Anxiolytic-like effects induced by blockade of transient receptor potential vanilloid type 1 (TRPV1) channels in the medial prefrontal cortex of rats

The endocannabinoid anandamide, in addition to activating cannabinoid type 1 receptors (CB1), may act as an agonist at transient receptor potential vanilloid type 1 (TRPV1) channels. In the periaqueductal gray, CB1 activation inhibits, whereas TRPV1 increases, anxiety-like behavior. In the medial prefrontal cortex (mPFC), another brain region related to defensive responses, CB1 activation induces anxiolytic-like effects. However, a possible involvement of TRPV1 is still unclear. In the present study, we tested the hypothesis that TRPV1 channel contributes to the modulation of anxiety-like behavior in the mPFC. Male Wistar rats (n = 5-7 per group) received microinjections of the TRPV1 antagonist capsazepine (1-60 nmol) in the ventral portion of the mPFC and were exposed to the elevated plus maze (EPM) or to the Vogel conflict test. Capsazepine increased exploration of open arms in the EPM as well as the number of punished licks in the Vogel conflict test, suggesting anxiolytic-like effects. No changes in the number of entries into the enclosed arms were observed in the EPM, indicating that there were no changes in motor activity. Moreover, capsazepine did not interfere with water consumption or nociceptive threshold, discarding potential confounding factors for the Vogel conflict test. These data suggest that TRPV1 in the ventral mPFC tonically inhibits anxiety-like behavior. TRPV1 could facilitate defensive responses opposing, therefore, the anxiolytic-like effects reported after local activation of CB1 receptors.

Moderately strong vorticity in a bathtub-type flow

Theoretical and numerical analysis is performed for an inviscid axisymmetric vortical bathtub-type flow. The level of vorticity is kept high so that the image of the flow on the radial-axial plane (r-z plane) is not potential. The most significant findings are: (1) the region of validity of the strong vortex approximation is separated from the drain by a buffer region, (2) the power-law asymptote of the stream function, specified by Delta Psi similar to r(4/3) Deltaz, appears near the axis when vorticity in the flow is sufficiently strong and (3) the local Rossby number in the region of the 4/3 power-law the initial vorticity level in the flow and the global Rossby number.

On the fast approximation of Green's functions in MPIE formulations for planar layered media

The numerical implementation of the complex image approach for the Green's function of a mixed-potential integralequation formulation is examined and is found to be limited to low values of k(0) rho (in this context k(0) rho = 2 pirho/ lambda(0), where rho is the distance between the source and the field points of the Green's function and lambda(0) is the free space wavelength). This is a clear limitation for problems of large dimension or high frequency where this limit is easily exceeded. This paper examines the various strategies and proposes a hybrid method whereby most of the above problems can be avoided. An efficient integral method that is valid for large k(0) rho is combined with the complex image method in order to take advantage of the relative merits of both schemes. It is found that a wide overlapping region exists between the two techniques allowing a very efficient and consistent approach for accurately calculating the Green's functions. In this paper, the method developed for the computation of the Green's function is used for planar structures containing both lossless and lossy media.

Mating behavior of Trissolcus basalis (Wollaston) (Hymenoptera : Scelionidae): Potential for outbreeding in a predominantly inbreeding species

The mating behavior of the quasi-gregarious egg parasitoid Trissolcus basalis (Wollaston) was investigated under field conditions. Trissolcus basalis has female-biased sex ratios and is a protandrous species, with males emerging 1-2 days before females. Males competed aggressively for control of the egg mass, with one male assuming dominance and control of the egg mass, although changes in dominance occurred at least once on each egg mass observed. Typical mating behavior involved the dominant male mating his sisters immediately upon their emergence from the egg mass. These behaviors are characteristic of an inbreeding species that manifests local mate competition. However, several aspects of the mating behavior of T. basalis are inconsistent with that of an inbreeding species. Over 18% of emerging females were not mated by the dominant male upon emergence, 13% of females were not observed to be mated at all and may have left their natal site as virgins, 25% of females were mated multiple times and sometimes by multiple males, females remained near the natal site for up to several hours after emergence before emigrating, and males dispersed away from the natal site during female emergence. Trissolcus basalis may be a predominantly inbreeding species but its emergence and mating behavior suggest that low-frequency outbreeding is also likely to occur.

Micro-mechanical approximation to the stress field around an inclined fiber of FRCC

Matrix spalling or crushing is one of the important mechanisms of fiber-matrix interaction of fiber reinforced cementitious composites (FRCC). The fiber pullout mechanisms have been extensively studied for an aligned fiber but matrix failure is rarely investigated since it is thought not to be a major affect. However, for an inclined fiber, the matrix failure should not be neglected. Due to the complex process of matrix spalling, experimental investigation and analytical study of this mechanism are rarely found in literature. In this paper, it is assumed that the load transfer is concentrated within the short length of the inclined fiber from the exit point towards anchored end and follows the exponential law. The Mindlin formulation is employed to calculate the 3D stress field. The simulation gives much information about this field. The 3D approximation of the stress state around an inclined fiber helps to qualitatively understand the mechanism of matrix failure. Finally, a spalling criterion is proposed by which matrix spalling occurs only when the stress in a certain volume, rather than the stress at a small point, exceeds the material strength. This implies some local stress redistribution after first yield. The stress redistribution results in more energy input and higher load bearing capacity of the matrix. In accordance with this hypothesis, the evolution of matrix spalling is demonstrated. The accurate prediction of matrix spalling needs the careful determination of the parameters in this model. This is the work of further study. (C) 2002 Elsevier Science Ltd. All rights reserved.

Improving FEM crash simulation accuracy through local thickness estimation based on CAD data

In this paper, we present a method for estimating local thickness distribution in nite element models, applied to injection molded and cast engineering parts. This method features considerable improved performance compared to two previously proposed approaches, and has been validated against thickness measured by di erent human operators. We also demonstrate that the use of this method for assigning a distribution of local thickness in FEM crash simulations results in a much more accurate prediction of the real part performance, thus increasing the bene ts of computer simulations in engineering design by enabling zero-prototyping and thus reducing product development costs. The simulation results have been compared to experimental tests, evidencing the advantage of the proposed method. Thus, the proposed approach to consider local thickness distribution in FEM crash simulations has high potential on the product development process of complex and highly demanding injection molded and casted parts and is currently being used by Ford Motor Company.

Survey of cyclopids (Crustacea, Copepoda) in Brazil and preliminary screening of their potential as dengue vector predators

INTRODUCTION: Cyclopid copepods are known to be good mosquito controllers, specially as regards the larvae of the dengue vectors Aedes aegypti and Ae. albopictus. MATERIAL AND METHOD: The objective of the study was to survey the local copepod fauna and search for new strains of M. longisetus var. longisetus, comparing the potential of the samples found with the current strain ML-01 against Ae. albopictus larvae, under laboratory conditions. Eleven bodies of water in Campinas, SP, Brazil, were screened for copepods by collecting 1.5 l of water from each of then. The predatory potential of adults copepods was evaluated over 24 h, in the laboratory, for groups of 5 individuals preying upon 30 first instar Ae. albopictus larvae. RESULTS AND CONCLUSION: The following cyclopid species were found: Metacyclops mendocinus, Tropocyclops prasinus, Eucyclops sp, Eucyclops serrulatus, Eucyclops solitarius, Eucyclops ensifer, Macrocyclops albidus var. albidus and Mesocyclops longisetus var. longisetus. The predatory potential of these copepods ranged from nil to 97.3%. A sample collected in the field containing only M. longisetus var. longisetus showed the best control efficiency with no significant difference from a three-year old laboratory culture (ML-01) of the same species evaluated for comparison. The sample with few M. albidus var. albidus was ranked in second place showing an average 25.9% efficiency. The use of copepods in trap tires as dengue vector controllers is discussed.

An Evaluation of Local Feature Combiners for Robot Visual Localization

In the last decade, local image features have been widely used in robot visual localization. To assess image similarity, a strategy exploiting these features compares raw descriptors extracted from the current image to those in the models of places. This paper addresses the ensuing step in this process, where a combining function must be used to aggregate results and assign each place a score. Casting the problem in the multiple classifier systems framework, we compare several candidate combiners with respect to their performance in the visual localization task. A deeper insight into the potential of the sum and product combiners is provided by testing two extensions of these algebraic rules: threshold and weighted modifications. In addition, a voting method, previously used in robot visual localization, is assessed. All combiners are tested on a visual localization task, carried out on a public dataset. It is experimentally demonstrated that the sum rule extensions globally achieve the best performance. The voting method, whilst competitive to the algebraic rules in their standard form, is shown to be outperformed by both their modified versions.

Application of genetic algorithms in the design of an electrical potential of fractional order

Fractional calculus (FC) is currently being applied in many areas of science and technology. In fact, this mathematical concept helps the researches to have a deeper insight about several phenomena that integer order models overlook. Genetic algorithms (GA) are an important tool to solve optimization problems that occur in engineering. This methodology applies the concepts that describe biological evolution to obtain optimal solution in many different applications. In this line of thought, in this work we use the FC and the GA concepts to implement the electrical fractional order potential. The performance of the GA scheme, and the convergence of the resulting approximation, are analyzed. The results are analyzed for different number of charges and several fractional orders.

Global localization with non-quantized local image features

In the field of appearance-based robot localization, the mainstream approach uses a quantized representation of local image features. An alternative strategy is the exploitation of raw feature descriptors, thus avoiding approximations due to quantization. In this work, the quantized and non-quantized representations are compared with respect to their discriminativity, in the context of the robot global localization problem. Having demonstrated the advantages of the non-quantized representation, the paper proposes mechanisms to reduce the computational burden this approach would carry, when applied in its simplest form. This reduction is achieved through a hierarchical strategy which gradually discards candidate locations and by exploring two simplifying assumptions about the training data. The potential of the non-quantized representation is exploited by resorting to the entropy-discriminativity relation. The idea behind this approach is that the non-quantized representation facilitates the assessment of the distinctiveness of features, through the entropy measure. Building on this finding, the robustness of the localization system is enhanced by modulating the importance of features according to the entropy measure. Experimental results support the effectiveness of this approach, as well as the validity of the proposed computation reduction methods.

Robot visual localization through local feature fusion: an evaluation of multiple classifiers combination approaches

In the last decade, local image features have been widely used in robot visual localization. In order to assess image similarity, a strategy exploiting these features compares raw descriptors extracted from the current image with those in the models of places. This paper addresses the ensuing step in this process, where a combining function must be used to aggregate results and assign each place a score. Casting the problem in the multiple classifier systems framework, in this paper we compare several candidate combiners with respect to their performance in the visual localization task. For this evaluation, we selected the most popular methods in the class of non-trained combiners, namely the sum rule and product rule. A deeper insight into the potential of these combiners is provided through a discriminativity analysis involving the algebraic rules and two extensions of these methods: the threshold, as well as the weighted modifications. In addition, a voting method, previously used in robot visual localization, is assessed. Furthermore, we address the process of constructing a model of the environment by describing how the model granularity impacts upon performance. All combiners are tested on a visual localization task, carried out on a public dataset. It is experimentally demonstrated that the sum rule extensions globally achieve the best performance, confirming the general agreement on the robustness of this rule in other classification problems. The voting method, whilst competitive with the product rule in its standard form, is shown to be outperformed by its modified versions.

Bioactive beads for local sensing of proteases in 3D engineered tissues

Dissertação para obtenção do Grau de Doutor em Bioengenharia (MIT)

Designation of natural monuments by the local administration: the example of Viana do Castelo municipality and its engagement with geoconservation (NW Portugal)

"First online: 11 April 2016"

Aplicación potencial de probióticos para la prevención y control de la matitis bovina. Potential aplication of probiotics for prevention and control of bovine mastitis.

Ubicada en el centro del país, Río Cuarto pertenece a las cuencas lecheras más importantes del país, localizadas en las provincias de Córdoba, Santa Fe, Entre Ríos y Buenos Aires. Córdoba, con una producción promedio anual de 2,4 mil millones de litros, contribuye con un 25 por ciento a la producción nacional que según informe de la Secretaría de Agricultura Ganadería y Pesca de la Nación (2006) ha alcanzado los 9.000 millones de litros al año, ubicándose en segundo lugar después de Santa Fe. La mastitis bovina es responsable de las mayores pérdidas económicas dentro del rodeo lechero, debido a los elevados costos de la terapia antibiótica, al retiro del animal del circuito productivo, y a las consecuencias negativas ocasionadas en la reproducción. Diferentes estrategias se han desarrollado en el país y el mundo, tendientes a minimizar los problemas ocasionados por la enfermedad. De ellos, la desinfección pre y post-ordeñe y la terapia con antibióticos al secado, son los métodos de control más ampliamente utilizados. Las terapias con antibióticos, formuladas para uso intramamario, frecuentemente resultan ineficientes para prevenir o eliminar las infecciones crónicas producidas por S. aureus, principal agente causal de la enfermedad. A ello se suma el aumento en la frecuencia de cepas resistentes a los antibióticos, por lo que existen presiones cada vez mayores por parte de los entes reguladores para limitar el uso de los mismos en el ganado. La ineficacia de estos procedimientos para reducir la tasa de nuevas infecciones ha orientado la investigación hacia la búsqueda de métodos de control alternativos basados en el desarrollo de vacunas, inmunomoduladores o sustancias naturales, como un enfoque racional para controlar infecciones en animales utilizados en la producción de alimentos, o bien a la aplicación de medidas preventivas. El presente proyecto aborda el tema de la prevención de la mastitis bovina a través del estudio de una cepa de BL con propiedades probióticas en ensayos de inoculación in vivo en glándulas mamarias de bovinos para su futura aplicación en la prevención de la mastitis bovina. En particular se propone a) Determinar la capacidad de las BL seleccionada como potencial probiótico, a partir del aislamiento realizado por nuestro grupo de investigación y de otras previamente caracterizadas en el CERELA, para adherirse y colonizar el canal del pezón de la ubre, b) Profundizar en el estudio de los mecanismos involucrados en el efecto (benéfico o adverso) de la administración local de BL en el canal del pezón de la glándula mamaria y c) Estudiar las condiciones físico-químicas para la obtención de biomasa de BL y sustancias antagónicas. El proyecto sentará las bases para, en un futuro cercano, realizar el diseño de un producto a base de probióticos lo cual será un importante aporte socio-comunitario a la prevención de la mastitis bovina de altísima incidencia. El desarrollo de un producto con estas características permitirá la articulación con el sector productivo.

Programa de capacitación y de ejecución de acciones para favorecer el desarrollo del potencial exportador de las empresas pequeñas y medianas de Río Cuarto y región.Capacitation Programs to Encouraged Development of Rio Cuarto and Region Exports Potential.

Identificación: Programa de capacitación y de ejecución de acciones para favorecer el desarrollo del potencial exportador de las empresas pequeñas y medianas de Río Cuarto y región. Caracterización del problema objeto de estudio: La zona de influencia de la ciudad de Río Cuarto posee, por su ubicación y características naturales, un potencial exportador no explotado, considerando la actual dinámica de los mercados internacionales. La ciudad está en el cruce de rutas nacionales que la conecta a las principales ciudades del MERCOSUR, con salida al Pacífico y al Atlántico y conexión rápida a rutas que van hacia la frontera norte del país. A modo de presentación de situaciones favorables, en el caso de Bolivia es para aprovechar el prestigio de los productos argentinos en ese mercado y las ventajas que las empresas chicas y medianas pueden disponer al no existir barreras idiomáticas, razonables requisitos de calidad y una gran necesidad de productos elaborados que pueden ser ofertados por PYMES regionales.En el caso de Chile importan tres aspectos: primero, la cercanía geográfica a la zona de Río Cuarto, ya que se accede en forma directa por vía terrestre, con una distancia de sólo 900 Km. respecto a la zona metropolitana de ese país; segundo, es el mercado regional con mayores niveles de exigencia para acceder al mismo, constituyendo por lo tanto una buena plataforma de aprendizaje para lograr el acceso luego al mundo desarrollado; tercero, al tener Chile firmado acuerdos de libre comercio con mercados que suman 3500 millones de habitantes, con acceso directo al cinturón del Pacífico, que es la zona más dinámica del comercio mundial actual, ese país necesita complementarse con sus vecinos para poder aprovechar las demandas potenciales de esos mercados.Con el proyecto se pretende contribuir a acentuar la internacionalización económica de la ciudad de Río Cuarto y su región circundante. Hipótesis:Se puede generar un polo exportador pyme a partir de la actividad sistemática de un programa de difusión de conocimientos sobre el comercio exterior, lo que contribuirá a profundizar la sustentabilidad económica de Río Cuarto y su región circundante.Objetivos: -a) Crear, desde el programa, una oferta de capacitación y asesoramiento que satisfaga los interrogantes y necesidades de las empresas pequeñas y medianas que busquen iniciarse en la actividad de exportación. b) Promover la formación de consorcios y formas asociativas, sobre todo de pequeñas y medianas empresas, para expandir el comercio exterior regional. c) Difundir las posibilidades de inserción internacional de las pymes regionales y sus requerimientos en los aspectos productivos y de comercialización. Estos últimos suelen constituir puntos críticos en el desarrollo exportador de las firmas. d) Analizar las posibilidades competitivas en el comercio internacional, en especial en el área del MERCOSUR, de cluster Materiales y Métodos a Utilizar: - Elaboración de un Monitor de Expectativas Empresariales con el objetivo de cuantificar la actual y la potencial Oferta Exportadora Regional. - Desarrollo de Análisis Sectoriales para determinar las posibilidades de incrementar las ventas al exterior de productos regionales. - Creación de Informes Especiales sobre Productos Regionales, los cuales le permitirán a Pequeños y Medianos Productores conocer en detalle, las oportunidades y exigencias para ingresar a los mercados externos, especialmente al área del MERCOSUR. - Organización de Viajes y Rondas de Negocios con el fin de fortalecer los lazos comerciales y culturales del empresariado local y extranjero. Resultados Esperados: - Profundizar conocimientos sobre las posibilidades que poseen los productos regionales de ingresar a los mercados externos. - Lograr una difusión generalizada de conocimientos sobre el Comercio Exterior, brindándole a las Pymes las herramientas básicas y fundamentales para que puedan desarrollar su potencial exportador.