general attitudes on aroma printing technology, market potential and economic possibilities. This thesis specifies the main technologies used in aroma printing, the solutions of products with aroma packaging and the original results of the questionnaires. It also includes analysis of the acceptance of Chinese and Finnish consumers, what are their opinions of the aroma printing technology and the products packed by aroma printing technology. In addition, various factors which impact the market is discussed in the thesis. At last, some comparisons are made from the point of views of similarities and differences between Chinese and Finnish market.