Effect of organic additives on the cycling performances of lithium metal polymer cells

Gel polymer electrolytes were prepared by immersing a porous poly(vinylidene fluoride-co-hexafluoropropylene) membrane in an electrolyte solution containing small amounts of organic additive. Three kinds of organic compounds, thiophene, 3,4-ethylenedioxythiophene and biphenyl, were used as a polymerizable monomeric additive. The organic additives were found to be electrochemically oxidized to form conductive polymer films on the electrode at high potential. By using the gel polymer electrolytes containing different organic additive, lithium metal polymer cells, composed of lithium anode and LiCoO2 cathode, were assembled and their cycling performance evaluated. Adding small amounts of a suitable polymerizable additive to the gel polymer electrolyte was found to reduce the interfacial resistance in the cell during cycling, and it thus exhibited less capacity fade and better high rate performance. Differential scanning calorimetric studies showed that the thermal stability of the fully charged LiCoO2 cathode was improved in the cell containing an organic additive.

Teaching and live performances : applied theatre in universities and schools

This article compares the classroom process of school teachers and university lecturers to the activity of theatrical performance. In doing so, it probes the potential of live performance as an educational instrument. It concludes by tracing some of the history of applications of theatre to education, from the time of Brecht to the present day.

Needleless electrospinning : developments and performances

Electrospinning technique has attracted a lot of interests recently, although it was invented in as early as 1934 by Anton (Anton, 1934). A basic electrospinning setup normally comprises a high voltage power supply, a syringe needle connected to power supply, and a counter-electrode collector as shown in Fig. 1. During electrospinning, a high electric voltage is applied to the polymer solution, which highly electrifies the solution droplet at the needle tip (Li & Xia, 2004). As a result, the solution droplet at the needle tip receives electric forces, drawing itself toward the opposite electrode, thus deforming into a conical shape (also known as “Taylor cone” (Taylor, 1969)). When the electric force overcomes the surface tension of the polymer solution, the polymer solution ejects off the tip of the “Taylor cone” to form a polymer jet. The charged jet is stretched by the strong electric force into a fine filament. Randomly deposited dry fibers can be obtained on the collector due to the evaporation of solvent in the filament. There are many factors affecting the electrospinning process and fiber properties, including polymer materials (e.g. polymer structure, molecular weight, solubility), solvent (e.g. boiling point, dielectric properties), solution properties (e.g. viscosity, concentration, conductivity, surface tension), operating conditions (e.g. applied voltage, collecting distance, flow rate), and ambient environment (e.g. temperature, gas environment, humidity).

Gram-scale and template-free synthesis of ultralong tin disulfide nanobelts and their lithium ion storage performances

Ultralong SnS2 nanobelts with a high production yield up to _98% were synthesized via a gram-scale and template-free solvothermal route. The synthetic mechanism of these intriguing ultralong nanobelts was proposed to be from the synergetic effect of the layered CdI2-type structure of SnS2 and surfacemodification of the capping reagent dodecanethiol. The resulting SnS2 nanobelts showed a high specific capacity of 640 mA h g_1 and stable cycling ability (560 mA h g_1 after 50 cycles), which is much better than a graphite anode.

Modelling and analysing track cycling Omnium performances using statistical and machine learning techniques

This article describes the utilisation of an unsupervised machine learning technique and statistical approaches (e.g., the Kolmogorov-Smirnov test) that assist cycling experts in the crucial decision-making processes for athlete selection, training, and strategic planning in the track cycling Omnium. The Omnium is a multi-event competition that will be included in the summer Olympic Games for the first time in 2012. Presently, selectors and cycling coaches make decisions based on experience and intuition. They rarely have access to objective data. We analysed both the old five-event (first raced internationally in 2007) and new six-event (first raced internationally in 2011) Omniums and found that the addition of the elimination race component to the Omnium has, contrary to expectations, not favoured track endurance riders. We analysed the Omnium data and also determined the inter-relationships between different individual events as well as between those events and the final standings of riders. In further analysis, we found that there is no maximum ranking (poorest performance) in each individual event that riders can afford whilst still winning a medal. We also found the required times for riders to finish the timed components that are necessary for medal winning. The results of this study consider the scoring system of the Omnium and inform decision-making toward successful participation in future major Omnium competitions.

Analyzing track sprint cyclists' performances using position-specific maximal-torque and power-cadence relationships

Previous studies have demonstrated the importance of maximal Torque-Cadence (T-C) and Power-Cadence (P-C) relationships, for the performances of world class track sprint cyclists. If these relationships are affected by the function of the lower limb muscles, the ability of cyclists to generate torque and power at a given cadence may vary depending on their riding position. During sprint events (individual and team sprints and Keirin), cyclists alternate between standing and seated positions. The T-C and P-C relationships may change with the position adopted by the cyclists. PURPOSE: The aim of this study was to evaluate the necessity to define position specific maximal T-C and P-C relationships. METHODS: Eight junior elite track cyclists from the National Talent Identification squad undertook two inertial-load tests that consisted of four all-out sprints each. One test was undertaken at the velodrome in a standing position on a carbon fibre track bike, and the other test was completed in a seated position on an air-braked stationary ergometer. A calibrated SRM power meter interfaced to a custom instrumentation package was used for all mechanical measurements. Maximal T-C and P-C relationships were analysed to calculate maximal Torque (T0), maximal Power (Pmax) and optimal pedalling cadence (PCopt). RESULTS: All individual T-C and P-C relationships obtained for both body positions were fitted by linear regressions (r2=0.95 ± 0.02) and second order polynomials (r2=0.96 ± 0.01), respectively. T0 was higher (209 ± 2.2N.m vs. 177.0 ± 3.9N.m, p<0.05), PCopt was lower (112.5 ± 11.4rpm vs. 120.1 ± 6.7rpm, p<0.05), and Pmax was higher (1261 ± 235W vs. 1076 ± 183W, p<0.05) in standing position compared to seated position. CONCLUSION: Analysis of track sprint cyclists’ performances can be improved by the determination of position-specific maximal T-C and P-C relationships .

Building movements: directed improvisation performances : conversing with buildings; assisted falling

For these performances, the new Design Hub building will play the role of architectural surrounds used as spatial research devices, architectural agent and collaborator – by giving the building our attention we aim to bring it and its affordances explicitly into the collective body. In exploring the set of interlinked spaces in the Hub (with an emphasis, we propose, on the stairs) as “elaborately structured pretexts for action” , we anticipate that the beginnings of an approach may emerge and allow us to understand that when a person “flexes her muscles, a person [also] flexes her surroundings”. Arakawa and Gins offer ways to assist us in approaching architecture as a tentative constructing toward a holding in place – in which all modes of sensing and scales of action are exercised – through their notions of ‘architectural surround’ and ‘architectural body’ garnered from chapters ‘Notes for an Architectural Body’ and ‘Architectural Surround’ (Gins and Arakawa, 2002).

Performances of rainfall-runoff models calibrated over single and continuous storm flow events

Accurate parameter estimation is important for reliable rainfall-runoff modeling. Previous studies emphasize that a sufficient length of continuous events is required for model calibration to overcome the effect of initial conditions. This paper investigates the feasibility of calibrating rainfall-runoff models over a number of limited storm flow events. For a subcatchment having a moderate influence from initial soil moisture conditions, this study shows that rainfall-runoff models could still be calibrated reliably over a set of representative events provided that the events cover a wide range of peak flow, total runoff volume, and initial soil moisture conditions. This approach could provide an alternative calibration strategy for a small watershed that has a limited data length but consists of runoff events with a wide range of magnitudes. Compared to continuous-event calibration, event-based calibration appears to perform better in simulating the overall shape of hydrograph, peak flow and time to peak. However, continuous-event calibration was found to be more reliable in providing runoff volume, suggesting that continuous-event calibration should still be used when runoff volume is the main concern of a study.

Short-term impacts of the cricket match performances on national share markets – a case study of India and Australia

We investigate the impact that investor sentiment can have on stock market following performances by the national cricket teams of India and Australia in one-day cricket matches from 1990 to 2011. Motivated by previous findings of cricket’s impacts on stock markets, this study expands on previous research by investigating whether performances of individuals within the teams can also have an impact on their respective leading stock indices. Using an event study, we find no evidence of player or team performances significantly impacting the stock or futures markets. However, we find evidence of a ‘mood effect’ of poor performance by key players of national cricket teams in terms of significant drop in trading volumes in the following day. Our research poses and statistically examines some interesting questions and opens up the field for further research on this intriguing topic of sporting event impacts on national economies.

Algae in fish feed: performances and fatty acid metabolism in juvenile Atlantic Salmon

Algae are at the base of the aquatic food chain, producing the food resources that fish are adapted to consume. Previous studies have proven that the inclusion of small amounts (<10% of the diet) of algae in fish feed (aquafeed) resulted in positive effects in growth performance and feed utilisation efficiency. Marine algae have also been shown to possess functional activities, helping in the mediation of lipid metabolism, and therefore are increasingly studied in human and animal nutrition. The aim of this study was to assess the potentials of two commercially available algae derived products (dry algae meal), Verdemin (derived from Ulva ohnoi) and Rosamin (derived from diatom Entomoneis spp.) for their possible inclusion into diet of Atlantic Salmon (Salmo salar). Fish performances, feed efficiency, lipid metabolism and final product quality were assessed to investigated the potential of the two algae products (in isolation at two inclusion levels, 2.5% and 5%, or in combination), in experimental diets specifically formulated with low fish meal and fish oil content. The results indicate that inclusion of algae product Verdemin and Rosamin at level of 2.5 and 5.0% did not cause any major positive, nor negative, effect in Atlantic Salmon growth and feed efficiency. An increase in the omega-3 long-chain polyunsaturated fatty acid (n-3 LC-PUFA) content in whole body of fish fed 5% Rosamin was observed.