880 resultados para out-put systems of government and governance
Resumo:
Cost-sharing, which involves government-farmer partnership in the funding of agricultural extension service, is one of the reforms aimed at achieving sustainable funding for extension systems. This study examined the perceptions of farmers and extension professionals on this reform agenda in Nigeria. The study was carried out in six geopolitical zones of Nigeria. A multi-stage random sampling technique was applied in the selection of respondents. A sample size of 268 farmers and 272 Agricultural Development Programme (ADP) extension professionals participated in the study. Both descriptive and inferential statistics were used in analysing the data generated from this research. The results show that majority of farmers (80.6%) and extension professionals (85.7%) had favourable perceptions towards cost-sharing. Furthermore, the overall difference in their perceptions was not significant (t =0.03). The study concludes that the strong favourable perception held by the respondents is a pointer towards acceptance of the reform. It therefore recommends that government, extension administrators and policymakers should design and formulate effective strategies and regulations for the introduction and use of cost-sharing as an alternative approach to financing agricultural technology transfer in Nigeria.
Resumo:
The shamba system involves farmers tending tree saplings on state-owned forest land in return for being permitted to intercrop perennial food crops until canopy closure. At one time the system was used throughout all state-owned forest lands in Kenya, accounting for a large proportion of some 160,000 ha. The system should theoretically be mutually beneficial to both local people and the government. However the system has had a chequered past in Kenya due to widespread malpractice and associated environmental degradation. It was last banned in 2003 but in early 2008 field trials were initiated for its reintroduction. This study aimed to: assess the benefits and limitations of the shamba system in Kenya; assess the main influences on the extent to which the limitations and benefits are realised and; consider the management and policy requirements for the system's successful and sustainable operation. Information was obtained from 133 questionnaires using mainly open ended questions and six participatory workshops carried out in forest-adjacent communities on the western slopes of Mount Kenya in Nyeri district. In addition interviews were conducted with key informants from communities and organisations. There was strong desire amongst local people for the system's reintroduction given that it had provided significant food, income and employment. Local perceptions of the failings of the system included firstly mismanagement by government or forest authorities and secondly abuse of the system by shamba farmers and outsiders. Improvements local people considered necessary for the shamba system to work included more accountability and transparency in administration and better rules with respect to plot allocation and stewardship. Ninety-seven percent of respondents said they would like to be more involved in management of the forest and 80% that they were willing to pay for the use of a plot. The study concludes that the structural framework laid down by the 2005 Forests Act, which includes provision for the reimplementation of the shamba system under the new plantation establishment and livelihood improvement scheme (PELIS) [It should be noted that whilst the shamba system was re-branded in 2008 under the acronym PELIS, for the sake of simplicity the authors continue to refer to the 'shamba system' and 'shamba farmers' throughout this paper.], is weakened because insufficient power is likely to be devolved to local people, casting them merely as 'forest users' and the shamba system as a 'forest user right'. In so doing the system's potential to both facilitate and embody the participation of local people in forest management is limited and the long-term sustainability of the new system is questionable. Suggested instruments to address this include some degree of sharing of profits from forest timber, performance related guarantees for farmers to gain a new plot and use of joint committees consisting of local people and the forest authorities for long term management of forests.
Resumo:
This paper presents findings of our study on peer-reviewed papers published in the International Conference on Persuasive Technology from 2006 to 2010. The study indicated that out of 44 systems reviewed, 23 were reported to be successful, 2 to be unsuccessful and 19 did not specify whether or not it was successful. 56 different techniques were mentioned and it was observed that most designers use ad hoc definitions for techniques or methods used in design. Hence we propose the need for research to establish unambiguous definitions of techniques and methods in the field.
Resumo:
This paper examines institutional sources of product innovation with reference to the online gaming sector of Korea and the UK. It examines the combined impact of formal and informal institutions and their interaction with multiple case studies. Despite the growing importance of innovative products in contemporary entertainment (including interactive games), the ‘informal’ source of innovation has attracted limited attention. By closely looking at the idea exploration, generation and selection process (where creativity plays a major role), we intend to find out how values and public policy affect product innovation. This study shows that the value of Korean and UK online gaming firms (regardless of their different socio-economic contexts) plays an important role in generating product innovation. An additional point is that Korean firms are likely to take advantage of government policy support to overcome inadequate institutional settings in conjunction with the initial conditions of online game development.
Resumo:
The field of systems thinking is both broad and diverse. This paper tries to provide assistance to outsiders wishing to find out what systems thinking is and also to insiders interested in exploring areas of the systems movement other than their own. A selection of books, papers and articles is given. Each has a full reference and a brief annotation, this being an account of, and a critical comment on, its content. The selection does not aim to be definitive or authoritative and obviously displays the predilections of the authors. However, the hope is that it will convey a sense of the intellectual and practical endeavours that, to the authors, constitute systems thinking and that it may aid the exploration of the range of holistic ideas that people have found useful in thinking about and acting in the world.
Resumo:
This study investigated the effects of increased genetic diversity in winter wheat (Triticum aestivum L.), either from hybridization across genotypes or from physical mixing of lines, on grain yield, grain quality, and yield stability in different cropping environments. Sets of pure lines (no diversity), chosen for high yielding ability or high quality, were compared with line mixtures (intermediate level of diversity), and lines crossed with each other in composite cross populations (CCPn, high diversity). Additional populations containing male sterility genes (CCPms) to increase outcrossing rates were also tested. Grain yield, grain protein content, and protein yield were measured at four sites (two organically-managed and two conventionally-managed) over three years, using seed harvested locally in each preceding year. CCPn and mixtures out-yielded the mean of the parents by 2.4% and 3.6%, respectively. These yield differences were consistent across genetic backgrounds but partly inconsistent across cropping environments and years. Yield stability measured by environmental variance was higher in CCPn and CCPms than the mean of the parents. An index of yield reliability tended to be higher in CCPn, CCPms and mixtures than the mean of the parents. Lin and Binns’ superiority values of yield and protein yield were consistently and significantly lower (i.e. better) in the CCPs than in the mean of the parents, but not different between CCPs and mixtures. However, CCPs showed greater early ground cover and plant height than mixtures. When compared with the (locally non-predictable) best-yielding pure line, CCPs and mixtures exhibited lower mean yield and somewhat lower yield reliability but comparable superiority values. Thus, establishing CCPs from smaller sets of high-performing parent lines might optimize their yielding ability. On the whole, the results demonstrate that using increased within-crop genetic diversity can produce wheat crops with improved yield stability and good yield reliability across variable and unpredictable cropping environments.
Resumo:
The research topic of this paper is focused on the analysis of how trade associations perceive lobbying in Brussels and in Brasília. The analysis will be centered on business associations located in Brasília and Brussels as the two core centers of decision-making and as an attraction for the lobbying practice. The underlying principles behind the comparison between Brussels and Brasilia are two. Firstof all because the European Union and Brazil have maintained diplomatic relations since 1960. Through these relations they have built up close historical, cultural, economic and political ties. Their bilateral political relations culminated in 2007 with the establishment of a Strategic Partnership (EEAS website,n.d.). Over the years, Brazil has become a key interlocutor for the EU and it is the most important market for the EU in Latin America (European Commission, 2007). Taking into account the relations between EU and Brazil, this research could contribute to the reciprocal knowledge about the perception of lobby in the respective systems and the importance of the non-market strategy when conducting business. Second both EU and Brazilian systems have a multi-level governance structure: 28 Member States in the EU and 26 Member States in Brazil; in both systems there are three main institutions targeted by lobbying practice. The objective is to compare how differences in the institutional environments affect the perception and practice of lobbying, where institutions are defined as ‘‘regulative, normative, and cognitive structures and activities that provide stability and meaning to social behavior’’ (Peng et al., 2009). Brussels, the self-proclaimed "Capital of Europe”, is the headquarters of the European Union and has one of the highest concentrations of political power in the world. Four of the seven Institutions of the European Union are based in Brussels: the European Parliament, the European Council, the Council and the European Commission (EU website, n.d.). As the power of the EU institutions has grown, Brussels has become a magnet for lobbyists, with the latest estimates ranging from between 15,000 and 30,000 professionals representing companies, industry sectors, farmers, civil society groups, unions etc. (Burson Marsteller, 2013). Brasília is the capital of Brazil and the seat of government of the Federal District and the three branches of the federal government of Brazilian legislative, executive and judiciary. The 4 city also hosts 124 foreign embassies. The presence of the formal representations of companies and trade associations in Brasília is very limited, but the governmental interests remain there and the professionals dealing with government affairs commute there. In the European Union, Brussels has established a Transparency Register that allows the interactions between the European institutions and citizen’s associations, NGOs, businesses, trade and professional organizations, trade unions and think tanks. The register provides citizens with a direct and single access to information about who is engaged in This process is important for the quality of democracy, and for its capacity to deliver adequate policies, matching activities aimed at influencing the EU decision-making process, which interests are being pursued and what level of resources are invested in these activities (Celgene, n.d). It offers a single code of conduct, binding all organizations and self-employed individuals who accept to “play by the rules” in full respect of ethical principles (EC website, n.d). A complaints and sanctions mechanism ensures the enforcement of the rules and addresses suspected breaches of the code. In Brazil, there is no specific legislation regulating lobbying. The National Congress is currently discussing dozens of bills that address regulation of lobbying and the action of interest groups (De Aragão, 2012), but none of them has been enacted for the moment. This work will focus on class lobbying (Oliveira, 2004), which refers to the performance of the federation of national labour or industrial unions, like CNI (National Industry Confederation) in Brazil and the European Banking Federation (EBF) in Brussels. Their performance aims to influence the Executive and Legislative branches in order to defend the interests of their affiliates. When representing unions and federations, class entities cover a wide range of different and, more often than not, conflicting interests. That is why they are limited to defending the consensual and majority interest of their affiliates (Oliveira, 2004). The basic assumption of this work is that institutions matter (Peng et al, 2009) and that the trade associations and their affiliates, when doing business, have to take into account the institutional and regulatory framework where they do business.
Resumo:
The aim of this study was to develop multiparticulate therapeutic systems of alginate (AL) and chitosan (CS) containing triamcinolone (TC) to colonic drug delivery. Multiparticulate systems of AL-CS, prepared by a complex coacervation/ionotropic gelation method, were characterized for morphological and size aspects, swelling degree, encapsulation content and efficiency, in vitro release profile in different environments simulating the gastrointestinal tract (GIT) and in vivo gastrointestinal transit. The systems showed suitable morphological characteristics with particle diameters of approximately 1.6 mm. In simulated gastric environment, at pH 1.2, the capsules presented low degree of swelling and in vitro release of drug. A higher swelling degree was observed in simulated enteric environment, pH 7.5, followed by erosion. Practically all the drug was released after 6 h of in vitro assay. The in vivo analysis of gastrointestinal transit, carried out in rats, showed that the systems passed practically intact through the stomach and did not show the same profile of swelling observed in the in vitro tests. It was possible to verify the presence of capsules in the colonic region of GIT. The results indicate that AL-CS multiparticulate systems can be used as an adjuvant for the preparation of therapeutic systems to colonic delivery of drugs. (C) 2010 Elsevier Ltd. All rights reserved.
Resumo:
Objectives: This study evaluated the bond strength of luting systems for bonding glass fiber posts to root canal dentin. The hypothesis tested was that there are no differences in bond strength of glass fiber posts luted with different cement systems.Methods: Forty bovine incisors were randomly assigned to five different resin cement groups (n=8). After endodontic treatment and crown removal, translucent glass fiber posts were bonded into the root canal using five different luting protocols (self-cured cement and etch-and-rinse adhesive system; dual-cured cement and etch-and-rinse adhesive system; self-cured cement and self-etch adhesive system; dual-cured cement and self-etch adhesive system; and dual-cured self-adhesive cement). Push-out bond strength was evaluated at three different radicular levels: cervical, middle, and apical. The interface between resinous cement and the post was observed using a stereoscopic microscope.Results: Analysis of variance showed a statistically significant difference among the cements (p<0.05) and the root canal thirds (p<0.05). The self-adhesive resinous cement had lower values of retention.Conclusions: The resin cements used with etch-and-rinse and self-etch adhesive systems seem to be adequate for glass fiber post cementation.
Resumo:
Includes bibliography
Resumo:
The present study aimed to identify Eimeria species in young and adult sheep raised under intensive and / or semi-intensive systems of a herd from Umuarama city, Parana State, Brazil using the traditional diagnostic methods and to correlate the infection level/types of infection in the different age/system in this herd. Fecal samples were collected from the rectum of 210 sheep and were subjected to laboratory analysis to differentiate the species. Furthermore, animals were observed to determine the occurrences of the clinical or subclinical forms of eimeriosis. Out of the 210 collected fecal samples, 147 (70%) were positive for Eimeria oocysts, and 101 (47.86%) belonged to young animals that were raised under intensive and / or semi-intensive farming systems. Oocysts from 9 species of Eimeria parasites were identified in the sheep at the following prevalence rates: E. crandallis, 50.0%; E. parva, 21.6%; E. faurei, 8.1%; E. ahsata, 8.1%; E. intricata, 5.4%; E. granulosa, 2.7%; E. ovinoidalis, 2.0%; E. ovina, 1.3%; and E. bakuensis, 0.6%. There were no differences regarding the more frequent Eimeria species among the different ages of animals or between the different farming management systems. Based on these data, E. crandallis was the most prevalent, followed by E. parva and E. faurei species, regardless of the age. Higher parasitism was diagnosed in the young animals that were raised in a confinement regime, and the disease found in the herd was classified as subclinical. Further studies should be conducted in this herd, to verify if the eimeriosis subclinical can cause damage especially in young animals with a high level of infection.
Resumo:
A detailed theoretical study of the 1,7,1l,17-tetraoxa-2,6,12,16-tetraaza-cycloeicosane ligand ([20]AneN(4)O(4)) coordinated to Fe2+, Co2+, Ni2+, Ru2+, Rh2+, and Pd2+ transition metal ions was carried out with the B3LYP method. Two different cases were performed: when nitrogen is the donor atom (1a (q) ) and also with the oxygen as the donor atom (1b (q) ). For all the cases performed in this study 1a (q) structures were always more stable than the 1b (q) ones. Considering each row is possible to see that the energy increases with the increase of the atomic number. The M2+ cation binding energies for the 1a (q) complexes increase with the following order: Fe2+ < Ru2+ < Co2+ < Ni2+ < Rh2+ < Pd2+.
Resumo:
OSCILLATORY DYNAMICS IN SYSTEMS CONTAINING BROMATE AND 1,4-CYCLOHEXANEDIONE IN ACIDIC MEDIA. I. THE EFFECT OF TEMPERATURE. We present in this work the influence of temperature on the dynamics of homogeneous chemical systems containing bromate and 1,4-cyclohexanedione (1,4-CHD) in acidic media. In particular, the following systems were studied: bromate/1,4-CHD/acid, bromate/1,4-CHD/ferroin/acid and bromate/1,4-CHD/trisbipyridine ruthenium/acid. Investigations were carried out by means of an electrochemical probe, at five temperatures between 5 and 45 degrees C. Activation energies (E-a) were estimated in different ways for the pre-oscillatory and oscillatory regimes. In any case, the E-a was found to depend on the catalyst, composition and initial concentrations. In addition, it was observed that ferroin and trisbipyridine ruthenium act as catalysts only during the transition between the induction period and oscillatory regime.
Effect of drug physicochemical properties on the release from liposomal systems in vitro and in vivo
Resumo:
Liposomes were discovered about 40 years ago by A. Bangham and since then they became very versatile tools in biology, biochemistry and medicine. Liposomes are the smallest artificial vesicles of spherical shape that can be produced from natural untoxic phospholipids and cholesterol. Liposome vesicles can be used as drug carriers and become loaded with a great variety of molecules, such as small drug molecules, proteins, nucleotides and even plasmids. Due to the variability of liposomal compositions they can be used for a large number of applications. In this thesis the β-adrenoceptor antagonists propranolol, metoprolol, atenolol and pindolol, glucose, 18F-Fluorodeoxyglucose (FDG) and Er-DTPA were used for encapsulation in liposomes, characterization and in vitro release studies. Multilamellar vesicles (MLV), large unilamellar vesicles (LUV) and smaller unilamellar vesicles (SUV) were prepared using one of the following lipids: 1,2-Dimyristoyl-sn-Glycero-3-Phosphocholine (DMPC), 1,2-Distearoyl-sn-Glycero-3-Phosphocholine (DSPC), Phospholipone 90H (Ph90H) or a mixture of DSPC and DMPC (1:1). The freeze thawing method was used for preparation of liposomes because it has three advantages (1) avoiding the use of chloroform, which is used in other methods and causes toxicity (2) it is a simple method and (3) it gives high entrapping efficiency. The percentage of entrapping efficiencies (EE) was different depending on the type and phase transition temperature (Tc) of the lipid used. The average particle size and particle size distribution of the prepared liposomes were determined using both dynamic light scattering (DLS) and laser diffraction analyzer (LDA). The average particle size of the prepared liposomes differs according to both liposomal type and lipid type. Dispersion and dialysis techniques were used for the study of the in vitro release of β-adrenoceptor antagonists. The in vitro release rate of β-adrenoceptor antagonists was increased from MLV to LUV to SUV. Regarding the lipid type, β-adrenoceptor antagonists exhibited different in vitro release pattern from one lipid to another. Two different concentrations (50 and 100mg/ml) of Ph90H were used for studying the effect of lipid concentration on the in vitro release of β-adrenoceptor antagonists. It was found that liposomes made from 50 mg/ml Ph90H exhibited higher release rates than liposomes made at 100 mg/ml Ph90H. Also glucose was encapsulated in MLV, LUV and SUV using 1,2-Dimyristoyl-sn-Glycero-3-Phosphocholine (DMPC), 1,2-Distearoyl-sn-Glycero-3-Phosphocholine (DSPC), Phospholipone 90H (Ph90H), soybean lipid (Syb) or a mixture of DSPC and DMPC (1:1). The average particle size and size distribution were determined using laser diffraction analysis. It was found that both EE and average particle size differ depending on both lipid and liposomal types. The in vitro release of glucose from different types of liposomes was performed using a dispersion method. It was found that the in vitro release of glucose from different liposomes is dependent on the lipid type. 18F-FDG was encapsulated in MLV 1,2-Dimyristoyl-sn-Glycero-3-Phosphocholine (DMPC), 1,2-Distearoyl-sn-Glycero-3-Phosphocholine (DSPC), Phospholipone 90H (Ph90H), soybean lipid (Syb) or a mixture of DSPC and DMPC (1:1). FDG-containing LUV and SUV were prepared using Ph90H lipid. The in vitro release of FDG from the different types of lipids was accomplished using a dispersion method. Results similar to that of glucose release were obtained. In vivo imaging of FDG in both uncapsulated FDG and FDG-containing MLV was performed in the brain and the whole body of rats using PET scanner. It was found that the release of FDG from FDG-containing MLV was sustained. In vitro-In vivo correlation was studied using the in vitro release data of FDG from liposomes and in vivo absorption data of FDG from injected liposomes using microPET. Erbium, which is a lanthanide metal, was used as a chelate with DTPA for encapsulation in SUV liposomes for the indirect radiation therapy of cancer. The liposomes were prepared using three different concentrations of soybean lipid (30, 50 and 70 mg/ml). The stability of Er-DTPA SUV liposomes was carried out by storage of the prepared liposomes at three different temperatures (4, 25 and 37 °C). It was found that the release of Er-DTPA complex is temperature dependent, the higher the temperature, the higher the release. There was an inverse relationship between the release of the Er-DTPA complex and the concentration of lipid.
Resumo:
Nanotechnology promises huge benefits for society and capital invested in this new technology is steadily increasing, therefore there is a growing number of nanotechnology products on the market and inevitably engineered nanomaterials will be released in the atmosphere with potential risks to humans and environment. This study set out to extend the comprehension of the impact of metal (Ag, Co, Ni) and metal oxide (CeO2, Fe3O4, SnO2, TiO2) nanoparticles (NPs) on one of the most important environmental compartments potentially contaminated by NPs, the soil system, through the use of chemical and biological tools. For this purpose experiments were carried out to simulate realistic environmental conditions of wet and dry deposition of NPs, considering ecologically relevant endpoints. In detail, this thesis involved the study of three model systems and the evaluation of related issues: (i) NPs and bare soil, to assess the influence of NPs on the functions of soil microbial communities; (ii) NPs and plants, to evaluate the chronic toxicity and accumulation of NPs in edible tissues; (iii) NPs and invertebrates, to verify the effects of NPs on earthworms and the damaging of their functionality. The study highlighted that NP toxicity is generally influenced by NP core elements and the impact of NPs on organisms is specie-specific; moreover experiments conducted in media closer to real conditions showed a decrease in toxicity with respect to in vitro test or hydroponic tests. However, only a multidisciplinary approach, involving physical, chemical and biological skills, together with the use of advanced techniques, such as X-ray absorption fine structure spectroscopy, could pave the way to draw the right conclusions and accomplish a deeper comprehension of the effects of NPs on soil and soil inhabitants.