919 resultados para potencial da água
Resumo:
In this work thiosemicarbazones [4-N-cinnamoyl-thiosemicarbazone (CTSC), 4-N-(2'-methoxycinnamoyl)-thiosemicarbazone (MCTSC), and 4-N-(4'-hydroxy-3'-methoxybenzoyl)-thiosemicarbazone (HMBTSC)] were solubilized in an microemulsion system (ME_OCS) which is rich in aqueous phase (O/W system). The system ME_OCS was obtained with saponified coconut oil (OCS) as (surfactant), butanol (cosurfactant), and kerosene as oil phase (Fo), using 40% of C/T (cosurfactant/surfactant), 5% of Fo and 55% of aqueous phase. The microemulsions systems CTSC_ME_OCS, MCTSC_ME_OCS and HMBTSC_ME_OCS effectiveness on a AISI 1020 carbon steel corrosion inhibition process were evaluated in a saline solution (NaCl 0.5%), using a galavostatic method. The tested thiosemicarbazones (TSC) showed highest inhibitors effects (85.7% for CTSC_ME_OCS, 84.0% for MCTSC_ME_OCS, and 83.3% HMBTSC_ME_OCS) at lower concentrations [0.19% of CTSC, 0.07% (MCTSC), and 0.26% (HMBTSC)]. Comparatively, the surfactant OCS (solubilized in H2O) as well as the system ME_OCS showed lower efficacy [71% for OCS (at 0.20 - 0.25% of concentration) and 74% for ME_OCS (at 0.5% of concentration)]. Since the microemulsion systems ME_OCS showed satisfactory interfacial adsorption, the greatest inhibitory effect of those TSC_ME_OCS systems could be correlated to both chemical composition of each tested TSC (which is rich in heteroatoms and aromatic ring) and also the presence of the surfactant OCS
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Produced water has lately aroused interest due to their high degree of salinity, suspended oil particles, chemicals added in various manufacturing processes, heavy metals and radioactivity sometimes. Along with oil and due to its high volume production, water production is one of the pollutants of most concern in the process of oil extraction. PAHs due to their ubiquity and their characteristics carcinogenic or mutagenic and teratogenic even have attracted the attention of every scientific society. Formed from the incomplete combustion of organic matter may be natural or anthropogenic. Some materials have been researched with the goal of cleaning up environmental matrices that may be contaminated by hydrocarbons. Among these materials researched various clays have been employed, of which highlights the vermiculite. The family of phyllosilicates, vermiculite for its potential and its high hydrophobic surface area has been a tool widely used in the decontamination of water in processes of oil spills. However, when it loses its capacity expanded hydrophobic having the necessity of using a hidrofobizante to make it organophilic. Among the numerous hidrofobizantes researched and used the linseed oil was the pioneer. In this study sought to evaluate the capacity of removal of PAHs using the vermiculite hydrofobized with linseed oil and wax also, for it was made use of the 24 full factorial design as the main tool for the experiments. We also evaluated the clay grain size (-20 +48 and -48 +80 #), the percentage of hidrofobizante applied (5 and 10%) and salinity of the water produced synthesized in our laboratory (35,000 and 55,000 ppm). The molecular fluorescence spectroscopy due to its sensitivity and speed was used to verify the adsorption capacity of clay, as well as gas chromatography served as an auxiliary technique to identify and quantify the PAHs in solution. In order to characterize the vermiculite was made use of X-ray fluorescence and X-ray diffraction. The infrared and thermogravimetry were essential to note hydrophobization and the amount of coating of clay. According to the fluorescence analysis showed that the test 12 was the best result in about 98% adsorption of fluorescent compounds, however the high salinity, the smallest particle size, the highest percentage of hidrofobizante and the use of linseed oil showed greater efficiency in the removal capacity of these hydrocarbons, in accordance with the trend followed by the analysis of the major factors of the factorial design. To verify the adsorption capacity of clay using a fixed volume of water produced synthetically, used as the test base 12, at their respective levels and factors. Thus, it was observed that after adding about 1 ½ liters of water solution produced synthetically, about 300 times its volume in mass, the vermiculite was able to adsorb 80% of fluorescent species present in solution
Resumo:
Among the various layered silicates, vermiculite has been used as one of the adsorbent material by presenting the ion exchange capacity which facilitates the removal of organic compounds which are potential pollutants in relation to the water surface. The importance of the modification of clay minerals by hydrophobization with carnauba wax establishes the increase in oil removal capacity in aqueous medium, it contributes to a better environment for life in ecosystems. The vermiculite when expanded decreases its hydrophobicity requiring the use of a hydrophobizing leaving - the organoclay. In this work were used in the process of modifying the particle sizes of vermiculite -18+16, -16 +20 and -20 +35 #. Samples of vermiculite hydrophobized with carnauba wax and clay mineral without hydrophobizing were characterized with physicochemical analyzes and analytical. Techniques were used: thermal analysis (thermogravimetry and derivative thermogravimetry), infrared spectroscopy, scanning electron microscopy, fluorescence rays - x adsorption tests. The TG / DTG was used to evaluate the thermal behavior of expanded vermiculite and carnauba wax and samples hidrofobizadas with percentages of 5, 10 and 15 % by weight of hydrophobizing. The results of FTIR confirmed increase of the characteristic signs of carnauba wax in samples hidrofobizadas as the greatest amount of hydrophobizing the clay mineral used in hydrophobization. Thermogravimetry and FTIR show based on the results that coating the surface of the vermiculite occur homogeneously. The data obtained by the technique of x-ray fluorescence with loss on ignition confirmed the results of thermogravimetric analysis in relation to the percentage of wax incorporated. The fluorescence indicates through information provided by the analysis shows that the material covered - is homogeneous. The mev inspection was used to texture and morphology of the clay mineral with and without carnauba wax. The scanning electron microscopy confirms the deposition of wax evenly over the surface of the mineral as indicated by the other techniques. To verify the adsorption capacity of the clay without hydrophobizing hydrophobized and used a fixed volume of water to 1 ½ liters in each experiment with 3 g to 50 g of oil sample. The results show that better extraction of oil for the material processed corresponds to 260 % relative to the weight of the sample coated and greater than 80 % of the oil drop in the system
Resumo:
This study aimed to analyze the phytoremediation potential of Eichhornia crassipes in natural environments, optimize the extraction process of crude protein from plant tissue and, obtain and characterize this process in order to determine its viability of use instead of the protein sources of animal and/or human feed. For this, it has been determined in Apodi/Mossoró river water the concentration of ammonium ions, nitrite, nitrate, calcium, magnesium, potassium, iron, copper, manganese, zinc, nickel, cobalt, sodium, aluminum, cádmium, lead, and total chromium; It was determined in plant tissue of aquatic macrophytes of Eichhornia crassipes species present in Apodi/Mossoró River the moisture content, ash, calcium, magnesium, potassium, iron, copper, manganese, zinc, nickel, cobalt, sodium, aluminum, cadmium, lead, total chromium, total nitrogen and crude protein. It was also determined the translocation factor and bioaccumulation of all the quantified elements; It was developed and optimized the extraction procedure of crude protein based on the isoelectric method and a factorial design 24 with repetition; It was extracted and characterized the extract obtained by determining the moisture content, ash, magnesium, potassium, iron, copper, manganese, zinc, nickel, cobalt, sodium, cadmium, total nitrogen and crude protein. And finally, it was also characterized the protein extract using Thermogravimetric Analysis (TG), Derived Thermogravimetric (DTG), Differential Scanning Calorimetry (DSC), Infrared Spectroscopy (FT-IR) and jelly-like electrophoresis of polyacrylamide (SDS -PAGE) to assess the their molecular weights/mass. Thus, from the results obtained for the translocation and bioaccumulation factors was found that the same can be used as phytoremediation agent in natural environments of all quantified elements. It was also found that the developed method of extraction and protein precipitation was satisfactory for the purpose of the work, which gave the best conditions of extraction and precipitation of proteins as: pH extraction equal to 13.0, extraction temperature equals 60 ° C, reaction time equals to 30 minutes, and pH precipitation equals to 4.0. As for the extract obtained, the total nitrogen and crude protein were quantified higher than those found in the plant, increasing the crude protein content approximately 116.88% in relation to the quantified contente in the vegetal tissue of macrophyte. The levels of nickel and cadmium were the unique that were found below the detection limit of used the equipment. The electrophoretic analysis allowed us to observe that the protein extract obtained is composed of low polypeptide chains by the molecular and phytochelatins, with 6 and 15 kDa bands. Analysis of TG, DTG, DSC and FT-IR showed similarities in protein content of the obtained extracts based on different collection points and 9 parts of the plant under study, as well as commercial soy protein and casein. Finally, based on all these findings, it was concluded that the obtained extract in this work can be used instead of the protein sources of animal feed should, before that, test its digestibility. As human supplementation, it is necessary to conduct more tests associated with the optimization process in the sense of removing undesirable components and constant monitoring of the water body and the raw material used
Resumo:
The current environmental crisis demands transformations in the relations among society, nature and development, considering sustainability. In this context, an important theme is replacing fossil fuels with biofuels, such as biodiesel. Moringa oleifera Lam. is a species that can be used as a raw material to produce biodiesel. Besides, it is a multiple purposes plant, which can be used also in water treatment. Thus, the aims of this work were to analyze the anatomical adaptations found in the stem and in the leaf and the seed s oil stores of M. oleifera., to investigate chemical characteristics of M. oleifera s seed oil, considering biodiesel production, and to evaluate the coagulation activity of these seeds in water treatment. Semipermanent histological laminas were made and it follows that the stem has thick cuticle, stomata whose cells guard are below the epidermis line, hollow medulla, druses and tector trichomes as adaptations to climate and soil conditions in which the species is found and the leaf is dorsiventral and it has thick cuticle, tector trichomes and druses. The seed has great reserves of oil. These features favor the use of Moringa oleifera Lam. as a raw material to produce biodiesel in Brazil s Northeast semiarid region. Chemical analysis were made through oil solvent extraction using mechanic stirrer. The oil was analyzed in UV spectrophotometer. A transesterification was made and biodiesel was analyzed in gas chromatography. Oil yield was high and good quality biodiesel was obtained. To evaluate seeds coagulantion activity, coagulation and flocculation essays in jartest were made, using seed extract to treat raw water. Seeds were efficient in cogulation process to treat water. So, they can be used in rudimentary systems or as a raw material to coagulant proteins extraction, as an alternative to traditional coagulants. M. oleifera has characteristics that favor its use to biodiesel production and water treatment
Resumo:
Blooms negatively compromise the aquatic environment, plants, animals and human health.Some species are toxin-producing, such as the neurotoxin saxitoxin and the hepatotoxin microcystin, which may contaminate water reservoirs, as those existing in the semiarid region of Rio Grande do Norte (Brazil) which are used to supply the population, fishing, aquiculture and recreational activities, thereby providing the risk of human exposure through water intake, dermal contact and respiratory tract. Thus, it is recommended a constant monitoring of the density of cyanobacteria with the quantification of cyanotoxins. One goal with this work was the monitoring of water in four reservoirs in semiarid of RN through the identification and enumeration of cyanobacteria and through the identification and quantification of cyanotoxins by ELISA. Furthermore, we intended to assess the environmental perception of farmers and artisanal fishers in reservoirs of semiarid of RN through semi-structured interviews with questions mostly related to water and eutrophication. Through these objectives the aim was the development of management strategies for aquaculture and prevention of risks to public health. The results showed that the highest values of microcystins were found in the rainy season. Standards for drinking water, according to the guidelines of Ministry of Health 2914/2011 and CONAMA 357/05, setting the maximum values for raw water density of cyanobacteria: 50,000 cel.mL-1; microcystin: 1 μg. L-1 and saxitoxin: 3 μg. L-1. The values found for microcystin ranged between 0.00227 μg. L-1 and 24.1954 μg. L-1. From 128 samples analyzed, 27% were above the limit. There was no clear seasonal pattern for saxitoxins and their values ranged between 0.003 μg. L-1 and 0.766 μg. L-1 with none of the values above the limit. Furthermore, 76% of the densities of cyanobacteria values were above the limit. About environmental perception, 52 interviews were conducted and the results show that the respondents recognize the main uses of water of the rervoirs, recognize the importance and have a positive view about the reservoirs. They also realize that the water has a poor quality and can cause health problems. The results provide data showing the persistence of cyanobacteria and cyanotoxins, many times over the limit, reinforcing the importance of constant monitoring. The assessment of environmental perception gives foundation for later proposed environmental education linked to public health management into the context of this particular population, making it more effective
Resumo:
Northeastern Brazil is mainly formed by crystalline terrains (around 60% in area). Moreover, this region presents a semi-arid climate so that it is periodically subject to drought seasons. Furthermore, ground water quality extracted fromwells usually presents poor quality because of their high salinity contents. Nevertheless, ground water is still a very important source of water for human and animal consumption in this region. Well sitting in hard rocks terrains in Northeastern Brazil offers a mean success index of aboul 60%, given that a successful siting is defined by a well producing at least 0.5 m³/h. This low index reveals lack of knowledga about the true conditions of storage and percolation of ground water in crystalline rocks. Two models for structures storing and producing ground water in crystalline rocks in Northeastem Brazil have been proposed in the literature. The first model,tradnionally used for well sitting since the sixties are controlled by faults or fractures zones. This model is commonly referred, in Brazilian hydrogeological literature, as the "creek-crack" model (riacho-fenda in Portuguese). Sites appearing to present dense drainage network are preferred for water well siting - particularly at points where the drainages cross-cul each other. Field follow up work is usually based only on geological criteria. The second model is the "eluvio-alluvial through" (calha eluvio-aluvionar in Portuguese); it is also described in the literature but it is not yet incorporated in well sitting practice. This model is based on the hypothesis that reclilinear drainages can also be controlled by the folietion of the rock. Eventually, depending upon the degree of weathering, a through-shaped structure filled with sediments (alluvium and regolith) can be developed which can store and water can be produced from. Using severalfield case studies, this Thesis presents a thorough analysis ofthe two above cited models and proposes a new model. The analysis is based on an integrated methodological approach using geophysics and structural geology. Both land (Resitiviy and Ground Penetrating Radar- GPR) and aerogeophysical (magnetics and frequency domain eletromagnetics) surveys were used. Slructural analysis emphasized neolectonic aspects; in general, itwas found that fractures in the E-W direction are relatively open, as compared to fracturas inthe N-S direction, probably because E-W fractures were opened by the neotectonic stress regime in Northeastern Brazil, which is controlled by E-W compression and N-S extension. The riacho-fenda model is valid where drainages are controlled by fractures. The degree of fracturing and associated weathering dictale the hydrogeological potential of the structure. Field work in structural analogues reveals that subvertical fractures show consistent directions both in outcrop and aerophotograph scales. Geophysical surveys reveal subvertical conductive anomalies associated to the fracture network controlling the drainage; one of the borders of the conductive anomaly usually coincide wih the drainage. An aspect of particular importance to the validation of fracture control are the possible presence of relalively deep conductive anomalies wihoul continuation or propagalion to the surface. The conductive nature of lhe anomaly is due to the presence of wealhered rock and sedirnenls (alluvium and/or regolilh) storing ground waler which occur associated to the fracture network. Magnetic surveys are not very sensisnive to these structures.lf soil or covering sedirnents are resislive (> 100 Ohm.m), GPR can ba used to image precisely lhe fracture network. A major limialion of riacho-fenda model, revealed by GPR images, is associated to the fact thal subhorizontal fractures do play a very important role in connecting the fracture network, besides connect shallow recharge zones to relalively deep subvertical frecture zones. Iffractures play just a secondary control on the drainage, however, r/acho-fenda model may have a very limiled validny; in these cases, large portions oflhe drainage do nol coincide wilh frectures and mosl oflhewells localed in lhe drainage surrounding would resull dry. Usually, a secondary conlrol on lhe drainage by Ihefraclure networkcan be revealed only wilh detailed geophysical survey. The calha elClv1o-aluvlonarmodel is valid where drainages are conlrolled by folialion. The degree 01 wealhering 01 lhe lolialion planes dictales lhe hydrogeological polenlial 01 lhe slruclure. Outcrop analysis reveals Ihal lolialion and drainage direclions are parallel and Ihal no Iraclures, orfraclures wilh diflerent directions 01 lhe drainage direclion occur. Geophysical surveys reveal conduclive anomalies in a slab lorm associaled 10 lhe Ihrough 01 lhe wealhered rock and sedimenls (alluvium and/or regolith). Magnelic surveys can ofler a very good conlrol on lolialion direclion. An importanl aspect 10 validale lolialion conlrol are lhe presence 01 conductive anomalies showing shallow and deep portions area which are linked. Illhere is an exlensive soil cover, r/acho-fenda and calha eIClv1o-aluv/onar conlrols can be easily misinlerpreled in lhe absence 01 geophysical conlrol. Certainly, Ihis lacl could explain at leasl a part of lhe failure index in well sitting. The model wealhering sack (bolsllo de Intempertsmo in Portuguese) is proposed to explain cases where a very inlensive wealhering occur over lhe crystalline rock so Ihal a secondary inlerslilial porosity is crealed. The waler is Ihen stored in lhe porous of lhe regolilh in a similar mannerlo sedimentary rocks. A possible example ofthis model was delecled by using land geophysical survey where a relalivelyvery deep isolaled conduclive anomaly, in a slab form, was delected. Iflhis structure does store ground waler, certainly Ihere must be a link 01 lhe deep slructure wilh lhe surface in orderlo provide walerfeeding. This model mighl explain anomalous waler yields as greal as 50 m³/h Ihalsomelimescan occur in crystalline rocks in Northeaslern Brazil
Resumo:
Geological and geophysical studies (resistivity, self potential and VLF) were undertaken in the Tararaca and Santa Rita farms, respectively close to the Santo Antônio and Santa Cruz villages, eastern Rio Grande do Norte State, NE Brazil. Their aim was to characterize water acummulation structures in crystalline rocks. Based on geological and geophysical data, two models were characterized, the fracture-stream and the eluvio-alluvial through, in part already described in the literature. In the Tararaca Farm, a water well was located in a NW-trending streamlet; surrounding outcrops display fractures with the same orientation. Apparent resistivity sections, accross the stream channel, confirm fracturing at depth. The VLF profiles systematically display an alignment of equivalent current density anomalies, coinciding with the stream. Based on such data, the classical fracture-stream model seems to be well characterized at this place. In the Santa Rita Farm, a NE-trending stream display a metric-thick eluvioregolith-alluvial cover. The outcropping bedrock do not present fractures paralell to the stream direction, although the latter coincides with the trend of the gneiss foliation, which dips to the south. Geophysical data confirm the absence of a fracture zone at this place, but delineate the borders of a through-shaped structure filled with sediments (alluvium and regolith). The southern border of this structure dips steeper compared to the northern one. This water acummulation structure corresponds to an alternative model as regards to the classical fracture-stream, being named as the eluvio-alluvial trough. Its local controls are the drainage and relief, coupled with the bedrock weathering preferentially following foliation planes, generating the asymmetry of the through
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Em regiões tropicais e de temperaturas elevadas, Macrophomina phaseolina é agente de podridão em raízes, caule, ramos, e frutos em mais de 500 espécies de plantas cultivadas.Entretanto, pouco se sabe acerca da influência da temperatura e da umidade sobre a germinação dos microescleródios desse fungo. O objetivo deste trabalho foi estudar o efeito da interação temperatura-tensão de água na areia sobre a germinação dos microescleródios do fungo. Os trabalhos foram conduzidos em condições de laboratório, tendo sido realizados em duas etapas. em um primeiro experimento, avaliou-se a interação de cinco temperaturas com duas tensões de água. Os resultados obtidos subsidiaram um segundo experimento no qual avaliou-se a interação de duas temperaturas com seis tensões de água no substrato. O delineamento experimental para ambos experimentos foi o inteiramente casualizado com quatro repetições, em esquema fatorial, com arranjo combinatório 5x2 e 2x6, respectivamente, para o primeiro e segundo experimentos. Os resultados mostraram (P<=0,05) que os maiores percentuais de germinação ocorreram às temperaturas de 30 ºC e 33 ºC. Na tensão de água de -1.500 kPa ocorreu germinação em todas as temperaturas testadas. A tensão de água de -80 kPa tendeu a proporcionar o maior percentual de germinação, embora não tenha diferido das tensões de -8, -300 e -1.500 kPa. Os microescleródios não germinaram em areia seca ao ar, porém germinaram em 0 kPa, embora em menor percentual que a -8, - 80, -300 e -1.500 kPa. O efeito isolado da tensão de água sobre a germinação foi importante apenas quando se considerou os níveis extremos desse fator.
Resumo:
Extratos aquosos de sementes, parte aérea e raízes de três gramíneas e três leguminosas forrageiras foram preparados a uma concentração de 10%, com o objetivo de avaliar os efeitos potencialmente alelopáticos sobre a germinação de sementes e o alongamento da radícula das invasoras de pastagens: desmódio, guanxuma e assa-peixe. A germinação foi monitorada em períodos de dez dias, com contagens diárias e eliminação das sementes germinadas. O alongamento da radícula era medido ao final de um período de dez dias de crescimento. Os efeitos do potencial osmótico foram isolados através de cálculos. As espécies doadoras evidenciaram potencialidades alelopáticas que variou de intensidade em função da especificidade entre espécies doadoras e receptoras. B. brizantha e calopogônio foram as espécies que promoveram as reduções mais intensas sobre a germinação das sementes e o alongamento da radícula das espécies receptoras. A parte aérea das espécies doadoras constituiu-se na principal fonte de substâncias potencialmente alelopáticas, solúveis em água. Independentemente da espécie doadora, desmódio e guanxuma foram as invasoras que se mostraram mais susceptíveis aos efeitos potencialmente alelopáticos, enquanto o assapeixe foi a mais tolerante.
Resumo:
O intenso uso de herbicidas implica a necessidade de determinar o potencial dessas substâncias em contaminar fontes aquáticas subsuperficiais. Diante dessa preocupação, o objetivo deste trabalho foi avaliar o efeito de diferentes lâminas de água sobre o potencial de lixiviação de quatro herbicidas utilizados em pré-emergência na cultura do algodão, em dois solos provenientes de Campo Novo do Parecis-MT (RQ - textura arenosa) e Tangará da Serra-MT (LV - textura argilosa). No desenvolvimento deste trabalho utilizouse a técnica de bioensaio em colunas de solo, nas quais foram simuladas irrigações de 0, 20, 40, 60, 80 e 100 mm, após a aplicação de alachlor (RQ 2,40; LV 3,36 kg ha-1), oxyfluorfen (RQ 0,48; LV 0,72 kg ha-1), prometryne (RQ 0,75; LV 1,50 kg ha-1) e S-metolachlor (RQ 1,20; LV 1,44 kg ha-1). Nas amostras de solo com textura arenosa (RQ), evidenciou-se que lâminas de 80 e 100 mm de água proporcionaram lixiviação até a profundidade de 10-15 cm do alachlor e até 15-20 cm do S-metolachlor. Independentemente da lâmina de água aplicada, nas amostras de RQ oxyfluorfen não ultrapassou a camada de 5-10 cm, e o prometryne movimentou-se até a camada de 10-15 cm somente na lâmina de 100 mm de água. Nas amostras de solo com textura argilosa (LV), o oxyfluorfen não se movimentou além da camada superficial, mesmo sob as maiores lâminas de irrigação, e o prometryne atingiu 5-10 cm de profundidade sob lâminas de 80 e 100 mm. Os herbicidas alachlor e S-metolachlor atingiram 10-15 cm de profundidade sob lâminas de 80 e 100 mm no LV. Evidenciou-se uma maior movimentação efetiva das moléculas de herbicidas nas amostras de solo com textura arenosa (RQ), em relação às amostras de solo com textura argilosa (LV).
Resumo:
Na avaliação da qualidade de sementes pode ser necessária a hidratação das mesmas, como ocorre no teste de deterioração controlada que requer a uniformização do teor de água na amostra de sementes antes do processo de deterioração. Objetivou-se com o presente trabalho avaliar o potencial fisiológico de sementes de milho após a hidratação pelo método do substrato de papel toalha, sob diferentes temperaturas e quantidades de água no substrato, para elevar o teor de água para 15%, 20% e 25%. Foram avaliadas três quantidades de água no substrato (2,0; 2,5 e 3,0 vezes a massa do papel), sob temperaturas de 20 e 30°C. A qualidade inicial das sementes e após a hidratação foi determinada pelos seguintes testes: teor de água, massa de mil sementes, germinação, massa seca de plântulas, teste de frio, envelhecimento acelerado, condutividade elétrica, tetrazólio, porcentagem e velocidade de emergência das plântulas em campo. Os dados obtidos foram submetidos à análise de variância e as médias comparadas pelo teste de Tukey, a 5%, seguindo o delineamento inteiramente casualizado em esquema fatorial (3x2), independentemente para cada teor de água. A hidratação pelo método do substrato de papel toalha não afetou a germinação de sementes de milho, independentemente da temperatura e das proporções de água no substrato. As proporções de 2,0 e 2,5 vezes a massa do substrato papel toalha em água para a temperatura de 30°C e de 3,0 vezes a massa do substrato para a temperatura de 20°C não alteraram o potencial fisiológico das sementes, mostrando-se adequadas para hidratação de sementes de milho para teores de água de 15, 20 e 25%.
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)