Determining the location for a mobile device by utilization of local resources of the environment

The subject being analyzed of this Master’s Thesis is a development of a service that is used to define a current location of a mobile device. The service utilized data that is obtained from own GPS receiver in some possible cases and as well data from mobile devices which can be afforded for the current environment for acquisition of more precise position of the device. The computation environment is based on context of a mobile device. The service is implemented as an application for communicator series Nokia N8XX. The Master’s Thesis presents theoretical concept of the method and its practical implementation, architecture of the application, requirements and describes a process of its functionality. Also users’ work with application is presented and recommendations for possible future improvements are made.

Liikkuvan kenttätyön hallinta etätunnistusta ja paikannusta hyödyntävällä mobiilijärjestelmällä

Liikkuvan kenttätyön työntekijät suorittavat työpäivän aikana työtä useassa eri työkohteessa. Työkohteilla suoritettujen työtehtävien kirjaus tapahtuu usein jälkikäteen ja muistinvaraisesti. Diplomityön tavoitteena on esittää ratkaisu liikkuvan kenttätyön työkirjausten automatisointiin. Tavoitteen mukaisen etätunnistusta ja paikannusta hyödyntävän mobiilijärjestelmän avulla työntekijöiden käsinkirjoitetut ja mahdollisesti puutteelliset työkirjaukset korvataan automaattisilla ja täsmällisillä kirjauksilla. Järjestelmän tavoitteena on vähentää työntekijöiden työkuormaa. Työssä arvioidaan etätunnistuksen hyödyntämistä mobiilisovelluksen käyttöä helpottavana tekniikkana. Parhaimmillaan etätunnistus poistaa kokonaan mobiililaitteen näppäilytarpeen, mutta aiheuttaa osaltaan lisää työtä järjestelmän ylläpitoon. Työn tuloksissa esitetään myös satelliittipaikannuksen todettu tarkkuus ja soveltuvuus liikkuvan kenttätyön tarpeisiin taajama- ja kaupunkialueella. Varsinkin kaupunkialueella satelliittiperustaisen paikkatiedon tehokas hyödyntäminen edellyttää suodatusta ja älykkyyttä paikkatiedon prosessointiin.

Geoambientes do Parque Estadual do Ibitipoca, município de Lima Duarte-MG

Foram identificados, mapeados e caracterizados os geoambientes do Parque Estadual do Ibitipoca (PEI), Minas Gerais, com o objetivo de subsidiar o manejo ecológico da área. Para este fim, realizaram-se coletas de solos, em pontos georreferenciados por GPS (Global Positioning System), fotointerpretações a partir de ortofotos e uso de mapas planialtimétricos, além de intenso reconhecimento de solos no campo. Oito geoambientes foram identificados e caracterizados: (1) Patamares com Espodossolos, 2) Cristas Ravinadas, 3) Escarpas, 4) Grotas, 5) Mata Baixa com Candeia, 6) Mata Alta sobre Xisto, 7) Topos Aplainados e 8) Rampas com Vegetação Aberta. Em cada ambiente a vegetação associada é fortemente condicionada pela profundidade do solo e pelo tempo de permanência de água no sistema. Os ambientes de mata, tanto sobre xistos quanto sobre quartzitos, sofrem menor estresse hídrico, seja por melhores condições físicas do solo e maior retenção de água, seja pela presença de ambiente mais ombrófilo e úmido, como nas Grotas. Os geoambientes florestados possuem concentrações de P e K mais elevadas do que nos ambientes campestres abertos. No geoambiente de Mata Baixa com Candeia, a pobreza química do substrato parece ser o impedimento à ocorrência de uma floresta mais densa. Os Campos de Altitude ocorrem nas altitudes mais elevadas no PEI, sendo desenvolvidos sobre solos mais profundos do que sob campos rupestres, onde há freqüente exposição da rocha ou solos muito rasos.

Metodologia para avaliação do desempenho de receptor de GPS de uso agrícola em condição cinemática

São inúmeras as aplicações das tecnologias de Global Navigation Satellite System (GNSS), e o sistema mais utilizado é o Global Positioning System (GPS), desenvolvido pelos Estados Unidos. Em aplicações agrícolas, há a necessidade de posicionamento estático e cinemático, com demandas de distintos níveis de acurácia. No entanto, os usuários carecem de informação quanto ao desempenho cinemático de receptores GNSS, sendo disponibilizados apenas dados de desempenho estático, e por essa razão desenvolveu-se um veículo instrumentado para testar metodologia de avaliação do desempenho de receptores GNSS sob condição cinemática, visando a representar operações agrícolas. Foi utilizada instrumentação para coletar os dados sob variação de velocidade e sentido de percurso circular. A partir de ensaio experimental, verificou-se que a metodologia possibilita o cálculo da acurácia e da precisão, necessitando apenas de melhorias nos equipamentos de aquisição de dados em ensaios de longa duração.

Análise de detecção de cluster na caracterização espaço-temporal da tuberculose bovina no estado da Bahia

A tuberculose bovina (BTB) é uma enfermidade causada pela infecção pelo Mycobacterium bovis que acomete o homem e diversas espécies de mamíferos. A BTB tem grande importância por causar prejuízos econômicos nas regiões infectadas e por seu impacto na saúde pública. Foi realizado inquérito epidemiológico no Estado da Bahia, entre 2008 e 2010, com o objetivo de estimar a prevalência e conhecer a distribuição espaço temporal da enfermidade. O Estado foi estratificado em quatro regiões, cada uma com características epidemiológicas e demográficas homogêneas representativas de formas de produção pecuária. Um total de 18.810 cabeças com idade superior a 2 anos foi amostrado em 1350 propriedades. O teste cervical comparativo foi aplicado em cada animal selecionado, sendo considerados positivos os animais reagentes positivos ou duas vezes inconclusivos. Latitude e Longitude foram tomadas para cada propriedade amostrada com o auxilio do aparelho de Global Positioning System (GPS). O teste de Cuzick-and-Edwards e a análise de rastreio espacial (spatial scan statistic) foram utilizados para identificar qualquer agrupamento espacial de BTB. A prevalência de rebanho na Bahia, indicando a proporção de propriedades foco, foi de 1,6% (IC 95%: 1,0% - 2,69% por região). Nenhuma evidência significativa (P<0.05) de aglomeração espacial ou clustering foi detectada, possivelmente devido à baixa prevalência da doença. Estes resultados sugerem que a BTB tem baixa prevalência no estado da Bahia e que, nestas condições epidemiológicas, os focos encontrados não podem ser explicados por fatores espacialmente estruturados.

Kenttätykistön erikoisampumatarvikkeiden käyttö suomalaisissa olosuhteissa

Nykypäivän taistelukentällä käytettävä taisteluvälinemateriaalin on oltava kustannustehokasta. Entistä pienempien joukkojen on taisteltava laajalla alueella ja valmistauduttava vaikuttamaan viholliseen myös syvyydessä. Materiaali ja kalusto erikoistuvat saavuttaakseen mahdollisimman suurta tehoa ja tuhoa tietyissä maaleissa. Tykistön tehtävinä ovat edelleen vastatykistötoiminta, torjuntatuli sekä joukkojen lähituki. Tykistöjärjestelmien merkitys kokonaistulivoiman aikaansaamisessa pysyy ennallaan muun muassa sen monipuolisen käytettävyyden, tehokkuuden ja nopean reagointikyvyn ansiosta. Tykistöasejärjestelmillä halutaan vaikuttaa yhä syvemmälle vihollisen ryhmitykseen. Kasvaneen ampumaetäisyyden johdosta on tarvetta varustaa ampumatarvikkeet ohjausominaisuuksilla. Vihollinen on suojautunut kevyesti panssaroituihin ajoneuvoihin tai liikkuu jalan. Tutkimuksen tarkoitus on esitellä eri erikoisampumatarvikkeiden käyttötehokkuutta tiettyjä maaleja vastaan tietyissä suomalaisissa olosuhteissa. Erikoisampumatarvikkeina käsitellään kenttätykistön erikoisampumatarvikkeita. Erikoisampumatarvikkeisiin luetaan valaisu-, savutus- ja kuorma-ammukset sekä ohjautuvat ja ohjattavat ammukset. Tutkimuksessa ei käsitellä raketinheittimistön tai kranaatinheittimistön ampumatarvikkeita eikä NBC (Nuclear Biological Chemical)-ampumatarvikkeita. Tutkimuksesta on jätetty pois ampumatarvikkeet, joilla on mittausominaisuuksia tai ovat muotoilunsa ansiosta suunniteltu saavuttamaan pidempiä ampumaetäisyyksiä. GPS-ohjautuvia ampumatarvikkeita käsiteltäessä tarkastellaan vain yhdysvaltalaista Global Positioning System:iin tukeutuvaa järjestelmää. Eurooppalaista GALILEO Positioning System:iä ja venäläistä Global Navigation System:iä (GLONASS) ei ole tarkasteltu. Nykyajan ampumatarviketeollisuudessa yleisimpänä kenttätykistön kaliiperina on 155 millimetrin ampumatarvikkeet. Tälle kaliiperille löytyy suurin valikoima erilaisia ampumatarvikkeita. Tutkimuksessa on siksi tarkasteltu vain tälle kaliiperille valmistettuja ampumatarvikkeita. Maalilla tarkoitetaan tutkimuksessa esitettyjä yleispäteviä kenttätykistön maaleja. Tutkimusmenetelmänä on kartoittava ja kuvaileva asiakirjatutkimus. Tiedot on analysoitu ja johtopäätökset tehty lähinnä teknisestä näkökulmasta. Kaikki tutkimuksessa käytetyt lähteet on verrattu ainakin yhteen muuhun lähteeseen, mahdollisimman suuren totuudenmukaisuuden saavuttamiseksi. Tutkija on pyrkinyt vähentämään lähteiden määrää ja täten käyttämään mahdollisimman laadukkaita lähteitä. Tutkimuksen pääkysymykset ovat: Mitkä kenttätykistön erikoisampumatarvikkeet ovat käytännöllisimmät mitäkin maalia kohti? Miten suomalaiset olosuhteet vaikuttavat mihinkin erikoisampumatarvikkeeseen? Saavuttaakseen pääkysymyksiin vastauksen on tutkija käsitellyt seuraavia alakysymyksiä: Millä tavalla erikoisampumatarvikkeet toimivat? Mihin tarkoitukseen ne ovat suunniteltuja? Mihin maaliin on mikäkin erikoisampumatarvike suunniteltu?

A Test Bed Applied Mobile Robot Navigation

It is presented a test bed applied to studies on dynamics, control, and navigation of mobile robots. A cargo ship scale model was chosen, which can be radio-controlled or operated autonomously through an embedded control system. A control program, which manages on board mission execution, is implemented on a microcontroller. Navigation is based on an electronic compass, which includes automatic compensation for pitch and roll motions. Heading control loop is based on this sensor, and on a rudder positioning system. A propulsion control system is also implemented. Typical manoeuvres as the turning test and "zig-zag", were implemented and tested. They are included on a manoeuvre library, and can be accessed independently or in combined modes. The embedded system is also in charge of signal acquisition and storing during the missions. It is possible to analyse experiments on identification of ship dynamics, control, and navigation, through the data transferred to a PC by serial communication. Navigation is going to be improved by including inertial sensors on board, and a DGPS. Preliminary tests are aimed to ship identification, and manoeuvrability, using free model tests. Future steps include extending this system for developing other mobile robots as, ROVs, AUVs, and aerial vehicles.

Floristic and structural variation of weeds in eucalyptus plantations as influenced by relief and time of year

The objective of this work was to analyze the floristic variation and phytosociological structure of weeds as influenced by relief and time of year in eucalyptus plantations in Santana do Paraíso and Guanhães - MG. The total area sampled for each locality was approximately 10 ± 3 hectares, comprising three types of relief: lowland, slope, and upper area. In each type of relief, 10 plots of 1 m² were sampled, corresponding to 30 plots per locality, where they were randomly allocated in a zigzag. The taxonomic identification was performed in four assessments, corresponding to the months of November and March, comprising two ratings each season, always at the same points, and geo-referenced using the Global Positioning System (GPS). A total of 3,893 individuals, 18 families and 61 species, were identified in Santana do Paraiso and a total of 1,166 individuals, 13 families and 58 species, in Guanhães. In both localities, the most representative families in terms of wealth were: Poaceae, Asteraceae, and Fabaceae. Galinsoga parviflora was the most abundant species. The Vernonia polyantes was identified only in the lowlands, while Arrabida florida was identified in the slope and upper area. On the other hand, Emilia coccinea, Sida rhombifolia, S. paniculatum and Spermacoce latifolia were common to all three environments. Commelina benghalensis was present only in the month of March, while G. parviflora was present only in the month of November. It was concluded that the floristic and phytosociological variation of weeds in eucalyptus plantations is influenced by the type of relief and time of year, which should guide the management practices used in the culture.

Using GPS, GIS & remote sensing to understand Niagara Terroir : Pinot noir in the Four Mile Creek & St. David's Bench sub-appellations

The relationships between vine water status, soil texture, and vine size were observed in four Niagara, Ontario Pinot noir vineyards in 2008 and 2009. The vineyards were divided into water status zones using geographic information systems (GIS) software to map the seasonal mean midday leaf water potential (,P), and dormant pruning shoot weights following the 2008 season. Fruit was harvested from all sentinel vines, bulked by water status zones and made into wine. Sensory analysis included a multidimensional sorting (MDS) task and descriptive analysis (DA) of the 2008 wines. Airborne multispectral images, with a spatial resolution of 38 cm, were captured four times in 2008 and three times in 2009, with the final flights around veraison. A semi-automatic process was developed to extract NDVI from the images, and a masking procedure was identified to create a vine-only NDVI image. 2008 and 2009 were cooler and wetter than mean years, and the range of water status zones was narrow. Yield per vine, vine size, anthocyanins and phenols were the least consistent variables. Divided by water status or vine size, there were no variables with differences between zones in all four vineyards in either year. Wines were not different between water status zones in any chemical analysis, and HPLC revealed that there were no differences in individual anthocyanins or phenolic compounds between water status zones within the vineyard sites. There were some notable correlations between vineyard and grape composition variables, and spatial trends were observed to be qualitatively related for many of the variables. The MDS task revealed that wines from each vineyard were more affected by random fermentation effects than water status effects. This was confirmed by the DA; there were no differences between wines from the water status zones within vineyard sites for any attribute. Remotely sensed NDVI (normalized difference vegetation index) correlated reasonably well with a number of grape composition variables, as well as soil type. Resampling to a lower spatial resolution did not appreciably affect the strength of correlations, and corresponded to the information contained in the masked images, while maintaining the range of values of NDVI. This study showed that in cool climates, there is the potential for using precision viticulture techniques to understand the variability in vineyards, but the variable weather presents a challenge for understanding the driving forces of that variability.

Using GPS, GIS & remote sensing to understand Niagara Terroir

The focus of this study was to detennine whether soil texture and composition variables were related to vine water status and both yield components and grape composition, and whether multispectral high definition airborne imagery could be used to segregate zones in vineyards to target fruit of highest quality for premium winemaking. The study took place on a 10-ha commercial Riesling vineyard at Thirty Bench Winemakers, in Beamsville (Ontario). Results showed that Soil moisture and leaf'l' were temporally stable and related to berry composition and remotely-sensed data. Remote-sensing, through the calculation of vegetation indices, was particularly useful to predict vine vigor, yield, fruit maturity as well as berry monoterpene concentration; it could also clearly assist in making wines that are more representative ofthe cultivar used, and also wines that are a reflection of a specific terroir, since calculated vegetation indices were highly correlated to typical Riesling.

Propagation of Microwaves in the Troposphere with Potential Application to GPS based Navigation and Meteorology with emphasis on Indian region

Global Positioning System (GPS), with its high integrity, continuous availability and reliability, revolutionized the navigation system based on radio ranging. With four or more GPS satellites in view, a GPS receiver can find its location anywhere over the globe with accuracy of few meters. High accuracy - within centimeters, or even millimeters is achievable by correcting the GPS signal with external augmentation system. The use of satellite for critical application like navigation has become a reality through the development of these augmentation systems (like W AAS, SDCM, and EGNOS, etc.) with a primary objective of providing essential integrity information needed for navigation service in their respective regions. Apart from these, many countries have initiated developing space-based regional augmentation systems like GAGAN and IRNSS of India, MSAS and QZSS of Japan, COMPASS of China, etc. In future, these regional systems will operate simultaneously and emerge as a Global Navigation Satellite System or GNSS to support a broad range of activities in the global navigation sector.Among different types of error sources in the GPS precise positioning, the propagation delay due to the atmospheric refraction is a limiting factor on the achievable accuracy using this system. The WADGPS, aimed for accurate positioning over a large area though broadcasts different errors involved in GPS ranging including ionosphere and troposphere errors, due to the large temporal and spatial variations in different atmospheric parameters especially in lower atmosphere (troposphere), the use of these broadcasted tropospheric corrections are not sufficiently accurate. This necessitated the estimation of tropospheric error based on realistic values of tropospheric refractivity. Presently available methodologies for the estimation of tropospheric delay are mostly based on the atmospheric data and GPS measurements from the mid-latitude regions, where the atmospheric conditions are significantly different from that over the tropics. No such attempts were made over the tropics. In a practical approach when the measured atmospheric parameters are not available analytical models evolved using data from mid-latitudes for this purpose alone can be used. The major drawback of these existing models is that it neglects the seasonal variation of the atmospheric parameters at stations near the equator. At tropics the model underestimates the delay in quite a few occasions. In this context, the present study is afirst and major step towards the development of models for tropospheric delay over the Indian region which is a prime requisite for future space based navigation program (GAGAN and IRNSS). Apart from the models based on the measured surface parameters, a region specific model which does not require any measured atmospheric parameter as input, but depends on latitude and day of the year was developed for the tropical region with emphasis on Indian sector.Large variability of atmospheric water vapor content in short spatial and/or temporal scales makes its measurement rather involved and expensive. A local network of GPS receivers is an effective tool for water vapor remote sensing over the land. This recently developed technique proves to be an effective tool for measuring PW. The potential of using GPS to estimate water vapor in the atmosphere at all-weather condition and with high temporal resolution is attempted. This will be useful for retrieving columnar water vapor from ground based GPS data. A good network of GPS could be a major source of water vapor information for Numerical Weather Prediction models and could act as surrogate to the data gap in microwave remote sensing for water vapor over land.

Constraining the active tectonic deformation of Andaman-Nicobar Arc in the background of December 26,2004 Great Sumatra-Andaman Earthquake

The Andaman-Nicobar Islands in the Bay of Bengal lies in a zone where the Indian plate subducts beneath the Burmese microplate, and therefore forms a belt of frequent earthquakes. Few efforts, not withstanding the available historical and instrumental data were not effectively used before the Mw 9.3 Sumatra-Andaman earthquake to draw any inference on the spatial and temporal distribution of large subduction zone earthquakes in this region. An attempt to constrain the active crustal deformation of the Andaman-Nicobar arc in the background of the December 26, 2004 Great Sumatra-Andaman megathrust earthquake is made here, thereby presenting a unique data set representing the pre-seismic convergence and co-seismic displacement.Understanding the mechanisms of the subduction zone earthquakes is both challenging sCientifically and important for assessing the related earthquake hazards. In many subduction zones, thrust earthquakes may have characteristic patterns in space and time. However, the mechanism of mega events still remains largely unresolved.Large subduction zone earthquakes are usually associated with high amplitude co-seismic deformation above the plate boundary megathrust and the elastic relaxation of the fore-arc. These are expressed as vertical changes in land level with the up-dip part of the rupture surface uplifted and the areas above the down-dip edge subsided. One of the most characteristic pattern associated with the inter-seismic era is that the deformation is in an opposite sense that of co-seismic period.This work was started in 2002 to understand the tectonic deformation along the Andaman-Nicobar arc using seismological, geological and geodetic data. The occurrence of the 2004 megathrust earthquake gave a new dimension to this study, by providing an opportunity to examine the co-seismic deformation associated with the greatest earthquake to have occurred since the advent of Global Positioning System (GPS) and broadband seismometry. The major objectives of this study are to assess the pre-seismic stress regimes, to determine the pre-seismic convergence rate, to analyze and interpret the pattern of co-seismic displacement and slip on various segments and to look out for any possible recurrence interval for megathrust event occurrence for Andaman-Nicobar subduction zone. This thesis is arranged in six chapters with further subdivisions dealing all the above aspects.

Precision mapping

The nondestructive determination of plant total dry matter (TDM) in the field is greatly preferable to the harvest of entire plots in areas such as the Sahel where small differences in soil properties may cause large differences in crop growth within short distances. Existing equipment to nondestructively determine TDM is either expensive or unreliable. Therefore, two radiometers for measuring reflected red and near-infrared light were designed, mounted on a single wheeled hand cart and attached to a differential Global Positioning System (GPS) to measure georeferenced variations in normalized difference vegetation index (NDVI) in pearl millet fields [Pennisetum glaucum (L.) R. Br.]. The NDVI measurements were then used to determine the distribution of crop TDM. The two versions of the radiometer could (i) send single NDVI measurements to the GPS data logger at distance intervals of 0.03 to 8.53 m set by the user, and (ii) collect NDVI values averaged across 0.5, 1, or 2 m. The average correlation between TDM of pearl millet plants in planting hills and their NDVI values was high (r^2 = 0.850) but varied slightly depending on solar irradiance when the instrument was calibrated. There also was a good correlation between NDVI, fractional vegetation cover derived from aerial photographs and millet TDM at harvest. Both versions of the rugged instrument appear to provide a rapid and reliable way of mapping plant growth at the field scale with a high spatial resolution and should therefore be widely tested with different crops and soil types.

Context as a Service

In the vision of Mark Weiser on ubiquitous computing, computers are disappearing from the focus of the users and are seamlessly interacting with other computers and users in order to provide information and services. This shift of computers away from direct computer interaction requires another way of applications to interact without bothering the user. Context is the information which can be used to characterize the situation of persons, locations, or other objects relevant for the applications. Context-aware applications are capable of monitoring and exploiting knowledge about external operating conditions. These applications can adapt their behaviour based on the retrieved information and thus to replace (at least a certain amount) the missing user interactions. Context awareness can be assumed to be an important ingredient for applications in ubiquitous computing environments. However, context management in ubiquitous computing environments must reflect the specific characteristics of these environments, for example distribution, mobility, resource-constrained devices, and heterogeneity of context sources. Modern mobile devices are equipped with fast processors, sufficient memory, and with several sensors, like Global Positioning System (GPS) sensor, light sensor, or accelerometer. Since many applications in ubiquitous computing environments can exploit context information for enhancing their service to the user, these devices are highly useful for context-aware applications in ubiquitous computing environments. Additionally, context reasoners and external context providers can be incorporated. It is possible that several context sensors, reasoners and context providers offer the same type of information. However, the information providers can differ in quality levels (e.g. accuracy), representations (e.g. position represented in coordinates and as an address) of the offered information, and costs (like battery consumption) for providing the information. In order to simplify the development of context-aware applications, the developers should be able to transparently access context information without bothering with underlying context accessing techniques and distribution aspects. They should rather be able to express which kind of information they require, which quality criteria this information should fulfil, and how much the provision of this information should cost (not only monetary cost but also energy or performance usage). For this purpose, application developers as well as developers of context providers need a common language and vocabulary to specify which information they require respectively they provide. These descriptions respectively criteria have to be matched. For a matching of these descriptions, it is likely that a transformation of the provided information is needed to fulfil the criteria of the context-aware application. As it is possible that more than one provider fulfils the criteria, a selection process is required. In this process the system has to trade off the provided quality of context and required costs of the context provider against the quality of context requested by the context consumer. This selection allows to turn on context sources only if required. Explicitly selecting context services and thereby dynamically activating and deactivating the local context provider has the advantage that also the resource consumption is reduced as especially unused context sensors are deactivated. One promising solution is a middleware providing appropriate support in consideration of the principles of service-oriented computing like loose coupling, abstraction, reusability, or discoverability of context providers. This allows us to abstract context sensors, context reasoners and also external context providers as context services. In this thesis we present our solution consisting of a context model and ontology, a context offer and query language, a comprehensive matching and mediation process and a selection service. Especially the matching and mediation process and the selection service differ from the existing works. The matching and mediation process allows an autonomous establishment of mediation processes in order to transfer information from an offered representation into a requested representation. In difference to other approaches, the selection service selects not only a service for a service request, it rather selects a set of services in order to fulfil all requests which also facilitates the sharing of services. The approach is extensively reviewed regarding the different requirements and a set of demonstrators shows its usability in real-world scenarios.

d-Ruta, un sistema móvil de información turística

d-Ruta is a new location based service designed for the visualization, planning, follow-up, interaction, maintenance and distribution of information about tourist routes and their associated points of interest, in the Vall de Ribes, in the Catalan Pyrenees. (...)