Making space and place for the knowledge economy : knowledge-based development of Australian cities

The impact of what has been broadly labelled the knowledge economy has been such that, even in the absence of precise measurement, it is the undoubted dynamo of today’s global market, and an essential part of any global city. The socio-economic importance of knowledge production in a knowledge economy is clear, and it is an emerging social phenomenon and research agenda in geographical studies. Knowledge production, and where, how and by whom it is produced, is an urban phenomenon that is poorly understood in an era of strong urbanisation. This paper focuses on knowledge community precincts as the catalytic magnet infrastructures impacting on knowledge production in cities. The paper discusses the increasing importance of knowledge-based urban development within the paradigm of the knowledge economy, and the role of knowledge community precincts as instruments to seed the foundation of knowledge production in cities. This paper explores the knowledge based urban development, and particularly knowledge community precinct development, potentials of Sydney, Melbourne and Brisbane, and benchmarks this against that of Boston, Massachusetts.

MobileMums: A randomized controlled trial of an SMS-based physical activity intervention

Background Postnatal women (<12 months postpartum) are at increased risk of physical inactivity. Purpose To evaluate the efficacy and feasibility of a theory-based physical activity (PA) intervention delivered to postnatal women primarily via mobile telephone short message service (SMS). Methods Eighty-eight women were randomized to the intervention (n=45) or minimal contact control (n=43) condition. The 12-week intervention consisted of a face-to-face PA goal-setting consultation, a goal-setting magnet, three to five personally tailored SMS/week and a nominated support person who received two SMS per week. SMS content targeted constructs of social cognitive theory. Frequency (days/week) and duration (min/week) of PA participation and walking for exercise were assessed via self-report at baseline, 6 and 13 weeks. Results Intervention participants increased PA frequency by 1.82 days/week (SE±0.18) by 13 weeks (F(2,85)=4.46, p=0.038) and walking for exercise frequency by 1.08 days/ week (SE±0.24) by 13 weeks (F(2,85)=5.38, p=0.02). Positive trends were observed for duration (min/week) of PA and walking for exercise. Conclusions Intervention exposure resulted in increased frequency of PA and walking for exercise in postnatal women.

Effect of MHD and heat generation on natural convection flow in an open square cavity under microgravity condition

Purpose - Thermo-magnetic convection and heat transfer of paramagnetic fluid placed in a micro-gravity condition (g = 0) and under a uniform vertical gradient magnetic field in an open square cavity with three cold sidewalls have been studied numerically. Design/methodology/approach - This magnetic force is proportional to the magnetic susceptibility and the gradient of the square of the magnetic induction. The magnetic susceptibility is inversely proportional to the absolute temperature based on Curie’s law. Thermal convection of a paramagnetic fluid can therefore take place even in zero-gravity environment as a direct consequence of temperature differences occurring within the fluid due to a constant internal heat generation placed within a magnetic field gradient. Findings - Effects of magnetic Rayleigh number, Ra, Prandtl number, Pr, and paramagnetic fluid parameter, m, on the flow pattern and isotherms as well as on the heat absorption are presented graphically. It is found that the heat transfer rate is suppressed in increased of the magnetic Rayleigh number and the paramagnetic fluid parameter for the present investigation. Originality/value - It is possible to control the buoyancy force by using the super conducting magnet. To the best knowledge of the author no literature related to magnetic convection for this configuration is available.

Problems in the assessment of magnesium depletion in the rat by in vivo 31P NMR

Prior in vitro studies, utilizing 31Pn uclear magnetic resonance (31PN MR) to measure the chemical shift (CT) of 0-ATP and lengthening of the phosphocreatine spin-spin (7"') relaxation time, suggested an assessment of their efficacy in measuring magnesium depletion in vivo. Dietary magnesium depletion (Me$) produced markedly lower magnesium in plasma (0.44 vs 1. I3 mmol/liter) and bone (1 30 vs 190 pmol/g) but much smaller changes in muscle (41 vs 45 pmol/g, P < 0.01), heart (42.5 vs 44.6 prnol/g), and brain (30 vs 32 pmollg). NMR experiments in anesthetized rats in a Bruker 7-T vertical bore magnet showed that in M e $ rats there was a significant change in brain j3-ATP shift (16.15 vs 16.03 ppm, P < 0.05). These chemical shifts gave a calculated free [Mg"] of 0.71 mM (control) and 0.48 mM (MgZ+$). In muscle the change in j3-ATP shift was not significant (Me$ 15.99 ppm, controls 15.96 ppm), corresponding to a calculated free M P of 0.83 and 0.95 mM, respectively. Phosphccreatine Tz (Carr-Purcell, spin-echo pulse sequence) was no different with M e $ in muscle in vivo (surface coil) (M$+$ 136, control 142 ms) or in isolated perfused hearts (Helmholtz coil) (control 83, M e $ 92 ms). 3'P NMR is severely limited in its ability to detect dietary magnesium depletion in vivo. Measurement of j3-ATP shift in brain may allow studies of the effects of interaction in group studies but does not allow prediction of an individual magnesium status.

Moving MobileMums forward: protocol for a larger randomized controlled trial of an improved physical activity program for women with young children

Background: Women with young children (under 5 years) are a key population group for physical activity intervention. Previous evidence highlights the need for individually tailored programs with flexible delivery mechanisms for this group. Our previous pilot study suggested that an intervention primarily delivered via mobile phone text messaging (MobileMums) increased self-reported physical activity in women with young children. An improved version of the MobileMums program is being compared with a minimal contact control group in a large randomised controlled trial (RCT). Methods/design: This RCT will evaluate the efficacy, feasibility and acceptability, cost-effectiveness, mediators and moderators of the MobileMums program. Primary (moderate-vigorous physical activity) and secondary (intervention implementation data, health service use costs, intervention costs, health benefits, theoretical constructs) outcomes are assessed at baseline, 3-months (end of intervention) and 9-months (following 6-month no contact: maintenance period). The trial is registered with the Australian New Zealand Clinical Trials Registry (ACTRN12611000481976; https://www.anzctr.org.au/Trial/Registration/TrialReview.aspx?id=336109).The intervention commences with a face-to-face session with a behavioural counsellor to initiate rapport and gather information for tailoring the 12-week text message program. During the program participants also have access to a: MobileMums Participant Handbook, MobileMums refrigerator magnet, MobileMums Facebook(C) group, and a MobileMums website with a searchable, on-line exercise directory. A nominated support person also receives text messages for 12-weeks encouraging them to offer their MobileMum social support for physical activity. Discussion: Results of this trial will determine the efficacy and cost-effectiveness of the MobileMums program, and the feasibility of delivering it in a community setting. It will inform the broader literature of physical activity interventions for women with young children and determine whether further investment in the translation of the program is warranted.

Design considerations in an indirectly coupled multilevel motor controller

Permanent magnet (PM) motors utilising ironless stator structures have been incorporated into a wide variety of applications where high efficiency and stringent torque control are required. With recent developments in magnetic materials, improved design strategies, and power outputs of up to 40kW, PM motors have become an attractive candidate for traction drives in electric and hybrid electric vehicles. However, due to their large air gaps and ironless stators these motors can have inductances as low as 2μH, imposing increased requirements on the converter to minimise current ripple. Multilevel converters with n cells can effectively increase the motor inductance by a factor of n2 and are an excellent approach to minimise the motor ripple current. Furthermore by indirectly coupling the outputs of each cell, improvements in converter input and cell ripple current can also be realised. This paper examines the issues in designing a high current indirectly coupled multilevel motor controller for an ironless BLDC traction drive and highlights the limitations of the common ladder core structure.

Ironless wheel motor for a direct drive vehicle application

An ironless motor for use as direct wheel drive is presented. The motor is intended for use in a lightweight (600kg), low drag, series hybrid commuter vehicle under development at The University of Queensland. The vehicle will utilise these ironless motors in each of its rear wheels, with each motor producing a peak torque output of 500Nm and a maximum rotational speed of 1500rpm. The axial flux motor consists of twin Ironless litz wire stators with a central magnetic ring and simplified Halbach magnet arrays on either side. A small amount of iron is used to support the outer Halbach arrays and to improve the peak magnetic flux density. Ducted air cooling is used to remove heat from the motor and will allow for a continuous torque rating of 250Nm. Ironless machines have previously been shown to be effective in high speed, high frequency applications (+1000Hz). They are generally regarded as non-optimal for low speed applications as iron cores allow for better magnet utilisation and do not significantly increase the weight of a machine. However, ironless machines can also be seen to be effective in applications where the average torque requirement is much lower than the peak torque requirement such as in some vehicle drive applications. The low spinning losses in ironless machines are shown to result in very high energy throughput efficiency in a wide range of vehicle driving cycles.

Impacts of different wind power generators on power system small signal and transient stability

With the ever-increasing penetration level of wind power, the impacts of wind power on the power system are becoming more and more significant. Hence, it is necessary to systematically examine its impacts on the small signal stability and transient stability in order to find out countermeasures. As such, a comprehensive study is carried out to compare the dynamic performances of power system respectively with three widely-used power generators. First, the dynamic models are described for three types of wind power generators, i. e. the squirrel cage induction generator (SCIG), doubly fed induction generator (DFIG) and permanent magnet generator (PMG). Then, the impacts of these wind power generators on the small signal stability and transient stability are compared with that of a substituted synchronous generator (SG) in the WSCC three-machine nine-bus system by the eigenvalue analysis and dynamic time-domain simulations. Simulation results show that the impacts of different wind power generators are different under small and large disturbances.

Investigation of the effects of various types of wind turbine generators on power-system stability

It has become more and more demanding to investigate the impacts of wind farms on power system operation as ever-increasing penetration levels of wind power have the potential to bring about a series of dynamic stability problems for power systems. This paper undertakes such an investigation through investigating the small signal and transient stabilities of power systems that are separately integrated with three types of wind turbine generators (WTGs), namely the squirrel cage induction generator (SCIG), the doubly fed induction generator (DFIG), and the permanent magnet generator (PMG). To examine the effects of these WTGs on a power system with regard to its stability under different operating conditions, a selected synchronous generator (SG) of the well-known Western Electricity Coordinating Council (WECC three-unit nine-bus system and an eight-unit 24-bus system is replaced in turn by each type of WTG with the same capacity. The performances of the power system in response to the disturbances are then systematically compared. Specifically, the following comparisons are undertaken: (1) performances of the power system before and after the integration of the WTGs; and (2) performances of the power system and the associated consequences when the SCIG, DFIG, or PMG are separately connected to the system. These stability case studies utilize both eigenvalue analysis and dynamic time-domain simulation methods.

Flexible IBE and beyond in the commutative-blinding framework

The cryptographic community has, of late, shown much inventiveness in the creation of powerful new IBE-like primitives that go beyond the basic IBE notion and extend it in many new directions. Virtually all of these “super-IBE” schemes rely on bilinear pairings for their implementation, which they tend to use in a surprisingly small number of different ways: three of them as of this writing. What is interesting is that, among the three main frameworks that we know of so far, one has acted as a veritable magnet for the construction of many of these “generalized IBE” primitives, whereas the other two have not been nearly as fruitful in that respect. This refers to the Commutative Blinding framework defined by the Boneh-Boyen [Bscr ][Bscr ]1 IBE scheme from 2004. The aim of this chapter is to try to shed some light on this approach's popularity, first by comparing its key properties with those of the competing frameworks, and then by providing a number of examples that illustrate how those properties have been used.

Motor controller simulation and embedded implementation for a blood pump

This study was a step forward in modeling, simulation and microcontroller implementation of a high performance control algorithm for the motor of a blood pump. The rotor angle is sensed using three Hall effect sensors and an algorithm is developed to obtain better angular resolution from the three signals for better discrete-time updates of the controller. The performance of the system was evaluated in terms of actual and reference speeds, stator currents and power consumption over a range of reference speeds up to 4000 revolutions per minute. The use of fewer low cost Hall effect sensors compared to expensive high resolution sensors could reduce the cost of blood pumps for total artificial hearts.

Robust speed tracking control of synchronous motors using immersion and invariance

This paper presents a novel control strategy for velocity tracking of Permanent Magnet Synchronous Machines (PMSM). The model of the machine is considered within the port-Hamiltonian framework and a control is designed using concepts of immersion and invariance (I&I) recently developed in the literature. The proposed controller ensures internal stability and output regulation, and it forces integral action on non-passive outputs.

A dual inverter-based supercapacitor direct integration scheme for wind energy conversion systems

Interfacing converters used in connecting energy storage systems like supercapacitors and battery banks to wind power systems introduce additional cost and power losses. This paper therefore presents a direct integration scheme for supercapacitors used in mitigating short-term power fluctuations in wind power systems. This scheme uses a dual inverter topology for both grid connection and interfacing a supercapacitor bank. The main inverter of the dual inverter system is powered by the rectified output of a wind turbine-coupled permanent-magnet synchronous generator. The auxiliary inverter is directly connected to the supercapacitor bank. With this approach, an interfacing converter is not required, and there are no associated costs and power losses incurred. The operation of the proposed system is discussed in detail. Simulation and experimental results are presented to verify the efficacy of the proposed system in suppressing short-term wind power fluctuations.

Design of a robust grid interface system for PMSG-based wind turbine generators

A robust and reliable grid power interface system for wind turbines using a permanent-magnet synchronous generator (PMSG) is proposed in this paper, where an integration of a generator-side three-switch buck-type rectifier and a grid-side Z-source inverter is employed as a bridge between the generator and the grid. The modulation strategy for the proposed topology is developed from space-vector modulation and Z-source network operation principles. Two PMSG control methods, namely, unity-power-factor control and rotor-flux-orientation control (Id = 0), are studied to establish an optimized control scheme for the generator-side three-switch buck-type rectifier. The system control scheme decouples active- and reactive-power control through voltage-oriented control and optimizes PMSG control for the grid- and generator-side converters independently. Maximum power point tracking is implemented by adjusting the shoot-through duty cycles of the Z-source network. The design considerations of the passive components are also provided. The performances and practicalities of the designed architecture have been verified by simulations and experiments.

A dual inverter based supercapacitor direct integration scheme for wind energy conversion systems

This paper presents a new direct integration scheme for supercapacitors that are used to mitigate short term power fluctuations in wind power systems. The proposed scheme uses the popular dual inverter topology for grid connection as well as interfacing a supercapacitor bank. The dual inverter system is formed by cascading two 2-level inverters named as the “main inverter” and the “auxiliary inverter”. The main inverter is powered by the rectified output of a wind turbine coupled permanent magnet synchronous generator. The auxiliary inverter is directly connected to a super capacitor bank. This approach eliminates the need for an interfacing dc-dc converter for the supercapacitor bank and thus improves the overall efficiency. A detailed analysis on the effects of non-integer dynamically changing voltage ratio is presented. The concept of integrated boost rectifier is used to carry out the Maximum Power Point Tracking (MPPT) of the wind turbine generator. Another novel feature of this paper is the power reference adjuster which effectively manages capacitor charging and discharging at extreme conditions. Simulation results are presented to verify the efficacy of the proposed system in suppressing short term wind power fluctuations.